From: Thomas Huth <thuth@redhat.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: Yeqi Fu <fufuyqqqqqq@gmail.com>
Subject: [PULL 1/8] hw/ide: replace TABs with space
Date: Fri, 24 Mar 2023 16:36:03 +0100 [thread overview]
Message-ID: <20230324153610.224673-2-thuth@redhat.com> (raw)
In-Reply-To: <20230324153610.224673-1-thuth@redhat.com>
From: Yeqi Fu <fufuyqqqqqq@gmail.com>
Bring the block files in line with the QEMU coding style, with spaces
for indentation. This patch partially resolves the issue 371.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315043229.62100-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
include/hw/ide/internal.h | 248 +++++++++++++-------------
hw/ide/cmd646.c | 28 +--
hw/ide/core.c | 84 ++++-----
hw/ide/microdrive.c | 360 +++++++++++++++++++-------------------
4 files changed, 360 insertions(+), 360 deletions(-)
diff --git a/include/hw/ide/internal.h b/include/hw/ide/internal.h
index d9f1f77dd5..2bfa7533d6 100644
--- a/include/hw/ide/internal.h
+++ b/include/hw/ide/internal.h
@@ -38,32 +38,32 @@ OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
/* Bits of HD_STATUS */
-#define ERR_STAT 0x01
-#define INDEX_STAT 0x02
-#define ECC_STAT 0x04 /* Corrected error */
-#define DRQ_STAT 0x08
-#define SEEK_STAT 0x10
-#define SRV_STAT 0x10
-#define WRERR_STAT 0x20
-#define READY_STAT 0x40
-#define BUSY_STAT 0x80
+#define ERR_STAT 0x01
+#define INDEX_STAT 0x02
+#define ECC_STAT 0x04 /* Corrected error */
+#define DRQ_STAT 0x08
+#define SEEK_STAT 0x10
+#define SRV_STAT 0x10
+#define WRERR_STAT 0x20
+#define READY_STAT 0x40
+#define BUSY_STAT 0x80
/* Bits for HD_ERROR */
-#define MARK_ERR 0x01 /* Bad address mark */
-#define TRK0_ERR 0x02 /* couldn't find track 0 */
-#define ABRT_ERR 0x04 /* Command aborted */
-#define MCR_ERR 0x08 /* media change request */
-#define ID_ERR 0x10 /* ID field not found */
-#define MC_ERR 0x20 /* media changed */
-#define ECC_ERR 0x40 /* Uncorrectable ECC error */
-#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
-#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
+#define MARK_ERR 0x01 /* Bad address mark */
+#define TRK0_ERR 0x02 /* couldn't find track 0 */
+#define ABRT_ERR 0x04 /* Command aborted */
+#define MCR_ERR 0x08 /* media change request */
+#define ID_ERR 0x10 /* ID field not found */
+#define MC_ERR 0x20 /* media changed */
+#define ECC_ERR 0x40 /* Uncorrectable ECC error */
+#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
+#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
/* Bits of HD_NSECTOR */
-#define CD 0x01
-#define IO 0x02
-#define REL 0x04
-#define TAG_MASK 0xf8
+#define CD 0x01
+#define IO 0x02
+#define REL 0x04
+#define TAG_MASK 0xf8
/* Bits of Device Control register */
#define IDE_CTRL_HOB 0x80
@@ -71,50 +71,50 @@ OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
#define IDE_CTRL_DISABLE_IRQ 0x02
/* ACS-2 T13/2015-D Table B.2 Command codes */
-#define WIN_NOP 0x00
+#define WIN_NOP 0x00
/* reserved 0x01..0x02 */
-#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
+#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
/* reserved 0x04..0x05 */
#define WIN_DSM 0x06
/* reserved 0x07 */
-#define WIN_DEVICE_RESET 0x08
+#define WIN_DEVICE_RESET 0x08
/* reserved 0x09..0x0a */
/* REQUEST SENSE DATA EXT 0x0B */
/* reserved 0x0C..0x0F */
#define WIN_RECAL 0x10 /* obsolete since ATA4 */
/* obsolete since ATA3, retired in ATA4 0x11..0x1F */
-#define WIN_READ 0x20 /* 28-Bit */
+#define WIN_READ 0x20 /* 28-Bit */
#define WIN_READ_ONCE 0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
/* obsolete since ATA4 0x22..0x23 */
-#define WIN_READ_EXT 0x24 /* 48-Bit */
-#define WIN_READDMA_EXT 0x25 /* 48-Bit */
+#define WIN_READ_EXT 0x24 /* 48-Bit */
+#define WIN_READDMA_EXT 0x25 /* 48-Bit */
#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit, obsolete since ACS2 */
-#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
/* reserved 0x28 */
-#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
+#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
/* READ STREAM DMA EXT 0x2A */
/* READ STREAM EXT 0x2B */
/* reserved 0x2C..0x2E */
/* READ LOG EXT 0x2F */
-#define WIN_WRITE 0x30 /* 28-Bit */
+#define WIN_WRITE 0x30 /* 28-Bit */
#define WIN_WRITE_ONCE 0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
/* obsolete since ATA4 0x32..0x33 */
-#define WIN_WRITE_EXT 0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
+#define WIN_WRITE_EXT 0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
#define WIN_SET_MAX_EXT 0x37 /* 48-Bit, obsolete since ACS2 */
-#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
+#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
/* WRITE STREAM DMA EXT 0x3A */
/* WRITE STREAM EXT 0x3B */
#define WIN_WRITE_VERIFY 0x3C /* 28-Bit, obsolete since ATA4 */
/* WRITE DMA FUA EXT 0x3D */
/* obsolete since ACS2 0x3E */
/* WRITE LOG EXT 0x3F */
-#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
+#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
/* reserved 0x43..0x44 */
/* WRITE UNCORRECTABLE EXT 0x45 */
/* reserved 0x46 */
@@ -136,11 +136,11 @@ OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
#define WIN_SEEK 0x70 /* obsolete since ATA7 */
/* reserved 0x71-0x7F */
/* vendor specific 0x80-0x86 */
-#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
+#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
/* vendor specific 0x88-0x8F */
-#define WIN_DIAGNOSE 0x90
+#define WIN_DIAGNOSE 0x90
#define WIN_SPECIFY 0x91 /* set drive geometry translation, obsolete since ATA6 */
-#define WIN_DOWNLOAD_MICROCODE 0x92
+#define WIN_DOWNLOAD_MICROCODE 0x92
/* DOWNLOAD MICROCODE DMA 0x93 */
#define WIN_STANDBYNOW2 0x94 /* retired in ATA4 */
#define WIN_IDLEIMMEDIATE2 0x95 /* force drive to become "ready", retired in ATA4 */
@@ -150,31 +150,31 @@ OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
#define WIN_SLEEPNOW2 0x99 /* retired in ATA4 */
/* vendor specific 0x9A */
/* reserved 0x9B..0x9F */
-#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
+#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
#define WIN_QUEUED_SERVICE 0xA2 /* obsolete since ACS2 */
/* reserved 0xA3..0xAF */
-#define WIN_SMART 0xB0 /* self-monitoring and reporting */
+#define WIN_SMART 0xB0 /* self-monitoring and reporting */
/* Device Configuration Overlay 0xB1 */
/* reserved 0xB2..0xB3 */
/* Sanitize Device 0xB4 */
/* reserved 0xB5 */
/* NV Cache 0xB6 */
/* reserved for CFA 0xB7..0xBB */
-#define CFA_ACCESS_METADATA_STORAGE 0xB8
+#define CFA_ACCESS_METADATA_STORAGE 0xB8
/* reserved 0xBC..0xBF */
-#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
+#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
/* vendor specific 0xC1..0xC3 */
-#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
+#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
-#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
-#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
-#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
+#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
+#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
/* WRITE MULTIPLE FUA EXT 0xCE */
/* reserved 0xCF..0xDO */
/* CHECK MEDIA CARD TYPE 0xD1 */
@@ -184,33 +184,33 @@ OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
#define WIN_DOORLOCK 0xDE /* lock door on removable drives, obsolete since ATA8 */
#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives, obsolete since ATA8 */
-#define WIN_STANDBYNOW1 0xE0
-#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1 0xE3
-#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1 0xE5
-#define WIN_SLEEPNOW1 0xE6
-#define WIN_FLUSH_CACHE 0xE7
-#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
+#define WIN_STANDBYNOW1 0xE0
+#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1 0xE3
+#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1 0xE5
+#define WIN_SLEEPNOW1 0xE6
+#define WIN_FLUSH_CACHE 0xE7
+#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
/* READ BUFFER DMA 0xE9 */
-#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
+#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
/* WRITE BUFFER DMA 0xEB */
-#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
+#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
#define WIN_MEDIAEJECT 0xED /* obsolete since ATA8 */
/* obsolete since ATA4 0xEE */
-#define WIN_SETFEATURES 0xEF /* set special drive features */
+#define WIN_SETFEATURES 0xEF /* set special drive features */
#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature, vendor specific */
-#define WIN_SECURITY_SET_PASS 0xF1
-#define WIN_SECURITY_UNLOCK 0xF2
-#define WIN_SECURITY_ERASE_PREPARE 0xF3
-#define WIN_SECURITY_ERASE_UNIT 0xF4
-#define WIN_SECURITY_FREEZE_LOCK 0xF5
+#define WIN_SECURITY_SET_PASS 0xF1
+#define WIN_SECURITY_UNLOCK 0xF2
+#define WIN_SECURITY_ERASE_PREPARE 0xF3
+#define WIN_SECURITY_ERASE_UNIT 0xF4
+#define WIN_SECURITY_FREEZE_LOCK 0xF5
#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP; not specified in T13! */
-#define WIN_SECURITY_DISABLE 0xF6
+#define WIN_SECURITY_DISABLE 0xF6
/* vendor specific 0xF7 */
-#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
-#define WIN_SET_MAX 0xF9
+#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
+#define WIN_SET_MAX 0xF9
/* vendor specific 0xFA..0xFF */
/* set to 1 set disable mult support */
@@ -231,68 +231,68 @@ OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
/* The generic packet command opcodes for CD/DVD Logical Units,
* From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK 0xa1
-#define GPCMD_CLOSE_TRACK 0x5b
-#define GPCMD_FLUSH_CACHE 0x35
-#define GPCMD_FORMAT_UNIT 0x04
-#define GPCMD_GET_CONFIGURATION 0x46
+#define GPCMD_BLANK 0xa1
+#define GPCMD_CLOSE_TRACK 0x5b
+#define GPCMD_FLUSH_CACHE 0x35
+#define GPCMD_FORMAT_UNIT 0x04
+#define GPCMD_GET_CONFIGURATION 0x46
#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE 0xac
-#define GPCMD_INQUIRY 0x12
-#define GPCMD_LOAD_UNLOAD 0xa6
-#define GPCMD_MECHANISM_STATUS 0xbd
-#define GPCMD_MODE_SELECT_10 0x55
-#define GPCMD_MODE_SENSE_10 0x5a
-#define GPCMD_PAUSE_RESUME 0x4b
-#define GPCMD_PLAY_AUDIO_10 0x45
-#define GPCMD_PLAY_AUDIO_MSF 0x47
-#define GPCMD_PLAY_AUDIO_TI 0x48
-#define GPCMD_PLAY_CD 0xbc
+#define GPCMD_GET_PERFORMANCE 0xac
+#define GPCMD_INQUIRY 0x12
+#define GPCMD_LOAD_UNLOAD 0xa6
+#define GPCMD_MECHANISM_STATUS 0xbd
+#define GPCMD_MODE_SELECT_10 0x55
+#define GPCMD_MODE_SENSE_10 0x5a
+#define GPCMD_PAUSE_RESUME 0x4b
+#define GPCMD_PLAY_AUDIO_10 0x45
+#define GPCMD_PLAY_AUDIO_MSF 0x47
+#define GPCMD_PLAY_AUDIO_TI 0x48
+#define GPCMD_PLAY_CD 0xbc
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
-#define GPCMD_READ_10 0x28
-#define GPCMD_READ_12 0xa8
-#define GPCMD_READ_CDVD_CAPACITY 0x25
-#define GPCMD_READ_CD 0xbe
-#define GPCMD_READ_CD_MSF 0xb9
-#define GPCMD_READ_DISC_INFO 0x51
-#define GPCMD_READ_DVD_STRUCTURE 0xad
-#define GPCMD_READ_FORMAT_CAPACITIES 0x23
-#define GPCMD_READ_HEADER 0x44
-#define GPCMD_READ_TRACK_RZONE_INFO 0x52
-#define GPCMD_READ_SUBCHANNEL 0x42
-#define GPCMD_READ_TOC_PMA_ATIP 0x43
-#define GPCMD_REPAIR_RZONE_TRACK 0x58
-#define GPCMD_REPORT_KEY 0xa4
-#define GPCMD_REQUEST_SENSE 0x03
-#define GPCMD_RESERVE_RZONE_TRACK 0x53
-#define GPCMD_SCAN 0xba
-#define GPCMD_SEEK 0x2b
-#define GPCMD_SEND_DVD_STRUCTURE 0xad
-#define GPCMD_SEND_EVENT 0xa2
-#define GPCMD_SEND_KEY 0xa3
-#define GPCMD_SEND_OPC 0x54
-#define GPCMD_SET_READ_AHEAD 0xa7
-#define GPCMD_SET_STREAMING 0xb6
-#define GPCMD_START_STOP_UNIT 0x1b
-#define GPCMD_STOP_PLAY_SCAN 0x4e
-#define GPCMD_TEST_UNIT_READY 0x00
-#define GPCMD_VERIFY_10 0x2f
-#define GPCMD_WRITE_10 0x2a
-#define GPCMD_WRITE_AND_VERIFY_10 0x2e
+#define GPCMD_READ_10 0x28
+#define GPCMD_READ_12 0xa8
+#define GPCMD_READ_CDVD_CAPACITY 0x25
+#define GPCMD_READ_CD 0xbe
+#define GPCMD_READ_CD_MSF 0xb9
+#define GPCMD_READ_DISC_INFO 0x51
+#define GPCMD_READ_DVD_STRUCTURE 0xad
+#define GPCMD_READ_FORMAT_CAPACITIES 0x23
+#define GPCMD_READ_HEADER 0x44
+#define GPCMD_READ_TRACK_RZONE_INFO 0x52
+#define GPCMD_READ_SUBCHANNEL 0x42
+#define GPCMD_READ_TOC_PMA_ATIP 0x43
+#define GPCMD_REPAIR_RZONE_TRACK 0x58
+#define GPCMD_REPORT_KEY 0xa4
+#define GPCMD_REQUEST_SENSE 0x03
+#define GPCMD_RESERVE_RZONE_TRACK 0x53
+#define GPCMD_SCAN 0xba
+#define GPCMD_SEEK 0x2b
+#define GPCMD_SEND_DVD_STRUCTURE 0xad
+#define GPCMD_SEND_EVENT 0xa2
+#define GPCMD_SEND_KEY 0xa3
+#define GPCMD_SEND_OPC 0x54
+#define GPCMD_SET_READ_AHEAD 0xa7
+#define GPCMD_SET_STREAMING 0xb6
+#define GPCMD_START_STOP_UNIT 0x1b
+#define GPCMD_STOP_PLAY_SCAN 0x4e
+#define GPCMD_TEST_UNIT_READY 0x00
+#define GPCMD_VERIFY_10 0x2f
+#define GPCMD_WRITE_10 0x2a
+#define GPCMD_WRITE_AND_VERIFY_10 0x2e
/* This is listed as optional in ATAPI 2.6, but is (curiously)
* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
* Table 377 as an MMC command for SCSi devices though... Most ATAPI
* drives support it. */
-#define GPCMD_SET_SPEED 0xbb
+#define GPCMD_SET_SPEED 0xbb
/* This seems to be a SCSI specific CD-ROM opcode
* to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI 0x48
+#define GPCMD_PLAYAUDIO_TI 0x48
/*
* From MS Media Status Notification Support Specification. For
* older drives only.
*/
-#define GPCMD_GET_MEDIA_STATUS 0xda
-#define GPCMD_MODE_SENSE_6 0x1a
+#define GPCMD_GET_MEDIA_STATUS 0xda
+#define GPCMD_MODE_SENSE_6 0x1a
#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index 26a90ed45f..a68357c1c5 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -36,20 +36,20 @@
#include "trace.h"
/* CMD646 specific */
-#define CFR 0x50
-#define CFR_INTR_CH0 0x04
-#define CNTRL 0x51
-#define CNTRL_EN_CH0 0x04
-#define CNTRL_EN_CH1 0x08
-#define ARTTIM23 0x57
-#define ARTTIM23_INTR_CH1 0x10
-#define MRDMODE 0x71
-#define MRDMODE_INTR_CH0 0x04
-#define MRDMODE_INTR_CH1 0x08
-#define MRDMODE_BLK_CH0 0x10
-#define MRDMODE_BLK_CH1 0x20
-#define UDIDETCR0 0x73
-#define UDIDETCR1 0x7B
+#define CFR 0x50
+#define CFR_INTR_CH0 0x04
+#define CNTRL 0x51
+#define CNTRL_EN_CH0 0x04
+#define CNTRL_EN_CH1 0x08
+#define ARTTIM23 0x57
+#define ARTTIM23_INTR_CH1 0x10
+#define MRDMODE 0x71
+#define MRDMODE_INTR_CH0 0x04
+#define MRDMODE_INTR_CH1 0x08
+#define MRDMODE_BLK_CH0 0x10
+#define MRDMODE_BLK_CH1 0x20
+#define UDIDETCR0 0x73
+#define UDIDETCR1 0x7B
static void cmd646_update_irq(PCIDevice *pd);
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 2d034731cf..45d14a25e9 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -318,52 +318,52 @@ static void ide_cfata_identify(IDEState *s)
cur_sec = s->cylinders * s->heads * s->sectors;
- put_le16(p + 0, 0x848a); /* CF Storage Card signature */
- put_le16(p + 1, s->cylinders); /* Default cylinders */
- put_le16(p + 3, s->heads); /* Default heads */
- put_le16(p + 6, s->sectors); /* Default sectors per track */
+ put_le16(p + 0, 0x848a); /* CF Storage Card signature */
+ put_le16(p + 1, s->cylinders); /* Default cylinders */
+ put_le16(p + 3, s->heads); /* Default heads */
+ put_le16(p + 6, s->sectors); /* Default sectors per track */
/* *(p + 7) := nb_sectors >> 16 -- see ide_cfata_identify_size */
/* *(p + 8) := nb_sectors -- see ide_cfata_identify_size */
padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */
- put_le16(p + 22, 0x0004); /* ECC bytes */
- padstr((char *) (p + 23), s->version, 8); /* Firmware Revision */
+ put_le16(p + 22, 0x0004); /* ECC bytes */
+ padstr((char *) (p + 23), s->version, 8); /* Firmware Revision */
padstr((char *) (p + 27), s->drive_model_str, 40);/* Model number */
#if MAX_MULT_SECTORS > 1
put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS);
#else
put_le16(p + 47, 0x0000);
#endif
- put_le16(p + 49, 0x0f00); /* Capabilities */
- put_le16(p + 51, 0x0002); /* PIO cycle timing mode */
- put_le16(p + 52, 0x0001); /* DMA cycle timing mode */
- put_le16(p + 53, 0x0003); /* Translation params valid */
- put_le16(p + 54, s->cylinders); /* Current cylinders */
- put_le16(p + 55, s->heads); /* Current heads */
- put_le16(p + 56, s->sectors); /* Current sectors */
- put_le16(p + 57, cur_sec); /* Current capacity */
- put_le16(p + 58, cur_sec >> 16); /* Current capacity */
- if (s->mult_sectors) /* Multiple sector setting */
+ put_le16(p + 49, 0x0f00); /* Capabilities */
+ put_le16(p + 51, 0x0002); /* PIO cycle timing mode */
+ put_le16(p + 52, 0x0001); /* DMA cycle timing mode */
+ put_le16(p + 53, 0x0003); /* Translation params valid */
+ put_le16(p + 54, s->cylinders); /* Current cylinders */
+ put_le16(p + 55, s->heads); /* Current heads */
+ put_le16(p + 56, s->sectors); /* Current sectors */
+ put_le16(p + 57, cur_sec); /* Current capacity */
+ put_le16(p + 58, cur_sec >> 16); /* Current capacity */
+ if (s->mult_sectors) /* Multiple sector setting */
put_le16(p + 59, 0x100 | s->mult_sectors);
/* *(p + 60) := nb_sectors -- see ide_cfata_identify_size */
/* *(p + 61) := nb_sectors >> 16 -- see ide_cfata_identify_size */
- put_le16(p + 63, 0x0203); /* Multiword DMA capability */
- put_le16(p + 64, 0x0001); /* Flow Control PIO support */
- put_le16(p + 65, 0x0096); /* Min. Multiword DMA cycle */
- put_le16(p + 66, 0x0096); /* Rec. Multiword DMA cycle */
- put_le16(p + 68, 0x00b4); /* Min. PIO cycle time */
- put_le16(p + 82, 0x400c); /* Command Set supported */
- put_le16(p + 83, 0x7068); /* Command Set supported */
- put_le16(p + 84, 0x4000); /* Features supported */
- put_le16(p + 85, 0x000c); /* Command Set enabled */
- put_le16(p + 86, 0x7044); /* Command Set enabled */
- put_le16(p + 87, 0x4000); /* Features enabled */
- put_le16(p + 91, 0x4060); /* Current APM level */
- put_le16(p + 129, 0x0002); /* Current features option */
- put_le16(p + 130, 0x0005); /* Reassigned sectors */
- put_le16(p + 131, 0x0001); /* Initial power mode */
- put_le16(p + 132, 0x0000); /* User signature */
- put_le16(p + 160, 0x8100); /* Power requirement */
- put_le16(p + 161, 0x8001); /* CF command set */
+ put_le16(p + 63, 0x0203); /* Multiword DMA capability */
+ put_le16(p + 64, 0x0001); /* Flow Control PIO support */
+ put_le16(p + 65, 0x0096); /* Min. Multiword DMA cycle */
+ put_le16(p + 66, 0x0096); /* Rec. Multiword DMA cycle */
+ put_le16(p + 68, 0x00b4); /* Min. PIO cycle time */
+ put_le16(p + 82, 0x400c); /* Command Set supported */
+ put_le16(p + 83, 0x7068); /* Command Set supported */
+ put_le16(p + 84, 0x4000); /* Features supported */
+ put_le16(p + 85, 0x000c); /* Command Set enabled */
+ put_le16(p + 86, 0x7044); /* Command Set enabled */
+ put_le16(p + 87, 0x4000); /* Features enabled */
+ put_le16(p + 91, 0x4060); /* Current APM level */
+ put_le16(p + 129, 0x0002); /* Current features option */
+ put_le16(p + 130, 0x0005); /* Reassigned sectors */
+ put_le16(p + 131, 0x0001); /* Initial power mode */
+ put_le16(p + 132, 0x0000); /* User signature */
+ put_le16(p + 160, 0x8100); /* Power requirement */
+ put_le16(p + 161, 0x8001); /* CF command set */
ide_cfata_identify_size(s);
s->identify_set = 1;
@@ -1131,13 +1131,13 @@ static void ide_cfata_metadata_inquiry(IDEState *s)
memset(p, 0, 0x200);
spd = ((s->mdata_size - 1) >> 9) + 1;
- put_le16(p + 0, 0x0001); /* Data format revision */
- put_le16(p + 1, 0x0000); /* Media property: silicon */
- put_le16(p + 2, s->media_changed); /* Media status */
- put_le16(p + 3, s->mdata_size & 0xffff); /* Capacity in bytes (low) */
- put_le16(p + 4, s->mdata_size >> 16); /* Capacity in bytes (high) */
- put_le16(p + 5, spd & 0xffff); /* Sectors per device (low) */
- put_le16(p + 6, spd >> 16); /* Sectors per device (high) */
+ put_le16(p + 0, 0x0001); /* Data format revision */
+ put_le16(p + 1, 0x0000); /* Media property: silicon */
+ put_le16(p + 2, s->media_changed); /* Media status */
+ put_le16(p + 3, s->mdata_size & 0xffff); /* Capacity in bytes (low) */
+ put_le16(p + 4, s->mdata_size >> 16); /* Capacity in bytes (high) */
+ put_le16(p + 5, spd & 0xffff); /* Sectors per device (low) */
+ put_le16(p + 6, spd >> 16); /* Sectors per device (high) */
}
static void ide_cfata_metadata_read(IDEState *s)
@@ -1153,7 +1153,7 @@ static void ide_cfata_metadata_read(IDEState *s)
p = (uint16_t *) s->io_buffer;
memset(p, 0, 0x200);
- put_le16(p + 0, s->media_changed); /* Media status */
+ put_le16(p + 0, s->media_changed); /* Media status */
memcpy(p + 1, s->mdata_storage + (((s->hcyl << 16) | s->lcyl) << 9),
MIN(MIN(s->mdata_size - (((s->hcyl << 16) | s->lcyl) << 9),
s->nsector << 9), 0x200 - 2));
diff --git a/hw/ide/microdrive.c b/hw/ide/microdrive.c
index f1017f7333..981cfbd97f 100644
--- a/hw/ide/microdrive.c
+++ b/hw/ide/microdrive.c
@@ -40,7 +40,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(MicroDriveState, MICRODRIVE)
/***********************************************************/
/* CF-ATA Microdrive */
-#define METADATA_SIZE 0x20
+#define METADATA_SIZE 0x20
/* DSCM-1XXXX Microdrive hard disk with CF+ II / PCMCIA interface. */
@@ -65,29 +65,29 @@ struct MicroDriveState {
/* Register bitfields */
enum md_opt {
- OPT_MODE_MMAP = 0,
- OPT_MODE_IOMAP16 = 1,
- OPT_MODE_IOMAP1 = 2,
- OPT_MODE_IOMAP2 = 3,
- OPT_MODE = 0x3f,
- OPT_LEVIREQ = 0x40,
- OPT_SRESET = 0x80,
+ OPT_MODE_MMAP = 0,
+ OPT_MODE_IOMAP16 = 1,
+ OPT_MODE_IOMAP1 = 2,
+ OPT_MODE_IOMAP2 = 3,
+ OPT_MODE = 0x3f,
+ OPT_LEVIREQ = 0x40,
+ OPT_SRESET = 0x80,
};
enum md_cstat {
- STAT_INT = 0x02,
- STAT_PWRDWN = 0x04,
- STAT_XE = 0x10,
- STAT_IOIS8 = 0x20,
- STAT_SIGCHG = 0x40,
- STAT_CHANGED = 0x80,
+ STAT_INT = 0x02,
+ STAT_PWRDWN = 0x04,
+ STAT_XE = 0x10,
+ STAT_IOIS8 = 0x20,
+ STAT_SIGCHG = 0x40,
+ STAT_CHANGED = 0x80,
};
enum md_pins {
- PINS_MRDY = 0x02,
- PINS_CRDY = 0x20,
+ PINS_MRDY = 0x02,
+ PINS_CRDY = 0x20,
};
enum md_ctrl {
- CTRL_IEN = 0x02,
- CTRL_SRST = 0x04,
+ CTRL_IEN = 0x02,
+ CTRL_SRST = 0x04,
};
static inline void md_interrupt_update(MicroDriveState *s)
@@ -99,7 +99,7 @@ static inline void md_interrupt_update(MicroDriveState *s)
}
qemu_set_irq(card->slot->irq,
- !(s->stat & STAT_INT) && /* Inverted */
+ !(s->stat & STAT_INT) && /* Inverted */
!(s->ctrl & (CTRL_IEN | CTRL_SRST)) &&
!(s->opt & OPT_SRESET));
}
@@ -145,17 +145,17 @@ static uint8_t md_attr_read(PCMCIACardState *card, uint32_t at)
at -= s->attr_base;
switch (at) {
- case 0x00: /* Configuration Option Register */
+ case 0x00: /* Configuration Option Register */
return s->opt;
- case 0x02: /* Card Configuration Status Register */
+ case 0x02: /* Card Configuration Status Register */
if (s->ctrl & CTRL_IEN) {
return s->stat & ~STAT_INT;
} else {
return s->stat;
}
- case 0x04: /* Pin Replacement Register */
+ case 0x04: /* Pin Replacement Register */
return (s->pins & PINS_CRDY) | 0x0c;
- case 0x06: /* Socket and Copy Register */
+ case 0x06: /* Socket and Copy Register */
return 0x00;
#ifdef VERBOSE
default:
@@ -173,14 +173,14 @@ static void md_attr_write(PCMCIACardState *card, uint32_t at, uint8_t value)
at -= s->attr_base;
switch (at) {
- case 0x00: /* Configuration Option Register */
+ case 0x00: /* Configuration Option Register */
s->opt = value & 0xcf;
if (value & OPT_SRESET) {
device_cold_reset(DEVICE(s));
}
md_interrupt_update(s);
break;
- case 0x02: /* Card Configuration Status Register */
+ case 0x02: /* Card Configuration Status Register */
if ((s->stat ^ value) & STAT_PWRDWN) {
s->pins |= PINS_CRDY;
}
@@ -189,11 +189,11 @@ static void md_attr_write(PCMCIACardState *card, uint32_t at, uint8_t value)
md_interrupt_update(s);
/* Word 170 in Identify Device must be equal to STAT_XE */
break;
- case 0x04: /* Pin Replacement Register */
+ case 0x04: /* Pin Replacement Register */
s->pins &= PINS_CRDY;
s->pins |= value & PINS_MRDY;
break;
- case 0x06: /* Socket and Copy Register */
+ case 0x06: /* Socket and Copy Register */
break;
default:
printf("%s: Bad attribute space register %02x\n", __func__, at);
@@ -232,7 +232,7 @@ static uint16_t md_common_read(PCMCIACardState *card, uint32_t at)
}
switch (at) {
- case 0x0: /* Even RD Data */
+ case 0x0: /* Even RD Data */
case 0x8:
return ide_data_readw(&s->bus, 0);
@@ -245,18 +245,18 @@ static uint16_t md_common_read(PCMCIACardState *card, uint32_t at)
}
s->cycle = !s->cycle;
return ret;
- case 0x9: /* Odd RD Data */
+ case 0x9: /* Odd RD Data */
return s->io >> 8;
- case 0xd: /* Error */
+ case 0xd: /* Error */
return ide_ioport_read(&s->bus, 0x1);
- case 0xe: /* Alternate Status */
+ case 0xe: /* Alternate Status */
ifs = ide_bus_active_if(&s->bus);
if (ifs->blk) {
return ifs->status;
} else {
return 0;
}
- case 0xf: /* Device Address */
+ case 0xf: /* Device Address */
ifs = ide_bus_active_if(&s->bus);
return 0xc2 | ((~ifs->select << 2) & 0x3c);
default:
@@ -296,7 +296,7 @@ static void md_common_write(PCMCIACardState *card, uint32_t at, uint16_t value)
}
switch (at) {
- case 0x0: /* Even WR Data */
+ case 0x0: /* Even WR Data */
case 0x8:
ide_data_writew(&s->bus, 0, value);
break;
@@ -313,10 +313,10 @@ static void md_common_write(PCMCIACardState *card, uint32_t at, uint16_t value)
s->io = value & 0xff;
s->cycle = !s->cycle;
break;
- case 0xd: /* Features */
+ case 0xd: /* Features */
ide_ioport_write(&s->bus, 0x1, value);
break;
- case 0xe: /* Device Control */
+ case 0xe: /* Device Control */
s->ctrl = value;
if (value & CTRL_SRST) {
device_cold_reset(DEVICE(s));
@@ -350,35 +350,35 @@ static const VMStateDescription vmstate_microdrive = {
};
static const uint8_t dscm1xxxx_cis[0x14a] = {
- [0x000] = CISTPL_DEVICE, /* 5V Device Information */
- [0x002] = 0x03, /* Tuple length = 4 bytes */
- [0x004] = 0xdb, /* ID: DTYPE_FUNCSPEC, non WP, DSPEED_150NS */
- [0x006] = 0x01, /* Size = 2K bytes */
+ [0x000] = CISTPL_DEVICE, /* 5V Device Information */
+ [0x002] = 0x03, /* Tuple length = 4 bytes */
+ [0x004] = 0xdb, /* ID: DTYPE_FUNCSPEC, non WP, DSPEED_150NS */
+ [0x006] = 0x01, /* Size = 2K bytes */
[0x008] = CISTPL_ENDMARK,
- [0x00a] = CISTPL_DEVICE_OC, /* Additional Device Information */
- [0x00c] = 0x04, /* Tuple length = 4 byest */
- [0x00e] = 0x03, /* Conditions: Ext = 0, Vcc 3.3V, MWAIT = 1 */
- [0x010] = 0xdb, /* ID: DTYPE_FUNCSPEC, non WP, DSPEED_150NS */
- [0x012] = 0x01, /* Size = 2K bytes */
+ [0x00a] = CISTPL_DEVICE_OC, /* Additional Device Information */
+ [0x00c] = 0x04, /* Tuple length = 4 byest */
+ [0x00e] = 0x03, /* Conditions: Ext = 0, Vcc 3.3V, MWAIT = 1 */
+ [0x010] = 0xdb, /* ID: DTYPE_FUNCSPEC, non WP, DSPEED_150NS */
+ [0x012] = 0x01, /* Size = 2K bytes */
[0x014] = CISTPL_ENDMARK,
- [0x016] = CISTPL_JEDEC_C, /* JEDEC ID */
- [0x018] = 0x02, /* Tuple length = 2 bytes */
- [0x01a] = 0xdf, /* PC Card ATA with no Vpp required */
+ [0x016] = CISTPL_JEDEC_C, /* JEDEC ID */
+ [0x018] = 0x02, /* Tuple length = 2 bytes */
+ [0x01a] = 0xdf, /* PC Card ATA with no Vpp required */
[0x01c] = 0x01,
- [0x01e] = CISTPL_MANFID, /* Manufacture ID */
- [0x020] = 0x04, /* Tuple length = 4 bytes */
- [0x022] = 0xa4, /* TPLMID_MANF = 00a4 (IBM) */
+ [0x01e] = CISTPL_MANFID, /* Manufacture ID */
+ [0x020] = 0x04, /* Tuple length = 4 bytes */
+ [0x022] = 0xa4, /* TPLMID_MANF = 00a4 (IBM) */
[0x024] = 0x00,
- [0x026] = 0x00, /* PLMID_CARD = 0000 */
+ [0x026] = 0x00, /* PLMID_CARD = 0000 */
[0x028] = 0x00,
- [0x02a] = CISTPL_VERS_1, /* Level 1 Version */
- [0x02c] = 0x12, /* Tuple length = 23 bytes */
- [0x02e] = 0x04, /* Major Version = JEIDA 4.2 / PCMCIA 2.1 */
- [0x030] = 0x01, /* Minor Version = 1 */
+ [0x02a] = CISTPL_VERS_1, /* Level 1 Version */
+ [0x02c] = 0x12, /* Tuple length = 23 bytes */
+ [0x02e] = 0x04, /* Major Version = JEIDA 4.2 / PCMCIA 2.1 */
+ [0x030] = 0x01, /* Minor Version = 1 */
[0x032] = 'I',
[0x034] = 'B',
[0x036] = 'M',
@@ -396,142 +396,142 @@ static const uint8_t dscm1xxxx_cis[0x14a] = {
[0x04e] = 0x00,
[0x050] = CISTPL_ENDMARK,
- [0x052] = CISTPL_FUNCID, /* Function ID */
- [0x054] = 0x02, /* Tuple length = 2 bytes */
- [0x056] = 0x04, /* TPLFID_FUNCTION = Fixed Disk */
- [0x058] = 0x01, /* TPLFID_SYSINIT: POST = 1, ROM = 0 */
-
- [0x05a] = CISTPL_FUNCE, /* Function Extension */
- [0x05c] = 0x02, /* Tuple length = 2 bytes */
- [0x05e] = 0x01, /* TPLFE_TYPE = Disk Device Interface */
- [0x060] = 0x01, /* TPLFE_DATA = PC Card ATA Interface */
-
- [0x062] = CISTPL_FUNCE, /* Function Extension */
- [0x064] = 0x03, /* Tuple length = 3 bytes */
- [0x066] = 0x02, /* TPLFE_TYPE = Basic PC Card ATA Interface */
- [0x068] = 0x08, /* TPLFE_DATA: Rotating, Unique, Single */
- [0x06a] = 0x0f, /* TPLFE_DATA: Sleep, Standby, Idle, Auto */
-
- [0x06c] = CISTPL_CONFIG, /* Configuration */
- [0x06e] = 0x05, /* Tuple length = 5 bytes */
- [0x070] = 0x01, /* TPCC_RASZ = 2 bytes, TPCC_RMSZ = 1 byte */
- [0x072] = 0x07, /* TPCC_LAST = 7 */
- [0x074] = 0x00, /* TPCC_RADR = 0200 */
+ [0x052] = CISTPL_FUNCID, /* Function ID */
+ [0x054] = 0x02, /* Tuple length = 2 bytes */
+ [0x056] = 0x04, /* TPLFID_FUNCTION = Fixed Disk */
+ [0x058] = 0x01, /* TPLFID_SYSINIT: POST = 1, ROM = 0 */
+
+ [0x05a] = CISTPL_FUNCE, /* Function Extension */
+ [0x05c] = 0x02, /* Tuple length = 2 bytes */
+ [0x05e] = 0x01, /* TPLFE_TYPE = Disk Device Interface */
+ [0x060] = 0x01, /* TPLFE_DATA = PC Card ATA Interface */
+
+ [0x062] = CISTPL_FUNCE, /* Function Extension */
+ [0x064] = 0x03, /* Tuple length = 3 bytes */
+ [0x066] = 0x02, /* TPLFE_TYPE = Basic PC Card ATA Interface */
+ [0x068] = 0x08, /* TPLFE_DATA: Rotating, Unique, Single */
+ [0x06a] = 0x0f, /* TPLFE_DATA: Sleep, Standby, Idle, Auto */
+
+ [0x06c] = CISTPL_CONFIG, /* Configuration */
+ [0x06e] = 0x05, /* Tuple length = 5 bytes */
+ [0x070] = 0x01, /* TPCC_RASZ = 2 bytes, TPCC_RMSZ = 1 byte */
+ [0x072] = 0x07, /* TPCC_LAST = 7 */
+ [0x074] = 0x00, /* TPCC_RADR = 0200 */
[0x076] = 0x02,
- [0x078] = 0x0f, /* TPCC_RMSK = 200, 202, 204, 206 */
-
- [0x07a] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x07c] = 0x0b, /* Tuple length = 11 bytes */
- [0x07e] = 0xc0, /* TPCE_INDX = Memory Mode, Default, Iface */
- [0x080] = 0xc0, /* TPCE_IF = Memory, no BVDs, no WP, READY */
- [0x082] = 0xa1, /* TPCE_FS = Vcc only, no I/O, Memory, Misc */
- [0x084] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
- [0x086] = 0x55, /* NomV: 5.0 V */
- [0x088] = 0x4d, /* MinV: 4.5 V */
- [0x08a] = 0x5d, /* MaxV: 5.5 V */
- [0x08c] = 0x4e, /* Peakl: 450 mA */
- [0x08e] = 0x08, /* TPCE_MS = 1 window, 1 byte, Host address */
- [0x090] = 0x00, /* Window descriptor: Window length = 0 */
- [0x092] = 0x20, /* TPCE_MI: support power down mode, RW */
-
- [0x094] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x096] = 0x06, /* Tuple length = 6 bytes */
- [0x098] = 0x00, /* TPCE_INDX = Memory Mode, no Default */
- [0x09a] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
- [0x09c] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
- [0x09e] = 0xb5, /* NomV: 3.3 V */
+ [0x078] = 0x0f, /* TPCC_RMSK = 200, 202, 204, 206 */
+
+ [0x07a] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x07c] = 0x0b, /* Tuple length = 11 bytes */
+ [0x07e] = 0xc0, /* TPCE_INDX = Memory Mode, Default, Iface */
+ [0x080] = 0xc0, /* TPCE_IF = Memory, no BVDs, no WP, READY */
+ [0x082] = 0xa1, /* TPCE_FS = Vcc only, no I/O, Memory, Misc */
+ [0x084] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
+ [0x086] = 0x55, /* NomV: 5.0 V */
+ [0x088] = 0x4d, /* MinV: 4.5 V */
+ [0x08a] = 0x5d, /* MaxV: 5.5 V */
+ [0x08c] = 0x4e, /* Peakl: 450 mA */
+ [0x08e] = 0x08, /* TPCE_MS = 1 window, 1 byte, Host address */
+ [0x090] = 0x00, /* Window descriptor: Window length = 0 */
+ [0x092] = 0x20, /* TPCE_MI: support power down mode, RW */
+
+ [0x094] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x096] = 0x06, /* Tuple length = 6 bytes */
+ [0x098] = 0x00, /* TPCE_INDX = Memory Mode, no Default */
+ [0x09a] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
+ [0x09c] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
+ [0x09e] = 0xb5, /* NomV: 3.3 V */
[0x0a0] = 0x1e,
- [0x0a2] = 0x3e, /* Peakl: 350 mA */
-
- [0x0a4] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x0a6] = 0x0d, /* Tuple length = 13 bytes */
- [0x0a8] = 0xc1, /* TPCE_INDX = I/O and Memory Mode, Default */
- [0x0aa] = 0x41, /* TPCE_IF = I/O and Memory, no BVD, no WP */
- [0x0ac] = 0x99, /* TPCE_FS = Vcc only, I/O, Interrupt, Misc */
- [0x0ae] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
- [0x0b0] = 0x55, /* NomV: 5.0 V */
- [0x0b2] = 0x4d, /* MinV: 4.5 V */
- [0x0b4] = 0x5d, /* MaxV: 5.5 V */
- [0x0b6] = 0x4e, /* Peakl: 450 mA */
- [0x0b8] = 0x64, /* TPCE_IO = 16-byte boundary, 16/8 accesses */
- [0x0ba] = 0xf0, /* TPCE_IR = MASK, Level, Pulse, Share */
- [0x0bc] = 0xff, /* IRQ0..IRQ7 supported */
- [0x0be] = 0xff, /* IRQ8..IRQ15 supported */
- [0x0c0] = 0x20, /* TPCE_MI = support power down mode */
-
- [0x0c2] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x0c4] = 0x06, /* Tuple length = 6 bytes */
- [0x0c6] = 0x01, /* TPCE_INDX = I/O and Memory Mode */
- [0x0c8] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
- [0x0ca] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
- [0x0cc] = 0xb5, /* NomV: 3.3 V */
+ [0x0a2] = 0x3e, /* Peakl: 350 mA */
+
+ [0x0a4] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x0a6] = 0x0d, /* Tuple length = 13 bytes */
+ [0x0a8] = 0xc1, /* TPCE_INDX = I/O and Memory Mode, Default */
+ [0x0aa] = 0x41, /* TPCE_IF = I/O and Memory, no BVD, no WP */
+ [0x0ac] = 0x99, /* TPCE_FS = Vcc only, I/O, Interrupt, Misc */
+ [0x0ae] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
+ [0x0b0] = 0x55, /* NomV: 5.0 V */
+ [0x0b2] = 0x4d, /* MinV: 4.5 V */
+ [0x0b4] = 0x5d, /* MaxV: 5.5 V */
+ [0x0b6] = 0x4e, /* Peakl: 450 mA */
+ [0x0b8] = 0x64, /* TPCE_IO = 16-byte boundary, 16/8 accesses */
+ [0x0ba] = 0xf0, /* TPCE_IR = MASK, Level, Pulse, Share */
+ [0x0bc] = 0xff, /* IRQ0..IRQ7 supported */
+ [0x0be] = 0xff, /* IRQ8..IRQ15 supported */
+ [0x0c0] = 0x20, /* TPCE_MI = support power down mode */
+
+ [0x0c2] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x0c4] = 0x06, /* Tuple length = 6 bytes */
+ [0x0c6] = 0x01, /* TPCE_INDX = I/O and Memory Mode */
+ [0x0c8] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
+ [0x0ca] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
+ [0x0cc] = 0xb5, /* NomV: 3.3 V */
[0x0ce] = 0x1e,
- [0x0d0] = 0x3e, /* Peakl: 350 mA */
-
- [0x0d2] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x0d4] = 0x12, /* Tuple length = 18 bytes */
- [0x0d6] = 0xc2, /* TPCE_INDX = I/O Primary Mode */
- [0x0d8] = 0x41, /* TPCE_IF = I/O and Memory, no BVD, no WP */
- [0x0da] = 0x99, /* TPCE_FS = Vcc only, I/O, Interrupt, Misc */
- [0x0dc] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
- [0x0de] = 0x55, /* NomV: 5.0 V */
- [0x0e0] = 0x4d, /* MinV: 4.5 V */
- [0x0e2] = 0x5d, /* MaxV: 5.5 V */
- [0x0e4] = 0x4e, /* Peakl: 450 mA */
- [0x0e6] = 0xea, /* TPCE_IO = 1K boundary, 16/8 access, Range */
- [0x0e8] = 0x61, /* Range: 2 fields, 2 bytes addr, 1 byte len */
- [0x0ea] = 0xf0, /* Field 1 address = 0x01f0 */
+ [0x0d0] = 0x3e, /* Peakl: 350 mA */
+
+ [0x0d2] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x0d4] = 0x12, /* Tuple length = 18 bytes */
+ [0x0d6] = 0xc2, /* TPCE_INDX = I/O Primary Mode */
+ [0x0d8] = 0x41, /* TPCE_IF = I/O and Memory, no BVD, no WP */
+ [0x0da] = 0x99, /* TPCE_FS = Vcc only, I/O, Interrupt, Misc */
+ [0x0dc] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
+ [0x0de] = 0x55, /* NomV: 5.0 V */
+ [0x0e0] = 0x4d, /* MinV: 4.5 V */
+ [0x0e2] = 0x5d, /* MaxV: 5.5 V */
+ [0x0e4] = 0x4e, /* Peakl: 450 mA */
+ [0x0e6] = 0xea, /* TPCE_IO = 1K boundary, 16/8 access, Range */
+ [0x0e8] = 0x61, /* Range: 2 fields, 2 bytes addr, 1 byte len */
+ [0x0ea] = 0xf0, /* Field 1 address = 0x01f0 */
[0x0ec] = 0x01,
- [0x0ee] = 0x07, /* Address block length = 8 */
- [0x0f0] = 0xf6, /* Field 2 address = 0x03f6 */
+ [0x0ee] = 0x07, /* Address block length = 8 */
+ [0x0f0] = 0xf6, /* Field 2 address = 0x03f6 */
[0x0f2] = 0x03,
- [0x0f4] = 0x01, /* Address block length = 2 */
- [0x0f6] = 0xee, /* TPCE_IR = IRQ E, Level, Pulse, Share */
- [0x0f8] = 0x20, /* TPCE_MI = support power down mode */
-
- [0x0fa] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x0fc] = 0x06, /* Tuple length = 6 bytes */
- [0x0fe] = 0x02, /* TPCE_INDX = I/O Primary Mode, no Default */
- [0x100] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
- [0x102] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
- [0x104] = 0xb5, /* NomV: 3.3 V */
+ [0x0f4] = 0x01, /* Address block length = 2 */
+ [0x0f6] = 0xee, /* TPCE_IR = IRQ E, Level, Pulse, Share */
+ [0x0f8] = 0x20, /* TPCE_MI = support power down mode */
+
+ [0x0fa] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x0fc] = 0x06, /* Tuple length = 6 bytes */
+ [0x0fe] = 0x02, /* TPCE_INDX = I/O Primary Mode, no Default */
+ [0x100] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
+ [0x102] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
+ [0x104] = 0xb5, /* NomV: 3.3 V */
[0x106] = 0x1e,
- [0x108] = 0x3e, /* Peakl: 350 mA */
-
- [0x10a] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x10c] = 0x12, /* Tuple length = 18 bytes */
- [0x10e] = 0xc3, /* TPCE_INDX = I/O Secondary Mode, Default */
- [0x110] = 0x41, /* TPCE_IF = I/O and Memory, no BVD, no WP */
- [0x112] = 0x99, /* TPCE_FS = Vcc only, I/O, Interrupt, Misc */
- [0x114] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
- [0x116] = 0x55, /* NomV: 5.0 V */
- [0x118] = 0x4d, /* MinV: 4.5 V */
- [0x11a] = 0x5d, /* MaxV: 5.5 V */
- [0x11c] = 0x4e, /* Peakl: 450 mA */
- [0x11e] = 0xea, /* TPCE_IO = 1K boundary, 16/8 access, Range */
- [0x120] = 0x61, /* Range: 2 fields, 2 byte addr, 1 byte len */
- [0x122] = 0x70, /* Field 1 address = 0x0170 */
+ [0x108] = 0x3e, /* Peakl: 350 mA */
+
+ [0x10a] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x10c] = 0x12, /* Tuple length = 18 bytes */
+ [0x10e] = 0xc3, /* TPCE_INDX = I/O Secondary Mode, Default */
+ [0x110] = 0x41, /* TPCE_IF = I/O and Memory, no BVD, no WP */
+ [0x112] = 0x99, /* TPCE_FS = Vcc only, I/O, Interrupt, Misc */
+ [0x114] = 0x27, /* NomV = 1, MinV = 1, MaxV = 1, Peakl = 1 */
+ [0x116] = 0x55, /* NomV: 5.0 V */
+ [0x118] = 0x4d, /* MinV: 4.5 V */
+ [0x11a] = 0x5d, /* MaxV: 5.5 V */
+ [0x11c] = 0x4e, /* Peakl: 450 mA */
+ [0x11e] = 0xea, /* TPCE_IO = 1K boundary, 16/8 access, Range */
+ [0x120] = 0x61, /* Range: 2 fields, 2 byte addr, 1 byte len */
+ [0x122] = 0x70, /* Field 1 address = 0x0170 */
[0x124] = 0x01,
- [0x126] = 0x07, /* Address block length = 8 */
- [0x128] = 0x76, /* Field 2 address = 0x0376 */
+ [0x126] = 0x07, /* Address block length = 8 */
+ [0x128] = 0x76, /* Field 2 address = 0x0376 */
[0x12a] = 0x03,
- [0x12c] = 0x01, /* Address block length = 2 */
- [0x12e] = 0xee, /* TPCE_IR = IRQ E, Level, Pulse, Share */
- [0x130] = 0x20, /* TPCE_MI = support power down mode */
-
- [0x132] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
- [0x134] = 0x06, /* Tuple length = 6 bytes */
- [0x136] = 0x03, /* TPCE_INDX = I/O Secondary Mode */
- [0x138] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
- [0x13a] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
- [0x13c] = 0xb5, /* NomV: 3.3 V */
+ [0x12c] = 0x01, /* Address block length = 2 */
+ [0x12e] = 0xee, /* TPCE_IR = IRQ E, Level, Pulse, Share */
+ [0x130] = 0x20, /* TPCE_MI = support power down mode */
+
+ [0x132] = CISTPL_CFTABLE_ENTRY, /* 16-bit PC Card Configuration */
+ [0x134] = 0x06, /* Tuple length = 6 bytes */
+ [0x136] = 0x03, /* TPCE_INDX = I/O Secondary Mode */
+ [0x138] = 0x01, /* TPCE_FS = Vcc only, no I/O, no Memory */
+ [0x13a] = 0x21, /* NomV = 1, MinV = 0, MaxV = 0, Peakl = 1 */
+ [0x13c] = 0xb5, /* NomV: 3.3 V */
[0x13e] = 0x1e,
- [0x140] = 0x3e, /* Peakl: 350 mA */
+ [0x140] = 0x3e, /* Peakl: 350 mA */
- [0x142] = CISTPL_NO_LINK, /* No Link */
- [0x144] = 0x00, /* Tuple length = 0 bytes */
+ [0x142] = CISTPL_NO_LINK, /* No Link */
+ [0x144] = 0x00, /* Tuple length = 0 bytes */
- [0x146] = CISTPL_END, /* Tuple End */
+ [0x146] = CISTPL_END, /* Tuple End */
};
#define TYPE_DSCM1XXXX "dscm1xxxx"
--
2.31.1
next prev parent reply other threads:[~2023-03-24 15:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-24 15:36 [PULL 0/8] Misc patches for QEMU 8.0-rc2 Thomas Huth
2023-03-24 15:36 ` Thomas Huth [this message]
2023-03-24 15:36 ` [PULL 2/8] hw/block: replace TABs with space Thomas Huth
2023-03-24 15:36 ` [PULL 3/8] target/s390x: Fix float_comp_to_cc() prototype Thomas Huth
2023-03-24 15:36 ` [PULL 4/8] target/ppc: Fix helper_pminsn() prototype Thomas Huth
2023-03-24 15:36 ` [PULL 5/8] ui/spice: fix compilation on win32 Thomas Huth
2023-03-24 15:36 ` [PULL 6/8] gitlab-ci: Cover SPICE in the MSYS2 job Thomas Huth
2023-03-24 15:36 ` [PULL 7/8] cirrus-ci: Remove MSYS2 jobs duplicated with gitlab-ci Thomas Huth
2023-03-24 15:36 ` [PULL 8/8] Revert "docs/about/deprecated: Deprecate 32-bit arm hosts for system emulation" Thomas Huth
2023-03-25 16:29 ` [PULL 0/8] Misc patches for QEMU 8.0-rc2 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230324153610.224673-2-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=fufuyqqqqqq@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.