All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Stephen Boyd <swboyd@chromium.org>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Bjorn Andersson <andersson@kernel.org>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH v3 22/27] drm/msm/dpu: rework dpu_plane_sspp_atomic_update()
Date: Fri,  3 Feb 2023 20:21:27 +0200	[thread overview]
Message-ID: <20230203182132.1307834-23-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230203182132.1307834-1-dmitry.baryshkov@linaro.org>

Split pipe-dependent code from dpu_plane_sspp_atomic_update() into the
separate function dpu_plane_sspp_update_pipe(). This is one of
preparational steps to add r_pipe support.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 113 ++++++++++++----------
 1 file changed, 63 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 0986e740b978..f94e132733f3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -404,12 +404,13 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
  * _dpu_plane_set_ot_limit - set OT limit for the given plane
  * @plane:		Pointer to drm plane
  * @pipe:		Pointer to software pipe
- * @crtc:		Pointer to drm crtc
  * @pipe_cfg:		Pointer to pipe configuration
+ * @frame_rate:		CRTC's frame rate
  */
 static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 		struct dpu_sw_pipe *pipe,
-		struct drm_crtc *crtc, struct dpu_hw_sspp_cfg *pipe_cfg)
+		struct dpu_hw_sspp_cfg *pipe_cfg,
+		int frame_rate)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct dpu_vbif_set_ot_params ot_params;
@@ -421,7 +422,7 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 	ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
 	ot_params.height = drm_rect_height(&pipe_cfg->src_rect);
 	ot_params.is_wfd = !pdpu->is_rt_pipe;
-	ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
+	ot_params.frame_rate = frame_rate;
 	ot_params.vbif_idx = VBIF_RT;
 	ot_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
 	ot_params.rd = true;
@@ -457,26 +458,6 @@ static void _dpu_plane_set_qos_remap(struct drm_plane *plane,
 	dpu_vbif_set_qos_remap(dpu_kms, &qos_params);
 }
 
-static void _dpu_plane_set_scanout(struct drm_plane *plane,
-		struct dpu_plane_state *pstate,
-		struct drm_framebuffer *fb)
-{
-	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
-	struct msm_gem_address_space *aspace = kms->base.aspace;
-	struct dpu_hw_fmt_layout layout;
-	int ret;
-
-	ret = dpu_format_populate_layout(aspace, fb, &layout);
-	if (ret)
-		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
-	else if (pstate->pipe.sspp->ops.setup_sourceaddress) {
-		trace_dpu_plane_set_scanout(&pstate->pipe,
-					    &layout);
-		pstate->pipe.sspp->ops.setup_sourceaddress(&pstate->pipe, &layout);
-	}
-}
-
 static void _dpu_plane_setup_scaler3(struct dpu_hw_sspp *pipe_hw,
 		uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
 		struct dpu_hw_scaler3_cfg *scale_cfg,
@@ -1102,35 +1083,25 @@ void dpu_plane_set_error(struct drm_plane *plane, bool error)
 	pdpu->is_error = error;
 }
 
-static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
+static void dpu_plane_sspp_update_pipe(struct drm_plane *plane,
+				       struct dpu_sw_pipe *pipe,
+				       struct dpu_hw_sspp_cfg *pipe_cfg,
+				       const struct dpu_format *fmt,
+				       int frame_rate,
+				       struct dpu_hw_fmt_layout *layout)
 {
 	uint32_t src_flags;
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct drm_plane_state *state = plane->state;
 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
-	struct dpu_sw_pipe *pipe = &pstate->pipe;
-	struct drm_crtc *crtc = state->crtc;
-	struct drm_framebuffer *fb = state->fb;
-	bool is_rt_pipe;
-	const struct dpu_format *fmt =
-		to_dpu_format(msm_framebuffer_format(fb));
-	struct dpu_hw_sspp_cfg *pipe_cfg = &pstate->pipe_cfg;
 
-	_dpu_plane_set_scanout(plane, pstate, fb);
-
-	pstate->pending = true;
-
-	is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
-	pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
-	pdpu->is_rt_pipe = is_rt_pipe;
+	if (layout && pipe->sspp->ops.setup_sourceaddress) {
+		trace_dpu_plane_set_scanout(pipe, layout);
+		pipe->sspp->ops.setup_sourceaddress(pipe, layout);
+	}
 
 	_dpu_plane_set_qos_ctrl(plane, pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
-	DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
-			", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
-			crtc->base.id, DRM_RECT_ARG(&state->dst),
-			(char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
-
 	/* override for color fill */
 	if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
 		/* skip remaining processing on color fill */
@@ -1183,22 +1154,64 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 		}
 	}
 
-	_dpu_plane_set_qos_lut(plane, pipe, fmt, &pstate->pipe_cfg);
+	_dpu_plane_set_qos_lut(plane, pipe, fmt, pipe_cfg);
 	_dpu_plane_set_danger_lut(plane, pipe, fmt);
 
 	if (plane->type != DRM_PLANE_TYPE_CURSOR) {
 		_dpu_plane_set_qos_ctrl(plane, pipe, true, DPU_PLANE_QOS_PANIC_CTRL);
-		_dpu_plane_set_ot_limit(plane, pipe, crtc, &pstate->pipe_cfg);
+		_dpu_plane_set_ot_limit(plane, pipe, pipe_cfg, frame_rate);
 	}
 
-	if (pstate->needs_qos_remap) {
-		pstate->needs_qos_remap = false;
+	if (pstate->needs_qos_remap)
 		_dpu_plane_set_qos_remap(plane, pipe);
-	}
+}
+
+static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
+{
+	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct drm_plane_state *state = plane->state;
+	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+	struct dpu_sw_pipe *pipe = &pstate->pipe;
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_framebuffer *fb = state->fb;
+	bool is_rt_pipe;
+	const struct dpu_format *fmt =
+		to_dpu_format(msm_framebuffer_format(fb));
+	struct dpu_hw_sspp_cfg *pipe_cfg = &pstate->pipe_cfg;
+
+	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
+	struct msm_gem_address_space *aspace = kms->base.aspace;
+	struct dpu_hw_fmt_layout layout;
+	bool layout_valid = false;
+	int ret;
+
+	ret = dpu_format_populate_layout(aspace, fb, &layout);
+	if (ret)
+		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
+	else
+		layout_valid = true;
+
+	pstate->pending = true;
+
+	is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
+	pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
+	pdpu->is_rt_pipe = is_rt_pipe;
+
+	DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
+			", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
+			crtc->base.id, DRM_RECT_ARG(&state->dst),
+			(char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
+
+	dpu_plane_sspp_update_pipe(plane, pipe, pipe_cfg, fmt,
+				   drm_mode_vrefresh(&crtc->mode),
+				   layout_valid ? &layout: NULL);
+
+	if (pstate->needs_qos_remap)
+		pstate->needs_qos_remap = false;
 
-	pstate->plane_fetch_bw = _dpu_plane_calc_bw(pdpu->catalog, fmt, &crtc->mode, &pstate->pipe_cfg);
+	pstate->plane_fetch_bw = _dpu_plane_calc_bw(pdpu->catalog, fmt, &crtc->mode, pipe_cfg);
 
-	pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, &pstate->pipe_cfg);
+	pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, pipe_cfg);
 }
 
 static void _dpu_plane_atomic_disable(struct drm_plane *plane)
-- 
2.39.1


WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: freedreno@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <andersson@kernel.org>,
	dri-devel@lists.freedesktop.org,
	Stephen Boyd <swboyd@chromium.org>
Subject: [PATCH v3 22/27] drm/msm/dpu: rework dpu_plane_sspp_atomic_update()
Date: Fri,  3 Feb 2023 20:21:27 +0200	[thread overview]
Message-ID: <20230203182132.1307834-23-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230203182132.1307834-1-dmitry.baryshkov@linaro.org>

Split pipe-dependent code from dpu_plane_sspp_atomic_update() into the
separate function dpu_plane_sspp_update_pipe(). This is one of
preparational steps to add r_pipe support.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 113 ++++++++++++----------
 1 file changed, 63 insertions(+), 50 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 0986e740b978..f94e132733f3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -404,12 +404,13 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
  * _dpu_plane_set_ot_limit - set OT limit for the given plane
  * @plane:		Pointer to drm plane
  * @pipe:		Pointer to software pipe
- * @crtc:		Pointer to drm crtc
  * @pipe_cfg:		Pointer to pipe configuration
+ * @frame_rate:		CRTC's frame rate
  */
 static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 		struct dpu_sw_pipe *pipe,
-		struct drm_crtc *crtc, struct dpu_hw_sspp_cfg *pipe_cfg)
+		struct dpu_hw_sspp_cfg *pipe_cfg,
+		int frame_rate)
 {
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct dpu_vbif_set_ot_params ot_params;
@@ -421,7 +422,7 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
 	ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
 	ot_params.height = drm_rect_height(&pipe_cfg->src_rect);
 	ot_params.is_wfd = !pdpu->is_rt_pipe;
-	ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
+	ot_params.frame_rate = frame_rate;
 	ot_params.vbif_idx = VBIF_RT;
 	ot_params.clk_ctrl = pipe->sspp->cap->clk_ctrl;
 	ot_params.rd = true;
@@ -457,26 +458,6 @@ static void _dpu_plane_set_qos_remap(struct drm_plane *plane,
 	dpu_vbif_set_qos_remap(dpu_kms, &qos_params);
 }
 
-static void _dpu_plane_set_scanout(struct drm_plane *plane,
-		struct dpu_plane_state *pstate,
-		struct drm_framebuffer *fb)
-{
-	struct dpu_plane *pdpu = to_dpu_plane(plane);
-	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
-	struct msm_gem_address_space *aspace = kms->base.aspace;
-	struct dpu_hw_fmt_layout layout;
-	int ret;
-
-	ret = dpu_format_populate_layout(aspace, fb, &layout);
-	if (ret)
-		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
-	else if (pstate->pipe.sspp->ops.setup_sourceaddress) {
-		trace_dpu_plane_set_scanout(&pstate->pipe,
-					    &layout);
-		pstate->pipe.sspp->ops.setup_sourceaddress(&pstate->pipe, &layout);
-	}
-}
-
 static void _dpu_plane_setup_scaler3(struct dpu_hw_sspp *pipe_hw,
 		uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
 		struct dpu_hw_scaler3_cfg *scale_cfg,
@@ -1102,35 +1083,25 @@ void dpu_plane_set_error(struct drm_plane *plane, bool error)
 	pdpu->is_error = error;
 }
 
-static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
+static void dpu_plane_sspp_update_pipe(struct drm_plane *plane,
+				       struct dpu_sw_pipe *pipe,
+				       struct dpu_hw_sspp_cfg *pipe_cfg,
+				       const struct dpu_format *fmt,
+				       int frame_rate,
+				       struct dpu_hw_fmt_layout *layout)
 {
 	uint32_t src_flags;
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct drm_plane_state *state = plane->state;
 	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
-	struct dpu_sw_pipe *pipe = &pstate->pipe;
-	struct drm_crtc *crtc = state->crtc;
-	struct drm_framebuffer *fb = state->fb;
-	bool is_rt_pipe;
-	const struct dpu_format *fmt =
-		to_dpu_format(msm_framebuffer_format(fb));
-	struct dpu_hw_sspp_cfg *pipe_cfg = &pstate->pipe_cfg;
 
-	_dpu_plane_set_scanout(plane, pstate, fb);
-
-	pstate->pending = true;
-
-	is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
-	pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
-	pdpu->is_rt_pipe = is_rt_pipe;
+	if (layout && pipe->sspp->ops.setup_sourceaddress) {
+		trace_dpu_plane_set_scanout(pipe, layout);
+		pipe->sspp->ops.setup_sourceaddress(pipe, layout);
+	}
 
 	_dpu_plane_set_qos_ctrl(plane, pipe, false, DPU_PLANE_QOS_PANIC_CTRL);
 
-	DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
-			", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
-			crtc->base.id, DRM_RECT_ARG(&state->dst),
-			(char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
-
 	/* override for color fill */
 	if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
 		/* skip remaining processing on color fill */
@@ -1183,22 +1154,64 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 		}
 	}
 
-	_dpu_plane_set_qos_lut(plane, pipe, fmt, &pstate->pipe_cfg);
+	_dpu_plane_set_qos_lut(plane, pipe, fmt, pipe_cfg);
 	_dpu_plane_set_danger_lut(plane, pipe, fmt);
 
 	if (plane->type != DRM_PLANE_TYPE_CURSOR) {
 		_dpu_plane_set_qos_ctrl(plane, pipe, true, DPU_PLANE_QOS_PANIC_CTRL);
-		_dpu_plane_set_ot_limit(plane, pipe, crtc, &pstate->pipe_cfg);
+		_dpu_plane_set_ot_limit(plane, pipe, pipe_cfg, frame_rate);
 	}
 
-	if (pstate->needs_qos_remap) {
-		pstate->needs_qos_remap = false;
+	if (pstate->needs_qos_remap)
 		_dpu_plane_set_qos_remap(plane, pipe);
-	}
+}
+
+static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
+{
+	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct drm_plane_state *state = plane->state;
+	struct dpu_plane_state *pstate = to_dpu_plane_state(state);
+	struct dpu_sw_pipe *pipe = &pstate->pipe;
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_framebuffer *fb = state->fb;
+	bool is_rt_pipe;
+	const struct dpu_format *fmt =
+		to_dpu_format(msm_framebuffer_format(fb));
+	struct dpu_hw_sspp_cfg *pipe_cfg = &pstate->pipe_cfg;
+
+	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
+	struct msm_gem_address_space *aspace = kms->base.aspace;
+	struct dpu_hw_fmt_layout layout;
+	bool layout_valid = false;
+	int ret;
+
+	ret = dpu_format_populate_layout(aspace, fb, &layout);
+	if (ret)
+		DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
+	else
+		layout_valid = true;
+
+	pstate->pending = true;
+
+	is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
+	pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
+	pdpu->is_rt_pipe = is_rt_pipe;
+
+	DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
+			", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
+			crtc->base.id, DRM_RECT_ARG(&state->dst),
+			(char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
+
+	dpu_plane_sspp_update_pipe(plane, pipe, pipe_cfg, fmt,
+				   drm_mode_vrefresh(&crtc->mode),
+				   layout_valid ? &layout: NULL);
+
+	if (pstate->needs_qos_remap)
+		pstate->needs_qos_remap = false;
 
-	pstate->plane_fetch_bw = _dpu_plane_calc_bw(pdpu->catalog, fmt, &crtc->mode, &pstate->pipe_cfg);
+	pstate->plane_fetch_bw = _dpu_plane_calc_bw(pdpu->catalog, fmt, &crtc->mode, pipe_cfg);
 
-	pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, &pstate->pipe_cfg);
+	pstate->plane_clk = _dpu_plane_calc_clk(&crtc->mode, pipe_cfg);
 }
 
 static void _dpu_plane_atomic_disable(struct drm_plane *plane)
-- 
2.39.1


  parent reply	other threads:[~2023-02-03 18:22 UTC|newest]

Thread overview: 176+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-03 18:21 [PATCH v3 00/27] drm/msm/dpu: wide planes support Dmitry Baryshkov
2023-02-03 18:21 ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 01/27] drm/msm/dpu: rename struct dpu_hw_pipe(_cfg) to dpu_hw_sspp(_cfg) Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 19:31   ` Abhinav Kumar
2023-02-03 19:31     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 02/27] drm/msm/dpu: move SSPP allocation to the RM Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 03/27] drm/msm/dpu: move SSPP debugfs creation to dpu_kms.c Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 04/27] drm/msm/dpu: drop EAGAIN check from dpu_format_populate_layout Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 05/27] drm/msm/dpu: move pipe_hw to dpu_plane_state Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 19:34   ` Abhinav Kumar
2023-02-03 19:34     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 06/27] drm/msm/dpu: drop dpu_plane_pipe function Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 07/27] drm/msm/dpu: introduce struct dpu_sw_pipe Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 08/27] drm/msm/dpu: use dpu_sw_pipe for dpu_hw_sspp callbacks Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 09/27] drm/msm/dpu: pass dpu_format to _dpu_hw_sspp_setup_scaler3() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 19:36   ` Abhinav Kumar
2023-02-03 19:36     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 10/27] drm/msm/dpu: clean up SRC addresses when setting up SSPP for solid fill Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 20:36   ` Abhinav Kumar
2023-02-03 20:36     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 11/27] drm/msm/dpu: move stride programming to dpu_hw_sspp_setup_sourceaddress Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 20:37   ` Abhinav Kumar
2023-02-03 20:37     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 12/27] drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_sspp_cfg Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 13/27] drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 14/27] drm/msm/dpu: don't use unsupported blend stages Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 20:42   ` Abhinav Kumar
2023-02-03 20:42     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 15/27] drm/msm/dpu: move the rest of plane checks to dpu_plane_atomic_check() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 22:44   ` Abhinav Kumar
2023-02-03 22:44     ` Abhinav Kumar
2023-02-03 22:55     ` Dmitry Baryshkov
2023-02-03 22:55       ` Dmitry Baryshkov
2023-02-14 23:25       ` Abhinav Kumar
2023-02-14 23:25         ` Abhinav Kumar
2023-02-15  0:08         ` Dmitry Baryshkov
2023-02-15  0:08           ` Dmitry Baryshkov
2023-03-03 11:43           ` Dmitry Baryshkov
2023-03-03 11:43             ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 16/27] drm/msm/dpu: drop redundant plane dst check from dpu_crtc_atomic_check() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 22:57   ` Abhinav Kumar
2023-02-03 22:57     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 17/27] drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 23:07   ` Abhinav Kumar
2023-02-03 23:07     ` Abhinav Kumar
2023-02-03 23:20     ` Dmitry Baryshkov
2023-02-03 23:20       ` Dmitry Baryshkov
2023-02-08 23:09       ` Abhinav Kumar
2023-02-08 23:09         ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 18/27] drm/msm/dpu: populate SmartDMA features in hw catalog Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-03 23:35   ` Abhinav Kumar
2023-02-03 23:35     ` Abhinav Kumar
2023-02-04  2:29     ` Dmitry Baryshkov
2023-02-04  2:29       ` Dmitry Baryshkov
2023-02-04  2:43       ` Abhinav Kumar
2023-02-04  2:43         ` Abhinav Kumar
2023-02-04  4:10         ` Dmitry Baryshkov
2023-02-04  4:10           ` Dmitry Baryshkov
2023-02-04  5:10           ` Abhinav Kumar
2023-02-04  5:10             ` Abhinav Kumar
2023-02-04 10:43             ` Dmitry Baryshkov
2023-02-04 10:43               ` Dmitry Baryshkov
2023-02-04 18:35               ` Abhinav Kumar
2023-02-04 18:35                 ` Abhinav Kumar
2023-02-04 21:08                 ` Dmitry Baryshkov
2023-02-04 21:08                   ` Dmitry Baryshkov
2023-02-04 23:20                   ` Abhinav Kumar
2023-02-04 23:20                     ` Abhinav Kumar
2023-02-05  0:29                     ` Dmitry Baryshkov
2023-02-05  0:29                       ` Dmitry Baryshkov
2023-02-05  0:36                       ` Abhinav Kumar
2023-02-05  0:36                         ` Abhinav Kumar
2023-02-08 23:53                         ` Dmitry Baryshkov
2023-02-08 23:53                           ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 19/27] drm/msm/dpu: make _dpu_plane_calc_clk accept mode directly Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-06 18:48   ` Abhinav Kumar
2023-02-06 18:48     ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 20/27] drm/msm/dpu: add dpu_hw_pipe_cfg to dpu_plane_state Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-06 19:07   ` Abhinav Kumar
2023-02-06 19:07     ` Abhinav Kumar
2023-02-16 16:49     ` Dmitry Baryshkov
2023-02-16 16:49       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 21/27] drm/msm/dpu: simplify dpu_plane_validate_src() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-06 22:40   ` Abhinav Kumar
2023-02-06 22:40     ` Abhinav Kumar
2023-02-07  0:27     ` Dmitry Baryshkov
2023-02-07  0:27       ` Dmitry Baryshkov
2023-02-07  0:42       ` Abhinav Kumar
2023-02-07  0:42         ` Abhinav Kumar
2023-02-03 18:21 ` Dmitry Baryshkov [this message]
2023-02-03 18:21   ` [PATCH v3 22/27] drm/msm/dpu: rework dpu_plane_sspp_atomic_update() Dmitry Baryshkov
2023-02-07  0:22   ` Abhinav Kumar
2023-02-07  0:22     ` Abhinav Kumar
2023-02-09  0:49     ` Dmitry Baryshkov
2023-02-09  0:49       ` Dmitry Baryshkov
2023-02-09  0:51     ` Dmitry Baryshkov
2023-02-09  0:51       ` Dmitry Baryshkov
2023-02-09 11:46     ` Dmitry Baryshkov
2023-02-09 11:46       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 23/27] drm/msm/dpu: rework dpu_plane_atomic_check() Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-07 17:49   ` Abhinav Kumar
2023-02-07 17:49     ` Abhinav Kumar
2023-02-07 17:51     ` Dmitry Baryshkov
2023-02-07 17:51       ` Dmitry Baryshkov
2023-02-07 17:57       ` Abhinav Kumar
2023-02-07 17:57         ` Abhinav Kumar
2023-02-07 17:59         ` Dmitry Baryshkov
2023-02-07 17:59           ` Dmitry Baryshkov
2023-02-07 18:08           ` Abhinav Kumar
2023-02-07 18:08             ` Abhinav Kumar
2023-02-07 19:51             ` Dmitry Baryshkov
2023-02-07 19:51               ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 24/27] drm/msm/dpu: rework plane CSC setting Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-07 20:05   ` Abhinav Kumar
2023-02-07 20:05     ` Abhinav Kumar
2023-02-07 20:44     ` Dmitry Baryshkov
2023-02-07 20:44       ` Dmitry Baryshkov
2023-02-07 20:57       ` Abhinav Kumar
2023-02-07 20:57         ` Abhinav Kumar
2023-02-03 18:21 ` [PATCH v3 25/27] drm/msm/dpu: rework static color fill code Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-08 22:34   ` Abhinav Kumar
2023-02-08 22:34     ` Abhinav Kumar
2023-02-09  0:53     ` Dmitry Baryshkov
2023-02-09  0:53       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 26/27] drm/msm/dpu: split pipe handling from _dpu_crtc_blend_setup_mixer Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-08 23:44   ` Abhinav Kumar
2023-02-08 23:44     ` Abhinav Kumar
2023-02-08 23:47     ` Dmitry Baryshkov
2023-02-08 23:47       ` Dmitry Baryshkov
2023-03-03 12:18     ` Dmitry Baryshkov
2023-03-03 12:18       ` Dmitry Baryshkov
2023-02-03 18:21 ` [PATCH v3 27/27] drm/msm/dpu: add support for wide planes Dmitry Baryshkov
2023-02-03 18:21   ` Dmitry Baryshkov
2023-02-09  2:19   ` Abhinav Kumar
2023-02-09  2:19     ` Abhinav Kumar
2023-02-09 11:45     ` Dmitry Baryshkov
2023-02-09 11:45       ` Dmitry Baryshkov
2023-02-09 19:25       ` Abhinav Kumar
2023-02-09 19:25         ` Abhinav Kumar
2023-02-09 21:23         ` Dmitry Baryshkov
2023-02-09 21:23           ` Dmitry Baryshkov
2023-02-09 22:12           ` [Freedreno] " Abhinav Kumar
2023-02-09 22:12             ` Abhinav Kumar
2023-02-10  0:09             ` Dmitry Baryshkov
2023-02-10  0:09               ` Dmitry Baryshkov
2023-02-10  1:12               ` Abhinav Kumar
2023-02-10  1:12                 ` Abhinav Kumar
2023-02-10  2:46                 ` Dmitry Baryshkov
2023-02-10  2:46                   ` Dmitry Baryshkov
2023-02-03 18:24 ` [PATCH v3 00/27] drm/msm/dpu: wide planes support Dmitry Baryshkov
2023-02-03 18:24   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230203182132.1307834-23-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=airlied@gmail.com \
    --cc=andersson@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.