All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, Christoph Hellwig <hch@lst.de>,
	jyescas@google.com, mcgrof@kernel.org,
	Bart Van Assche <bvanassche@acm.org>,
	Ming Lei <ming.lei@redhat.com>,
	Damien Le Moal <damien.lemoal@opensource.wdc.com>,
	Chaitanya Kulkarni <kch@nvidia.com>,
	Johannes Thumshirn <johannes.thumshirn@wdc.com>,
	Vincent Fu <vincent.fu@samsung.com>,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	Akinobu Mita <akinobu.mita@gmail.com>,
	"Shin'ichiro Kawasaki" <shinichiro.kawasaki@wdc.com>
Subject: [PATCH v5 9/9] null_blk: Support configuring the maximum segment size
Date: Mon, 22 May 2023 15:25:41 -0700	[thread overview]
Message-ID: <20230522222554.525229-10-bvanassche@acm.org> (raw)
In-Reply-To: <20230522222554.525229-1-bvanassche@acm.org>

Add support for configuring the maximum segment size.

Add support for segments smaller than the page size.

This patch enables testing segments smaller than the page size with a
driver that does not call blk_rq_map_sg().

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/block/null_blk/main.c     | 19 ++++++++++++++++---
 drivers/block/null_blk/null_blk.h |  1 +
 2 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index b3fedafe301e..9c9098f1bd52 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -157,6 +157,10 @@ static int g_max_sectors;
 module_param_named(max_sectors, g_max_sectors, int, 0444);
 MODULE_PARM_DESC(max_sectors, "Maximum size of a command (in 512B sectors)");
 
+static unsigned int g_max_segment_size = BLK_MAX_SEGMENT_SIZE;
+module_param_named(max_segment_size, g_max_segment_size, int, 0444);
+MODULE_PARM_DESC(max_segment_size, "Maximum size of a segment in bytes");
+
 static unsigned int nr_devices = 1;
 module_param(nr_devices, uint, 0444);
 MODULE_PARM_DESC(nr_devices, "Number of devices to register");
@@ -409,6 +413,7 @@ NULLB_DEVICE_ATTR(home_node, uint, NULL);
 NULLB_DEVICE_ATTR(queue_mode, uint, NULL);
 NULLB_DEVICE_ATTR(blocksize, uint, NULL);
 NULLB_DEVICE_ATTR(max_sectors, uint, NULL);
+NULLB_DEVICE_ATTR(max_segment_size, uint, NULL);
 NULLB_DEVICE_ATTR(irqmode, uint, NULL);
 NULLB_DEVICE_ATTR(hw_queue_depth, uint, NULL);
 NULLB_DEVICE_ATTR(index, uint, NULL);
@@ -550,6 +555,7 @@ static struct configfs_attribute *nullb_device_attrs[] = {
 	&nullb_device_attr_queue_mode,
 	&nullb_device_attr_blocksize,
 	&nullb_device_attr_max_sectors,
+	&nullb_device_attr_max_segment_size,
 	&nullb_device_attr_irqmode,
 	&nullb_device_attr_hw_queue_depth,
 	&nullb_device_attr_index,
@@ -652,7 +658,8 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
 	return snprintf(page, PAGE_SIZE,
 			"badblocks,blocking,blocksize,cache_size,"
 			"completion_nsec,discard,home_node,hw_queue_depth,"
-			"irqmode,max_sectors,mbps,memory_backed,no_sched,"
+			"irqmode,max_sectors,max_segment_size,mbps,"
+			"memory_backed,no_sched,"
 			"poll_queues,power,queue_mode,shared_tag_bitmap,size,"
 			"submit_queues,use_per_node_hctx,virt_boundary,zoned,"
 			"zone_capacity,zone_max_active,zone_max_open,"
@@ -722,6 +729,7 @@ static struct nullb_device *null_alloc_dev(void)
 	dev->queue_mode = g_queue_mode;
 	dev->blocksize = g_bs;
 	dev->max_sectors = g_max_sectors;
+	dev->max_segment_size = g_max_segment_size;
 	dev->irqmode = g_irqmode;
 	dev->hw_queue_depth = g_hw_queue_depth;
 	dev->blocking = g_blocking;
@@ -1248,6 +1256,8 @@ static int null_transfer(struct nullb *nullb, struct page *page,
 	unsigned int valid_len = len;
 	int err = 0;
 
+	WARN_ONCE(len > dev->max_segment_size, "%u > %u\n", len,
+		  dev->max_segment_size);
 	if (!is_write) {
 		if (dev->zoned)
 			valid_len = null_zone_valid_read_len(nullb,
@@ -1283,7 +1293,8 @@ static int null_handle_rq(struct nullb_cmd *cmd)
 
 	spin_lock_irq(&nullb->lock);
 	rq_for_each_segment(bvec, rq, iter) {
-		len = bvec.bv_len;
+		len = min(bvec.bv_len, nullb->dev->max_segment_size);
+		bvec.bv_len = len;
 		err = null_transfer(nullb, bvec.bv_page, len, bvec.bv_offset,
 				     op_is_write(req_op(rq)), sector,
 				     rq->cmd_flags & REQ_FUA);
@@ -1310,7 +1321,8 @@ static int null_handle_bio(struct nullb_cmd *cmd)
 
 	spin_lock_irq(&nullb->lock);
 	bio_for_each_segment(bvec, bio, iter) {
-		len = bvec.bv_len;
+		len = min(bvec.bv_len, nullb->dev->max_segment_size);
+		bvec.bv_len = len;
 		err = null_transfer(nullb, bvec.bv_page, len, bvec.bv_offset,
 				     op_is_write(bio_op(bio)), sector,
 				     bio->bi_opf & REQ_FUA);
@@ -2161,6 +2173,7 @@ static int null_add_dev(struct nullb_device *dev)
 		dev->max_sectors = queue_max_hw_sectors(nullb->q);
 	dev->max_sectors = min(dev->max_sectors, BLK_DEF_MAX_SECTORS);
 	blk_queue_max_hw_sectors(nullb->q, dev->max_sectors);
+	blk_queue_max_segment_size(nullb->q, dev->max_segment_size);
 
 	if (dev->virt_boundary)
 		blk_queue_virt_boundary(nullb->q, PAGE_SIZE - 1);
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index 929f659dd255..7bf80b0035f5 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -107,6 +107,7 @@ struct nullb_device {
 	unsigned int queue_mode; /* block interface */
 	unsigned int blocksize; /* block size */
 	unsigned int max_sectors; /* Max sectors per command */
+	unsigned int max_segment_size; /* Max size of a single DMA segment. */
 	unsigned int irqmode; /* IRQ completion handler */
 	unsigned int hw_queue_depth; /* queue depth */
 	unsigned int index; /* index of the disk, only valid with a disk */

  parent reply	other threads:[~2023-05-22 22:26 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-22 22:25 [PATCH v5 0/9] Support limits below the page size Bart Van Assche
2023-05-22 22:25 ` [PATCH v5 1/9] block: Use pr_info() instead of printk(KERN_INFO ...) Bart Van Assche
2023-05-22 23:10   ` Luis Chamberlain
2023-05-27 16:09     ` Bart Van Assche
2023-05-22 22:25 ` [PATCH v5 2/9] block: Prepare for supporting sub-page limits Bart Van Assche
2023-05-22 23:26   ` Luis Chamberlain
2023-05-22 22:25 ` [PATCH v5 3/9] block: Support configuring limits below the page size Bart Van Assche
2023-05-27  3:16   ` Luis Chamberlain
2023-05-27 16:20     ` Bart Van Assche
2023-05-28 20:33       ` Luis Chamberlain
2023-05-28 22:32         ` Bart Van Assche
2023-05-31  5:40           ` Luis Chamberlain
2023-05-22 22:25 ` [PATCH v5 4/9] block: Make sub_page_limit_queues available in debugfs Bart Van Assche
2023-05-27  3:17   ` Luis Chamberlain
2023-05-22 22:25 ` [PATCH v5 5/9] block: Support submitting passthrough requests with small segments Bart Van Assche
2023-05-22 22:25 ` [PATCH v5 6/9] block: Add support for filesystem requests and " Bart Van Assche
2023-05-22 22:25 ` [PATCH v5 7/9] block: Add support for small segments in blk_rq_map_user_iov() Bart Van Assche
2023-05-22 22:25 ` [PATCH v5 8/9] scsi_debug: Support configuring the maximum segment size Bart Van Assche
2023-05-24 20:50   ` Douglas Gilbert
2023-05-22 22:25 ` Bart Van Assche [this message]
2023-06-09 17:14 ` [PATCH v5 0/9] Support limits below the page size Sandeep Dhavale
2023-06-12 18:15   ` Bart Van Assche
2023-06-12 18:34     ` Sandeep Dhavale

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230522222554.525229-10-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=akinobu.mita@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=damien.lemoal@opensource.wdc.com \
    --cc=hch@lst.de \
    --cc=johannes.thumshirn@wdc.com \
    --cc=jyescas@google.com \
    --cc=kch@nvidia.com \
    --cc=linux-block@vger.kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=ming.lei@redhat.com \
    --cc=shinichiro.kawasaki@wdc.com \
    --cc=vincent.fu@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.