All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: linux-stm32@st-md-mailman.stormreply.com
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 10/10] ARM: dts: stm32: add STM32MP1-based Phytec board
Date: Fri,  5 May 2023 08:01:58 +0200	[thread overview]
Message-ID: <20230505060158.16516-11-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20230505060158.16516-1-s.trumtrar@pengutronix.de>

Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
stm32m157c-som.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---

Notes:
    Changes since v7:
       - remove secure-status for sdmmc

 arch/arm/boot/dts/Makefile                    |  3 +-
 .../dts/stm32mp157c-phycore-stm32mp1-3.dts    | 60 +++++++++++++++++++
 2 files changed, 62 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846..dfa9a7477c82 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1252,7 +1252,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-ev1.dtb \
 	stm32mp157c-ev1-scmi.dtb \
 	stm32mp157c-lxa-mc1.dtb \
-	stm32mp157c-odyssey.dtb
+	stm32mp157c-odyssey.dtb \
+	stm32mp157c-phycore-stm32mp1-3.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
new file mode 100644
index 000000000000..28d7203264ce
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
+	compatible = "phytec,phycore-stm32mp1-3",
+		     "phytec,phycore-stm32mp157c-som", "st,stm32mp157";
+
+	aliases {
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		mmc2 = &sdmmc3;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &usart1;
+	};
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&fmc {
+	status = "disabled";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c4_eeprom {
+	status = "okay";
+};
+
+&i2c4_rtc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&sdmmc2 {
+	status = "okay";
+};
-- 
2.39.1


WARNING: multiple messages have this Message-ID (diff)
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: linux-stm32@st-md-mailman.stormreply.com
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 10/10] ARM: dts: stm32: add STM32MP1-based Phytec board
Date: Fri,  5 May 2023 08:01:58 +0200	[thread overview]
Message-ID: <20230505060158.16516-11-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20230505060158.16516-1-s.trumtrar@pengutronix.de>

Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
stm32m157c-som.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---

Notes:
    Changes since v7:
       - remove secure-status for sdmmc

 arch/arm/boot/dts/Makefile                    |  3 +-
 .../dts/stm32mp157c-phycore-stm32mp1-3.dts    | 60 +++++++++++++++++++
 2 files changed, 62 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846..dfa9a7477c82 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1252,7 +1252,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-ev1.dtb \
 	stm32mp157c-ev1-scmi.dtb \
 	stm32mp157c-lxa-mc1.dtb \
-	stm32mp157c-odyssey.dtb
+	stm32mp157c-odyssey.dtb \
+	stm32mp157c-phycore-stm32mp1-3.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
new file mode 100644
index 000000000000..28d7203264ce
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
+	compatible = "phytec,phycore-stm32mp1-3",
+		     "phytec,phycore-stm32mp157c-som", "st,stm32mp157";
+
+	aliases {
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		mmc2 = &sdmmc3;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &usart1;
+	};
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&fmc {
+	status = "disabled";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c4_eeprom {
+	status = "okay";
+};
+
+&i2c4_rtc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&sdmmc2 {
+	status = "okay";
+};
-- 
2.39.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-05-05  6:02 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-05  6:01 [PATCH v9 00/10] ARM: stm32: add support for Phycore STM32MP1 Steffen Trumtrar
2023-05-05  6:01 ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 01/10] ARM: dts: stm32: Add alternate pinmux for ethernet Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 02/10] ARM: dts: stm32: Add alternate pinmux for sai2b Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 03/10] ARM: dts: stm32: Add new pinmux for sdmmc1_b4 Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 04/10] ARM: dts: stm32: Add new pinmux for sdmmc2_d47 Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 05/10] ARM: dts: stm32: Add pinmux for USART1 pins Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 06/10] ARM: dts: stm32: Add idle/sleep pinmux for USART3 Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 07/10] ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 08/10] dt-bindings: arm: stm32: Add Phytec STM32MP1 board Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 09/10] ARM: dts: stm32: add STM32MP1-based Phytec SoM Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` Steffen Trumtrar [this message]
2023-05-05  6:01   ` [PATCH v9 10/10] ARM: dts: stm32: add STM32MP1-based Phytec board Steffen Trumtrar
2023-05-23 14:58   ` Christophe Parant
2023-05-23 14:58     ` Christophe Parant
2023-06-23  8:59     ` Christophe Parant
2023-06-23  8:59       ` Christophe Parant
2023-06-23 10:39       ` Alexandre TORGUE
2023-06-23 10:39         ` Alexandre TORGUE
2023-05-16 15:16 ` [PATCH v9 00/10] ARM: stm32: add support for Phycore STM32MP1 Alexandre TORGUE
2023-05-16 15:16   ` Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230505060158.16516-11-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=alexandre.torgue@foss.st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.