From: Changhuang Liang <changhuang.liang@starfivetech.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
"Marvin Lin" <milkfafa@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
"Ming Qian" <ming.qian@nxp.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Benjamin Gaignard <benjamin.gaignard@collabora.com>,
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>,
Mingjia Zhang <mingjia.zhang@mediatek.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jack Zhu <jack.zhu@starfivetech.com>,
Changhuang Liang <changhuang.liang@starfivetech.com>,
<linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-staging@lists.linux.dev>
Subject: [PATCH v1 0/9] Add ISP 3A support for StarFive
Date: Wed, 13 Dec 2023 22:50:18 -0800 [thread overview]
Message-ID: <20231214065027.28564-1-changhuang.liang@starfivetech.com> (raw)
This series implements the ISP 3A function to the Camera Subsystem on StarFive
JH7110 SoC. The series has been tested on the VisionFive 2 board.
This series is based on top of the master branch of media_stage repository,
which is tested with a v4l2-compliance compiled from the git repo
(git://linuxtv.org/v4l-utils.git).
The following are the media graph for the device and the v4l2-compliance
output.
===========================================================================
[the media graph]:
digraph board {
rankdir=TB
n00000001 [label="{{<port0> 0} | stf_isp\n/dev/v4l-subdev0 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
n00000001:port1 -> n00000009
n00000001:port2 -> n0000000d
n00000005 [label="capture_raw\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
n00000009 [label="capture_yuv\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
n0000000d [label="capture_scd\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
n00000015 [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n/dev/v4l-subdev1 | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
n00000015:port1 -> n00000001:port0
n00000015:port1 -> n00000005 [style=dashed]
n0000001f [label="{{} | imx219 6-0010\n/dev/v4l-subdev2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
n0000001f:port0 -> n00000015:port0 [style=bold]
}
[v4l2-compliance test]:
# v4l2-compliance -m /dev/media0
v4l2-compliance 1.27.0, 64 bits, 64-bit time_t
Compliance test for starfive-camss device /dev/media0:
Media Driver Info:
Driver name : starfive-camss
Model : Starfive Camera Subsystem
Serial :
Bus info : platform:19840000.camss
Media version : 6.7.0
Hardware revision: 0x00000000 (0)
Driver version : 6.7.0
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
test MEDIA_IOC_G_TOPOLOGY: OK
Entities: 6 Interfaces: 6 Pads: 12 Links: 11
test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
test MEDIA_IOC_SETUP_LINK: OK
Total for starfive-camss device /dev/media0: 8, Succeeded: 8, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for starfive-camss device /dev/video0:
Driver Info:
Driver name : starfive-camss
Card type : Starfive Camera Subsystem
Bus info : platform:19840000.camss
Driver version : 6.7.0
Capabilities : 0xa4200001
Video Capture
I/O MC
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x24200001
Video Capture
I/O MC
Streaming
Extended Pix Format
Media Driver Info:
Driver name : starfive-camss
Model : Starfive Camera Subsystem
Serial :
Bus info : platform:19840000.camss
Media version : 6.7.0
Hardware revision: 0x00000000 (0)
Driver version : 6.7.0
Interface Info:
ID : 0x03000007
Type : V4L Video
Entity Info:
ID : 0x00000005 (5)
Name : capture_raw
Function : V4L2 I/O
Pad 0x01000006 : 0: Sink
Link 0x0200001d: from remote pad 0x1000017 of entity 'cdns_csi2rx.19800000.csi-bridge' (Video Interface Bridge): Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for starfive-camss device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for starfive-camss device /dev/video1:
Driver Info:
Driver name : starfive-camss
Card type : Starfive Camera Subsystem
Bus info : platform:19840000.camss
Driver version : 6.7.0
Capabilities : 0xa4200001
Video Capture
I/O MC
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x24200001
Video Capture
I/O MC
Streaming
Extended Pix Format
Media Driver Info:
Driver name : starfive-camss
Model : Starfive Camera Subsystem
Serial :
Bus info : platform:19840000.camss
Media version : 6.7.0
Hardware revision: 0x00000000 (0)
Driver version : 6.7.0
Interface Info:
ID : 0x0300000b
Type : V4L Video
Entity Info:
ID : 0x00000009 (9)
Name : capture_yuv
Function : V4L2 I/O
Pad 0x0100000a : 0: Sink
Link 0x02000011: from remote pad 0x1000003 of entity 'stf_isp' (Image Signal Processor): Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video1 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for starfive-camss device /dev/video1: 47, Succeeded: 47, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for starfive-camss device /dev/video2:
Driver Info:
Driver name : starfive-camss
Card type : Starfive Camera Subsystem
Bus info : platform:19840000.camss
Driver version : 6.7.0
Capabilities : 0xa4a00000
Metadata Capture
I/O MC
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x24a00000
Metadata Capture
I/O MC
Streaming
Extended Pix Format
Media Driver Info:
Driver name : starfive-camss
Model : Starfive Camera Subsystem
Serial :
Bus info : platform:19840000.camss
Media version : 6.7.0
Hardware revision: 0x00000000 (0)
Driver version : 6.7.0
Interface Info:
ID : 0x0300000f
Type : V4L Video
Entity Info:
ID : 0x0000000d (13)
Name : capture_scd
Function : V4L2 I/O
Pad 0x0100000e : 0: Sink
Link 0x02000013: from remote pad 0x1000004 of entity 'stf_isp' (Image Signal Processor): Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video2 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for starfive-camss device /dev/video2: 47, Succeeded: 47, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for starfive-camss device /dev/v4l-subdev0:
Driver Info:
Driver version : 6.7.0
Capabilities : 0x00000000
Media Driver Info:
Driver name : starfive-camss
Model : Starfive Camera Subsystem
Serial :
Bus info : platform:19840000.camss
Media version : 6.7.0
Hardware revision: 0x00000000 (0)
Driver version : 6.7.0
Interface Info:
ID : 0x03000023
Type : V4L Sub-Device
Entity Info:
ID : 0x00000001 (1)
Name : stf_isp
Function : Image Signal Processor
Pad 0x0stf_isp: ================= START STATUS =================
1000002 : 0: Sstf_isp: ================== END STATUS ==================
ink
Link 0x0200001b: from remote pad 0x1000017 of entity 'cdns_csi2rx.19800000.csi-bridge' (Video Interface Bridge): Data
Pad 0x01000003 : 1: Source
Link 0x02000011: to remote pad 0x100000a of entity 'capture_yuv' (V4L2 I/O): Data
Pad 0x01000004 : 2: Source
Link 0x02000013: to remote pad 0x100000e of entity 'capture_scd' (V4L2 I/O): Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/v4l-subdev0 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 1):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 2):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Standard Compound Controls: 0 Private Compound Controls: 16
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAPcdns_csi2rx.19800000.csi-bridge: ================= START STATUS =================
: OK (Ncdns_csi2rx.19800000.csi-bridge: ================== END STATUS ==================
ot Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for starfive-camss device /dev/v4l-subdev0: 66, Succeeded: 66, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for starfive-camss device /dev/v4l-subdev1:
Driver Info:
Driver version : 6.7.0
Capabilities : 0x00000000
Media Driver Info:
Driver name : starfive-camss
Model : Starfive Camera Subsystem
Serial :
Bus info : platform:19840000.camss
Media version : 6.7.0
Hardware revision: 0x00000000 (0)
Driver version : 6.7.0
Interface Info:
ID : 0x03000025
Type : V4L Sub-Device
Entity Info:
ID : 0x00000015 (21)
Name : cdns_csi2rx.19800000.csi-bridge
Function : Video Interface Bridge
Pad 0x01000016 : 0: Sink
Link 0x02000021: from remote pad 0x1000020 of entity 'imx219 6-0010' (Camera Sensor): Data, Enabled, Immutable
Pad 0x01000017 : 1: Source
Link 0x0200001b: to remote pad 0x1000002 of entity 'stf_isp' (Image Signal Processor): Data
Link 0x0200001d: to remote pad 0x1000006 of entity 'capture_raw' (V4L2 I/O): Data
Pad 0x01000018 : 2: Source
Pad 0x01000019 : 3: Source
Pad 0x0100001a : 4: Source
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/v4l-subdev1 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 1):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 2):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 3):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 4):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for starfive-camss device /dev/v4l-subdev1: 80, Succeeded: 80, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for starfive-camss device /dev/v4l-subdev2:
Driver Info:
Driver version : 6.7.0
Capabilities : 0x00000000
Media Driver Info:
Driver name : starfive-camss
Model : Starfive Camera Subsysteimx219 6-0010: ================= START STATUS =================
m
Serial imx219 6-0010: ================== END STATUS ==================
:
Bus info : platform:19840000.camss
Media version : 6.7.0
Hardware revision: 0x00000000 (0)
Driver version : 6.7.0
Interface Info:
ID : 0x03000027
Type : V4L Sub-Device
Entity Info:
ID : 0x0000001f (31)
Name : imx219 6-0010
Function : Camera Sensor
Pad 0x01000020 : 0: Source
Link 0x02000021: to remote pad 0x1000016 of entity 'cdns_csi2rx.19800000.csi-bridge' (Video Interface Bridge): Data, Enabled, Immutable
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/v4l-subdev2 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Source Pad 0):
Try Stream 0
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Try VIDIOC_SUBDEV_G/S_FMT: OK
warn: v4l2-test-subdevs.cpp(541): VIDIOC_SUBDEV_G_SELECTION is supported for target 0 but not VIDIOC_SUBDEV_S_SELECTION
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK
Active Stream 0
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Active VIDIOC_SUBDEV_G/S_FMT: OK
warn: v4l2-test-subdevs.cpp(541): VIDIOC_SUBDEV_G_SELECTION is supported for target 0 but not VIDIOC_SUBDEV_S_SELECTION
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 20 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for starfive-camss device /dev/v4l-subdev2: 52, Succeeded: 52, Failed: 0, Warnings: 2
Grand Total for starfive-camss device /dev/media0: 347, Succeeded: 347, Failed: 0, Warnings: 2
Two warnings are from the imx219, can ignore them.
Changhuang Liang (9):
media: v4l2-ctrls: Add user controls for StarFive JH7110 ISP
staging: media: starfive: camss: Add ISP controls
media: videodev2.h, v4l2-ioctl: Add StarFive ISP meta buffer format
staging: media: starfive: camss: Replace format index with pad
staging: media: starfive: camss: Add for StarFive ISP 3A
staging: media: starfive: camss: Update ISP initialise config for 3A
staging: media: starfive: camss: Add V4L2_CAP_IO_MC capability
staging: media: starfive: Add frame sync event for video capture
device
admin-guide: media: Update documents for StarFive Camera Subsystem
.../admin-guide/media/starfive_camss.rst | 9 +-
.../media/starfive_camss_graph.dot | 20 +-
MAINTAINERS | 1 +
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
.../staging/media/starfive/camss/stf-camss.c | 8 +
.../staging/media/starfive/camss/stf-camss.h | 8 +
.../media/starfive/camss/stf-capture.c | 98 +++-
.../media/starfive/camss/stf-isp-hw-ops.c | 550 ++++++++++++++++++
.../staging/media/starfive/camss/stf-isp.c | 366 +++++++++++-
.../staging/media/starfive/camss/stf-isp.h | 179 ++++++
.../staging/media/starfive/camss/stf-video.c | 158 ++++-
.../staging/media/starfive/camss/stf-video.h | 2 +
include/uapi/linux/jh7110-isp.h | 342 +++++++++++
include/uapi/linux/v4l2-controls.h | 6 +
include/uapi/linux/videodev2.h | 3 +
15 files changed, 1711 insertions(+), 40 deletions(-)
create mode 100644 include/uapi/linux/jh7110-isp.h
--
2.25.1
next reply other threads:[~2023-12-14 6:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 6:50 Changhuang Liang [this message]
2023-12-14 6:50 ` [PATCH v1 1/9] media: v4l2-ctrls: Add user controls for StarFive JH7110 ISP Changhuang Liang
2023-12-14 11:39 ` Laurent Pinchart
2023-12-15 5:55 ` Changhuang Liang
2023-12-15 10:24 ` Laurent Pinchart
2023-12-14 6:50 ` [PATCH v1 2/9] staging: media: starfive: camss: Add ISP controls Changhuang Liang
2023-12-14 6:50 ` [PATCH v1 3/9] media: videodev2.h, v4l2-ioctl: Add StarFive ISP meta buffer format Changhuang Liang
2023-12-14 11:34 ` Laurent Pinchart
2023-12-14 6:50 ` [PATCH v1 4/9] staging: media: starfive: camss: Replace format index with pad Changhuang Liang
2023-12-14 12:12 ` Laurent Pinchart
2023-12-14 6:50 ` [PATCH v1 5/9] staging: media: starfive: camss: Add for StarFive ISP 3A Changhuang Liang
2023-12-14 6:50 ` [PATCH v1 6/9] staging: media: starfive: camss: Update ISP initialise config for 3A Changhuang Liang
2023-12-14 6:50 ` [PATCH v1 7/9] staging: media: starfive: camss: Add V4L2_CAP_IO_MC capability Changhuang Liang
2023-12-14 6:50 ` [PATCH v1 8/9] staging: media: starfive: Add frame sync event for video capture device Changhuang Liang
2023-12-14 12:19 ` Laurent Pinchart
2023-12-14 6:50 ` [PATCH v1 9/9] admin-guide: media: Update documents for StarFive Camera Subsystem Changhuang Liang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231214065027.28564-1-changhuang.liang@starfivetech.com \
--to=changhuang.liang@starfivetech.com \
--cc=benjamin.gaignard@collabora.com \
--cc=bryan.odonoghue@linaro.org \
--cc=dan.carpenter@linaro.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jack.zhu@starfivetech.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=milkfafa@gmail.com \
--cc=ming.qian@nxp.com \
--cc=mingjia.zhang@mediatek.com \
--cc=nicolas.dufresne@collabora.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen+renesas@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.