[PATCH v4 7/7] arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node

[Abel Vesa <abel.vesa@linaro.org>]

Add support for UFS ICE by adding the qcom,ice property and the
ICE dedicated devicetree node. While at it, add the reg-name property
to the UFS HC node to be in line with older platforms.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

The v3 (RFC) is here:
https://lore.kernel.org/all/20230313115202.3960700-8-abel.vesa@linaro.org/

Changes since v3:
 * none

 arch/arm64/boot/dts/qcom/sm8550.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index c6613654942a..dcfbbf33663a 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1889,6 +1889,7 @@ ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
+			reg-names = "std";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
@@ -1932,9 +1933,18 @@ ufs_mem_hc: ufs@1d84000 {
 				<0 0>,
 				<0 0>,
 				<0 0>;
+			qcom,ice = <&ice>;
+
 			status = "disabled";
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8550-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
-- 
2.34.1