[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.15.84-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1613 SMP PREEMPT Thu Jan 5 12:03:08 GMT 2023 [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.000000] percpu: Embedded 28 pages/cpu s77336 r8192 d29160 u114688 [ 0.000000] pcpu-alloc: s77336 r8192 d29160 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2633f715-02 rootfstype=ext4 fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB) [ 0.000000] Memory: 7668384K/8245248K available (11520K kernel code, 1956K rwdata, 4136K rodata, 3776K init, 975K bss, 249184K reserved, 327680K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 38065 entries in 149 pages [ 0.000000] ftrace: allocated 149 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10) [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000355] Console: colour dummy device 80x25 [ 0.000966] printk: console [tty1] enabled [ 0.001048] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.001089] pid_max: default: 32768 minimum: 301 [ 0.001248] LSM: Security Framework initializing [ 0.001546] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001681] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003002] cgroup: Disabling memory control group subsystem [ 0.006038] rcu: Hierarchical SRCU implementation. [ 0.007234] EFI services will not be available. [ 0.007806] smp: Bringing up secondary CPUs ... [ 0.009038] Detected PIPT I-cache on CPU1 [ 0.009125] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.010352] Detected PIPT I-cache on CPU2 [ 0.010404] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.011592] Detected PIPT I-cache on CPU3 [ 0.011642] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.011796] smp: Brought up 1 node, 4 CPUs [ 0.011893] SMP: Total of 4 processors activated. [ 0.011963] CPU features: detected: 32-bit EL0 Support [ 0.011986] CPU features: detected: 32-bit EL1 Support [ 0.012010] CPU features: detected: CRC32 instructions [ 0.045452] CPU: All CPU(s) started at EL2 [ 0.045557] alternatives: patching kernel code [ 0.047483] devtmpfs: initialized [ 0.059212] Enabled cp15_barrier support [ 0.059287] Enabled setend support [ 0.059328] KASLR enabled [ 0.059550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.059602] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069809] pinctrl core: initialized pinctrl subsystem [ 0.070734] DMI not present or invalid. [ 0.071477] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.075331] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.075667] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.076633] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.076757] audit: initializing netlink subsys (disabled) [ 0.077092] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1 [ 0.077702] thermal_sys: Registered thermal governor 'step_wise' [ 0.077948] cpuidle: using governor menu [ 0.078275] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.078489] ASID allocator initialised with 32768 entries [ 0.078673] Serial: AMBA PL011 UART driver [ 0.091640] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.116400] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-01-05T10:46:54, variant start [ 0.120415] raspberrypi-firmware soc:firmware: Firmware hash is 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9 [ 0.173306] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.177690] vgaarb: loaded [ 0.178161] SCSI subsystem initialized [ 0.178406] usbcore: registered new interface driver usbfs [ 0.178475] usbcore: registered new interface driver hub [ 0.178555] usbcore: registered new device driver usb [ 0.178945] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.179178] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.179503] pps_core: LinuxPPS API ver. 1 registered [ 0.179527] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.179566] PTP clock support registered [ 0.181225] clocksource: Switched to clocksource arch_sys_counter [ 0.273823] VFS: Disk quotas dquot_6.6.0 [ 0.273976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.274169] FS-Cache: Loaded [ 0.274443] CacheFiles: Loaded [ 0.275842] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes [ 0.275880] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 [ 0.288079] Console: switching to colour frame buffer device 240x67 [ 0.299085] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered! [ 0.309941] NET: Registered PF_INET protocol family [ 0.311043] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.317271] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.317476] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.317589] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.318158] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.319322] TCP: Hash tables configured (established 65536 bind 65536) [ 0.319726] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.319964] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.320498] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.322192] RPC: Registered named UNIX socket transport module. [ 0.322286] RPC: Registered udp transport module. [ 0.322348] RPC: Registered tcp transport module. [ 0.322411] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.322500] PCI: CLS 0 bytes, default 64 [ 0.325077] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.325580] kvm [1]: IPA Size Limit: 44 bits [ 0.326840] kvm [1]: vgic interrupt IRQ9 [ 0.327166] kvm [1]: Hyp mode initialized successfully [ 1.165639] Initialise system trusted keyrings [ 1.166141] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.173319] zbud: loaded [ 1.175334] FS-Cache: Netfs 'nfs' registered for caching [ 1.176145] NFS: Registering the id_resolver key type [ 1.176245] Key type id_resolver registered [ 1.176304] Key type id_legacy registered [ 1.176468] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.176553] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.177919] Key type asymmetric registered [ 1.177987] Asymmetric key parser 'x509' registered [ 1.178129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.178482] io scheduler mq-deadline registered [ 1.178549] io scheduler kyber registered [ 1.187178] gpio-507 (ant1): hogged as output/high [ 1.191521] gpio-511 (ant2): hogged as output/low [ 1.193106] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.196194] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.199282] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.202337] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000 [ 1.239327] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.242607] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.245566] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.248544] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.251681] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.254957] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.261935] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 [ 1.265001] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.268294] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.274980] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.277979] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit] [ 1.280967] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.283928] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.286965] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 1.289902] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 6.292814] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801 [ 6.295779] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x8b0 took 4891439 usecs [ 6.311060] iproc-rng200 fe104000.rng: hwrng registered [ 6.314534] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 6.319013] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 6.335069] brd: module loaded [ 6.348156] loop: module loaded [ 6.351963] Loading iSCSI transport class v2.0-870. [ 6.360243] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 6.421392] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 6.425459] usbcore: registered new interface driver r8152 [ 6.428322] usbcore: registered new interface driver lan78xx [ 6.431160] usbcore: registered new interface driver smsc95xx [ 6.434470] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 6.437182] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 16.439927] xhci_hcd 0000:01:00.0: can't setup: -110 [ 16.442611] xhci_hcd 0000:01:00.0: USB bus 1 deregistered [ 16.445296] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110 [ 16.447938] xhci_hcd: probe of 0000:01:00.0 failed with error -110 [ 16.476657] xhci-hcd fe9c0000.xhci: xHCI Host Controller [ 16.479403] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 1 [ 16.482477] xhci-hcd fe9c0000.xhci: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010 [ 16.485318] xhci-hcd fe9c0000.xhci: irq 60, io mem 0xfe9c0000 [ 16.488253] xhci-hcd fe9c0000.xhci: xHCI Host Controller [ 16.490882] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 2 [ 16.493588] xhci-hcd fe9c0000.xhci: Host supports USB 3.0 SuperSpeed [ 16.496643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 16.499387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.502112] usb usb1: Product: xHCI Host Controller [ 16.504795] usb usb1: Manufacturer: Linux 5.15.84-v8+ xhci-hcd [ 16.507470] usb usb1: SerialNumber: fe9c0000.xhci [ 16.510874] hub 1-0:1.0: USB hub found [ 16.513639] hub 1-0:1.0: 1 port detected [ 16.516948] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 16.519964] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 16.522732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.525424] usb usb2: Product: xHCI Host Controller [ 16.528124] usb usb2: Manufacturer: Linux 5.15.84-v8+ xhci-hcd [ 16.530826] usb usb2: SerialNumber: fe9c0000.xhci [ 16.534135] hub 2-0:1.0: USB hub found [ 16.536843] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 16.540215] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 16.543346] dwc_otg: FIQ enabled [ 16.543358] dwc_otg: NAK holdoff enabled [ 16.543367] dwc_otg: FIQ split-transaction FSM enabled [ 16.543381] Module dwc_common_port init [ 16.543991] usbcore: registered new interface driver uas [ 16.546859] usbcore: registered new interface driver usb-storage [ 16.549814] mousedev: PS/2 mouse device common for all mice [ 16.557943] sdhci: Secure Digital Host Controller Interface driver [ 16.560691] sdhci: Copyright(c) Pierre Ossman [ 16.564066] sdhci-pltfm: SDHCI platform and OF driver helper [ 16.570498] ledtrig-cpu: registered to indicate activity on CPUs [ 16.573830] hid: raw HID events driver (C) Jiri Kosina [ 16.576692] usbcore: registered new interface driver usbhid [ 16.579387] usbhid: USB HID core driver [ 16.582406] ashmem: initialized [ 16.594310] NET: Registered PF_PACKET protocol family [ 16.597253] Key type dns_resolver registered [ 16.601363] registered taskstats version 1 [ 16.604033] Loading compiled-in X.509 certificates [ 16.607327] Key type .fscrypt registered [ 16.610011] Key type fscrypt-provisioning registered [ 16.624033] uart-pl011 fe201000.serial: there is not valid maps for state default [ 16.627121] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 16.629994] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2 [ 16.644203] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 16.647525] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 16.651495] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 16.654242] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 16.688803] of_cfs_init [ 16.691670] of_cfs_init: OK [ 16.722560] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 16.725724] Waiting for root device PARTUUID=2633f715-02... [ 16.769309] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 16.796903] mmc0: new DDR MMC card at address 0001 [ 16.800837] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 16.809033] mmcblk0: p1 p2 [ 16.812442] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 16.815836] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB [ 16.821551] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB [ 16.826723] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (242:0) [ 16.846435] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 16.849554] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 16.856110] devtmpfs: mounted [ 16.867885] Freeing unused kernel memory: 3776K [ 16.871018] Run /sbin/init as init process [ 16.873799] with arguments: [ 16.873812] /sbin/init [ 16.873824] with environment: [ 16.873834] HOME=/ [ 16.873844] TERM=linux [ 16.917625] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 16.920517] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 16.976801] hub 1-1:1.0: USB hub found [ 16.979955] hub 1-1:1.0: 4 ports detected [ 17.115025] systemd[1]: System time before build time, advancing clock. [ 17.281006] NET: Registered PF_INET6 protocol family [ 17.285955] Segment Routing with IPv6 [ 17.288759] In-situ OAM (IOAM) with IPv6 [ 17.347801] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 17.355107] systemd[1]: Detected architecture arm64. [ 17.372826] systemd[1]: Set hostname to . [ 18.007461] systemd[1]: Queued start job for default target Multi-User System. [ 18.015245] systemd[1]: Created slice system-getty.slice. [ 18.023361] systemd[1]: Created slice system-modprobe.slice. [ 18.031070] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 18.038628] systemd[1]: Created slice User and Session Slice. [ 18.045695] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 18.052794] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 18.060646] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 18.067819] systemd[1]: Reached target Local Encrypted Volumes. [ 18.074931] systemd[1]: Reached target Paths. [ 18.081989] systemd[1]: Reached target Slices. [ 18.088999] systemd[1]: Reached target Swap. [ 18.098874] systemd[1]: Listening on Syslog Socket. [ 18.107183] systemd[1]: Listening on fsck to fsckd communication Socket. [ 18.114639] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 18.123004] systemd[1]: Listening on Journal Audit Socket. [ 18.130947] systemd[1]: Listening on Journal Socket (/dev/log). [ 18.139130] systemd[1]: Listening on Journal Socket. [ 18.150293] systemd[1]: Listening on udev Control Socket. [ 18.158768] systemd[1]: Listening on udev Kernel Socket. [ 18.167005] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 18.174867] systemd[1]: Mounting POSIX Message Queue File System... [ 18.188259] systemd[1]: Mounting RPC Pipe File System... [ 18.203433] systemd[1]: Mounting Kernel Debug File System... [ 18.216228] systemd[1]: Mounting Kernel Trace File System... [ 18.224478] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 18.233963] systemd[1]: Starting Restore / save the current clock... [ 18.247761] systemd[1]: Starting Set the console keyboard layout... [ 18.263157] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 18.277612] systemd[1]: Starting Load Kernel Module configfs... [ 18.292076] systemd[1]: Starting Load Kernel Module drm... [ 18.310158] systemd[1]: Starting Load Kernel Module fuse... [ 18.322455] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 18.332214] systemd[1]: Starting File System Check on Root Device... [ 18.351258] systemd[1]: Starting Journal Service... [ 18.366322] fuse: init (API version 7.34) [ 18.370518] systemd[1]: Starting Load Kernel Modules... [ 18.386246] systemd[1]: Starting Coldplug All udev Devices... [ 18.429542] systemd[1]: Mounted POSIX Message Queue File System. [ 18.445993] systemd[1]: Mounted RPC Pipe File System. [ 18.472913] systemd[1]: Mounted Kernel Debug File System. [ 18.480740] systemd[1]: Mounted Kernel Trace File System. [ 18.495347] systemd[1]: Finished Restore / save the current clock. [ 18.526563] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 18.537341] systemd[1]: modprobe@configfs.service: Succeeded. [ 18.542775] systemd[1]: Finished Load Kernel Module configfs. [ 18.552696] systemd[1]: modprobe@drm.service: Succeeded. [ 18.558659] systemd[1]: Finished Load Kernel Module drm. [ 18.568541] systemd[1]: modprobe@fuse.service: Succeeded. [ 18.573880] systemd[1]: Finished Load Kernel Module fuse. [ 18.583801] systemd[1]: Finished File System Check on Root Device. [ 18.594209] systemd[1]: Finished Load Kernel Modules. [ 18.614455] systemd[1]: Mounting FUSE Control File System... [ 18.627736] systemd[1]: Mounting Kernel Configuration File System... [ 18.642651] systemd[1]: Started File System Check Daemon to report status. [ 18.665986] systemd[1]: Starting Remount Root and Kernel File Systems... [ 18.678575] systemd[1]: Starting Apply Kernel Variables... [ 18.693594] systemd[1]: Mounted FUSE Control File System. [ 18.717867] systemd[1]: Mounted Kernel Configuration File System. [ 18.737925] systemd[1]: Started Journal Service. [ 18.843553] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 18.900078] systemd-journald[146]: Received client request to flush runtime journal. [ 18.908223] systemd-journald[146]: File /var/log/journal/5c71b33d54d54b56a83192f2a7dd0c26/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 19.868410] mc: Linux media interface: v0.10 [ 20.022952] videodev: Linux video capture interface: v2.00 [ 20.085706] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 20.116995] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 20.117044] [vc_sm_connected_init]: start [ 20.126068] [vc_sm_connected_init]: installed successfully [ 20.165594] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 20.178502] bcm2835_audio bcm2835_audio: there is not valid maps for state default [ 20.222178] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 20.231807] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 20.236649] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 20.237863] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 20.238268] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 20.251942] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 20.269008] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 20.270311] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 20.296440] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 20.333534] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 20.339814] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 20.371042] rpivid feb10000.codec: Device registered as /dev/video19 [ 20.383685] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 20.383742] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 20.383765] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 20.383784] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 20.383826] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 20.425869] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 20.426721] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 20.427593] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 20.427623] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 20.427682] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 20.435536] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 20.435595] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 20.435638] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 20.435657] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 20.435674] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 20.436031] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 20.555668] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 20.558412] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 20.572482] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 20.572563] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 20.609906] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 20.609978] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 20.617966] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 20.618066] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 20.700103] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 21.480722] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff) [ 21.480772] fb0: switching to vc4 from simple [ 21.490606] Console: switching to colour dummy device 80x25 [ 21.538621] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 21.541009] Registered IR keymap rc-cec [ 21.541283] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 21.541508] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 21.549809] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 21.560367] Registered IR keymap rc-cec [ 21.560599] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 21.560831] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1 [ 21.567421] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 21.567959] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 21.568349] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.568694] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.569042] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.569502] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.569876] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.586325] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 21.683816] Console: switching to colour frame buffer device 240x67 [ 21.712387] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 22.009917] 8021q: 802.1Q VLAN Support v1.8 [ 22.086183] uart-pl011 fe201000.serial: no DMA platform data [ 22.096980] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 22.360820] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.389520] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.397905] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 22.488754] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 22.490537] bcmgenet fd580000.ethernet eth0: Link is Down [ 26.589395] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 26.589433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready