Re: [PATCH v6 09/19] openrisc: mm: Convert to GENERIC_IOREMAP

From: Mike Rapoport <rppt@kernel.org>
To: Baoquan He <bhe@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
	linux-mm@kvack.org, arnd@arndb.de, christophe.leroy@csgroup.eu,
	hch@lst.de, willy@infradead.org, agordeev@linux.ibm.com,
	wangkefeng.wang@huawei.com, schnelle@linux.ibm.com,
	David.Laight@ACULAB.COM, shorne@gmail.com, deller@gmx.de,
	Jonas Bonn <jonas@southpole.se>,
	Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>,
	openrisc@lists.librecores.org
Subject: Re: [PATCH v6 09/19] openrisc: mm: Convert to GENERIC_IOREMAP
Date: Sun, 11 Jun 2023 08:46:27 +0300	[thread overview]
Message-ID: <20230611054627.GN52412@kernel.org> (raw)
In-Reply-To: <20230609075528.9390-10-bhe@redhat.com>

On Fri, Jun 09, 2023 at 03:55:18PM +0800, Baoquan He wrote:
> By taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(),
> generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap()
> and iounmap() are all visible and available to arch. Arch needs to
> provide wrapper functions to override the generic versions if there's
> arch specific handling in its ioremap_prot(), ioremap() or iounmap().
> This change will simplify implementation by removing duplicated codes
> with generic_ioremap_prot() and generic_iounmap(), and has the equivalent
> functioality as before.
> 
> For openrisc, the current ioremap() and iounmap() are the same as
> generic version. After taking GENERIC_IOREMAP way, the old ioremap()
> and iounmap() can be completely removed.
> 
> Signed-off-by: Baoquan He <bhe@redhat.com>
> Cc: Stafford Horne <shorne@gmail.com>
> Cc: Jonas Bonn <jonas@southpole.se>
> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> Cc: openrisc@lists.librecores.org

Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>

> ---
> v5->v6:
>   Remove iounmap() because it's the same as the generic version since we
>   have removed the code handling ealry mapping from fixmap pool in
>   patch 3 - Mike
> 
>  arch/openrisc/Kconfig          |  1 +
>  arch/openrisc/include/asm/io.h | 11 ++++----
>  arch/openrisc/mm/ioremap.c     | 49 ----------------------------------
>  3 files changed, 7 insertions(+), 54 deletions(-)
> 
> diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
> index c7f282f60f64..fd9bb76a610b 100644
> --- a/arch/openrisc/Kconfig
> +++ b/arch/openrisc/Kconfig
> @@ -21,6 +21,7 @@ config OPENRISC
>  	select GENERIC_IRQ_PROBE
>  	select GENERIC_IRQ_SHOW
>  	select GENERIC_PCI_IOMAP
> +	select GENERIC_IOREMAP
>  	select GENERIC_CPU_DEVICES
>  	select HAVE_PCI
>  	select HAVE_UID16
> diff --git a/arch/openrisc/include/asm/io.h b/arch/openrisc/include/asm/io.h
> index ee6043a03173..5a6f0f16a5ce 100644
> --- a/arch/openrisc/include/asm/io.h
> +++ b/arch/openrisc/include/asm/io.h
> @@ -15,6 +15,8 @@
>  #define __ASM_OPENRISC_IO_H
>  
>  #include <linux/types.h>
> +#include <asm/pgalloc.h>
> +#include <asm/pgtable.h>
>  
>  /*
>   * PCI: We do not use IO ports in OpenRISC
> @@ -27,11 +29,10 @@
>  #define PIO_OFFSET		0
>  #define PIO_MASK		0
>  
> -#define ioremap ioremap
> -void __iomem *ioremap(phys_addr_t offset, unsigned long size);
> -
> -#define iounmap iounmap
> -extern void iounmap(volatile void __iomem *addr);
> +/*
> + * I/O memory mapping functions.
> + */
> +#define _PAGE_IOREMAP (pgprot_val(PAGE_KERNEL) | _PAGE_CI)
>  
>  #include <asm-generic/io.h>
>  
> diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c
> index cdbcc7e73684..91c8259d4b7e 100644
> --- a/arch/openrisc/mm/ioremap.c
> +++ b/arch/openrisc/mm/ioremap.c
> @@ -22,55 +22,6 @@
>  
>  extern int mem_init_done;
>  
> -/*
> - * Remap an arbitrary physical address space into the kernel virtual
> - * address space. Needed when the kernel wants to access high addresses
> - * directly.
> - *
> - * NOTE! We need to allow non-page-aligned mappings too: we will obviously
> - * have to convert them into an offset in a page-aligned mapping, but the
> - * caller shouldn't need to know that small detail.
> - */
> -void __iomem *__ref ioremap(phys_addr_t addr, unsigned long size)
> -{
> -	phys_addr_t p;
> -	unsigned long v;
> -	unsigned long offset, last_addr;
> -	struct vm_struct *area = NULL;
> -
> -	/* Don't allow wraparound or zero size */
> -	last_addr = addr + size - 1;
> -	if (!size || last_addr < addr)
> -		return NULL;
> -
> -	/*
> -	 * Mappings have to be page-aligned
> -	 */
> -	offset = addr & ~PAGE_MASK;
> -	p = addr & PAGE_MASK;
> -	size = PAGE_ALIGN(last_addr + 1) - p;
> -
> -	area = get_vm_area(size, VM_IOREMAP);
> -	if (!area)
> -		return NULL;
> -	v = (unsigned long)area->addr;
> -
> -	if (ioremap_page_range(v, v + size, p,
> -			__pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_CI))) {
> -		vfree(area->addr);
> -		return NULL;
> -	}
> -
> -	return (void __iomem *)(offset + (char *)v);
> -}
> -EXPORT_SYMBOL(ioremap);
> -
> -void iounmap(volatile void __iomem *addr)
> -{
> -	return vfree((void *)(PAGE_MASK & (unsigned long)addr));
> -}
> -EXPORT_SYMBOL(iounmap);
> -
>  /**
>   * OK, this one's a bit tricky... ioremap can get called before memory is
>   * initialized (early serial console does this) and will want to alloc a page
> -- 
> 2.34.1
> 

-- 
Sincerely yours,
Mike.