From: Thierry Reding <thierry.reding@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Jon Hunter <jonathanh@nvidia.com>,
Prathamesh Shete <pshete@nvidia.com>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org
Subject: [PATCH v3 0/3] pinctrl: tegra: Add Tegra234 pinmux driver
Date: Tue, 30 May 2023 15:36:51 +0200 [thread overview]
Message-ID: <20230530133654.1296480-1-thierry.reding@gmail.com> (raw)
From: Thierry Reding <treding@nvidia.com>
Hi,
this is an updated version of Prathamesh's v2 of the series, which can
be found here:
https://patchwork.ozlabs.org/project/linux-tegra/list/?series=345256
The most prominent change is the split of the device tree bindings into
multiple files to make them more readable, as agreed upon with Krzysztof
during review.
Changes in v3:
- split up device tree bindings into multiple files for better
readability
- do not permit underscore in pinmux node names
- use correct #address-cells and #size-cells for DT nodes
- fixup a typo in the gpio-ranges property name
Note that the driver patch applies on top of the function table fix that
I sent out earlier:
http://patchwork.ozlabs.org/project/linux-tegra/list/?series=357206
Once accepted, patches 1 and 2 can go through the pinctrl tree and I can
pick up patch 3 into the Tegra tree. Alternatively I can also pick up
patch 1 into the Tegra tree to help with validation. We're not quite at
a point yet where the Tegra DTs fully validate, so it doesn't matter
much which way these get applied.
Thanks,
Thierry
Prathamesh Shete (3):
dt-bindings: pinctrl: Document Tegra234 pin controllers
pinctrl: tegra: Add Tegra234 pinmux driver
arm64: tegra: Add Tegra234 pin controllers
.../pinctrl/nvidia,tegra234-pinmux-aon.yaml | 61 +
.../nvidia,tegra234-pinmux-common.yaml | 65 +
.../pinctrl/nvidia,tegra234-pinmux.yaml | 141 ++
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 12 +
drivers/pinctrl/tegra/Kconfig | 4 +
drivers/pinctrl/tegra/Makefile | 1 +
drivers/pinctrl/tegra/pinctrl-tegra234.c | 1969 +++++++++++++++++
drivers/soc/tegra/Kconfig | 1 +
8 files changed, 2254 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
create mode 100644 drivers/pinctrl/tegra/pinctrl-tegra234.c
--
2.40.1
next reply other threads:[~2023-05-30 13:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 13:36 Thierry Reding [this message]
2023-05-30 13:36 ` [PATCH v3 1/3] dt-bindings: pinctrl: Document Tegra234 pin controllers Thierry Reding
2023-05-31 8:45 ` Krzysztof Kozlowski
2023-06-01 9:25 ` Thierry Reding
2023-05-30 13:36 ` [PATCH v3 2/3] pinctrl: tegra: Add Tegra234 pinmux driver Thierry Reding
2023-06-02 1:30 ` andy.shevchenko
2023-05-30 13:36 ` [PATCH v3 3/3] arm64: tegra: Add Tegra234 pin controllers Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530133654.1296480-1-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pshete@nvidia.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.