All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Alex Bennée" <alex.bennee@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, "Alex Bennée" <alex.bennee@linaro.org>,
	"Richard Henderson" <richard.henderson@linaro.org>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL 15/30] gdbstub: specialise target_memory_rw_debug
Date: Tue,  7 Mar 2023 21:21:24 +0000	[thread overview]
Message-ID: <20230307212139.883112-16-alex.bennee@linaro.org> (raw)
In-Reply-To: <20230307212139.883112-1-alex.bennee@linaro.org>

The two implementations are different enough to encourage having a
specialisation and we can move some of the softmmu only stuff out of
gdbstub.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-16-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-16-richard.henderson@linaro.org>

diff --git a/gdbstub/internals.h b/gdbstub/internals.h
index 20caacd744..d8c0292d99 100644
--- a/gdbstub/internals.h
+++ b/gdbstub/internals.h
@@ -185,6 +185,10 @@ void gdb_handle_query_xfer_auxv(GArray *params, void *user_ctx); /*user */
 
 void gdb_handle_query_attached(GArray *params, void *user_ctx); /* both */
 
+/* softmmu only */
+void gdb_handle_query_qemu_phy_mem_mode(GArray *params, void *user_ctx);
+void gdb_handle_set_qemu_phy_mem_mode(GArray *params, void *user_ctx);
+
 /*
  * Break/Watch point support - there is an implementation for softmmu
  * and user mode.
@@ -194,4 +198,19 @@ int gdb_breakpoint_insert(CPUState *cs, int type, vaddr addr, vaddr len);
 int gdb_breakpoint_remove(CPUState *cs, int type, vaddr addr, vaddr len);
 void gdb_breakpoint_remove_all(CPUState *cs);
 
+/**
+ * gdb_target_memory_rw_debug() - handle debug access to memory
+ * @cs: CPUState
+ * @addr: nominal address, could be an entire physical address
+ * @buf: data
+ * @len: length of access
+ * @is_write: is it a write operation
+ *
+ * This function is specialised depending on the mode we are running
+ * in. For softmmu guests we can switch the interpretation of the
+ * address to a physical address.
+ */
+int gdb_target_memory_rw_debug(CPUState *cs, hwaddr addr,
+                               uint8_t *buf, int len, bool is_write);
+
 #endif /* GDBSTUB_INTERNALS_H */
diff --git a/gdbstub/gdbstub.c b/gdbstub/gdbstub.c
index 52d1769f57..ed38ab0aaa 100644
--- a/gdbstub/gdbstub.c
+++ b/gdbstub/gdbstub.c
@@ -46,33 +46,6 @@
 
 #include "internals.h"
 
-#ifndef CONFIG_USER_ONLY
-static int phy_memory_mode;
-#endif
-
-static inline int target_memory_rw_debug(CPUState *cpu, target_ulong addr,
-                                         uint8_t *buf, int len, bool is_write)
-{
-    CPUClass *cc;
-
-#ifndef CONFIG_USER_ONLY
-    if (phy_memory_mode) {
-        if (is_write) {
-            cpu_physical_memory_write(addr, buf, len);
-        } else {
-            cpu_physical_memory_read(addr, buf, len);
-        }
-        return 0;
-    }
-#endif
-
-    cc = CPU_GET_CLASS(cpu);
-    if (cc->memory_rw_debug) {
-        return cc->memory_rw_debug(cpu, addr, buf, len, is_write);
-    }
-    return cpu_memory_rw_debug(cpu, addr, buf, len, is_write);
-}
-
 typedef struct GDBRegisterState {
     int base_reg;
     int num_regs;
@@ -1195,11 +1168,11 @@ static void handle_write_mem(GArray *params, void *user_ctx)
     }
 
     gdb_hextomem(gdbserver_state.mem_buf, get_param(params, 2)->data,
-             get_param(params, 1)->val_ull);
-    if (target_memory_rw_debug(gdbserver_state.g_cpu,
-                               get_param(params, 0)->val_ull,
-                               gdbserver_state.mem_buf->data,
-                               gdbserver_state.mem_buf->len, true)) {
+                 get_param(params, 1)->val_ull);
+    if (gdb_target_memory_rw_debug(gdbserver_state.g_cpu,
+                                   get_param(params, 0)->val_ull,
+                                   gdbserver_state.mem_buf->data,
+                                   gdbserver_state.mem_buf->len, true)) {
         gdb_put_packet("E14");
         return;
     }
@@ -1223,10 +1196,10 @@ static void handle_read_mem(GArray *params, void *user_ctx)
     g_byte_array_set_size(gdbserver_state.mem_buf,
                           get_param(params, 1)->val_ull);
 
-    if (target_memory_rw_debug(gdbserver_state.g_cpu,
-                               get_param(params, 0)->val_ull,
-                               gdbserver_state.mem_buf->data,
-                               gdbserver_state.mem_buf->len, false)) {
+    if (gdb_target_memory_rw_debug(gdbserver_state.g_cpu,
+                                   get_param(params, 0)->val_ull,
+                                   gdbserver_state.mem_buf->data,
+                                   gdbserver_state.mem_buf->len, false)) {
         gdb_put_packet("E14");
         return;
     }
@@ -1676,30 +1649,6 @@ static void handle_query_qemu_supported(GArray *params, void *user_ctx)
     gdb_put_strbuf();
 }
 
-#ifndef CONFIG_USER_ONLY
-static void handle_query_qemu_phy_mem_mode(GArray *params,
-                                           void *user_ctx)
-{
-    g_string_printf(gdbserver_state.str_buf, "%d", phy_memory_mode);
-    gdb_put_strbuf();
-}
-
-static void handle_set_qemu_phy_mem_mode(GArray *params, void *user_ctx)
-{
-    if (!params->len) {
-        gdb_put_packet("E22");
-        return;
-    }
-
-    if (!get_param(params, 0)->val_ul) {
-        phy_memory_mode = 0;
-    } else {
-        phy_memory_mode = 1;
-    }
-    gdb_put_packet("OK");
-}
-#endif
-
 static const GdbCmdParseEntry gdb_gen_query_set_common_table[] = {
     /* Order is important if has same prefix */
     {
@@ -1790,7 +1739,7 @@ static const GdbCmdParseEntry gdb_gen_query_table[] = {
     },
 #ifndef CONFIG_USER_ONLY
     {
-        .handler = handle_query_qemu_phy_mem_mode,
+        .handler = gdb_handle_query_qemu_phy_mem_mode,
         .cmd = "qemu.PhyMemMode",
     },
 #endif
@@ -1806,7 +1755,7 @@ static const GdbCmdParseEntry gdb_gen_set_table[] = {
     },
 #ifndef CONFIG_USER_ONLY
     {
-        .handler = handle_set_qemu_phy_mem_mode,
+        .handler = gdb_handle_set_qemu_phy_mem_mode,
         .cmd = "qemu.PhyMemMode:",
         .cmd_startswith = 1,
         .schema = "l0"
diff --git a/gdbstub/softmmu.c b/gdbstub/softmmu.c
index 7c180b779a..ab2d182654 100644
--- a/gdbstub/softmmu.c
+++ b/gdbstub/softmmu.c
@@ -413,9 +413,60 @@ void gdb_exit(int code)
     qemu_chr_fe_deinit(&gdbserver_system_state.chr, true);
 }
 
+/*
+ * Memory access
+ */
+static int phy_memory_mode;
+
+int gdb_target_memory_rw_debug(CPUState *cpu, hwaddr addr,
+                               uint8_t *buf, int len, bool is_write)
+{
+    CPUClass *cc;
+
+    if (phy_memory_mode) {
+        if (is_write) {
+            cpu_physical_memory_write(addr, buf, len);
+        } else {
+            cpu_physical_memory_read(addr, buf, len);
+        }
+        return 0;
+    }
+
+    cc = CPU_GET_CLASS(cpu);
+    if (cc->memory_rw_debug) {
+        return cc->memory_rw_debug(cpu, addr, buf, len, is_write);
+    }
+
+    return cpu_memory_rw_debug(cpu, addr, buf, len, is_write);
+}
+
+
 /*
  * Softmmu specific command helpers
  */
+
+void gdb_handle_query_qemu_phy_mem_mode(GArray *params,
+                                        void *user_ctx)
+{
+    g_string_printf(gdbserver_state.str_buf, "%d", phy_memory_mode);
+    gdb_put_strbuf();
+}
+
+void gdb_handle_set_qemu_phy_mem_mode(GArray *params, void *user_ctx)
+{
+    if (!params->len) {
+        gdb_put_packet("E22");
+        return;
+    }
+
+    if (!get_param(params, 0)->val_ul) {
+        phy_memory_mode = 0;
+    } else {
+        phy_memory_mode = 1;
+    }
+    gdb_put_packet("OK");
+}
+
 void gdb_handle_query_rcmd(GArray *params, void *user_ctx)
 {
     const guint8 zero = 0;
diff --git a/gdbstub/user.c b/gdbstub/user.c
index c0fd83b373..92663d971c 100644
--- a/gdbstub/user.c
+++ b/gdbstub/user.c
@@ -378,6 +378,21 @@ int gdb_continue_partial(char *newstates)
     return res;
 }
 
+/*
+ * Memory access helpers
+ */
+int gdb_target_memory_rw_debug(CPUState *cpu, hwaddr addr,
+                               uint8_t *buf, int len, bool is_write)
+{
+    CPUClass *cc;
+
+    cc = CPU_GET_CLASS(cpu);
+    if (cc->memory_rw_debug) {
+        return cc->memory_rw_debug(cpu, addr, buf, len, is_write);
+    }
+    return cpu_memory_rw_debug(cpu, addr, buf, len, is_write);
+}
+
 /*
  * Break/Watch point helpers
  */
-- 
2.39.2



  parent reply	other threads:[~2023-03-07 21:31 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-07 21:21 [PULL 00/30] gdbstub refactor for smaller build Alex Bennée
2023-03-07 21:21 ` [PULL 01/30] gdbstub/internals.h: clean up include guard Alex Bennée
2023-03-07 21:21 ` [PULL 02/30] gdbstub: fix-up copyright and license files Alex Bennée
2023-03-07 21:21 ` [PULL 03/30] gdbstub: Make syscall_complete/[gs]et_reg target-agnostic typedefs Alex Bennée
2023-03-07 21:21 ` [PULL 04/30] gdbstub: clean-up indent on gdb_exit Alex Bennée
2023-03-07 21:21 ` [PULL 05/30] gdbstub: define separate user/system structures Alex Bennée
2023-03-07 21:21 ` [PULL 06/30] gdbstub: move GDBState to shared internals header Alex Bennée
2023-03-07 21:21 ` [PULL 07/30] includes: move tb_flush into its own header Alex Bennée
2023-03-07 21:21 ` [PULL 08/30] gdbstub: move fromhex/tohex routines to internals Alex Bennée
2023-03-07 21:21 ` [PULL 09/30] gdbstub: make various helpers visible to the rest of the module Alex Bennée
2023-03-07 21:21 ` [PULL 10/30] gdbstub: move chunk of softmmu functionality to own file Alex Bennée
2023-03-07 21:21 ` [PULL 11/30] gdbstub: move chunks of user code into own files Alex Bennée
2023-03-07 21:21 ` [PULL 12/30] gdbstub: rationalise signal mapping in softmmu Alex Bennée
2023-03-07 21:21 ` [PULL 13/30] gdbstub: abstract target specific details from gdb_put_packet_binary Alex Bennée
2023-03-07 21:21 ` [PULL 14/30] gdbstub: specialise handle_query_attached Alex Bennée
2023-03-07 21:21 ` Alex Bennée [this message]
2023-03-07 21:21 ` [PULL 16/30] gdbstub: introduce gdb_get_max_cpus Alex Bennée
2023-03-07 21:21 ` [PULL 17/30] gdbstub: specialise stub_can_reverse Alex Bennée
2023-03-07 21:21 ` [PULL 18/30] gdbstub: fix address type of gdb_set_cpu_pc Alex Bennée
2023-03-07 21:21 ` [PULL 19/30] gdbstub: don't use target_ulong while handling registers Alex Bennée
2023-03-07 21:21 ` [PULL 20/30] gdbstub: move register helpers into standalone include Alex Bennée
2023-03-07 21:21 ` [PULL 21/30] gdbstub: move syscall handling to new file Alex Bennée
2023-03-07 21:21 ` [PULL 22/30] gdbstub: only compile gdbstub twice for whole build Alex Bennée
2023-03-23 10:05   ` Philippe Mathieu-Daudé
2023-03-29 16:04     ` Philippe Mathieu-Daudé
2023-03-07 21:21 ` [PULL 23/30] testing: probe gdb for supported architectures ahead of time Alex Bennée
2023-03-07 21:21 ` [PULL 24/30] include: split target_long definition from cpu-defs Alex Bennée
2023-03-07 21:21 ` [PULL 25/30] gdbstub: split out softmmu/user specifics for syscall handling Alex Bennée
2023-03-07 21:21 ` [PULL 26/30] gdbstub: Remove gdb_do_syscallv Alex Bennée
2023-03-07 21:21 ` [PULL 27/30] gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t Alex Bennée
2023-03-07 21:21 ` [PULL 28/30] stubs: split semihosting_get_target from system only stubs Alex Bennée
2023-03-07 21:21 ` [PULL 29/30] gdbstub: Build syscall.c once Alex Bennée
2023-03-07 21:21 ` [PULL 30/30] gdbstub: move update guest debug to accel ops Alex Bennée
2023-03-09 21:50 ` [PULL 00/30] gdbstub refactor for smaller build Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230307212139.883112-16-alex.bennee@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.