All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kelsey Steele <kelseysteele@linux.microsoft.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org, patches@lists.linux.dev,
	linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, linux@roeck-us.net, shuah@kernel.org,
	patches@kernelci.org, lkft-triage@lists.linaro.org,
	pavel@denx.de, jonathanh@nvidia.com, f.fainelli@gmail.com,
	sudipm.mukherjee@gmail.com, srw@sladewatkins.net, rwarsow@gmx.de,
	decui@microsoft.com, petrtesarik@huaweicloud.com,
	linux-hyperv@vger.kernel.org, iommu@lists.linux.dev,
	robin.murphy@arm.com, dexuan.linux@gmail.com,
	tyler.hicks@microsoft.com
Subject: Re: [PATCH 6.1 000/179] 6.1.23-rc2 review
Date: Tue, 4 Apr 2023 17:35:49 -0700	[thread overview]
Message-ID: <20230405003549.GA21326@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net> (raw)
In-Reply-To: <20230404183150.381314754@linuxfoundation.org>

On Tue, Apr 04, 2023 at 08:32:15PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.23 release.
> There are 179 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 06 Apr 2023 18:31:13 +0000.
> Anything received after that time might be too late.
> 

Hi Greg, 

6.1.23-rc2 is failing to boot on x86 WSL. A bisect leads to commit
c2f05366b687 ("swiotlb: fix slot alignment checks") being the problem
and reverting this patch puts everything back in a working state.

There's a report from Dexuan who also encountered this error on a Linux
VM on Hyper-V:

https://lore.kernel.org/all/CAA42JLa1y9jJ7BgQvXeUYQh-K2mDNHd2BYZ4iZUz33r5zY7oAQ@mail.gmail.com/

Adding a chunk of my log below which shows errors occuring from the hv_strvsc driver.

+cc Dexuan, Petr, Tyler, Hyper-V list, swiotlb list and maintainers

-Kelsey



[    1.796960] scsi 0:0:0:0: Direct-Access
PQ: 0 ANSI: 0
[    1.798026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.799408] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
[    1.800296] sd 0:0:0:0: [sda] 1 512-byte logical blocks: (512 B/512
B)
[    1.801029] sd 0:0:0:0: [sda] 0-byte physical blocks
[    1.804195] sd 0:0:0:0: [sda] Write Protect is on
[    1.804820] sd 0:0:0:0: [sda] Mode Sense: 0f 00 80 00
[    1.806353] scsi 0:1:1:0: Direct-Access
PQ: 0 ANSI: 0
[    1.806711] sd 0:0:0:0: [sda] Asking for cache data failed
[    1.807534] sd 0:1:1:0: Attached scsi generic sg9 type 0
[    1.808063] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    1.809789] sd 0:1:1:0: [sdj] Test Unit Ready failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.810476] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
[    1.810988] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#520
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.812072] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#521
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.812943] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#522
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.812966] scsi 0:4:0:0: Direct-Access
PQ: 0 ANSI: 0
[    1.813001] sd 0:1:1:0: [sdj] Read Capacity(10) failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.813097] scsi 0:4:0:0: Attached scsi generic sg10 type 0
[    1.815128] sd 0:4:0:0: [sdk] Test Unit Ready failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.815790] scsi 0:6:0:0: Direct-Access
PQ: 0 ANSI: 0
[    1.815949] sd 0:6:0:0: Attached scsi generic sg11 type 0
[    1.816072] sd 0:0:0:0: [sda] Write Protect is off
[    1.816075] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[    1.816466] sd 0:1:1:0: [sdj] Sense not available.
[    1.816515] sd 0:1:1:0: [sdj] 0 512-byte logical blocks: (0 B/0 B)
[    1.816517] sd 0:1:1:0: [sdj] 0-byte physical blocks
[    1.816974] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#155
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.817056] sd 0:1:1:0: [sdj] Write Protect is off
[    1.817058] sd 0:1:1:0: [sdj] Mode Sense: 00 00 00 00
[    1.817756] sd 0:6:0:0: [sdl] Test Unit Ready failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.818109] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#67
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.820136] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#68
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.821920] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#69
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.822789] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#156
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.823115] sd 0:1:1:0: [sdj] Asking for cache data failed
[    1.823367] sd 0:6:0:0: [sdl] Read Capacity(10) failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.823373] sd 0:6:0:0: [sdl] Sense not available.
[    1.823376] sd 0:6:0:0: [sdl] 0 512-byte logical blocks: (0 B/0 B)
[    1.823377] sd 0:6:0:0: [sdl] 0-byte physical blocks
[    1.825457] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.825632] sd 0:6:0:0: [sdl] Write Protect is off
[    1.825636] sd 0:6:0:0: [sdl] Mode Sense: 00 00 00 00
[    1.825934] sd 0:1:1:0: [sdj] Assuming drive cache: write through
[    1.825970] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#157
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.826005] sd 0:6:0:0: [sdl] Asking for cache data failed
[    1.826007] sd 0:6:0:0: [sdl] Assuming drive cache: write through
[    1.826092] sd 0:4:0:0: [sdk] Read Capacity(10) failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.826141] sd 0:1:1:0: [sdj] Attached SCSI disk
[    1.826649] sd 0:6:0:0: [sdl] Attached SCSI disk
[    1.845293] sd 0:4:0:0: [sdk] Sense not available.
[    1.846327] sd 0:4:0:0: [sdk] 0 512-byte logical blocks: (0 B/0 B)
[    1.847370] sd 0:4:0:0: [sdk] 0-byte physical blocks
[    1.854709] sd 0:4:0:0: [sdk] Write Protect is off
[    1.855569] sd 0:4:0:0: [sdk] Mode Sense: 00 00 00 00
[    1.858191] sd 0:4:0:0: [sdk] Asking for cache data failed
[    1.858876] sd 0:4:0:0: [sdk] Assuming drive cache: write through
[    1.860270] sd 0:4:0:0: [sdk] Attached SCSI disk
[    1.965050] scsi 0:0:0:0: Direct-Access
PQ: 0 ANSI: 0
[    1.966030] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.966347] sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
[    1.967120] sd 0:0:0:0: [sda] 1 512-byte logical blocks: (512 B/512
B)
[    1.967175] scsi 0:0:0:1: Direct-Access     Msft     Virtual Disk
1.0  PQ: 0 ANSI: 5
[    1.967644] sd 0:0:0:0: [sda] 0-byte physical blocks
[    1.968899] scsi 0:0:0:1: scsi_get_vpd_buf: VPD page 0x00 result 12 >
4 bytes
[    1.969160] sd 0:0:0:0: [sda] Write Protect is on
[    1.970184] sd 0:0:0:0: [sda] Mode Sense: 0f 00 80 00
[    1.970797] sd 0:0:0:0: [sda] Asking for cache data failed
[    1.971230] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    1.972270] sd 0:0:0:1: Attached scsi generic sg12 type 0
[    1.972511] sd 0:0:0:1: [sdm] 8388616 512-byte logical blocks: (4.29
GB/4.00 GiB)
[    1.972763] sd 0:0:0:0: [sda] 744728 512-byte logical blocks: (381
MB/364 MiB)
[    1.973379] sd 0:0:0:1: [sdm] 4096-byte physical blocks
[    1.973749] sd 0:0:0:1: [sdm] Write Protect is off
[    1.974745] sda: detected capacity change from 1 to 744728
[    1.974776] sd 0:0:0:1: [sdm] Mode Sense: 00 00 00 00
[    1.974781] scsi 0:2:1:0: Direct-Access
PQ: 0 ANSI: 0
[    1.974925] sd 0:2:1:0: Attached scsi generic sg13 type 0
[    1.977046] sd 0:2:1:0: [sdn] Test Unit Ready failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.978129] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.979617] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#30
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.979972] sd 0:0:0:1: [sdm] No Caching mode page found
[    1.981154] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#31
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.981172] sd 0:0:0:1: [sdm] Assuming drive cache: write through
[    1.982140] EXT4-fs (sda): VFS: Can't find ext4 filesystem
[    1.982953] scsi 0:7:0:0: Direct-Access
PQ: 0 ANSI: 0
[    1.982957] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#32
cmd 0x25 status: scsi 0x0 srb 0x20 hv 0xc0000001
[    1.983085] sd 0:2:1:0: [sdn] Read Capacity(10) failed: Result:
hostbyte=0x01 driverbyte=DRIVER_OK
[    1.983088] sd 0:2:1:0: [sdn] Sense not availThe connection with the
virtual machine or container was closed.






  parent reply	other threads:[~2023-04-05  0:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-04 18:32 [PATCH 6.1 000/179] 6.1.23-rc2 review Greg Kroah-Hartman
2023-04-04 22:25 ` Florian Fainelli
2023-04-05  0:35 ` Kelsey Steele [this message]
2023-04-05  9:30   ` Greg Kroah-Hartman
2023-04-05  9:41     ` Petr Tesarik
2023-04-05  9:46       ` Greg Kroah-Hartman
2023-04-05  2:45 ` Ron Economos
2023-04-05  4:13 ` Bagas Sanjaya
2023-04-05  6:02 ` Naresh Kamboju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230405003549.GA21326@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net \
    --to=kelseysteele@linux.microsoft.com \
    --cc=akpm@linux-foundation.org \
    --cc=decui@microsoft.com \
    --cc=dexuan.linux@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=iommu@lists.linux.dev \
    --cc=jonathanh@nvidia.com \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lkft-triage@lists.linaro.org \
    --cc=patches@kernelci.org \
    --cc=patches@lists.linux.dev \
    --cc=pavel@denx.de \
    --cc=petrtesarik@huaweicloud.com \
    --cc=robin.murphy@arm.com \
    --cc=rwarsow@gmx.de \
    --cc=shuah@kernel.org \
    --cc=srw@sladewatkins.net \
    --cc=stable@vger.kernel.org \
    --cc=sudipm.mukherjee@gmail.com \
    --cc=torvalds@linux-foundation.org \
    --cc=tyler.hicks@microsoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.