All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@kernel.org>
To: netdev@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Subject: pull-request: wireless-next-2023-04-05
Date: Wed,  5 Apr 2023 11:10:37 +0000 (UTC)	[thread overview]
Message-ID: <20230405111037.4792BC43443@smtp.kernel.org> (raw)

Hi,

here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.

Kalle

The following changes since commit aa2aa818cd1198cfa2498116d57cd9f13fea80e4:

  wifi: clean up erroneously introduced file (2023-03-30 22:50:12 +0200)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git tags/wireless-next-2023-04-05

for you to fetch changes up to cbef9a83c51dfcb07f77cfa6ac26f53a1ea86f49:

  wifi: rt2x00: Fix memory leak when handling surveys (2023-04-03 16:44:27 +0300)

----------------------------------------------------------------
wireless-next patches for v6.3

Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.

Note: We pulled wireless into wireless-next to fix a complicated
conflict in mac80211.

Major changes:

mac80211/cfg80211

* enable Wi-Fi 7 (EHT) mesh support

----------------------------------------------------------------
Armin Wolf (1):
      wifi: rt2x00: Fix memory leak when handling surveys

Cai Huoqing (2):
      wifi: rtw88: Remove redundant pci_clear_master
      wifi: rtw89: Remove redundant pci_clear_master

Chih-Kang Chang (3):
      wifi: rtw89: set data lowest rate according to AP supported rate
      wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering
      wifi: rtw89: config EDCCA threshold during scan to prevent TX failed

Chin-Yen Lee (1):
      wifi: rtw89: remove superfluous H2C of join_info

Ching-Te Ku (5):
      wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B
      wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving
      wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter
      wifi: rtw89: coex: Add report control v5 variation
      wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1

Christophe JAILLET (1):
      wifi: rsi: Slightly simplify rsi_set_channel()

Dan Carpenter (1):
      wifi: rndis_wlan: clean up a type issue

Felix Fietkau (6):
      wifi: mac80211: drop bogus static keywords in A-MSDU rx
      wifi: mac80211: fix potential null pointer dereference
      wifi: mac80211: fix receiving mesh packets in forwarding=0 networks
      wifi: mac80211: fix mesh forwarding
      wifi: mac80211: fix flow dissection for forwarded packets
      wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta

Gustavo A. R. Silva (2):
      wifi: rndis_wlan: Replace fake flex-array with flexible-array member
      wifi: rtlwifi: Replace fake flex-array with flex-array member

Jiapeng Chong (1):
      wifi: b43legacy: Remove the unused function prev_slot()

Johannes Berg (1):
      Merge wireless/main into wireless-next/main

Ping-Ke Shih (2):
      wifi: rtw89: add counters of register-based H2C/C2H
      wifi: rtw89: fix potential race condition between napi_init and napi_enable

Rob Herring (1):
      bcma: Use of_address_to_resource()

Ryder Lee (2):
      wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()
      wifi: mac80211: enable EHT mesh support

Tom Rix (7):
      wifi: ipw2x00: remove unused _ipw_read16 function
      wifi: rtw88: remove unused rtw_pci_get_tx_desc function
      wifi: b43legacy: remove unused freq_r3A_value function
      wifi: brcmsmac: remove unused has_5g variable
      wifi: brcmsmac: ampdu: remove unused suc_mpdu variable
      wifi: mwifiex: remove unused evt_buf variable
      bcma: remove unused mips_read32 function

Wei Chen (2):
      wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
      wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()

 drivers/bcma/driver_mips.c                         |   6 -
 drivers/bcma/main.c                                |  10 +-
 drivers/net/wireless/broadcom/b43legacy/dma.c      |   8 -
 drivers/net/wireless/broadcom/b43legacy/radio.c    |  17 --
 .../wireless/broadcom/brcm80211/brcmsmac/ampdu.c   |   3 +-
 .../broadcom/brcm80211/brcmsmac/mac80211_if.c      |   2 -
 drivers/net/wireless/intel/ipw2x00/ipw2200.c       |  13 --
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |  50 +++---
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h       |   6 +-
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c       |   6 +-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c       |  29 +++-
 drivers/net/wireless/legacy/rndis_wlan.c           |   8 +-
 drivers/net/wireless/marvell/mwifiex/11h.c         |   4 -
 drivers/net/wireless/marvell/mwifiex/pcie.c        |   2 +-
 drivers/net/wireless/marvell/mwifiex/sdio.c        |   2 +-
 drivers/net/wireless/mediatek/mt76/mac80211.c      |   8 +
 drivers/net/wireless/mediatek/mt76/mt76.h          |   1 +
 .../net/wireless/mediatek/mt76/mt76_connac_mcu.c   |   3 +
 drivers/net/wireless/mediatek/mt76/mt7915/init.c   |  40 +++--
 drivers/net/wireless/ralink/rt2x00/rt2x00dev.c     |   1 +
 drivers/net/wireless/realtek/rtlwifi/debug.c       |  12 +-
 drivers/net/wireless/realtek/rtlwifi/wifi.h        |   2 +-
 drivers/net/wireless/realtek/rtw88/pci.c           |   8 -
 drivers/net/wireless/realtek/rtw89/coex.c          | 171 ++++++++++++++++++++-
 drivers/net/wireless/realtek/rtw89/coex.h          |   1 +
 drivers/net/wireless/realtek/rtw89/core.c          |  57 +++++--
 drivers/net/wireless/realtek/rtw89/core.h          |  33 +++-
 drivers/net/wireless/realtek/rtw89/fw.c            |  11 ++
 drivers/net/wireless/realtek/rtw89/mac.c           |   2 +
 drivers/net/wireless/realtek/rtw89/pci.c           |  20 +--
 drivers/net/wireless/realtek/rtw89/phy.c           |  19 +++
 drivers/net/wireless/realtek/rtw89/phy.h           |   1 +
 drivers/net/wireless/realtek/rtw89/reg.h           |  10 ++
 drivers/net/wireless/realtek/rtw89/rtw8852a.c      |  14 +-
 drivers/net/wireless/realtek/rtw89/rtw8852b.c      |  54 ++++++-
 drivers/net/wireless/realtek/rtw89/rtw8852c.c      |  14 +-
 drivers/net/wireless/realtek/rtw89/wow.c           |   9 --
 drivers/net/wireless/rsi/rsi_91x_mgmt.c            |   7 +-
 net/mac80211/cfg.c                                 |  21 +--
 net/mac80211/ieee80211_i.h                         |   5 +
 net/mac80211/main.c                                |   2 +
 net/mac80211/mesh.c                                |  73 ++++++++-
 net/mac80211/mesh.h                                |   4 +
 net/mac80211/mesh_plink.c                          |  16 +-
 net/mac80211/rx.c                                  |  51 +++---
 net/mac80211/sta_info.c                            |   3 +-
 net/mac80211/util.c                                |  76 ++++++++-
 net/mac80211/wme.c                                 |   6 +-
 net/wireless/nl80211.c                             |  26 ++--
 49 files changed, 718 insertions(+), 229 deletions(-)

             reply	other threads:[~2023-04-05 11:10 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-05 11:10 Kalle Valo [this message]
2023-04-06  0:40 ` pull-request: wireless-next-2023-04-05 patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230405111037.4792BC43443@smtp.kernel.org \
    --to=kvalo@kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.