All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Bjorn Andersson <andersson@kernel.org>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH v3 17/27] drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format
Date: Fri,  3 Feb 2023 20:21:22 +0200	[thread overview]
Message-ID: <20230203182132.1307834-18-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230203182132.1307834-1-dmitry.baryshkov@linaro.org>

Rewrite dpu_plane's QoS related functions to take struct dpu_sw_pipe and
struct dpu_format as arguments rather than fetching them from the
pstate or drm_framebuffer.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 98 +++++++++++------------
 1 file changed, 47 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 5aabf9694a53..ee261a591d45 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -128,19 +128,18 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane)
 /**
  * _dpu_plane_calc_bw - calculate bandwidth required for a plane
  * @plane: Pointer to drm plane.
- * @fb:   Pointer to framebuffer associated with the given plane
+ * @fmt: Pointer to source buffer format
  * @pipe_cfg: Pointer to pipe configuration
  * Result: Updates calculated bandwidth in the plane state.
  * BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
  * Prefill BW Equation: line src bytes * line_time
  */
 static void _dpu_plane_calc_bw(struct drm_plane *plane,
-	struct drm_framebuffer *fb,
+	const struct dpu_format *fmt,
 	struct dpu_hw_sspp_cfg *pipe_cfg)
 {
 	struct dpu_plane_state *pstate;
 	struct drm_display_mode *mode;
-	const struct dpu_format *fmt = NULL;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 	int src_width, src_height, dst_height, fps;
 	u64 plane_prefill_bw;
@@ -152,8 +151,6 @@ static void _dpu_plane_calc_bw(struct drm_plane *plane,
 	pstate = to_dpu_plane_state(plane->state);
 	mode = &plane->state->crtc->mode;
 
-	fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier);
-
 	src_width = drm_rect_width(&pipe_cfg->src_rect);
 	src_height = drm_rect_height(&pipe_cfg->src_rect);
 	dst_height = drm_rect_height(&pipe_cfg->dst_rect);
@@ -217,25 +214,25 @@ static void _dpu_plane_calc_clk(struct drm_plane *plane, struct dpu_hw_sspp_cfg
 /**
  * _dpu_plane_calc_fill_level - calculate fill level of the given source format
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  * @fmt:		Pointer to source buffer format
  * @src_width:		width of source buffer
  * Return: fill level corresponding to the source buffer/format or 0 if error
  */
 static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
+		struct dpu_sw_pipe *pipe,
 		const struct dpu_format *fmt, u32 src_width)
 {
 	struct dpu_plane *pdpu;
-	struct dpu_plane_state *pstate;
 	u32 fixed_buff_size;
 	u32 total_fl;
 
-	if (!fmt || !plane->state || !src_width || !fmt->bpp) {
+	if (!fmt || !pipe || !src_width || !fmt->bpp) {
 		DPU_ERROR("invalid arguments\n");
 		return 0;
 	}
 
 	pdpu = to_dpu_plane(plane);
-	pstate = to_dpu_plane_state(plane->state);
 	fixed_buff_size = pdpu->catalog->caps->pixel_ram_size;
 
 	/* FIXME: in multirect case account for the src_width of all the planes */
@@ -251,7 +248,7 @@ static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
 				((src_width + 32) * fmt->bpp);
 		}
 	} else {
-		if (pstate->pipe.multirect_mode == DPU_SSPP_MULTIRECT_PARALLEL) {
+		if (pipe->multirect_mode == DPU_SSPP_MULTIRECT_PARALLEL) {
 			total_fl = (fixed_buff_size / 2) * 2 /
 				((src_width + 32) * fmt->bpp);
 		} else {
@@ -261,7 +258,7 @@ static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
 	}
 
 	DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s w:%u fl:%u\n",
-			pdpu->pipe - SSPP_VIG0,
+			pipe->sspp->idx - SSPP_VIG0,
 			(char *)&fmt->base.pixel_format,
 			src_width, total_fl);
 
@@ -271,25 +268,22 @@ static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
 /**
  * _dpu_plane_set_qos_lut - set QoS LUT of the given plane
  * @plane:		Pointer to drm plane
- * @fb:			Pointer to framebuffer associated with the given plane
+ * @pipe:		Pointer to software pipe
+ * @fmt:		Pointer to source buffer format
  * @pipe_cfg:		Pointer to pipe configuration
  */
 static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
-		struct drm_framebuffer *fb, struct dpu_hw_sspp_cfg *pipe_cfg)
+		struct dpu_sw_pipe *pipe,
+		const struct dpu_format *fmt, struct dpu_hw_sspp_cfg *pipe_cfg)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
-	const struct dpu_format *fmt = NULL;
 	u64 qos_lut;
 	u32 total_fl = 0, lut_usage;
 
 	if (!pdpu->is_rt_pipe) {
 		lut_usage = DPU_QOS_LUT_USAGE_NRT;
 	} else {
-		fmt = dpu_get_dpu_format_ext(
-				fb->format->format,
-				fb->modifier);
-		total_fl = _dpu_plane_calc_fill_level(plane, fmt,
+		total_fl = _dpu_plane_calc_fill_level(plane, pipe, fmt,
 				drm_rect_width(&pipe_cfg->src_rect));
 
 		if (fmt && DPU_FORMAT_IS_LINEAR(fmt))
@@ -301,7 +295,7 @@ static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
 	qos_lut = _dpu_hw_get_qos_lut(
 			&pdpu->catalog->perf->qos_lut_tbl[lut_usage], total_fl);
 
-	trace_dpu_perf_set_qos_luts(pdpu->pipe - SSPP_VIG0,
+	trace_dpu_perf_set_qos_luts(pipe->sspp->idx - SSPP_VIG0,
 			(fmt) ? fmt->base.pixel_format : 0,
 			pdpu->is_rt_pipe, total_fl, qos_lut, lut_usage);
 
@@ -310,20 +304,20 @@ static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
 			fmt ? (char *)&fmt->base.pixel_format : NULL,
 			pdpu->is_rt_pipe, total_fl, qos_lut);
 
-	pstate->pipe.sspp->ops.setup_creq_lut(pstate->pipe.sspp, qos_lut);
+	pipe->sspp->ops.setup_creq_lut(pipe->sspp, qos_lut);
 }
 
 /**
  * _dpu_plane_set_danger_lut - set danger/safe LUT of the given plane
  * @plane:		Pointer to drm plane
- * @fb:			Pointer to framebuffer associated with the given plane
+ * @pipe:		Pointer to software pipe
+ * @fmt:		Pointer to source buffer format
  */
 static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
-		struct drm_framebuffer *fb)
+		struct dpu_sw_pipe *pipe,
+		const struct dpu_format *fmt)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
-	const struct dpu_format *fmt = NULL;
 	u32 danger_lut, safe_lut;
 
 	if (!pdpu->is_rt_pipe) {
@@ -332,10 +326,6 @@ static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
 		safe_lut = pdpu->catalog->perf->safe_lut_tbl
 				[DPU_QOS_LUT_USAGE_NRT];
 	} else {
-		fmt = dpu_get_dpu_format_ext(
-				fb->format->format,
-				fb->modifier);
-
 		if (fmt && DPU_FORMAT_IS_LINEAR(fmt)) {
 			danger_lut = pdpu->catalog->perf->danger_lut_tbl
 					[DPU_QOS_LUT_USAGE_LINEAR];
@@ -362,29 +352,30 @@ static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
 		danger_lut,
 		safe_lut);
 
-	pstate->pipe.sspp->ops.setup_danger_safe_lut(pstate->pipe.sspp,
+	pipe->sspp->ops.setup_danger_safe_lut(pipe->sspp,
 			danger_lut, safe_lut);
 }
 
 /**
  * _dpu_plane_set_qos_ctrl - set QoS control of the given plane
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  * @enable:		true to enable QoS control
  * @flags:		QoS control mode (enum dpu_plane_qos)
  */
 static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
+	struct dpu_sw_pipe *pipe,
 	bool enable, u32 flags)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_hw_pipe_qos_cfg pipe_qos_cfg;
 
 	memset(&pipe_qos_cfg, 0, sizeof(pipe_qos_cfg));
 
 	if (flags & DPU_PLANE_QOS_VBLANK_CTRL) {
-		pipe_qos_cfg.creq_vblank = pstate->pipe.sspp->cap->sblk->creq_vblank;
+		pipe_qos_cfg.creq_vblank = pipe->sspp->cap->sblk->creq_vblank;
 		pipe_qos_cfg.danger_vblank =
-				pstate->pipe.sspp->cap->sblk->danger_vblank;
+				pipe->sspp->cap->sblk->danger_vblank;
 		pipe_qos_cfg.vblank_en = enable;
 	}
 
@@ -410,33 +401,34 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
 		pipe_qos_cfg.danger_vblank,
 		pdpu->is_rt_pipe);
 
-	pstate->pipe.sspp->ops.setup_qos_ctrl(pstate->pipe.sspp,
+	pipe->sspp->ops.setup_qos_ctrl(pipe->sspp,
 			&pipe_qos_cfg);
 }
 
 /**
  * _dpu_plane_set_ot_limit - set OT limit for the given plane
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  * @crtc:		Pointer to drm crtc
  * @pipe_cfg:		Pointer to pipe configuration
  */
 static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
+		struct dpu_sw_pipe *pipe,
 		struct drm_crtc *crtc, struct dpu_hw_sspp_cfg *pipe_cfg)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_vbif_set_ot_params ot_params;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	memset(&ot_params, 0, sizeof(ot_params));
-	ot_params.xin_id = pstate->pipe.sspp->cap->xin_id;
-	ot_params.num = pstate->pipe.sspp->idx - SSPP_NONE;
+	ot_params.xin_id = pipe->sspp->cap->xin_id;
+	ot_params.num = pipe->sspp->idx - SSPP_NONE;
 	ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
 	ot_params.height = drm_rect_height(&pipe_cfg->src_rect);
 	ot_params.is_wfd = !pdpu->is_rt_pipe;
 	ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
 	ot_params.vbif_idx = VBIF_RT;
-	ot_params.clk_ctrl = pstate->pipe.sspp->cap->clk_ctrl;
+	ot_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
 	ot_params.rd = true;
 
 	dpu_vbif_set_ot_limit(dpu_kms, &ot_params);
@@ -445,19 +437,20 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 /**
  * _dpu_plane_set_qos_remap - set vbif QoS for the given plane
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  */
-static void _dpu_plane_set_qos_remap(struct drm_plane *plane)
+static void _dpu_plane_set_qos_remap(struct drm_plane *plane,
+		struct dpu_sw_pipe *pipe)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_vbif_set_qos_params qos_params;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	memset(&qos_params, 0, sizeof(qos_params));
 	qos_params.vbif_idx = VBIF_RT;
-	qos_params.clk_ctrl = pstate->pipe.sspp->cap->clk_ctrl;
-	qos_params.xin_id = pstate->pipe.sspp->cap->xin_id;
-	qos_params.num = pstate->pipe.sspp->idx - SSPP_VIG0;
+	qos_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
+	qos_params.xin_id = pipe->sspp->cap->xin_id;
+	qos_params.num = pipe->sspp->idx - SSPP_VIG0;
 	qos_params.is_rt = pdpu->is_rt_pipe;
 
 	DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d, clk_ctrl:%d\n",
@@ -1144,7 +1137,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 	pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
 	pdpu->is_rt_pipe = is_rt_pipe;
 
-	_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
+	_dpu_plane_set_qos_ctrl(plane, pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
 	DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
 			", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
@@ -1213,20 +1206,20 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 		}
 	}
 
-	_dpu_plane_set_qos_lut(plane, fb, &pipe_cfg);
-	_dpu_plane_set_danger_lut(plane, fb);
+	_dpu_plane_set_qos_lut(plane, pipe, fmt, &pipe_cfg);
+	_dpu_plane_set_danger_lut(plane, pipe, fmt);
 
 	if (plane->type != DRM_PLANE_TYPE_CURSOR) {
-		_dpu_plane_set_qos_ctrl(plane, true, DPU_PLANE_QOS_PANIC_CTRL);
-		_dpu_plane_set_ot_limit(plane, crtc, &pipe_cfg);
+		_dpu_plane_set_qos_ctrl(plane, pipe, true, DPU_PLANE_QOS_PANIC_CTRL);
+		_dpu_plane_set_ot_limit(plane, pipe, crtc, &pipe_cfg);
 	}
 
 	if (pstate->needs_qos_remap) {
 		pstate->needs_qos_remap = false;
-		_dpu_plane_set_qos_remap(plane);
+		_dpu_plane_set_qos_remap(plane, pipe);
 	}
 
-	_dpu_plane_calc_bw(plane, fb, &pipe_cfg);
+	_dpu_plane_calc_bw(plane, fmt, &pipe_cfg);
 
 	_dpu_plane_calc_clk(plane, &pipe_cfg);
 }
@@ -1263,11 +1256,13 @@ static void dpu_plane_atomic_update(struct drm_plane *plane,
 static void dpu_plane_destroy(struct drm_plane *plane)
 {
 	struct dpu_plane *pdpu = plane ? to_dpu_plane(plane) : NULL;
+	struct dpu_plane_state *pstate;
 
 	DPU_DEBUG_PLANE(pdpu, "\n");
 
 	if (pdpu) {
-		_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
+		pstate = to_dpu_plane_state(plane->state);
+		_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
 		mutex_destroy(&pdpu->lock);
 
@@ -1395,13 +1390,14 @@ static void dpu_plane_reset(struct drm_plane *plane)
 void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	if (!pdpu->is_rt_pipe)
 		return;
 
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
-	_dpu_plane_set_qos_ctrl(plane, enable, DPU_PLANE_QOS_PANIC_CTRL);
+	_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
 	pm_runtime_put_sync(&dpu_kms->pdev->dev);
 }
 #endif
-- 
2.39.1


WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: freedreno@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <andersson@kernel.org>,
	dri-devel@lists.freedesktop.org,
	Stephen Boyd <swboyd@chromium.org>
Subject: [PATCH v3 17/27] drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format
Date: Fri,  3 Feb 2023 20:21:22 +0200	[thread overview]
Message-ID: <20230203182132.1307834-18-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230203182132.1307834-1-dmitry.baryshkov@linaro.org>

Rewrite dpu_plane's QoS related functions to take struct dpu_sw_pipe and
struct dpu_format as arguments rather than fetching them from the
pstate or drm_framebuffer.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 98 +++++++++++------------
 1 file changed, 47 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 5aabf9694a53..ee261a591d45 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -128,19 +128,18 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane)
 /**
  * _dpu_plane_calc_bw - calculate bandwidth required for a plane
  * @plane: Pointer to drm plane.
- * @fb:   Pointer to framebuffer associated with the given plane
+ * @fmt: Pointer to source buffer format
  * @pipe_cfg: Pointer to pipe configuration
  * Result: Updates calculated bandwidth in the plane state.
  * BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
  * Prefill BW Equation: line src bytes * line_time
  */
 static void _dpu_plane_calc_bw(struct drm_plane *plane,
-	struct drm_framebuffer *fb,
+	const struct dpu_format *fmt,
 	struct dpu_hw_sspp_cfg *pipe_cfg)
 {
 	struct dpu_plane_state *pstate;
 	struct drm_display_mode *mode;
-	const struct dpu_format *fmt = NULL;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 	int src_width, src_height, dst_height, fps;
 	u64 plane_prefill_bw;
@@ -152,8 +151,6 @@ static void _dpu_plane_calc_bw(struct drm_plane *plane,
 	pstate = to_dpu_plane_state(plane->state);
 	mode = &plane->state->crtc->mode;
 
-	fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier);
-
 	src_width = drm_rect_width(&pipe_cfg->src_rect);
 	src_height = drm_rect_height(&pipe_cfg->src_rect);
 	dst_height = drm_rect_height(&pipe_cfg->dst_rect);
@@ -217,25 +214,25 @@ static void _dpu_plane_calc_clk(struct drm_plane *plane, struct dpu_hw_sspp_cfg
 /**
  * _dpu_plane_calc_fill_level - calculate fill level of the given source format
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  * @fmt:		Pointer to source buffer format
  * @src_width:		width of source buffer
  * Return: fill level corresponding to the source buffer/format or 0 if error
  */
 static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
+		struct dpu_sw_pipe *pipe,
 		const struct dpu_format *fmt, u32 src_width)
 {
 	struct dpu_plane *pdpu;
-	struct dpu_plane_state *pstate;
 	u32 fixed_buff_size;
 	u32 total_fl;
 
-	if (!fmt || !plane->state || !src_width || !fmt->bpp) {
+	if (!fmt || !pipe || !src_width || !fmt->bpp) {
 		DPU_ERROR("invalid arguments\n");
 		return 0;
 	}
 
 	pdpu = to_dpu_plane(plane);
-	pstate = to_dpu_plane_state(plane->state);
 	fixed_buff_size = pdpu->catalog->caps->pixel_ram_size;
 
 	/* FIXME: in multirect case account for the src_width of all the planes */
@@ -251,7 +248,7 @@ static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
 				((src_width + 32) * fmt->bpp);
 		}
 	} else {
-		if (pstate->pipe.multirect_mode == DPU_SSPP_MULTIRECT_PARALLEL) {
+		if (pipe->multirect_mode == DPU_SSPP_MULTIRECT_PARALLEL) {
 			total_fl = (fixed_buff_size / 2) * 2 /
 				((src_width + 32) * fmt->bpp);
 		} else {
@@ -261,7 +258,7 @@ static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
 	}
 
 	DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s w:%u fl:%u\n",
-			pdpu->pipe - SSPP_VIG0,
+			pipe->sspp->idx - SSPP_VIG0,
 			(char *)&fmt->base.pixel_format,
 			src_width, total_fl);
 
@@ -271,25 +268,22 @@ static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
 /**
  * _dpu_plane_set_qos_lut - set QoS LUT of the given plane
  * @plane:		Pointer to drm plane
- * @fb:			Pointer to framebuffer associated with the given plane
+ * @pipe:		Pointer to software pipe
+ * @fmt:		Pointer to source buffer format
  * @pipe_cfg:		Pointer to pipe configuration
  */
 static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
-		struct drm_framebuffer *fb, struct dpu_hw_sspp_cfg *pipe_cfg)
+		struct dpu_sw_pipe *pipe,
+		const struct dpu_format *fmt, struct dpu_hw_sspp_cfg *pipe_cfg)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
-	const struct dpu_format *fmt = NULL;
 	u64 qos_lut;
 	u32 total_fl = 0, lut_usage;
 
 	if (!pdpu->is_rt_pipe) {
 		lut_usage = DPU_QOS_LUT_USAGE_NRT;
 	} else {
-		fmt = dpu_get_dpu_format_ext(
-				fb->format->format,
-				fb->modifier);
-		total_fl = _dpu_plane_calc_fill_level(plane, fmt,
+		total_fl = _dpu_plane_calc_fill_level(plane, pipe, fmt,
 				drm_rect_width(&pipe_cfg->src_rect));
 
 		if (fmt && DPU_FORMAT_IS_LINEAR(fmt))
@@ -301,7 +295,7 @@ static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
 	qos_lut = _dpu_hw_get_qos_lut(
 			&pdpu->catalog->perf->qos_lut_tbl[lut_usage], total_fl);
 
-	trace_dpu_perf_set_qos_luts(pdpu->pipe - SSPP_VIG0,
+	trace_dpu_perf_set_qos_luts(pipe->sspp->idx - SSPP_VIG0,
 			(fmt) ? fmt->base.pixel_format : 0,
 			pdpu->is_rt_pipe, total_fl, qos_lut, lut_usage);
 
@@ -310,20 +304,20 @@ static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
 			fmt ? (char *)&fmt->base.pixel_format : NULL,
 			pdpu->is_rt_pipe, total_fl, qos_lut);
 
-	pstate->pipe.sspp->ops.setup_creq_lut(pstate->pipe.sspp, qos_lut);
+	pipe->sspp->ops.setup_creq_lut(pipe->sspp, qos_lut);
 }
 
 /**
  * _dpu_plane_set_danger_lut - set danger/safe LUT of the given plane
  * @plane:		Pointer to drm plane
- * @fb:			Pointer to framebuffer associated with the given plane
+ * @pipe:		Pointer to software pipe
+ * @fmt:		Pointer to source buffer format
  */
 static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
-		struct drm_framebuffer *fb)
+		struct dpu_sw_pipe *pipe,
+		const struct dpu_format *fmt)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
-	const struct dpu_format *fmt = NULL;
 	u32 danger_lut, safe_lut;
 
 	if (!pdpu->is_rt_pipe) {
@@ -332,10 +326,6 @@ static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
 		safe_lut = pdpu->catalog->perf->safe_lut_tbl
 				[DPU_QOS_LUT_USAGE_NRT];
 	} else {
-		fmt = dpu_get_dpu_format_ext(
-				fb->format->format,
-				fb->modifier);
-
 		if (fmt && DPU_FORMAT_IS_LINEAR(fmt)) {
 			danger_lut = pdpu->catalog->perf->danger_lut_tbl
 					[DPU_QOS_LUT_USAGE_LINEAR];
@@ -362,29 +352,30 @@ static void _dpu_plane_set_danger_lut(struct drm_plane *plane,
 		danger_lut,
 		safe_lut);
 
-	pstate->pipe.sspp->ops.setup_danger_safe_lut(pstate->pipe.sspp,
+	pipe->sspp->ops.setup_danger_safe_lut(pipe->sspp,
 			danger_lut, safe_lut);
 }
 
 /**
  * _dpu_plane_set_qos_ctrl - set QoS control of the given plane
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  * @enable:		true to enable QoS control
  * @flags:		QoS control mode (enum dpu_plane_qos)
  */
 static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
+	struct dpu_sw_pipe *pipe,
 	bool enable, u32 flags)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_hw_pipe_qos_cfg pipe_qos_cfg;
 
 	memset(&pipe_qos_cfg, 0, sizeof(pipe_qos_cfg));
 
 	if (flags & DPU_PLANE_QOS_VBLANK_CTRL) {
-		pipe_qos_cfg.creq_vblank = pstate->pipe.sspp->cap->sblk->creq_vblank;
+		pipe_qos_cfg.creq_vblank = pipe->sspp->cap->sblk->creq_vblank;
 		pipe_qos_cfg.danger_vblank =
-				pstate->pipe.sspp->cap->sblk->danger_vblank;
+				pipe->sspp->cap->sblk->danger_vblank;
 		pipe_qos_cfg.vblank_en = enable;
 	}
 
@@ -410,33 +401,34 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
 		pipe_qos_cfg.danger_vblank,
 		pdpu->is_rt_pipe);
 
-	pstate->pipe.sspp->ops.setup_qos_ctrl(pstate->pipe.sspp,
+	pipe->sspp->ops.setup_qos_ctrl(pipe->sspp,
 			&pipe_qos_cfg);
 }
 
 /**
  * _dpu_plane_set_ot_limit - set OT limit for the given plane
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  * @crtc:		Pointer to drm crtc
  * @pipe_cfg:		Pointer to pipe configuration
  */
 static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
+		struct dpu_sw_pipe *pipe,
 		struct drm_crtc *crtc, struct dpu_hw_sspp_cfg *pipe_cfg)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_vbif_set_ot_params ot_params;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	memset(&ot_params, 0, sizeof(ot_params));
-	ot_params.xin_id = pstate->pipe.sspp->cap->xin_id;
-	ot_params.num = pstate->pipe.sspp->idx - SSPP_NONE;
+	ot_params.xin_id = pipe->sspp->cap->xin_id;
+	ot_params.num = pipe->sspp->idx - SSPP_NONE;
 	ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
 	ot_params.height = drm_rect_height(&pipe_cfg->src_rect);
 	ot_params.is_wfd = !pdpu->is_rt_pipe;
 	ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
 	ot_params.vbif_idx = VBIF_RT;
-	ot_params.clk_ctrl = pstate->pipe.sspp->cap->clk_ctrl;
+	ot_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
 	ot_params.rd = true;
 
 	dpu_vbif_set_ot_limit(dpu_kms, &ot_params);
@@ -445,19 +437,20 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 /**
  * _dpu_plane_set_qos_remap - set vbif QoS for the given plane
  * @plane:		Pointer to drm plane
+ * @pipe:		Pointer to software pipe
  */
-static void _dpu_plane_set_qos_remap(struct drm_plane *plane)
+static void _dpu_plane_set_qos_remap(struct drm_plane *plane,
+		struct dpu_sw_pipe *pipe)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_vbif_set_qos_params qos_params;
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	memset(&qos_params, 0, sizeof(qos_params));
 	qos_params.vbif_idx = VBIF_RT;
-	qos_params.clk_ctrl = pstate->pipe.sspp->cap->clk_ctrl;
-	qos_params.xin_id = pstate->pipe.sspp->cap->xin_id;
-	qos_params.num = pstate->pipe.sspp->idx - SSPP_VIG0;
+	qos_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
+	qos_params.xin_id = pipe->sspp->cap->xin_id;
+	qos_params.num = pipe->sspp->idx - SSPP_VIG0;
 	qos_params.is_rt = pdpu->is_rt_pipe;
 
 	DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d, clk_ctrl:%d\n",
@@ -1144,7 +1137,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 	pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
 	pdpu->is_rt_pipe = is_rt_pipe;
 
-	_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
+	_dpu_plane_set_qos_ctrl(plane, pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
 	DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
 			", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
@@ -1213,20 +1206,20 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 		}
 	}
 
-	_dpu_plane_set_qos_lut(plane, fb, &pipe_cfg);
-	_dpu_plane_set_danger_lut(plane, fb);
+	_dpu_plane_set_qos_lut(plane, pipe, fmt, &pipe_cfg);
+	_dpu_plane_set_danger_lut(plane, pipe, fmt);
 
 	if (plane->type != DRM_PLANE_TYPE_CURSOR) {
-		_dpu_plane_set_qos_ctrl(plane, true, DPU_PLANE_QOS_PANIC_CTRL);
-		_dpu_plane_set_ot_limit(plane, crtc, &pipe_cfg);
+		_dpu_plane_set_qos_ctrl(plane, pipe, true, DPU_PLANE_QOS_PANIC_CTRL);
+		_dpu_plane_set_ot_limit(plane, pipe, crtc, &pipe_cfg);
 	}
 
 	if (pstate->needs_qos_remap) {
 		pstate->needs_qos_remap = false;
-		_dpu_plane_set_qos_remap(plane);
+		_dpu_plane_set_qos_remap(plane, pipe);
 	}
 
-	_dpu_plane_calc_bw(plane, fb, &pipe_cfg);
+	_dpu_plane_calc_bw(plane, fmt, &pipe_cfg);
 
 	_dpu_plane_calc_clk(plane, &pipe_cfg);
 }
@@ -1263,11 +1256,13 @@ static void dpu_plane_atomic_update(struct drm_plane *plane,
 static void dpu_plane_destroy(struct drm_plane *plane)
 {
 	struct dpu_plane *pdpu = plane ? to_dpu_plane(plane) : NULL;
+	struct dpu_plane_state *pstate;
 
 	DPU_DEBUG_PLANE(pdpu, "\n");
 
 	if (pdpu) {
-		_dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
+		pstate = to_dpu_plane_state(plane->state);
+		_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
 		mutex_destroy(&pdpu->lock);
 
@@ -1395,13 +1390,14 @@ static void dpu_plane_reset(struct drm_plane *plane)
 void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 
 	if (!pdpu->is_rt_pipe)
 		return;
 
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
-	_dpu_plane_set_qos_ctrl(plane, enable, DPU_PLANE_QOS_PANIC_CTRL);
+	_dpu_plane_set_qos_ctrl(plane, &pstate->pipe, enable, DPU_PLANE_QOS_PANIC_CTRL);
 	pm_runtime_put_sync(&dpu_kms->pdev->dev);
 }
 #endif
-- 
2.39.1


  parent reply	other threads:[~2023-02-03 18:22 UTC|newest]

Thread overview: 176+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-03 18:21 [PATCH v3 00/27] drm/msm/dpu: wide planes support Dmitry Baryshkov
2023-02-03 18:21 ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 01/27] drm/msm/dpu: rename struct dpu_hw_pipe(_cfg) to dpu_hw_sspp(_cfg) Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 19:31   ` Abhinav Kumar
2023-02-03 19:31     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 02/27] drm/msm/dpu: move SSPP allocation to the RM Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 03/27] drm/msm/dpu: move SSPP debugfs creation to dpu_kms.c Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 04/27] drm/msm/dpu: drop EAGAIN check from dpu_format_populate_layout Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 05/27] drm/msm/dpu: move pipe_hw to dpu_plane_state Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 19:34   ` Abhinav Kumar
2023-02-03 19:34     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 06/27] drm/msm/dpu: drop dpu_plane_pipe function Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 07/27] drm/msm/dpu: introduce struct dpu_sw_pipe Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 08/27] drm/msm/dpu: use dpu_sw_pipe for dpu_hw_sspp callbacks Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 09/27] drm/msm/dpu: pass dpu_format to _dpu_hw_sspp_setup_scaler3() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 19:36   ` Abhinav Kumar
2023-02-03 19:36     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 10/27] drm/msm/dpu: clean up SRC addresses when setting up SSPP for solid fill Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 20:36   ` Abhinav Kumar
2023-02-03 20:36     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 11/27] drm/msm/dpu: move stride programming to dpu_hw_sspp_setup_sourceaddress Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 20:37   ` Abhinav Kumar
2023-02-03 20:37     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 12/27] drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_sspp_cfg Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 13/27] drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 14/27] drm/msm/dpu: don't use unsupported blend stages Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 20:42   ` Abhinav Kumar
2023-02-03 20:42     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 15/27] drm/msm/dpu: move the rest of plane checks to dpu_plane_atomic_check() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 22:44   ` Abhinav Kumar
2023-02-03 22:44     ` Abhinav Kumar
2023-02-03 22:55     ` Dmitry Baryshkov
2023-02-03 22:55       ` Dmitry Baryshkov
2023-02-14 23:25       ` Abhinav Kumar
2023-02-14 23:25         ` Abhinav Kumar
2023-02-15  0:08         ` Dmitry Baryshkov
2023-02-15  0:08           ` Dmitry Baryshkov
2023-03-03 11:43           ` Dmitry Baryshkov
2023-03-03 11:43             ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 16/27] drm/msm/dpu: drop redundant plane dst check from dpu_crtc_atomic_check() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 22:57   ` Abhinav Kumar
2023-02-03 22:57     ` Abhinav Kumar
2023-02-03 18:21 ` Dmitry Baryshkov [this message]
2023-02-03 18:21   ` [PATCH v3 17/27] drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format Dmitry Baryshkov
2023-02-03 23:07   ` Abhinav Kumar
2023-02-03 23:07     ` Abhinav Kumar
2023-02-03 23:20     ` Dmitry Baryshkov
2023-02-03 23:20       ` Dmitry Baryshkov
2023-02-08 23:09       ` Abhinav Kumar
2023-02-08 23:09         ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 18/27] drm/msm/dpu: populate SmartDMA features in hw catalog Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 23:35   ` Abhinav Kumar
2023-02-03 23:35     ` Abhinav Kumar
2023-02-04  2:29     ` Dmitry Baryshkov
2023-02-04  2:29       ` Dmitry Baryshkov
2023-02-04  2:43       ` Abhinav Kumar
2023-02-04  2:43         ` Abhinav Kumar
2023-02-04  4:10         ` Dmitry Baryshkov
2023-02-04  4:10           ` Dmitry Baryshkov
2023-02-04  5:10           ` Abhinav Kumar
2023-02-04  5:10             ` Abhinav Kumar
2023-02-04 10:43             ` Dmitry Baryshkov
2023-02-04 10:43               ` Dmitry Baryshkov
2023-02-04 18:35               ` Abhinav Kumar
2023-02-04 18:35                 ` Abhinav Kumar
2023-02-04 21:08                 ` Dmitry Baryshkov
2023-02-04 21:08                   ` Dmitry Baryshkov
2023-02-04 23:20                   ` Abhinav Kumar
2023-02-04 23:20                     ` Abhinav Kumar
2023-02-05  0:29                     ` Dmitry Baryshkov
2023-02-05  0:29                       ` Dmitry Baryshkov
2023-02-05  0:36                       ` Abhinav Kumar
2023-02-05  0:36                         ` Abhinav Kumar
2023-02-08 23:53                         ` Dmitry Baryshkov
2023-02-08 23:53                           ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 19/27] drm/msm/dpu: make _dpu_plane_calc_clk accept mode directly Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-06 18:48   ` Abhinav Kumar
2023-02-06 18:48     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 20/27] drm/msm/dpu: add dpu_hw_pipe_cfg to dpu_plane_state Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-06 19:07   ` Abhinav Kumar
2023-02-06 19:07     ` Abhinav Kumar
2023-02-16 16:49     ` Dmitry Baryshkov
2023-02-16 16:49       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 21/27] drm/msm/dpu: simplify dpu_plane_validate_src() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-06 22:40   ` Abhinav Kumar
2023-02-06 22:40     ` Abhinav Kumar
2023-02-07  0:27     ` Dmitry Baryshkov
2023-02-07  0:27       ` Dmitry Baryshkov
2023-02-07  0:42       ` Abhinav Kumar
2023-02-07  0:42         ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 22/27] drm/msm/dpu: rework dpu_plane_sspp_atomic_update() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-07  0:22   ` Abhinav Kumar
2023-02-07  0:22     ` Abhinav Kumar
2023-02-09  0:49     ` Dmitry Baryshkov
2023-02-09  0:49       ` Dmitry Baryshkov
2023-02-09  0:51     ` Dmitry Baryshkov
2023-02-09  0:51       ` Dmitry Baryshkov
2023-02-09 11:46     ` Dmitry Baryshkov
2023-02-09 11:46       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 23/27] drm/msm/dpu: rework dpu_plane_atomic_check() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-07 17:49   ` Abhinav Kumar
2023-02-07 17:49     ` Abhinav Kumar
2023-02-07 17:51     ` Dmitry Baryshkov
2023-02-07 17:51       ` Dmitry Baryshkov
2023-02-07 17:57       ` Abhinav Kumar
2023-02-07 17:57         ` Abhinav Kumar
2023-02-07 17:59         ` Dmitry Baryshkov
2023-02-07 17:59           ` Dmitry Baryshkov
2023-02-07 18:08           ` Abhinav Kumar
2023-02-07 18:08             ` Abhinav Kumar
2023-02-07 19:51             ` Dmitry Baryshkov
2023-02-07 19:51               ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 24/27] drm/msm/dpu: rework plane CSC setting Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-07 20:05   ` Abhinav Kumar
2023-02-07 20:05     ` Abhinav Kumar
2023-02-07 20:44     ` Dmitry Baryshkov
2023-02-07 20:44       ` Dmitry Baryshkov
2023-02-07 20:57       ` Abhinav Kumar
2023-02-07 20:57         ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 25/27] drm/msm/dpu: rework static color fill code Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-08 22:34   ` Abhinav Kumar
2023-02-08 22:34     ` Abhinav Kumar
2023-02-09  0:53     ` Dmitry Baryshkov
2023-02-09  0:53       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 26/27] drm/msm/dpu: split pipe handling from _dpu_crtc_blend_setup_mixer Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-08 23:44   ` Abhinav Kumar
2023-02-08 23:44     ` Abhinav Kumar
2023-02-08 23:47     ` Dmitry Baryshkov
2023-02-08 23:47       ` Dmitry Baryshkov
2023-03-03 12:18     ` Dmitry Baryshkov
2023-03-03 12:18       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 27/27] drm/msm/dpu: add support for wide planes Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-09  2:19   ` Abhinav Kumar
2023-02-09  2:19     ` Abhinav Kumar
2023-02-09 11:45     ` Dmitry Baryshkov
2023-02-09 11:45       ` Dmitry Baryshkov
2023-02-09 19:25       ` Abhinav Kumar
2023-02-09 19:25         ` Abhinav Kumar
2023-02-09 21:23         ` Dmitry Baryshkov
2023-02-09 21:23           ` Dmitry Baryshkov
2023-02-09 22:12           ` [Freedreno] " Abhinav Kumar
2023-02-09 22:12             ` Abhinav Kumar
2023-02-10  0:09             ` Dmitry Baryshkov
2023-02-10  0:09               ` Dmitry Baryshkov
2023-02-10  1:12               ` Abhinav Kumar
2023-02-10  1:12                 ` Abhinav Kumar
2023-02-10  2:46                 ` Dmitry Baryshkov
2023-02-10  2:46                   ` Dmitry Baryshkov
2023-02-03 18:24 ` [PATCH v3 00/27] drm/msm/dpu: wide planes support Dmitry Baryshkov
2023-02-03 18:24   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230203182132.1307834-18-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=airlied@gmail.com \
    --cc=andersson@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.