All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
	Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Subject: [PATCH v12 21/22] app/test: remove use of RTE_LOGTYPE_PIPELINE
Date: Wed, 29 Mar 2023 16:40:48 -0700	[thread overview]
Message-ID: <20230329234049.11071-22-stephen@networkplumber.org> (raw)
In-Reply-To: <20230329234049.11071-1-stephen@networkplumber.org>

Instead of using static type PIPELINE for logging in test application
use stderr instead.  If not testing RTE_LOG() better to not use
it since log also goes to syslog.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test/test_table_acl.c      | 50 ++++++++++++++++------------------
 app/test/test_table_pipeline.c | 40 +++++++++++++--------------
 2 files changed, 43 insertions(+), 47 deletions(-)

diff --git a/app/test/test_table_acl.c b/app/test/test_table_acl.c
index e66f06b84d0a..dff9bddfb948 100644
--- a/app/test/test_table_acl.c
+++ b/app/test/test_table_acl.c
@@ -165,7 +165,7 @@ parse_cb_ipv4_rule(char *str, struct rte_table_acl_rule_add_params *v)
 		&v->field_value[SRC_FIELD_IPV4].value.u32,
 		&v->field_value[SRC_FIELD_IPV4].mask_range.u32);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read src address/mask: %s\n",
+		fprintf(stderr, "failed to read src address/mask: %s\n",
 			in[CB_FLD_SRC_ADDR]);
 		return rc;
 	}
@@ -178,7 +178,7 @@ parse_cb_ipv4_rule(char *str, struct rte_table_acl_rule_add_params *v)
 		&v->field_value[DST_FIELD_IPV4].value.u32,
 		&v->field_value[DST_FIELD_IPV4].mask_range.u32);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read dest address/mask: %s\n",
+		fprintf(stderr, "failed to read dest address/mask: %s\n",
 			in[CB_FLD_DST_ADDR]);
 		return rc;
 	}
@@ -190,7 +190,7 @@ parse_cb_ipv4_rule(char *str, struct rte_table_acl_rule_add_params *v)
 		&v->field_value[SRCP_FIELD_IPV4].value.u16,
 		&v->field_value[SRCP_FIELD_IPV4].mask_range.u16);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read source port range: %s\n",
+		fprintf(stderr, "failed to read source port range: %s\n",
 			in[CB_FLD_SRC_PORT_RANGE]);
 		return rc;
 	}
@@ -202,7 +202,7 @@ parse_cb_ipv4_rule(char *str, struct rte_table_acl_rule_add_params *v)
 		&v->field_value[DSTP_FIELD_IPV4].value.u16,
 		&v->field_value[DSTP_FIELD_IPV4].mask_range.u16);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read dest port range: %s\n",
+		fprintf(stderr, "failed to read dest port range: %s\n",
 			in[CB_FLD_DST_PORT_RANGE]);
 		return rc;
 	}
@@ -254,7 +254,7 @@ parse_cb_ipv4_rule_del(char *str, struct rte_table_acl_rule_delete_params *v)
 		&v->field_value[SRC_FIELD_IPV4].value.u32,
 		&v->field_value[SRC_FIELD_IPV4].mask_range.u32);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read src address/mask: %s\n",
+		fprintf(stderr, "failed to read src address/mask: %s\n",
 			in[CB_FLD_SRC_ADDR]);
 		return rc;
 	}
@@ -267,7 +267,7 @@ parse_cb_ipv4_rule_del(char *str, struct rte_table_acl_rule_delete_params *v)
 		&v->field_value[DST_FIELD_IPV4].value.u32,
 		&v->field_value[DST_FIELD_IPV4].mask_range.u32);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read dest address/mask: %s\n",
+		fprintf(stderr, "failed to read dest address/mask: %s\n",
 			in[CB_FLD_DST_ADDR]);
 		return rc;
 	}
@@ -279,7 +279,7 @@ parse_cb_ipv4_rule_del(char *str, struct rte_table_acl_rule_delete_params *v)
 		&v->field_value[SRCP_FIELD_IPV4].value.u16,
 		&v->field_value[SRCP_FIELD_IPV4].mask_range.u16);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read source port range: %s\n",
+		fprintf(stderr, "failed to read source port range: %s\n",
 			in[CB_FLD_SRC_PORT_RANGE]);
 		return rc;
 	}
@@ -291,7 +291,7 @@ parse_cb_ipv4_rule_del(char *str, struct rte_table_acl_rule_delete_params *v)
 		&v->field_value[DSTP_FIELD_IPV4].value.u16,
 		&v->field_value[DSTP_FIELD_IPV4].mask_range.u16);
 	if (rc != 0) {
-		RTE_LOG(ERR, PIPELINE, "failed to read dest port range: %s\n",
+		fprintf(stderr, "failed to read dest port range: %s\n",
 			in[CB_FLD_DST_PORT_RANGE]);
 		return rc;
 	}
@@ -346,7 +346,7 @@ setup_acl_pipeline(void)
 	/* Pipeline configuration */
 	p = rte_pipeline_create(&pipeline_params);
 	if (p == NULL) {
-		RTE_LOG(INFO, PIPELINE, "%s: Failed to configure pipeline\n",
+		fprintf(stderr, "%s: Failed to configure pipeline\n",
 			__func__);
 		goto fail;
 	}
@@ -410,7 +410,7 @@ setup_acl_pipeline(void)
 		table_params.f_action_miss = NULL;
 		table_params.action_data_size = 0;
 
-		RTE_LOG(INFO, PIPELINE, "miss_action=%x\n",
+		printf("miss_action=%x\n",
 			table_entry_miss_action);
 
 		printf("RTE_ACL_RULE_SZ(%zu) = %zu\n", DIM(ipv4_defs),
@@ -471,9 +471,8 @@ setup_acl_pipeline(void)
 
 			ret = parser(line, &keys[n]);
 			if (ret != 0) {
-				RTE_LOG(ERR, PIPELINE,
-					"line %u: parse_cb_ipv4vlan_rule"
-					" failed, error code: %d (%s)\n",
+				fprintf(stderr,
+					"line %u: parse_cb_ipv4vlan_rule failed, error code: %d (%s)\n",
 					n, ret, strerror(-ret));
 				return ret;
 			}
@@ -513,9 +512,8 @@ setup_acl_pipeline(void)
 
 			ret = parse_cb_ipv4_rule_del(line, &keys[n]);
 			if (ret != 0) {
-				RTE_LOG(ERR, PIPELINE,
-					"line %u: parse_cb_ipv4vlan_rule"
-					" failed, error code: %d (%s)\n",
+				fprintf(stderr,
+					"line %u: parse_cb_ipv4vlan_rule failed, error code: %d (%s)\n",
 					n, ret, strerror(-ret));
 				return ret;
 			}
@@ -549,9 +547,8 @@ setup_acl_pipeline(void)
 
 			ret = parser(line, &rule_params);
 			if (ret != 0) {
-				RTE_LOG(ERR, PIPELINE,
-					"line %u: parse_cb_ipv4vlan_rule"
-					" failed, error code: %d (%s)\n",
+				fprintf(stderr,
+					"line %u: parse_cb_ipv4vlan_rule failed, error code: %d (%s)\n",
 					n, ret, strerror(-ret));
 				return ret;
 			}
@@ -575,8 +572,8 @@ setup_acl_pipeline(void)
 
 			ret = parser(line, &rule_params);
 			if (ret != 0) {
-				RTE_LOG(ERR, PIPELINE, "line %u: parse rule "
-					" failed, error code: %d (%s)\n",
+				fprintf(stderr,
+					"line %u: parse rule failed, error code: %d (%s)\n",
 					n, ret, strerror(-ret));
 				return ret;
 			}
@@ -602,8 +599,8 @@ setup_acl_pipeline(void)
 
 			ret = parser(line, &rule_params);
 			if (ret != 0) {
-				RTE_LOG(ERR, PIPELINE, "line %u: parse rule"
-					" failed, error code: %d (%s)\n",
+				fprintf(stderr,
+					"line %u: parse rule failed, error code: %d (%s)\n",
 					n, ret, strerror(-ret));
 				return ret;
 			}
@@ -667,7 +664,7 @@ test_pipeline_single_filter(int expected_count)
 
 			memcpy(rte_pktmbuf_mtod(mbuf, char *), &five_tuple,
 				sizeof(struct ipv4_5tuple));
-			RTE_LOG(INFO, PIPELINE, "%s: Enqueue onto ring %d\n",
+			printf("%s: Enqueue onto ring %d\n",
 				__func__, i);
 			rte_ring_enqueue(rings_rx[i], mbuf);
 		}
@@ -702,9 +699,8 @@ test_pipeline_single_filter(int expected_count)
 	}
 
 	if (tx_count != expected_count) {
-		RTE_LOG(INFO, PIPELINE,
-			"%s: Unexpected packets for ACL test, "
-			"expected %d, got %d\n",
+		fprintf(stderr,
+			"%s: Unexpected packets for ACL test, expected %d, got %d\n",
 			__func__, expected_count, tx_count);
 		goto fail;
 	}
diff --git a/app/test/test_table_pipeline.c b/app/test/test_table_pipeline.c
index 7adbbffbf55d..960f730cf20d 100644
--- a/app/test/test_table_pipeline.c
+++ b/app/test/test_table_pipeline.c
@@ -6,7 +6,6 @@
 
 #include <string.h>
 #include <rte_pipeline.h>
-#include <rte_log.h>
 #include <inttypes.h>
 #include <rte_hexdump.h>
 #include "test_table.h"
@@ -173,30 +172,31 @@ check_pipeline_invalid_params(void)
 
 	p = rte_pipeline_create(NULL);
 	if (p != NULL) {
-		RTE_LOG(INFO, PIPELINE,
+		fprintf(stderr,
 			"%s: configured pipeline with null params\n",
 			__func__);
 		goto fail;
 	}
 	p = rte_pipeline_create(&pipeline_params_1);
 	if (p != NULL) {
-		RTE_LOG(INFO, PIPELINE, "%s: Configure pipeline with NULL "
-			"name\n", __func__);
+		fprintf(stderr,
+			"%s: Configure pipeline with NULL name\n", __func__);
 		goto fail;
 	}
 
 	p = rte_pipeline_create(&pipeline_params_2);
 	if (p != NULL) {
-		RTE_LOG(INFO, PIPELINE, "%s: Configure pipeline with invalid "
-			"socket\n", __func__);
+		fprintf(stderr,
+			"%s: Configure pipeline with invalid socket\n", __func__);
 		goto fail;
 	}
 
 	if (rte_eal_has_hugepages()) {
 		p = rte_pipeline_create(&pipeline_params_3);
 		if (p != NULL) {
-			RTE_LOG(INFO, PIPELINE, "%s: Configure pipeline with "
-				"invalid socket\n", __func__);
+			fprintf(stderr,
+				"%s: Configure pipeline with invalid socket\n",
+				__func__);
 			goto fail;
 		}
 	}
@@ -224,20 +224,20 @@ setup_pipeline(int test_type)
 		.socket_id = 0,
 	};
 
-	RTE_LOG(INFO, PIPELINE, "%s: **** Setting up %s test\n",
+	fprintf(stderr, "%s: **** Setting up %s test\n",
 		__func__, pipeline_test_names[test_type]);
 
 	/* Pipeline configuration */
 	p = rte_pipeline_create(&pipeline_params);
 	if (p == NULL) {
-		RTE_LOG(INFO, PIPELINE, "%s: Failed to configure pipeline\n",
+		fprintf(stderr, "%s: Failed to configure pipeline\n",
 			__func__);
 		goto fail;
 	}
 
 	ret = rte_pipeline_free(p);
 	if (ret != 0) {
-		RTE_LOG(INFO, PIPELINE, "%s: Failed to free pipeline\n",
+		fprintf(stderr, "%s: Failed to free pipeline\n",
 			__func__);
 		goto fail;
 	}
@@ -245,7 +245,7 @@ setup_pipeline(int test_type)
 	/* Pipeline configuration */
 	p = rte_pipeline_create(&pipeline_params);
 	if (p == NULL) {
-		RTE_LOG(INFO, PIPELINE, "%s: Failed to configure pipeline\n",
+		fprintf(stderr, "%s: Failed to configure pipeline\n",
 			__func__);
 		goto fail;
 	}
@@ -411,7 +411,7 @@ test_pipeline_single_filter(int test_type, int expected_count)
 	int ret;
 	int tx_count;
 
-	RTE_LOG(INFO, PIPELINE, "%s: **** Running %s test\n",
+	fprintf(stderr, "%s: **** Running %s test\n",
 		__func__, pipeline_test_names[test_type]);
 	/* Run pipeline once */
 	for (i = 0; i < N_PORTS; i++)
@@ -420,7 +420,7 @@ test_pipeline_single_filter(int test_type, int expected_count)
 
 	ret = rte_pipeline_flush(NULL);
 	if (ret != -EINVAL) {
-		RTE_LOG(INFO, PIPELINE,
+		fprintf(stderr,
 			"%s: No pipeline flush error NULL pipeline (%d)\n",
 			__func__, ret);
 		goto fail;
@@ -445,7 +445,7 @@ test_pipeline_single_filter(int test_type, int expected_count)
 			k32 = (uint32_t *) key;
 			k32[0] = 0xadadadad >> (j % 2);
 
-			RTE_LOG(INFO, PIPELINE, "%s: Enqueue onto ring %d\n",
+			fprintf(stderr, "%s: Enqueue onto ring %d\n",
 				__func__, i);
 			rte_ring_enqueue(rings_rx[i], m);
 		}
@@ -487,9 +487,9 @@ test_pipeline_single_filter(int test_type, int expected_count)
 	}
 
 	if (tx_count != expected_count) {
-		RTE_LOG(INFO, PIPELINE,
-			"%s: Unexpected packets out for %s test, expected %d, "
-			"got %d\n", __func__, pipeline_test_names[test_type],
+		fprintf(stderr,
+			"%s: Unexpected packets out for %s test, expected %d, got %d\n",
+			__func__, pipeline_test_names[test_type],
 			expected_count, tx_count);
 		goto fail;
 	}
@@ -564,8 +564,8 @@ test_table_pipeline(void)
 	connect_miss_action_to_table = 0;
 
 	if (check_pipeline_invalid_params()) {
-		RTE_LOG(INFO, PIPELINE, "%s: Check pipeline invalid params "
-			"failed.\n", __func__);
+		fprintf(stderr, "%s: Check pipeline invalid params failed.\n",
+			__func__);
 		return -1;
 	}
 
-- 
2.39.2


  parent reply	other threads:[~2023-03-29 23:42 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-29 23:40 [PATCH v12 00/22] Covert static log types in libraries to dynamic Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 01/22] gso: don't log message on non TCP/UDP Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 02/22] eal: drop no longer used GSO logtype Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 03/22] log: drop unused RTE_LOGTYPE_TIMER Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 04/22] efd: convert RTE_LOGTYPE_EFD to dynamic type Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 05/22] mbuf: convert RTE_LOGTYPE_MBUF " Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 06/22] acl: convert RTE_LOGTYPE_ACL " Stephen Hemminger
2023-06-05 13:40   ` Константин Ананьев
2023-03-29 23:40 ` [PATCH v12 07/22] examples/power: replace use of RTE_LOGTYPE_POWER Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 08/22] examples/l3fwd-power: " Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 09/22] power: convert RTE_LOGTYPE_POWER to dynamic type Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 10/22] ring: convert RTE_LOGTYPE_RING " Stephen Hemminger
2023-06-05 13:41   ` Константин Ананьев
2023-03-29 23:40 ` [PATCH v12 11/22] mempool: convert RTE_LOGTYPE_MEMPOOL " Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 12/22] lpm: convert RTE_LOGTYPE_LPM to dynamic types Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 13/22] kni: convert RTE_LOGTYPE_KNI to dynamic type Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 14/22] sched: convert RTE_LOGTYPE_SCHED " Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 15/22] examples/ipsec-secgw: replace RTE_LOGTYPE_PORT Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 16/22] port: convert RTE_LOGTYPE_PORT to dynamic type Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 17/22] hash: move rte_thash_gfni stubs out of header file Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 18/22] hash: move rte_hash_set_alg out header Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 19/22] hash: convert RTE_LOGTYPE_HASH to dynamic type Stephen Hemminger
2023-03-29 23:40 ` [PATCH v12 20/22] table: convert RTE_LOGTYPE_TABLE " Stephen Hemminger
2023-03-29 23:40 ` Stephen Hemminger [this message]
2023-03-29 23:40 ` [PATCH v12 22/22] pipeline: convert RTE_LOGTYPE_PIPELINE " Stephen Hemminger
2023-08-21 16:09 ` [PATCH v13 00/21] Convert static log types in libraries to dynamic types Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 01/21] gso: don't log message on non TCP/UDP Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 02/21] eal: drop no longer used GSO logtype Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 03/21] log: drop unused RTE_LOGTYPE_TIMER Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 04/21] efd: convert RTE_LOGTYPE_EFD to dynamic type Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 05/21] mbuf: convert RTE_LOGTYPE_MBUF " Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 06/21] acl: convert RTE_LOGTYPE_ACL " Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 07/21] examples/power: replace use of RTE_LOGTYPE_POWER Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 08/21] examples/l3fwd-power: " Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 09/21] power: convert RTE_LOGTYPE_POWER to dynamic type Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 10/21] ring: convert RTE_LOGTYPE_RING " Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 11/21] mempool: convert RTE_LOGTYPE_MEMPOOL " Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 12/21] lpm: convert RTE_LOGTYPE_LPM to dynamic types Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 13/21] sched: convert RTE_LOGTYPE_SCHED to dynamic type Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 14/21] examples/ipsec-secgw: replace RTE_LOGTYPE_PORT Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 15/21] port: convert RTE_LOGTYPE_PORT to dynamic type Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 16/21] hash: move rte_thash_gfni stubs out of header file Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 17/21] hash: move rte_hash_set_alg out header Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 18/21] hash: convert RTE_LOGTYPE_HASH to dynamic type Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 19/21] table: convert RTE_LOGTYPE_TABLE " Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 20/21] app/test: remove use of RTE_LOGTYPE_PIPELINE Stephen Hemminger
2023-08-21 16:09   ` [PATCH v13 21/21] pipeline: convert RTE_LOGTYPE_PIPELINE to dynamic type Stephen Hemminger
2023-12-04 12:32   ` [PATCH v13 00/21] Convert static log types in libraries to dynamic types David Marchand
2023-12-05  2:09 ` [PATCH 00/18] Convert static log types in libraries to dynamic Stephen Hemminger
2023-12-05  2:09   ` [PATCH 01/18] gso: don't log message on non TCP/UDP Stephen Hemminger
2023-12-05  2:09   ` [PATCH 02/18] eal: drop no longer used GSO logtype Stephen Hemminger
2023-12-05  2:09   ` [PATCH 03/18] log: drop unused RTE_LOGTYPE_TIMER Stephen Hemminger
2023-12-05  2:09   ` [PATCH 04/18] efd: convert RTE_LOGTYPE_EFD to dynamic type Stephen Hemminger
2023-12-05  2:09   ` [PATCH 05/18] mbuf: convert RTE_LOGTYPE_MBUF " Stephen Hemminger
2023-12-05  2:09   ` [PATCH 06/18] acl: convert RTE_LOGTYPE_ACL " Stephen Hemminger
2023-12-05  2:09   ` [PATCH 07/18] examples/power: replace use of RTE_LOGTYPE_POWER Stephen Hemminger
2023-12-05  2:09   ` [PATCH 08/18] examples/l3fwd-power: " Stephen Hemminger
2023-12-05  2:09   ` [PATCH 09/18] power: convert RTE_LOGTYPE_POWER to dynamic type Stephen Hemminger
2023-12-05  2:09   ` [PATCH 10/18] ring: convert RTE_LOGTYPE_RING " Stephen Hemminger
2023-12-05  2:09   ` [PATCH 11/18] mempool: convert RTE_LOGTYPE_MEMPOOL " Stephen Hemminger
2023-12-05  2:09   ` [PATCH 12/18] lpm: convert RTE_LOGTYPE_LPM to dynamic types Stephen Hemminger
2023-12-05  2:09   ` [PATCH 13/18] sched: convert RTE_LOGTYPE_SCHED to dynamic type Stephen Hemminger
2023-12-05  2:09   ` [PATCH 14/18] examples/ipsec-secgw: replace RTE_LOGTYPE_PORT Stephen Hemminger
2023-12-05  2:09   ` [PATCH 15/18] app/test: remove use of RTE_LOGTYPE_PIPELINE Stephen Hemminger
2023-12-05  2:09   ` [PATCH 16/18] hash: mover rte_thash_gfni stubs out of header file Stephen Hemminger
2023-12-05  2:09   ` [PATCH 17/18] hash: move rte_hash_set_alg " Stephen Hemminger
2023-12-05  2:09   ` [PATCH 18/18] hash: convert RTE_LOGTYPE_HASH to dynamic type Stephen Hemminger
2023-12-06 10:08   ` [PATCH 00/18] Convert static log types in libraries to dynamic David Marchand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230329234049.11071-22-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=cristian.dumitrescu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.