[PATCH RFC 5/7] arm64: dts: qcom: sm8550: add ports subnodes in usb/dp qmpphy node

From: Neil Armstrong <neil.armstrong@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH RFC 5/7] arm64: dts: qcom: sm8550: add ports subnodes in usb/dp qmpphy node
Date: Thu, 01 Jun 2023 16:07:05 +0200	[thread overview]
Message-ID: <20230601-topic-sm8550-upstream-type-c-v1-5-d4d97b4d8bab@linaro.org> (raw)
In-Reply-To: <20230601-topic-sm8550-upstream-type-c-v1-0-d4d97b4d8bab@linaro.org>

Add the USB3+DP Combo QMP PHY port subnodes in the SM8550 SoC DTSI
to avoid duplication in the devices DTs.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index b41b3981b3ce..ca2280041f83 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2838,6 +2838,32 @@ usb_dp_qmpphy: phy@88e8000 {
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_1: usb@a6f8800 {

-- 
2.34.1

