From: Krishna Kurapati <quic_kriskura@quicinc.com>
To: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
"Andy Gross" <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Felipe Balbi <balbi@kernel.org>,
Wesley Cheng <quic_wcheng@quicinc.com>,
Johan Hovold <johan@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<quic_pkondeti@quicinc.com>, <quic_ppratap@quicinc.com>,
<quic_jackp@quicinc.com>, <ahalaney@redhat.com>,
<quic_shazhuss@quicinc.com>,
Krishna Kurapati <quic_kriskura@quicinc.com>
Subject: [PATCH v10 00/11] Add multiport support for DWC3 controllers
Date: Fri, 28 Jul 2023 04:02:56 +0530 [thread overview]
Message-ID: <20230727223307.8096-1-quic_kriskura@quicinc.com> (raw)
Currently the DWC3 driver supports only single port controller which
requires at most two PHYs ie HS and SS PHYs. There are SoCs that has
DWC3 controller with multiple ports that can operate in host mode.
Some of the port supports both SS+HS and other port supports only HS
mode.
This change primarily refactors the Phy logic in core driver to allow
multiport support with Generic Phy's.
Changes have been tested on QCOM SoC SA8295P which has 4 ports (2
are HS+SS capable and 2 are HS only capable).
Changes in v10:
Refactored phy init/exit/power-on/off functions in dwc3 core
Refactored dwc3-qcom irq registration and handling
Implemented wakeup for multiport irq's
Moved few macros from xhci.h to xhci-ext-caps.h
Fixed nits pointed out in v9
Fixed Co-developed by and SOB tags in patches 5 and 11
Changes in v9:
Added IRQ support for DP/DM/SS MP Irq's of SC8280
Refactored code to read port count by accessing xhci registers
Changes in v8:
Reorganised code in patch-5
Fixed nitpicks in code according to comments received on v7
Fixed indentation in DT patches
Added drive strength for pinctrl nodes in SA8295 DT
Changes in v7:
Added power event irq's for Multiport controller.
Udpated commit text for patch-9 (adding DT changes for enabling first
port of multiport controller on sa8540-ride).
Fixed check-patch warnings for driver code.
Fixed DT binding errors for changes in snps,dwc3.yaml
Reabsed code on top of usb-next
Changes in v6:
Updated comments in code after.
Updated variables names appropriately as per review comments.
Updated commit text in patch-2 and added additional info as per review
comments.
The patch header in v5 doesn't have "PATHCH v5" notation present. Corrected
it in this version.
Changes in v5:
Added DT support for first port of Teritiary USB controller on SA8540-Ride
Added support for reading port info from XHCI Extended Params registers.
Changes in RFC v4:
Added DT support for SA8295p.
Changes in RFC v3:
Incase any PHY init fails, then clear/exit the PHYs that
are already initialized.
Changes in RFC v2:
Changed dwc3_count_phys to return the number of PHY Phandles in the node.
This will be used now in dwc3_extract_num_phys to increment num_usb2_phy
and num_usb3_phy.
Added new parameter "ss_idx" in dwc3_core_get_phy_ny_node and changed its
structure such that the first half is for HS-PHY and second half is for
SS-PHY.
In dwc3_core_get_phy, for multiport controller, only if SS-PHY phandle is
present, pass proper SS_IDX else pass -1.
Tests done on v10:
Enumeration:
/ # lsusb
Bus 003 Device 001: ID 1d6b:0002
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 002: ID 045e:0040
Bus 004 Device 001: ID 1d6b:0003
Bus 002 Device 001: ID 1d6b:0003
Bus 001 Device 003: ID 17ef:60d1
Interrupt registration:
/ # cat /proc/interrupts | grep dwc
184: 0 0 0 0 0 0 0 0 PDC 127 Level qcom_dwc3 DP_HS1
185: 0 0 0 0 0 0 0 0 PDC 126 Level qcom_dwc3 DM_HS1
186: 0 0 0 0 0 0 0 0 PDC 16 Level qcom_dwc3 SS1
187: 0 0 0 0 0 0 0 0 PDC 129 Level qcom_dwc3 DP_HS2
188: 0 0 0 0 0 0 0 0 PDC 128 Level qcom_dwc3 DM_HS2
189: 0 0 0 0 0 0 0 0 PDC 17 Level qcom_dwc3 SS2
190: 0 0 0 0 0 0 0 0 PDC 131 Level qcom_dwc3 DP_HS3
191: 0 0 0 0 0 0 0 0 PDC 130 Level qcom_dwc3 DM_HS3
192: 0 0 0 0 0 0 0 0 PDC 133 Level qcom_dwc3 DP_HS4
193: 0 0 0 0 0 0 0 0 PDC 132 Level qcom_dwc3 DM_HS4
195: 0 0 0 0 0 0 0 0 PDC 14 Level qcom_dwc3 DP_HS
196: 0 0 0 0 0 0 0 0 PDC 15 Level qcom_dwc3 DM_HS
197: 0 0 0 0 0 0 0 0 PDC 138 Level qcom_dwc3 SS
198: 32 0 0 0 0 0 0 0 GICv3 835 Leel dwc3
199: 0 0 0 0 0 0 0 0 PDC 12 Level qcom_dwc3 DP_HS
200: 0 0 0 0 0 0 0 0 PDC 13 Level qcom_dwc3 DM_HS
201: 0 0 0 0 0 0 0 0 PDC 136 Level qcom_dwc3 SS
Interrupt connfiguration during suspend entry and suspend exit upon device
connect. Speed here in the following log indicates enum usb_device_speed
in dwc3-qcom.
[ 151.625326] K: dwc3_qcom_enable_interrupts index: 0 speed: 0
[ 151.680985] K: dwc3_qcom_enable_interrupts index: 0 speed: 2
[ 151.686841] K: dwc3_qcom_enable_interrupts index: 1 speed: 2
[ 151.692665] K: dwc3_qcom_enable_interrupts index: 2 speed: 0
[ 151.692678] K: dwc3_qcom_enable_interrupts index: 3 speed: 0
[ 151.724912] K: dwc3_qcom_disable_interrupts index: 0 speed: 2
[ 151.730832] K: dwc3_qcom_disable_interrupts index: 1 speed: 2
[ 151.736740] K: dwc3_qcom_disable_interrupts index: 2 speed: 0
[ 151.742646] K: dwc3_qcom_disable_interrupts index: 3 speed: 0
[ 152.010699] K: dwc3_qcom_disable_interrupts index: 0 speed: 0
[ 152.107836] OOM killer enabled.
[ 152.111070] Restarting tasks ... done.
[ 152.115742] random: crng reseeded on system resumption
[ 152.121298] PM: suspend exit
/ # [ 152.240015] usb 1-3: new low-speed USB device number 8 using xhci-hcd
On SC7280 CRD Herobrine variant, enumeration and wakeup was tested and it
works fine:
Enumeration:
localhost ~ # lsusb
Bus 002 Device 004: ID 0bda:8153 Realtek Semiconductor Corp. USB 10/100/1000 LAN
Bus 002 Device 003: ID 05e3:0626 Genesys Logic, Inc. USB3.1 Hub
Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. 4-Port USB 3.1 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 024: ID 046d:c06a Logitech, Inc. USB Optical Mouse
Bus 001 Device 007: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. 4-Port USB 2.1 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
localhost ~ # dmesg | grep hub
[ 3.713331] hub 1-0:1.0: USB hub found
[ 3.717222] hub 1-0:1.0: 1 port detected
[ 3.764330] hub 2-0:1.0: USB hub found
[ 3.768216] hub 2-0:1.0: 1 port detected
[ 4.159720] hub 1-1:1.0: USB hub found
[ 4.165010] hub 1-1:1.0: 4 ports detected
[ 4.322363] hub 2-1:1.0: USB hub found
[ 4.327220] hub 2-1:1.0: 4 ports detected
[ 5.504227] hub 2-1.4:1.0: USB hub found
[ 5.508724] hub 2-1.4:1.0: 4 ports detected
[ 7.263756] hub 1-1.4:1.0: USB hub found
[ 7.268273] hub 1-1.4:1.0: 4 ports detected
[ 10.030906] hub 1-1.4:1.0: USB hub found
[ 10.035352] hub 1-1.4:1.0: 4 ports detected
Interrupt registration on SC7280-CRD:
localhost ~ # cat /proc/interrupts | grep dwc
82: 0 0 0 0 0 0 0 0 GICv3 163 Level qcom_dwc3 HS
211: 0 0 0 0 0 0 0 0 PDC 14 Level qcom_dwc3 DP_HS
212: 0 0 0 0 0 0 0 0 PDC 15 Level qcom_dwc3 DM_HS
213: 0 0 0 0 0 0 0 0 PDC 17 Level qcom_dwc3 SS
Wakeup from system suspend upon mouse click:
[ 1159.589739] K: dwc3_qcom_enable_interrupts port: 0 speed: 3
[ 1160.025300] K: qcom_dwc3_resume_irq irq: 211
[ 1160.149660] K: dwc3_qcom_disable_interrupts port: 0 speed: 3
[ 1161.649610] Resume caused by IRQ 211, qcom_dwc3 DP_HS
Also DT Binding checks were done on both modified yaml files.
Links to previous versions:
Link to v9: https://lore.kernel.org/all/20230621043628.21485-1-quic_kriskura@quicinc.com/
Link to v8: https://lore.kernel.org/all/20230514054917.21318-1-quic_kriskura@quicinc.com/
Link to v7: https://lore.kernel.org/all/20230501143445.3851-1-quic_kriskura@quicinc.com/
Link to v6: https://lore.kernel.org/all/20230405125759.4201-1-quic_kriskura@quicinc.com/
Link to v5: https://lore.kernel.org/all/20230310163420.7582-1-quic_kriskura@quicinc.com/
Link to RFC v4: https://lore.kernel.org/all/20230115114146.12628-1-quic_kriskura@quicinc.com/
Link to RFC v3: https://lore.kernel.org/all/1654709787-23686-1-git-send-email-quic_harshq@quicinc.com/#r
Link to RFC v2: https://lore.kernel.org/all/1653560029-6937-1-git-send-email-quic_harshq@quicinc.com/#r
Andrew Halaney (1):
arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb
controller
Harsh Agarwal (1):
usb: dwc3: core: Refactor PHY logic to support Multiport Controller
Krishna Kurapati (9):
dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
dt-bindings: usb: Add bindings for multiport properties on DWC3
controller
usb: dwc3: core: Access XHCI address space temporarily to read port
info
usb: dwc3: core: Skip setting event buffers for host only controllers
usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB
ports
.../devicetree/bindings/usb/qcom,dwc3.yaml | 29 ++
.../devicetree/bindings/usb/snps,dwc3.yaml | 13 +-
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 53 +++
arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 77 ++++
drivers/usb/dwc3/core.c | 326 ++++++++++++----
drivers/usb/dwc3/core.h | 16 +-
drivers/usb/dwc3/drd.c | 15 +-
drivers/usb/dwc3/dwc3-qcom.c | 358 ++++++++++++------
drivers/usb/host/xhci-ext-caps.h | 5 +
drivers/usb/host/xhci.h | 3 -
11 files changed, 714 insertions(+), 203 deletions(-)
--
2.40.0
next reply other threads:[~2023-07-27 22:34 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-27 22:32 Krishna Kurapati [this message]
2023-07-27 22:32 ` [PATCH v10 01/11] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport Krishna Kurapati
2023-07-28 12:55 ` Krzysztof Kozlowski
2023-07-27 22:32 ` [PATCH v10 02/11] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller Krishna Kurapati
2023-07-27 22:32 ` [PATCH v10 03/11] usb: dwc3: core: Access XHCI address space temporarily to read port info Krishna Kurapati
2023-08-01 0:57 ` Thinh Nguyen
2023-07-27 22:33 ` [PATCH v10 04/11] usb: dwc3: core: Skip setting event buffers for host only controllers Krishna Kurapati
2023-08-01 0:59 ` Thinh Nguyen
2023-07-27 22:33 ` [PATCH v10 05/11] usb: dwc3: core: Refactor PHY logic to support Multiport Controller Krishna Kurapati
2023-07-27 22:33 ` [PATCH v10 06/11] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver Krishna Kurapati
2023-08-06 5:11 ` Bjorn Andersson
2023-08-07 5:46 ` Krishna Kurapati PSSNV
2023-08-08 8:32 ` Krishna Kurapati PSSNV
2023-08-08 11:50 ` Konrad Dybcio
2023-08-09 6:06 ` Krishna Kurapati PSSNV
2023-08-11 17:05 ` Konrad Dybcio
2023-08-12 8:44 ` Krishna Kurapati PSSNV
2023-08-23 10:12 ` Krishna Kurapati PSSNV
2023-09-05 6:05 ` Krishna Kurapati PSSNV
2023-07-27 22:33 ` [PATCH v10 07/11] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport Krishna Kurapati
2023-07-27 22:33 ` [PATCH v10 08/11] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper Krishna Kurapati
2023-07-27 22:33 ` [PATCH v10 09/11] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 Krishna Kurapati
2023-07-27 22:33 ` [PATCH v10 10/11] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports Krishna Kurapati
2023-07-27 22:33 ` [PATCH v10 11/11] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller Krishna Kurapati
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230727223307.8096-1-quic_kriskura@quicinc.com \
--to=quic_kriskura@quicinc.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=agross@kernel.org \
--cc=ahalaney@redhat.com \
--cc=andersson@kernel.org \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=p.zabel@pengutronix.de \
--cc=quic_jackp@quicinc.com \
--cc=quic_pkondeti@quicinc.com \
--cc=quic_ppratap@quicinc.com \
--cc=quic_shazhuss@quicinc.com \
--cc=quic_wcheng@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.