All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Liam R. Howlett" <Liam.Howlett@Oracle.com>
To: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	David Hildenbrand <david@redhat.com>,
	Matthew Wilcox <willy@infradead.org>,
	Vlastimil Babka <vbabka@suse.cz>,
	maple-tree@lists.infradead.org, Vernon Yang <vernon2gm@gmail.com>
Subject: Re: [PATCH v2 4/4] mm/mmap/vma_merge: init cleanup, be explicit about the non-mergeable case
Date: Tue, 21 Mar 2023 22:08:58 -0400	[thread overview]
Message-ID: <20230322020858.msvpvit63sb437ze@revolver> (raw)
In-Reply-To: <f5e27d1bb9259b7ef7a45099a838e47fbaaad3ab.1679431180.git.lstoakes@gmail.com>

* Lorenzo Stoakes <lstoakes@gmail.com> [230321 16:46]:
> Reorder the initial variables sensibly and set vma_start and vm_pgoff there
								^vma_pgoff
	Indicating it is used for the vm_area_struct *vma

> rather than later so all initial values are set at the same time meaning we
> don't have to set these later.

I did these later to reduce the number of times we were checking prev.
With this patch, we check prev 3 times, but before we were checking it
once.  The compiler might do something clever here to reduce the
checking?

I'm also not sure adding the conditional operator in the init helps your
goal of cleaning it up.

> 
> Rather than setting err = -1 and only resetting if we hit merge cases,
> explicitly check the non-mergeable case to make it abundantly clear that we
> only proceed with the rest if something is mergeable, default err to 0 and
> only update if an error might occur.
> 
> Move the merge_prev, merge_next cases closer to the logic determining curr,
> next.
> 
> This has no functional impact.
> 
> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
> ---
>  mm/mmap.c | 55 ++++++++++++++++++++++++++-----------------------------
>  1 file changed, 26 insertions(+), 29 deletions(-)
> 
> diff --git a/mm/mmap.c b/mm/mmap.c
> index 7aec49c3bc74..d60cb0b7ae15 100644
> --- a/mm/mmap.c
> +++ b/mm/mmap.c
> @@ -909,18 +909,18 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
>  			struct vm_userfaultfd_ctx vm_userfaultfd_ctx,
>  			struct anon_vma_name *anon_name)
>  {
> -	pgoff_t pglen = (end - addr) >> PAGE_SHIFT;
> -	pgoff_t vma_pgoff;
>  	struct vm_area_struct *curr, *next, *res;
>  	struct vm_area_struct *vma, *adjust, *remove, *remove2;
> -	int err = -1;
> +	struct vma_prepare vp;
> +	int err = 0;
>  	bool merge_prev = false;
>  	bool merge_next = false;
>  	bool vma_expanded = false;
> -	struct vma_prepare vp;
> +	unsigned long vma_start = prev ? prev->vm_start : addr;
>  	unsigned long vma_end = end;
> +	pgoff_t vma_pgoff = prev ? prev->vm_pgoff : 0;
> +	pgoff_t pglen = (end - addr) >> PAGE_SHIFT;
>  	long adj_start = 0;
> -	unsigned long vma_start = addr;
>  
>  	validate_mm(mm);
>  	/*
> @@ -940,6 +940,23 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
>  		/* Is there a VMA next to a hole (case 1 - 3) or prev (4)? */
>  		next = vma_lookup(mm, end);
>  
> +	/* Can we merge the predecessor? */
> +	if (prev && addr == prev->vm_end && mpol_equal(vma_policy(prev), policy)
> +	    && can_vma_merge_after(prev, vm_flags, anon_vma, file,
> +				   pgoff, vm_userfaultfd_ctx, anon_name)) {
> +		merge_prev = true;
> +		vma_prev(vmi);
> +	}
> +
> +	/* Can we merge the successor? */
> +	merge_next = next && mpol_equal(policy, vma_policy(next)) &&
> +		can_vma_merge_before(next, vm_flags,
> +				     anon_vma, file, pgoff+pglen,
> +				     vm_userfaultfd_ctx, anon_name);
> +
> +	if (!merge_prev && !merge_next)
> +		return NULL; /* Not mergeable. */
> +
>  	/*
>  	 * By default, we return prev. Cases 3, 4, 8 will instead return next
>  	 * and cases 3, 8 will also update vma to point at next.
> @@ -951,26 +968,6 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
>  	VM_WARN_ON(curr && (addr != curr->vm_start || end > curr->vm_end));
>  	VM_WARN_ON(addr >= end);
>  
> -	if (prev) {
> -		vma_start = prev->vm_start;
> -		vma_pgoff = prev->vm_pgoff;
> -		/* Can we merge the predecessor? */
> -		if (prev->vm_end == addr && mpol_equal(vma_policy(prev), policy)
> -		    && can_vma_merge_after(prev, vm_flags, anon_vma, file,
> -				   pgoff, vm_userfaultfd_ctx, anon_name)) {
> -			merge_prev = true;
> -			vma_prev(vmi);
> -		}
> -	}
> -
> -	/* Can we merge the successor? */
> -	if (next && mpol_equal(policy, vma_policy(next)) &&
> -	    can_vma_merge_before(next, vm_flags,
> -				 anon_vma, file, pgoff+pglen,
> -				 vm_userfaultfd_ctx, anon_name)) {
> -		merge_next = true;
> -	}
> -
>  	remove = remove2 = adjust = NULL;
>  	/* Can we merge both the predecessor and the successor? */
>  	if (merge_prev && merge_next &&
> @@ -985,7 +982,7 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
>  				err = dup_anon_vma(prev, curr);
>  		}
>  	} else if (merge_prev) {
> -		err = 0;				/* case 2 */
> +							/* case 2 */
>  		if (curr) {
>  			err = dup_anon_vma(prev, curr);
>  			if (end == curr->vm_end) {	/* case 7 */
> @@ -995,7 +992,7 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
>  				adj_start = (end - curr->vm_start);
>  			}
>  		}
> -	} else if (merge_next) {
> +	} else { /* merge_next */
>  		res = next;
>  		if (prev && addr < prev->vm_end) {	/* case 4 */
>  			vma_end = addr;
> @@ -1011,7 +1008,7 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
>  			vma_start = addr;
>  			vma_end = next->vm_end;
>  			vma_pgoff = next->vm_pgoff;
> -			err = 0;
> +

Was this blank line intentional?  I assume so, to give a gap for the
comment below?  It's probably worth having.

>  			if (curr) {			/* case 8 */
>  				vma_pgoff = curr->vm_pgoff;
>  				remove = curr;
> @@ -1020,7 +1017,7 @@ struct vm_area_struct *vma_merge(struct vma_iterator *vmi, struct mm_struct *mm,
>  		}
>  	}
>  
> -	/* Cannot merge or error in anon_vma clone */
> +	/* Error in anon_vma clone. */
>  	if (err)
>  		return NULL;
>  
> -- 
> 2.39.2
> 
> 

  reply	other threads:[~2023-03-22  2:09 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-21 20:45 [PATCH v2 0/4] further cleanup of vma_merge() Lorenzo Stoakes
2023-03-21 20:45 ` [PATCH v2 1/4] mm/mmap/vma_merge: further improve prev/next VMA naming Lorenzo Stoakes
2023-03-21 20:45 ` [PATCH v2 2/4] mm/mmap/vma_merge: set next to NULL if not applicable Lorenzo Stoakes
2023-03-22  1:42   ` Liam R. Howlett
2023-03-22  6:23     ` Lorenzo Stoakes
2023-03-21 20:45 ` [PATCH v2 3/4] mm/mmap/vma_merge: extend invariants, avoid invalid res, vma Lorenzo Stoakes
2023-03-22  9:16   ` Vlastimil Babka
     [not found]   ` <CGME20230323170046eucas1p2483ab0fcc3d6bc56d4b6d09143bbadda@eucas1p2.samsung.com>
2023-03-23 17:00     ` Marek Szyprowski
2023-03-23 17:08       ` Lorenzo Stoakes
2023-03-23 17:10         ` Lorenzo Stoakes
2023-03-21 20:45 ` [PATCH v2 4/4] mm/mmap/vma_merge: init cleanup, be explicit about the non-mergeable case Lorenzo Stoakes
2023-03-22  2:08   ` Liam R. Howlett [this message]
2023-03-22  6:07     ` Lorenzo Stoakes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230322020858.msvpvit63sb437ze@revolver \
    --to=liam.howlett@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=david@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lstoakes@gmail.com \
    --cc=maple-tree@lists.infradead.org \
    --cc=vbabka@suse.cz \
    --cc=vernon2gm@gmail.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.