From: Piyush Mehta <piyush.mehta@amd.com>
To: <gregkh@linuxfoundation.org>, <michal.simek@amd.com>,
<Thinh.Nguyen@synopsys.com>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<git@amd.com>, Piyush Mehta <piyush.mehta@amd.com>
Subject: [PATCH] usb: dwc3: core: enable CCI support
Date: Fri, 13 Oct 2023 11:04:48 +0530 [thread overview]
Message-ID: <20231013053448.11056-1-piyush.mehta@amd.com> (raw)
The GSBUSCFG0 register bits [31:16] are used to configure the cache type
settings of the descriptor and data write/read transfers (Cacheable,
Bufferable/ Posted). When CCI is enabled in the design, DWC3 core GSBUSCFG0
cache bits must be updated to support CCI enabled transfers in USB.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
---
DWC3 Register Map Link:
https://docs.xilinx.com/r/en-US/ug1087-zynq-ultrascale-registers/GSBUSCFG0-USB3_XHCI-Register
Register Name GSBUSCFG0
Description Global SoC Bus Configuration Register 0
GSBUSCFG0 (USB3_XHCI) Register Bit-Field:
DATRDREQINFO 31:28
DESRDREQINFO 27:24
DATWRREQINFO 23:20
DESWRREQINFO 19:16
---
drivers/usb/dwc3/core.c | 17 +++++++++++++++++
drivers/usb/dwc3/core.h | 5 +++++
2 files changed, 22 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9c6bf054f15d..fc6892c63abf 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_graph.h>
#include <linux/acpi.h>
#include <linux/pinctrl/consumer.h>
@@ -559,6 +560,20 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
parms->hwparams9 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS9);
}
+static void dwc3_config_soc_bus(struct dwc3 *dwc)
+{
+ if (of_dma_is_coherent(dwc->dev->of_node)) {
+ u32 reg;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0);
+ reg |= DWC3_GSBUSCFG0_DATRDREQINFO_MASK |
+ DWC3_GSBUSCFG0_DESRDREQINFO_MASK |
+ DWC3_GSBUSCFG0_DATWRREQINFO_MASK |
+ DWC3_GSBUSCFG0_DESWRREQINFO_MASK;
+ dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, reg);
+ }
+}
+
static int dwc3_core_ulpi_init(struct dwc3 *dwc)
{
int intf;
@@ -1137,6 +1152,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc3_set_incr_burst_type(dwc);
+ dwc3_config_soc_bus(dwc);
+
ret = dwc3_phy_power_on(dwc);
if (ret)
goto err_exit_phy;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index a69ac67d89fe..bd937025ce05 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -173,6 +173,11 @@
#define DWC3_OSTS 0xcc10
/* Bit fields */
+/* Global SoC Bus Configuration Register: AHB-prot/AXI-cache/OCP-ReqInfo */
+#define DWC3_GSBUSCFG0_DATRDREQINFO_MASK GENMASK(31, 28)
+#define DWC3_GSBUSCFG0_DESRDREQINFO_MASK GENMASK(27, 24)
+#define DWC3_GSBUSCFG0_DATWRREQINFO_MASK GENMASK(23, 20)
+#define DWC3_GSBUSCFG0_DESWRREQINFO_MASK GENMASK(19, 16)
/* Global SoC Bus Configuration INCRx Register 0 */
#define DWC3_GSBUSCFG0_INCR256BRSTENA (1 << 7) /* INCR256 burst */
--
2.17.1
next reply other threads:[~2023-10-13 5:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-13 5:34 Piyush Mehta [this message]
2023-10-20 23:16 ` [PATCH] usb: dwc3: core: enable CCI support Thinh Nguyen
2023-11-06 13:48 ` Mehta, Piyush
2023-11-10 2:37 ` Thinh Nguyen
2023-11-17 5:44 ` Mehta, Piyush
2024-02-23 22:47 ` Thinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231013053448.11056-1-piyush.mehta@amd.com \
--to=piyush.mehta@amd.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=git@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=michal.simek@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.