All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: "Mario Limonciello" <mario.limonciello@amd.com>,
	"Rafael Ávila de Espíndola" <rafael@espindo.la>
Subject: [PATCH 1/2] drm/amd: Disallow s0ix without BIOS support again
Date: Tue, 30 May 2023 12:53:00 -0500	[thread overview]
Message-ID: <20230530175301.231070-1-mario.limonciello@amd.com> (raw)

commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") showed
improvements to power consumption over suspend when s0ix wasn't enabled in
BIOS and the system didn't support S3.

This patch however was misguided because the reason the system didn't
support S3 was because SMT was disabled in OEM BIOS setup.
This prevented the BIOS from allowing S3.

Also allowing GPUs to use the s2idle path actually causes problems if
they're invoked on systems that may not support s2idle in the platform
firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails
for any reason, which could lead to unexpected flows.

To make this the behavior discoverable and expected, revert commit
cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") and offer
a message if SMT appears to be disabled.

Cc: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
index 3a6b2e2089f6..a3523d03d769 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
@@ -28,6 +28,7 @@
 #include <linux/xarray.h>
 #include <linux/power_supply.h>
 #include <linux/pm_runtime.h>
+#include <linux/sched/smt.h>
 #include <linux/suspend.h>
 #include <acpi/video.h>
 #include <acpi/actbl.h>
@@ -1473,6 +1474,13 @@ void amdgpu_acpi_release(void)
  */
 bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev)
 {
+#ifdef CONFIG_X86
+	if (!sched_smt_active()) {
+		dev_warn_once(adev->dev,
+			      "SMT is disabled by the BIOS.\n"
+			      "To use suspend-to-ram enable SMT in BIOS setup.\n");
+	}
+#endif
 	return !(adev->flags & AMD_IS_APU) ||
 		(pm_suspend_target_state == PM_SUSPEND_MEM);
 }
@@ -1499,16 +1507,20 @@ bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev)
 	 * S0ix even though the system is suspending to idle, so return false
 	 * in that case.
 	 */
-	if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)) {
 		dev_warn_once(adev->dev,
 			      "Power consumption will be higher as BIOS has not been configured for suspend-to-idle.\n"
 			      "To use suspend-to-idle change the sleep mode in BIOS setup.\n");
+		return false;
+	}
 
 #if !IS_ENABLED(CONFIG_AMD_PMC)
 	dev_warn_once(adev->dev,
 		      "Power consumption will be higher as the kernel has not been compiled with CONFIG_AMD_PMC.\n");
-#endif /* CONFIG_AMD_PMC */
+	return false;
+#else
 	return true;
+#endif /* CONFIG_AMD_PMC */
 }
 
 #endif /* CONFIG_SUSPEND */
-- 
2.34.1


             reply	other threads:[~2023-05-30 17:53 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-30 17:53 Mario Limonciello [this message]
2023-05-30 17:53 ` [PATCH 2/2] drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path Mario Limonciello
2023-05-30 18:15 ` [PATCH 1/2] drm/amd: Disallow s0ix without BIOS support again Alex Deucher
2023-05-30 18:19   ` Limonciello, Mario
2023-05-30 18:30     ` Rafael Ávila de Espíndola
2023-05-30 18:37       ` Limonciello, Mario
2023-05-30 18:53         ` Limonciello, Mario
2023-05-30 21:34     ` Alex Deucher
2023-05-30 22:04       ` Limonciello, Mario

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230530175301.231070-1-mario.limonciello@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=rafael@espindo.la \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.