From: Sergey Kambalin <serg.oker@gmail.com>
To: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org, Sergey Kambalin <sergey.kambalin@auriga.com>
Subject: [PATCH] Use named constants in BCM props
Date: Fri, 2 Jun 2023 12:30:02 +0300 [thread overview]
Message-ID: <20230602093002.117073-1-sergey.kambalin@auriga.com> (raw)
- PI_FIRMWARE_*_RATE constsnts were moved to raspberrypi-fw-defs.h
(seems more suitable place for them)
- inclusion of "qemu/osdep.h" has been removed
- year in copyright header has been updated
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/misc/bcm2835_property.c | 120 ++++++++++---------
include/hw/arm/raspi_platform.h | 6 +
include/hw/misc/raspberrypi-fw-defs.h | 163 ++++++++++++++++++++++++++
3 files changed, 236 insertions(+), 53 deletions(-)
create mode 100644 include/hw/misc/raspberrypi-fw-defs.h
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index 251b3d865d..871f71fdcd 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -12,10 +12,12 @@
#include "migration/vmstate.h"
#include "hw/irq.h"
#include "hw/misc/bcm2835_mbox_defs.h"
+#include "hw/misc/raspberrypi-fw-defs.h"
#include "sysemu/dma.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "trace.h"
+#include "hw/arm/raspi_platform.h"
/* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
@@ -51,48 +53,48 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
/* @(value + 8) : Request/response indicator */
resplen = 0;
switch (tag) {
- case 0x00000000: /* End tag */
+ case RPI_FWREQ_PROPERTY_END: /* End tag */
break;
- case 0x00000001: /* Get firmware revision */
+ case RPI_FWREQ_GET_FIRMWARE_REVISION: /* Get firmware revision */
stl_le_phys(&s->dma_as, value + 12, 346337);
resplen = 4;
break;
- case 0x00010001: /* Get board model */
+ case RPI_FWREQ_GET_BOARD_MODEL: /* Get board model */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x get board model NYI\n",
tag);
resplen = 4;
break;
- case 0x00010002: /* Get board revision */
+ case RPI_FWREQ_GET_BOARD_REVISION: /* Get board revision */
stl_le_phys(&s->dma_as, value + 12, s->board_rev);
resplen = 4;
break;
- case 0x00010003: /* Get board MAC address */
+ case RPI_FWREQ_GET_BOARD_MAC_ADDRESS: /* Get board MAC address */
resplen = sizeof(s->macaddr.a);
dma_memory_write(&s->dma_as, value + 12, s->macaddr.a, resplen,
MEMTXATTRS_UNSPECIFIED);
break;
- case 0x00010004: /* Get board serial */
+ case RPI_FWREQ_GET_BOARD_SERIAL: /* Get board serial */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x get board serial NYI\n",
tag);
resplen = 8;
break;
- case 0x00010005: /* Get ARM memory */
+ case RPI_FWREQ_GET_ARM_MEMORY: /* Get ARM memory */
/* base */
stl_le_phys(&s->dma_as, value + 12, 0);
/* size */
stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_base);
resplen = 8;
break;
- case 0x00010006: /* Get VC memory */
+ case RPI_FWREQ_GET_VC_MEMORY: /* Get VC memory */
/* base */
stl_le_phys(&s->dma_as, value + 12, s->fbdev->vcram_base);
/* size */
stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_size);
resplen = 8;
break;
- case 0x00028001: /* Set power state */
+ case RPI_FWREQ_SET_POWER_STATE: /* Set power state */
/* Assume that whatever device they asked for exists,
* and we'll just claim we set it to the desired state
*/
@@ -103,38 +105,42 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
/* Clocks */
- case 0x00030001: /* Get clock state */
+ case RPI_FWREQ_GET_CLOCK_STATE: /* Get clock state */
stl_le_phys(&s->dma_as, value + 16, 0x1);
resplen = 8;
break;
- case 0x00038001: /* Set clock state */
+ case RPI_FWREQ_SET_CLOCK_STATE: /* Set clock state */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x set clock state NYI\n",
tag);
resplen = 8;
break;
- case 0x00030002: /* Get clock rate */
- case 0x00030004: /* Get max clock rate */
- case 0x00030007: /* Get min clock rate */
+ case RPI_FWREQ_GET_CLOCK_RATE: /* Get clock rate */
+ case RPI_FWREQ_GET_MAX_CLOCK_RATE: /* Get max clock rate */
+ case RPI_FWREQ_GET_MIN_CLOCK_RATE: /* Get min clock rate */
switch (ldl_le_phys(&s->dma_as, value + 12)) {
- case 1: /* EMMC */
- stl_le_phys(&s->dma_as, value + 16, 50000000);
+ case RPI_FIRMWARE_EMMC_CLK_ID: /* EMMC */
+ stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_EMMC_CLK_RATE);
break;
- case 2: /* UART */
- stl_le_phys(&s->dma_as, value + 16, 3000000);
+ case RPI_FIRMWARE_UART_CLK_ID: /* UART */
+ stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_UART_CLK_RATE);
+ break;
+ case RPI_FIRMWARE_CORE_CLK_ID: /* Core Clock */
+ stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_CORE_CLK_RATE);
break;
default:
- stl_le_phys(&s->dma_as, value + 16, 700000000);
+ stl_le_phys(&s->dma_as, value + 16,
+ RPI_FIRMWARE_DEFAULT_CLK_RATE);
break;
}
resplen = 8;
break;
- case 0x00038002: /* Set clock rate */
- case 0x00038004: /* Set max clock rate */
- case 0x00038007: /* Set min clock rate */
+ case RPI_FWREQ_SET_CLOCK_RATE: /* Set clock rate */
+ case RPI_FWREQ_SET_MAX_CLOCK_RATE: /* Set max clock rate */
+ case RPI_FWREQ_SET_MIN_CLOCK_RATE: /* Set min clock rate */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x set clock rate NYI\n",
tag);
@@ -143,121 +149,128 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
/* Temperature */
- case 0x00030006: /* Get temperature */
+ case RPI_FWREQ_GET_TEMPERATURE: /* Get temperature */
stl_le_phys(&s->dma_as, value + 16, 25000);
resplen = 8;
break;
- case 0x0003000A: /* Get max temperature */
+ case RPI_FWREQ_GET_MAX_TEMPERATURE: /* Get max temperature */
stl_le_phys(&s->dma_as, value + 16, 99000);
resplen = 8;
break;
/* Frame buffer */
- case 0x00040001: /* Allocate buffer */
+ case RPI_FWREQ_FRAMEBUFFER_ALLOCATE: /* Allocate buffer */
stl_le_phys(&s->dma_as, value + 12, fbconfig.base);
stl_le_phys(&s->dma_as, value + 16,
bcm2835_fb_get_size(&fbconfig));
resplen = 8;
break;
- case 0x00048001: /* Release buffer */
+ case RPI_FWREQ_FRAMEBUFFER_RELEASE: /* Release buffer */
resplen = 0;
break;
- case 0x00040002: /* Blank screen */
+ case RPI_FWREQ_FRAMEBUFFER_BLANK: /* Blank screen */
resplen = 4;
break;
- case 0x00044003: /* Test physical display width/height */
- case 0x00044004: /* Test virtual display width/height */
+ /* Test physical display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT:
+ /* Test virtual display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT:
resplen = 8;
break;
- case 0x00048003: /* Set physical display width/height */
+ /* Set physical display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT:
fbconfig.xres = ldl_le_phys(&s->dma_as, value + 12);
fbconfig.yres = ldl_le_phys(&s->dma_as, value + 16);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040003: /* Get physical display width/height */
+ /* Get physical display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT:
stl_le_phys(&s->dma_as, value + 12, fbconfig.xres);
stl_le_phys(&s->dma_as, value + 16, fbconfig.yres);
resplen = 8;
break;
- case 0x00048004: /* Set virtual display width/height */
+ /* Set virtual display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT:
fbconfig.xres_virtual = ldl_le_phys(&s->dma_as, value + 12);
fbconfig.yres_virtual = ldl_le_phys(&s->dma_as, value + 16);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040004: /* Get virtual display width/height */
+ /* Get virtual display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT:
stl_le_phys(&s->dma_as, value + 12, fbconfig.xres_virtual);
stl_le_phys(&s->dma_as, value + 16, fbconfig.yres_virtual);
resplen = 8;
break;
- case 0x00044005: /* Test depth */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH: /* Test depth */
resplen = 4;
break;
- case 0x00048005: /* Set depth */
+ case RPI_FWREQ_FRAMEBUFFER_SET_DEPTH: /* Set depth */
fbconfig.bpp = ldl_le_phys(&s->dma_as, value + 12);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040005: /* Get depth */
+ case RPI_FWREQ_FRAMEBUFFER_GET_DEPTH: /* Get depth */
stl_le_phys(&s->dma_as, value + 12, fbconfig.bpp);
resplen = 4;
break;
- case 0x00044006: /* Test pixel order */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER: /* Test pixel order */
resplen = 4;
break;
- case 0x00048006: /* Set pixel order */
+ case RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER: /* Set pixel order */
fbconfig.pixo = ldl_le_phys(&s->dma_as, value + 12);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040006: /* Get pixel order */
+ case RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER: /* Get pixel order */
stl_le_phys(&s->dma_as, value + 12, fbconfig.pixo);
resplen = 4;
break;
- case 0x00044007: /* Test pixel alpha */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE: /* Test pixel alpha */
resplen = 4;
break;
- case 0x00048007: /* Set alpha */
+ case RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE: /* Set alpha */
fbconfig.alpha = ldl_le_phys(&s->dma_as, value + 12);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040007: /* Get alpha */
+ case RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE: /* Get alpha */
stl_le_phys(&s->dma_as, value + 12, fbconfig.alpha);
resplen = 4;
break;
- case 0x00040008: /* Get pitch */
+ case RPI_FWREQ_FRAMEBUFFER_GET_PITCH: /* Get pitch */
stl_le_phys(&s->dma_as, value + 12,
bcm2835_fb_get_pitch(&fbconfig));
resplen = 4;
break;
- case 0x00044009: /* Test virtual offset */
+ /* Test virtual offset */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET:
resplen = 8;
break;
- case 0x00048009: /* Set virtual offset */
+ case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET: /* Set virtual offset */
fbconfig.xoffset = ldl_le_phys(&s->dma_as, value + 12);
fbconfig.yoffset = ldl_le_phys(&s->dma_as, value + 16);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040009: /* Get virtual offset */
+ case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET: /* Get virtual offset */
stl_le_phys(&s->dma_as, value + 12, fbconfig.xoffset);
stl_le_phys(&s->dma_as, value + 16, fbconfig.yoffset);
resplen = 8;
break;
- case 0x0004000a: /* Get/Test/Set overscan */
- case 0x0004400a:
- case 0x0004800a:
+ case RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN: /* Get/Test/Set overscan */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN:
+ case RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN:
stl_le_phys(&s->dma_as, value + 12, 0);
stl_le_phys(&s->dma_as, value + 16, 0);
stl_le_phys(&s->dma_as, value + 20, 0);
stl_le_phys(&s->dma_as, value + 24, 0);
resplen = 16;
break;
- case 0x0004800b: /* Set palette */
+ case RPI_FWREQ_FRAMEBUFFER_SET_PALETTE: /* Set palette */
offset = ldl_le_phys(&s->dma_as, value + 12);
length = ldl_le_phys(&s->dma_as, value + 16);
n = 0;
@@ -270,18 +283,19 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
stl_le_phys(&s->dma_as, value + 12, 0);
resplen = 4;
break;
- case 0x00040013: /* Get number of displays */
+ /* Get number of displays */
+ case RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS:
stl_le_phys(&s->dma_as, value + 12, 1);
resplen = 4;
break;
- case 0x00060001: /* Get DMA channels */
+ case RPI_FWREQ_GET_DMA_CHANNELS: /* Get DMA channels */
/* channels 2-5 */
stl_le_phys(&s->dma_as, value + 12, 0x003C);
resplen = 4;
break;
- case 0x00050001: /* Get command line */
+ case RPI_FWREQ_GET_COMMAND_LINE: /* Get command line */
/*
* We follow the firmware behaviour: no NUL terminator is
* written to the buffer, and if the buffer is too short
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 4a56dd4b89..92a317950a 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -170,4 +170,10 @@
#define INTERRUPT_ILLEGAL_TYPE0 6
#define INTERRUPT_ILLEGAL_TYPE1 7
+/* Clock rates */
+#define RPI_FIRMWARE_EMMC_CLK_RATE 50000000
+#define RPI_FIRMWARE_UART_CLK_RATE 3000000
+#define RPI_FIRMWARE_CORE_CLK_RATE 350000000
+#define RPI_FIRMWARE_DEFAULT_CLK_RATE 700000000
+
#endif
diff --git a/include/hw/misc/raspberrypi-fw-defs.h b/include/hw/misc/raspberrypi-fw-defs.h
new file mode 100644
index 0000000000..4551fe7450
--- /dev/null
+++ b/include/hw/misc/raspberrypi-fw-defs.h
@@ -0,0 +1,163 @@
+/*
+ * Raspberry Pi firmware definitions
+ *
+ * Copyright (C) 2022 Auriga LLC, based on Linux kernel
+ * `include/soc/bcm2835/raspberrypi-firmware.h` (Copyright © 2015 Broadcom)
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_
+#define INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_
+
+#include "qemu/osdep.h"
+
+enum rpi_firmware_property_tag {
+ RPI_FWREQ_PROPERTY_END = 0,
+ RPI_FWREQ_GET_FIRMWARE_REVISION = 0x00000001,
+ RPI_FWREQ_GET_FIRMWARE_VARIANT = 0x00000002,
+ RPI_FWREQ_GET_FIRMWARE_HASH = 0x00000003,
+
+ RPI_FWREQ_SET_CURSOR_INFO = 0x00008010,
+ RPI_FWREQ_SET_CURSOR_STATE = 0x00008011,
+
+ RPI_FWREQ_GET_BOARD_MODEL = 0x00010001,
+ RPI_FWREQ_GET_BOARD_REVISION = 0x00010002,
+ RPI_FWREQ_GET_BOARD_MAC_ADDRESS = 0x00010003,
+ RPI_FWREQ_GET_BOARD_SERIAL = 0x00010004,
+ RPI_FWREQ_GET_ARM_MEMORY = 0x00010005,
+ RPI_FWREQ_GET_VC_MEMORY = 0x00010006,
+ RPI_FWREQ_GET_CLOCKS = 0x00010007,
+ RPI_FWREQ_GET_POWER_STATE = 0x00020001,
+ RPI_FWREQ_GET_TIMING = 0x00020002,
+ RPI_FWREQ_SET_POWER_STATE = 0x00028001,
+ RPI_FWREQ_GET_CLOCK_STATE = 0x00030001,
+ RPI_FWREQ_GET_CLOCK_RATE = 0x00030002,
+ RPI_FWREQ_GET_VOLTAGE = 0x00030003,
+ RPI_FWREQ_GET_MAX_CLOCK_RATE = 0x00030004,
+ RPI_FWREQ_GET_MAX_VOLTAGE = 0x00030005,
+ RPI_FWREQ_GET_TEMPERATURE = 0x00030006,
+ RPI_FWREQ_GET_MIN_CLOCK_RATE = 0x00030007,
+ RPI_FWREQ_GET_MIN_VOLTAGE = 0x00030008,
+ RPI_FWREQ_GET_TURBO = 0x00030009,
+ RPI_FWREQ_GET_MAX_TEMPERATURE = 0x0003000a,
+ RPI_FWREQ_GET_STC = 0x0003000b,
+ RPI_FWREQ_ALLOCATE_MEMORY = 0x0003000c,
+ RPI_FWREQ_LOCK_MEMORY = 0x0003000d,
+ RPI_FWREQ_UNLOCK_MEMORY = 0x0003000e,
+ RPI_FWREQ_RELEASE_MEMORY = 0x0003000f,
+ RPI_FWREQ_EXECUTE_CODE = 0x00030010,
+ RPI_FWREQ_EXECUTE_QPU = 0x00030011,
+ RPI_FWREQ_SET_ENABLE_QPU = 0x00030012,
+ RPI_FWREQ_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
+ RPI_FWREQ_GET_EDID_BLOCK = 0x00030020,
+ RPI_FWREQ_GET_CUSTOMER_OTP = 0x00030021,
+ RPI_FWREQ_GET_EDID_BLOCK_DISPLAY = 0x00030023,
+ RPI_FWREQ_GET_DOMAIN_STATE = 0x00030030,
+ RPI_FWREQ_GET_THROTTLED = 0x00030046,
+ RPI_FWREQ_GET_CLOCK_MEASURED = 0x00030047,
+ RPI_FWREQ_NOTIFY_REBOOT = 0x00030048,
+ RPI_FWREQ_SET_CLOCK_STATE = 0x00038001,
+ RPI_FWREQ_SET_CLOCK_RATE = 0x00038002,
+ RPI_FWREQ_SET_VOLTAGE = 0x00038003,
+ RPI_FWREQ_SET_MAX_CLOCK_RATE = 0x00038004,
+ RPI_FWREQ_SET_MIN_CLOCK_RATE = 0x00038007,
+ RPI_FWREQ_SET_TURBO = 0x00038009,
+ RPI_FWREQ_SET_CUSTOMER_OTP = 0x00038021,
+ RPI_FWREQ_SET_DOMAIN_STATE = 0x00038030,
+ RPI_FWREQ_GET_GPIO_STATE = 0x00030041,
+ RPI_FWREQ_SET_GPIO_STATE = 0x00038041,
+ RPI_FWREQ_SET_SDHOST_CLOCK = 0x00038042,
+ RPI_FWREQ_GET_GPIO_CONFIG = 0x00030043,
+ RPI_FWREQ_SET_GPIO_CONFIG = 0x00038043,
+ RPI_FWREQ_GET_PERIPH_REG = 0x00030045,
+ RPI_FWREQ_SET_PERIPH_REG = 0x00038045,
+ RPI_FWREQ_GET_POE_HAT_VAL = 0x00030049,
+ RPI_FWREQ_SET_POE_HAT_VAL = 0x00038049,
+ RPI_FWREQ_SET_POE_HAT_VAL_OLD = 0x00030050,
+ RPI_FWREQ_NOTIFY_XHCI_RESET = 0x00030058,
+ RPI_FWREQ_GET_REBOOT_FLAGS = 0x00030064,
+ RPI_FWREQ_SET_REBOOT_FLAGS = 0x00038064,
+ RPI_FWREQ_NOTIFY_DISPLAY_DONE = 0x00030066,
+
+ /* Dispmanx TAGS */
+ RPI_FWREQ_FRAMEBUFFER_ALLOCATE = 0x00040001,
+ RPI_FWREQ_FRAMEBUFFER_BLANK = 0x00040002,
+ RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT = 0x00040003,
+ RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT = 0x00040004,
+ RPI_FWREQ_FRAMEBUFFER_GET_DEPTH = 0x00040005,
+ RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER = 0x00040006,
+ RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE = 0x00040007,
+ RPI_FWREQ_FRAMEBUFFER_GET_PITCH = 0x00040008,
+ RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009,
+ RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a,
+ RPI_FWREQ_FRAMEBUFFER_GET_PALETTE = 0x0004000b,
+ RPI_FWREQ_FRAMEBUFFER_GET_LAYER = 0x0004000c,
+ RPI_FWREQ_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d,
+ RPI_FWREQ_FRAMEBUFFER_GET_VSYNC = 0x0004000e,
+ RPI_FWREQ_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f,
+ RPI_FWREQ_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010,
+ RPI_FWREQ_FRAMEBUFFER_RELEASE = 0x00048001,
+ RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016,
+ RPI_FWREQ_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013,
+ RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013,
+ RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
+ RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH = 0x00044005,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER = 0x00044006,
+ RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE = 0x00044007,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009,
+ RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PALETTE = 0x0004400b,
+ RPI_FWREQ_FRAMEBUFFER_TEST_LAYER = 0x0004400c,
+ RPI_FWREQ_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VSYNC = 0x0004400e,
+ RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003,
+ RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004,
+ RPI_FWREQ_FRAMEBUFFER_SET_DEPTH = 0x00048005,
+ RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006,
+ RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007,
+ RPI_FWREQ_FRAMEBUFFER_SET_PITCH = 0x00048008,
+ RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009,
+ RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a,
+ RPI_FWREQ_FRAMEBUFFER_SET_PALETTE = 0x0004800b,
+
+ RPI_FWREQ_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f,
+ RPI_FWREQ_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020,
+ RPI_FWREQ_FRAMEBUFFER_SET_VSYNC = 0x0004800e,
+ RPI_FWREQ_FRAMEBUFFER_SET_LAYER = 0x0004800c,
+ RPI_FWREQ_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d,
+ RPI_FWREQ_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f,
+
+ RPI_FWREQ_VCHIQ_INIT = 0x00048010,
+
+ RPI_FWREQ_SET_PLANE = 0x00048015,
+ RPI_FWREQ_GET_DISPLAY_TIMING = 0x00040017,
+ RPI_FWREQ_SET_TIMING = 0x00048017,
+ RPI_FWREQ_GET_DISPLAY_CFG = 0x00040018,
+ RPI_FWREQ_SET_DISPLAY_POWER = 0x00048019,
+ RPI_FWREQ_GET_COMMAND_LINE = 0x00050001,
+ RPI_FWREQ_GET_DMA_CHANNELS = 0x00060001,
+};
+
+enum rpi_firmware_clk_id {
+ RPI_FIRMWARE_EMMC_CLK_ID = 1,
+ RPI_FIRMWARE_UART_CLK_ID,
+ RPI_FIRMWARE_ARM_CLK_ID,
+ RPI_FIRMWARE_CORE_CLK_ID,
+ RPI_FIRMWARE_V3D_CLK_ID,
+ RPI_FIRMWARE_H264_CLK_ID,
+ RPI_FIRMWARE_ISP_CLK_ID,
+ RPI_FIRMWARE_SDRAM_CLK_ID,
+ RPI_FIRMWARE_PIXEL_CLK_ID,
+ RPI_FIRMWARE_PWM_CLK_ID,
+ RPI_FIRMWARE_HEVC_CLK_ID,
+ RPI_FIRMWARE_EMMC2_CLK_ID,
+ RPI_FIRMWARE_M2MC_CLK_ID,
+ RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+ RPI_FIRMWARE_VEC_CLK_ID,
+ RPI_FIRMWARE_NUM_CLK_ID,
+};
+
+#endif /* INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ */
--
2.34.1
next reply other threads:[~2023-06-02 9:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-02 9:30 Sergey Kambalin [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-05-31 15:52 [PATCH] Use named constants in BCM props Sergey Kambalin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230602093002.117073-1-sergey.kambalin@auriga.com \
--to=serg.oker@gmail.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=sergey.kambalin@auriga.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.