All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 0/7] VMware hypercalls enhancements
@ 2024-01-09  8:40 ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

VMware hypercalls invocations were all spread out across the kernel
implementing same ABI as in-place asm-inline. With encrypted memory
and confidential computing it became harder to maintain every changes
in these hypercall implementations.

Intention of this patchset is to introduce arch independent VMware
hypercall API layer other subsystems such as device drivers can call
to, while hiding architecture specific implementation behind.

Second patch introduces the vmware_hypercall low and high bandwidth
families of functions, with little enhancements there.
Sixth patch adds tdx hypercall support

arm64 implementation of vmware_hypercalls is in drivers/gpu/drm/
vmwgfx/vmwgfx_msg_arm64.h and going to be moved to arch/arm64 with
a separate patchset with the introduction of VMware Linux guest
support for arm64.

No functional changes in drivers/input/mouse/vmmouse.c and
drivers/ptp/ptp_vmw.c

v5->v6 change:
- Added ack by Kirill A. Shutemov in patch 7. 

v4->v5 changes:
  [patch 2]:
- Fixed the problem reported by Simon Horman where build fails after
  patch 2 application. Do not undefine VMWARE_HYPERCALL for now, and
  update vmwgfx, vmmouse and ptp_vmw code for new VMWARE_HYPERCALL macro.
- Introduce new patch 6 to undefine VMWARE_HYPERCALL, which is safe to do
  after patches 3 to 5.
- [patch 7 (former patch 6)]: Add missing r15 (CPL) initialization.

v3->v4 changes: (no functional changes in patches 1-5)
  [patch 2]:
- Added the comment with VMware hypercall ABI description.
  [patch 6]:
- vmware_tdx_hypercall_args remove in6/out6 arguments as excessive.
- vmware_tdx_hypercall return ULONG_MAX on error to mimic bad hypercall
  command error from the hypervisor.
- Replaced pr_warn by pr_warn_once as pointed by Kirill Shutemov.
- Fixed the warning reported by Intel's kernel test robot.
- Added the comment describing VMware TDX hypercall ABI.

v2->v3 changes: (no functional changes in patches 1-5)
- Improved commit message in patches 1, 2 and 5 as was suggested by
  Borislav Petkov.
- To address Dave Hansen's concern, patch 6 was reorganized to avoid
  exporting bare __tdx_hypercall and to make exported vmware_tdx_hypercall
  VMWare guest specific.

v1->v2 changes (no functional changes):
- Improved commit message in patches 2 and 5.
- Added Reviewed-by for all patches.
- Added Ack from Dmitry Torokhov in patch 4. No fixes regarding reported
  by Simon Horman gcc error in this patch.

Alexey Makhalov (7):
  x86/vmware: Move common macros to vmware.h
  x86/vmware: Introduce VMware hypercall API
  ptp/vmware: Use VMware hypercall API
  input/vmmouse: Use VMware hypercall API
  drm/vmwgfx: Use VMware hypercall API
  x86/vmware: Undefine VMWARE_HYPERCALL
  x86/vmware: Add TDX hypercall support

 arch/x86/include/asm/vmware.h             | 364 ++++++++++++++++++++--
 arch/x86/kernel/cpu/vmware.c              | 117 +++----
 drivers/gpu/drm/vmwgfx/vmwgfx_msg.c       | 173 ++++------
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 ++++++++----
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h   | 185 -----------
 drivers/input/mouse/vmmouse.c             |  76 ++---
 drivers/ptp/ptp_vmw.c                     |  12 +-
 7 files changed, 599 insertions(+), 525 deletions(-)

-- 
2.39.0


^ permalink raw reply	[flat|nested] 28+ messages in thread

* [PATCH v6 0/7] VMware hypercalls enhancements
@ 2024-01-09  8:40 ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

VMware hypercalls invocations were all spread out across the kernel
implementing same ABI as in-place asm-inline. With encrypted memory
and confidential computing it became harder to maintain every changes
in these hypercall implementations.

Intention of this patchset is to introduce arch independent VMware
hypercall API layer other subsystems such as device drivers can call
to, while hiding architecture specific implementation behind.

Second patch introduces the vmware_hypercall low and high bandwidth
families of functions, with little enhancements there.
Sixth patch adds tdx hypercall support

arm64 implementation of vmware_hypercalls is in drivers/gpu/drm/
vmwgfx/vmwgfx_msg_arm64.h and going to be moved to arch/arm64 with
a separate patchset with the introduction of VMware Linux guest
support for arm64.

No functional changes in drivers/input/mouse/vmmouse.c and
drivers/ptp/ptp_vmw.c

v5->v6 change:
- Added ack by Kirill A. Shutemov in patch 7. 

v4->v5 changes:
  [patch 2]:
- Fixed the problem reported by Simon Horman where build fails after
  patch 2 application. Do not undefine VMWARE_HYPERCALL for now, and
  update vmwgfx, vmmouse and ptp_vmw code for new VMWARE_HYPERCALL macro.
- Introduce new patch 6 to undefine VMWARE_HYPERCALL, which is safe to do
  after patches 3 to 5.
- [patch 7 (former patch 6)]: Add missing r15 (CPL) initialization.

v3->v4 changes: (no functional changes in patches 1-5)
  [patch 2]:
- Added the comment with VMware hypercall ABI description.
  [patch 6]:
- vmware_tdx_hypercall_args remove in6/out6 arguments as excessive.
- vmware_tdx_hypercall return ULONG_MAX on error to mimic bad hypercall
  command error from the hypervisor.
- Replaced pr_warn by pr_warn_once as pointed by Kirill Shutemov.
- Fixed the warning reported by Intel's kernel test robot.
- Added the comment describing VMware TDX hypercall ABI.

v2->v3 changes: (no functional changes in patches 1-5)
- Improved commit message in patches 1, 2 and 5 as was suggested by
  Borislav Petkov.
- To address Dave Hansen's concern, patch 6 was reorganized to avoid
  exporting bare __tdx_hypercall and to make exported vmware_tdx_hypercall
  VMWare guest specific.

v1->v2 changes (no functional changes):
- Improved commit message in patches 2 and 5.
- Added Reviewed-by for all patches.
- Added Ack from Dmitry Torokhov in patch 4. No fixes regarding reported
  by Simon Horman gcc error in this patch.

Alexey Makhalov (7):
  x86/vmware: Move common macros to vmware.h
  x86/vmware: Introduce VMware hypercall API
  ptp/vmware: Use VMware hypercall API
  input/vmmouse: Use VMware hypercall API
  drm/vmwgfx: Use VMware hypercall API
  x86/vmware: Undefine VMWARE_HYPERCALL
  x86/vmware: Add TDX hypercall support

 arch/x86/include/asm/vmware.h             | 364 ++++++++++++++++++++--
 arch/x86/kernel/cpu/vmware.c              | 117 +++----
 drivers/gpu/drm/vmwgfx/vmwgfx_msg.c       | 173 ++++------
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 ++++++++----
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h   | 185 -----------
 drivers/input/mouse/vmmouse.c             |  76 ++---
 drivers/ptp/ptp_vmw.c                     |  12 +-
 7 files changed, 599 insertions(+), 525 deletions(-)

-- 
2.39.0


^ permalink raw reply	[flat|nested] 28+ messages in thread

* [PATCH v6 1/7] x86/vmware: Move common macros to vmware.h
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09  8:40   ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

Move VMware hypercall macros to vmware.h. This is a prerequisite for
the introduction of vmware_hypercall API. No functional changes besides
exporting vmware_hypercall_mode symbol.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
---
 arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++------
 arch/x86/kernel/cpu/vmware.c  | 57 +++------------------------
 2 files changed, 66 insertions(+), 63 deletions(-)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..de2533337611 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,34 @@
 
 /*
  * The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
  *
  * The new vmcall interface instead uses a set of flags to select
  * bandwidth mode and transfer direction. The flags should be loaded
  * into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
- *
- * In short, new driver code should strictly use the new definition of
- * %dx content.
+ * number if the I/O port method is used.
  */
 
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT    0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB		BIT(0)
+#define VMWARE_HYPERVISOR_OUT		BIT(1)
+
+#define VMWARE_HYPERVISOR_PORT		0x5658
+#define VMWARE_HYPERVISOR_PORT_HB	(VMWARE_HYPERVISOR_PORT | \
+					 VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC		0x564d5868U
+
+#define VMWARE_CMD_GETVERSION		10
+#define VMWARE_CMD_GETHZ		45
+#define VMWARE_CMD_GETVCPU_INFO		68
+#define VMWARE_CMD_STEALCLOCK		91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL	BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL	BIT(1)
 
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB   BIT(0)
-#define VMWARE_HYPERVISOR_OUT  BIT(1)
+extern u8 vmware_hypercall_mode;
 
 /* The low bandwidth call. The low word of edx is presumed clear. */
 #define VMWARE_HYPERCALL						\
@@ -54,4 +63,43 @@
 		      "rep insb",					\
 		      "vmcall", X86_FEATURE_VMCALL,			\
 		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
+	__asm__("inl (%%dx), %%eax" :					\
+		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
+		"a"(VMWARE_HYPERVISOR_MAGIC),				\
+		"c"(VMWARE_CMD_##cmd),					\
+		"d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) :		\
+		"memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx)				\
+	__asm__("vmcall" :						\
+		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
+		"a"(VMWARE_HYPERVISOR_MAGIC),				\
+		"c"(VMWARE_CMD_##cmd),					\
+		"d"(0), "b"(UINT_MAX) :					\
+		"memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx)				\
+	__asm__("vmmcall" :						\
+		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
+		"a"(VMWARE_HYPERVISOR_MAGIC),				\
+		"c"(VMWARE_CMD_##cmd),					\
+		"d"(0), "b"(UINT_MAX) :					\
+		"memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do {		\
+	switch (vmware_hypercall_mode) {			\
+	case CPUID_VMWARE_FEATURES_ECX_VMCALL:			\
+		VMWARE_VMCALL(cmd, eax, ebx, ecx, edx);		\
+		break;						\
+	case CPUID_VMWARE_FEATURES_ECX_VMMCALL:			\
+		VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx);	\
+		break;						\
+	default:						\
+		VMWARE_PORT(cmd, eax, ebx, ecx, edx);		\
+		break;						\
+	}							\
+	} while (0)
+
 #endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 11f83d07925e..4db8e1daa4a1 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,60 +41,14 @@
 
 #define CPUID_VMWARE_INFO_LEAF               0x40000000
 #define CPUID_VMWARE_FEATURES_LEAF           0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL    BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL     BIT(1)
 
-#define VMWARE_HYPERVISOR_MAGIC	0x564D5868
-
-#define VMWARE_CMD_GETVERSION    10
-#define VMWARE_CMD_GETHZ         45
-#define VMWARE_CMD_GETVCPU_INFO  68
-#define VMWARE_CMD_LEGACY_X2APIC  3
-#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK    91
+#define VCPU_LEGACY_X2APIC	3
+#define VCPU_RESERVED		31
 
 #define STEALCLOCK_NOT_AVAILABLE (-1)
 #define STEALCLOCK_DISABLED        0
 #define STEALCLOCK_ENABLED         1
 
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
-	__asm__("inl (%%dx), %%eax" :					\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) :		\
-		"memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx)				\
-	__asm__("vmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx)                         \
-	__asm__("vmmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do {		\
-	switch (vmware_hypercall_mode) {			\
-	case CPUID_VMWARE_FEATURES_ECX_VMCALL:			\
-		VMWARE_VMCALL(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	case CPUID_VMWARE_FEATURES_ECX_VMMCALL:			\
-		VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx);	\
-		break;						\
-	default:						\
-		VMWARE_PORT(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	}							\
-	} while (0)
-
 struct vmware_steal_time {
 	union {
 		uint64_t clock;	/* stolen time counter in units of vtsc */
@@ -108,7 +62,8 @@ struct vmware_steal_time {
 };
 
 static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode     __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
 
 static inline int __vmware_platform(void)
 {
@@ -476,8 +431,8 @@ static bool __init vmware_legacy_x2apic_available(void)
 {
 	uint32_t eax, ebx, ecx, edx;
 	VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
-	return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
-		(eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
+	return !(eax & BIT(VCPU_RESERVED)) &&
+		(eax & BIT(VCPU_LEGACY_X2APIC));
 }
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 1/7] x86/vmware: Move common macros to vmware.h
@ 2024-01-09  8:40   ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

Move VMware hypercall macros to vmware.h. This is a prerequisite for
the introduction of vmware_hypercall API. No functional changes besides
exporting vmware_hypercall_mode symbol.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
---
 arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++------
 arch/x86/kernel/cpu/vmware.c  | 57 +++------------------------
 2 files changed, 66 insertions(+), 63 deletions(-)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..de2533337611 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,34 @@
 
 /*
  * The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
  *
  * The new vmcall interface instead uses a set of flags to select
  * bandwidth mode and transfer direction. The flags should be loaded
  * into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
- *
- * In short, new driver code should strictly use the new definition of
- * %dx content.
+ * number if the I/O port method is used.
  */
 
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT    0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB		BIT(0)
+#define VMWARE_HYPERVISOR_OUT		BIT(1)
+
+#define VMWARE_HYPERVISOR_PORT		0x5658
+#define VMWARE_HYPERVISOR_PORT_HB	(VMWARE_HYPERVISOR_PORT | \
+					 VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC		0x564d5868U
+
+#define VMWARE_CMD_GETVERSION		10
+#define VMWARE_CMD_GETHZ		45
+#define VMWARE_CMD_GETVCPU_INFO		68
+#define VMWARE_CMD_STEALCLOCK		91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL	BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL	BIT(1)
 
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB   BIT(0)
-#define VMWARE_HYPERVISOR_OUT  BIT(1)
+extern u8 vmware_hypercall_mode;
 
 /* The low bandwidth call. The low word of edx is presumed clear. */
 #define VMWARE_HYPERCALL						\
@@ -54,4 +63,43 @@
 		      "rep insb",					\
 		      "vmcall", X86_FEATURE_VMCALL,			\
 		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
+	__asm__("inl (%%dx), %%eax" :					\
+		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
+		"a"(VMWARE_HYPERVISOR_MAGIC),				\
+		"c"(VMWARE_CMD_##cmd),					\
+		"d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) :		\
+		"memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx)				\
+	__asm__("vmcall" :						\
+		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
+		"a"(VMWARE_HYPERVISOR_MAGIC),				\
+		"c"(VMWARE_CMD_##cmd),					\
+		"d"(0), "b"(UINT_MAX) :					\
+		"memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx)				\
+	__asm__("vmmcall" :						\
+		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
+		"a"(VMWARE_HYPERVISOR_MAGIC),				\
+		"c"(VMWARE_CMD_##cmd),					\
+		"d"(0), "b"(UINT_MAX) :					\
+		"memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do {		\
+	switch (vmware_hypercall_mode) {			\
+	case CPUID_VMWARE_FEATURES_ECX_VMCALL:			\
+		VMWARE_VMCALL(cmd, eax, ebx, ecx, edx);		\
+		break;						\
+	case CPUID_VMWARE_FEATURES_ECX_VMMCALL:			\
+		VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx);	\
+		break;						\
+	default:						\
+		VMWARE_PORT(cmd, eax, ebx, ecx, edx);		\
+		break;						\
+	}							\
+	} while (0)
+
 #endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 11f83d07925e..4db8e1daa4a1 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,60 +41,14 @@
 
 #define CPUID_VMWARE_INFO_LEAF               0x40000000
 #define CPUID_VMWARE_FEATURES_LEAF           0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL    BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL     BIT(1)
 
-#define VMWARE_HYPERVISOR_MAGIC	0x564D5868
-
-#define VMWARE_CMD_GETVERSION    10
-#define VMWARE_CMD_GETHZ         45
-#define VMWARE_CMD_GETVCPU_INFO  68
-#define VMWARE_CMD_LEGACY_X2APIC  3
-#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK    91
+#define VCPU_LEGACY_X2APIC	3
+#define VCPU_RESERVED		31
 
 #define STEALCLOCK_NOT_AVAILABLE (-1)
 #define STEALCLOCK_DISABLED        0
 #define STEALCLOCK_ENABLED         1
 
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
-	__asm__("inl (%%dx), %%eax" :					\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) :		\
-		"memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx)				\
-	__asm__("vmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx)                         \
-	__asm__("vmmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do {		\
-	switch (vmware_hypercall_mode) {			\
-	case CPUID_VMWARE_FEATURES_ECX_VMCALL:			\
-		VMWARE_VMCALL(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	case CPUID_VMWARE_FEATURES_ECX_VMMCALL:			\
-		VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx);	\
-		break;						\
-	default:						\
-		VMWARE_PORT(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	}							\
-	} while (0)
-
 struct vmware_steal_time {
 	union {
 		uint64_t clock;	/* stolen time counter in units of vtsc */
@@ -108,7 +62,8 @@ struct vmware_steal_time {
 };
 
 static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode     __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
 
 static inline int __vmware_platform(void)
 {
@@ -476,8 +431,8 @@ static bool __init vmware_legacy_x2apic_available(void)
 {
 	uint32_t eax, ebx, ecx, edx;
 	VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
-	return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
-		(eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
+	return !(eax & BIT(VCPU_RESERVED)) &&
+		(eax & BIT(VCPU_LEGACY_X2APIC));
 }
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 2/7] x86/vmware: Introduce VMware hypercall API
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09  8:40   ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

Introduce vmware_hypercall family of functions. It is a common
implementation to be used by the VMware guest code and virtual
device drivers in architecture independent manner.

The API consists of vmware_hypercallX and vmware_hypercall_hb_{out,in}
set of functions by analogy with KVM hypercall API. Architecture
specific implementation is hidden inside.

It will simplify future enhancements in VMware hypercalls such
as SEV-ES and TDX related changes without needs to modify a
caller in device drivers code.

Current implementation extends an idea from commit bac7b4e84323
("x86/vmware: Update platform detection code for VMCALL/VMMCALL
hypercalls") to have a slow, but safe path in VMWARE_HYPERCALL
earlier during the boot when alternatives are not yet applied.
This logic was inherited from VMWARE_CMD from the commit mentioned
above. Default alternative code was optimized by size to reduce
excessive nop alignment once alternatives are applied. Total
default code size is 26 bytes, in worse case (3 bytes alternative)
remaining 23 bytes will be aligned by only 3 long NOP instructions.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Jeff Sipek <jsipek@vmware.com>
---
 arch/x86/include/asm/vmware.h           | 288 +++++++++++++++++++-----
 arch/x86/kernel/cpu/vmware.c            |  35 ++-
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h |   6 +-
 drivers/input/mouse/vmmouse.c           |   2 +
 drivers/ptp/ptp_vmw.c                   |   2 +
 5 files changed, 252 insertions(+), 81 deletions(-)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index de2533337611..2ac87068184a 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -7,14 +7,37 @@
 #include <linux/stringify.h>
 
 /*
- * The hypercall definitions differ in the low word of the %edx argument
+ * VMware hypercall ABI.
+ *
+ * - Low bandwidth (LB) hypercalls (I/O port based, vmcall and vmmcall)
+ * have up to 6 input and 6 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg2 - Hypercall command
+ * arg3 bits [15:0] - Port number, LB and direction flags
+ *
+ * - High bandwidth (HB) hypercalls are I/O port based only. They have
+ * up to 7 input and 7 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5), %ebp (arg6).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg1 - Hypercall command
+ * arg3 bits [15:0] - Port number, HB and direction flags
+ *
+ * For compatibility purposes, x86_64 systems use only lower 32 bits
+ * for input and output arguments.
+ *
+ * The hypercall definitions differ in the low word of the %edx (arg3)
  * in the following way: the old I/O port based interface uses the port
  * number to distinguish between high- and low bandwidth versions, and
  * uses IN/OUT instructions to define transfer direction.
  *
  * The new vmcall interface instead uses a set of flags to select
  * bandwidth mode and transfer direction. The flags should be loaded
- * into %dx by any user and are automatically replaced by the port
+ * into arg3 by any user and are automatically replaced by the port
  * number if the I/O port method is used.
  */
 
@@ -37,69 +60,218 @@
 
 extern u8 vmware_hypercall_mode;
 
-/* The low bandwidth call. The low word of edx is presumed clear. */
-#define VMWARE_HYPERCALL						\
-	ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT) ", %%dx; " \
-		      "inl (%%dx), %%eax",				\
-		      "vmcall", X86_FEATURE_VMCALL,			\
-		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
-
 /*
- * The high bandwidth out call. The low word of edx is presumed to have the
- * HB and OUT bits set.
+ * The low bandwidth call. The low word of %edx is presumed to have OUT bit
+ * set. The high word of %edx may contain input data from the caller.
  */
-#define VMWARE_HYPERCALL_HB_OUT						\
-	ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
-		      "rep outsb",					\
+#define VMWARE_HYPERCALL						\
+	ALTERNATIVE_3("cmpb $"						\
+			__stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL)	\
+			", %[mode]\n\t"					\
+		      "jg 2f\n\t"					\
+		      "je 1f\n\t"					\
+		      "movw %[port], %%dx\n\t"				\
+		      "inl (%%dx), %%eax\n\t"				\
+		      "jmp 3f\n\t"					\
+		      "1: vmmcall\n\t"					\
+		      "jmp 3f\n\t"					\
+		      "2: vmcall\n\t"					\
+		      "3:\n\t",						\
+		      "movw %[port], %%dx\n\t"				\
+		      "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR,	\
 		      "vmcall", X86_FEATURE_VMCALL,			\
 		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
 
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (0)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
+				uint32_t *out1, uint32_t *out2)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=b" (*out1), "=c" (*out2)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (0)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
+				uint32_t *out1, uint32_t *out2,
+				uint32_t *out3)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (0)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out2)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=c" (*out2)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (in3),
+		  "S" (in4),
+		  "D" (in5)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+				unsigned long in3, uint32_t *out2,
+				uint32_t *out3, uint32_t *out4,
+				uint32_t *out5)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
+		  "=D" (*out5)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (in3)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out1,
+				uint32_t *out2, uint32_t *out3)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (in3),
+		  "S" (in4),
+		  "D" (in5)
+		: "cc", "memory");
+	return out0;
+}
+
+
+#ifdef CONFIG_X86_64
+#define VMW_BP_REG "%%rbp"
+#define VMW_BP_CONSTRAINT "r"
+#else
+#define VMW_BP_REG "%%ebp"
+#define VMW_BP_CONSTRAINT "m"
+#endif
+
 /*
- * The high bandwidth in call. The low word of edx is presumed to have the
- * HB bit set.
+ * High bandwidth calls are not supported on encrypted memory guests.
+ * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
+ * low bandwidth hypercall it memory encryption is set.
+ * This assumption simplifies HB hypercall impementation to just I/O port
+ * based approach without alternative patching.
  */
-#define VMWARE_HYPERCALL_HB_IN						\
-	ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
-		      "rep insb",					\
-		      "vmcall", X86_FEATURE_VMCALL,			\
-		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+				      unsigned long in3, unsigned long in4,
+				      unsigned long in5, unsigned long in6,
+				      uint32_t *out1)
+{
+	unsigned long out0;
+
+	asm_inline volatile (
+		UNWIND_HINT_SAVE
+		"push " VMW_BP_REG "\n\t"
+		UNWIND_HINT_UNDEFINED
+		"mov %[in6], " VMW_BP_REG "\n\t"
+		"rep outsb\n\t"
+		"pop " VMW_BP_REG "\n\t"
+		UNWIND_HINT_RESTORE
+		: "=a" (out0), "=b" (*out1)
+		: "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (cmd),
+		  "c" (in2),
+		  "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+		  "S" (in4),
+		  "D" (in5),
+		  [in6] VMW_BP_CONSTRAINT (in6)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+				     unsigned long in3, unsigned long in4,
+				     unsigned long in5, unsigned long in6,
+				     uint32_t *out1)
+{
+	unsigned long out0;
 
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
-	__asm__("inl (%%dx), %%eax" :					\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) :		\
-		"memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx)				\
-	__asm__("vmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx)				\
-	__asm__("vmmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do {		\
-	switch (vmware_hypercall_mode) {			\
-	case CPUID_VMWARE_FEATURES_ECX_VMCALL:			\
-		VMWARE_VMCALL(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	case CPUID_VMWARE_FEATURES_ECX_VMMCALL:			\
-		VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx);	\
-		break;						\
-	default:						\
-		VMWARE_PORT(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	}							\
-	} while (0)
+	asm_inline volatile (
+		UNWIND_HINT_SAVE
+		"push " VMW_BP_REG "\n\t"
+		UNWIND_HINT_UNDEFINED
+		"mov %[in6], " VMW_BP_REG "\n\t"
+		"rep insb\n\t"
+		"pop " VMW_BP_REG "\n\t"
+		UNWIND_HINT_RESTORE
+		: "=a" (out0), "=b" (*out1)
+		: "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (cmd),
+		  "c" (in2),
+		  "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+		  "S" (in4),
+		  "D" (in5),
+		  [in6] VMW_BP_CONSTRAINT (in6)
+		: "cc", "memory");
+	return out0;
+}
+#undef VMW_BP_REG
+#undef VMW_BP_CONSTRAINT
 
 #endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 4db8e1daa4a1..3aa1adaed18f 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -67,9 +67,10 @@ EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
 
 static inline int __vmware_platform(void)
 {
-	uint32_t eax, ebx, ecx, edx;
-	VMWARE_CMD(GETVERSION, eax, ebx, ecx, edx);
-	return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
+	uint32_t eax, ebx, ecx;
+
+	eax = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &ebx, &ecx);
+	return eax != UINT_MAX && ebx == VMWARE_HYPERVISOR_MAGIC;
 }
 
 static unsigned long vmware_get_tsc_khz(void)
@@ -121,21 +122,12 @@ static void __init vmware_cyc2ns_setup(void)
 	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
-static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+static int vmware_cmd_stealclock(uint32_t addr_hi, uint32_t addr_lo)
 {
-	uint32_t result, info;
-
-	asm volatile (VMWARE_HYPERCALL :
-		"=a"(result),
-		"=c"(info) :
-		"a"(VMWARE_HYPERVISOR_MAGIC),
-		"b"(0),
-		"c"(VMWARE_CMD_STEALCLOCK),
-		"d"(0),
-		"S"(arg1),
-		"D"(arg2) :
-		"memory");
-	return result;
+	uint32_t info;
+
+	return vmware_hypercall5(VMWARE_CMD_STEALCLOCK, 0, 0, addr_hi, addr_lo,
+				 &info);
 }
 
 static bool stealclock_enable(phys_addr_t pa)
@@ -344,10 +336,10 @@ static void __init vmware_set_capabilities(void)
 
 static void __init vmware_platform_setup(void)
 {
-	uint32_t eax, ebx, ecx, edx;
+	uint32_t eax, ebx, ecx;
 	uint64_t lpj, tsc_khz;
 
-	VMWARE_CMD(GETHZ, eax, ebx, ecx, edx);
+	eax = vmware_hypercall3(VMWARE_CMD_GETHZ, UINT_MAX, &ebx, &ecx);
 
 	if (ebx != UINT_MAX) {
 		lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
@@ -429,8 +421,9 @@ static uint32_t __init vmware_platform(void)
 /* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
 static bool __init vmware_legacy_x2apic_available(void)
 {
-	uint32_t eax, ebx, ecx, edx;
-	VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
+	uint32_t eax;
+
+	eax = vmware_hypercall1(VMWARE_CMD_GETVCPU_INFO, 0);
 	return !(eax & BIT(VCPU_RESERVED)) &&
 		(eax & BIT(VCPU_LEGACY_X2APIC));
 }
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index 23899d743a90..e040ee21ea1a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -68,6 +68,8 @@
                 "=d"(edx),			\
                 "=S"(si),			\
                 "=D"(di) :			\
+         [port] "i" (VMWARE_HYPERVISOR_PORT),	\
+         [mode] "m" (vmware_hypercall_mode),	\
                 "a"(magic),			\
                 "b"(in_ebx),			\
                 "c"(cmd),			\
@@ -110,7 +112,7 @@
 		"push %%rbp;"				\
 		UNWIND_HINT_UNDEFINED			\
                 "mov %12, %%rbp;"			\
-                VMWARE_HYPERCALL_HB_OUT			\
+                "rep outsb;"				\
                 "pop %%rbp;"				\
 		UNWIND_HINT_RESTORE :			\
                 "=a"(eax),				\
@@ -139,7 +141,7 @@
 		"push %%rbp;"				\
 		UNWIND_HINT_UNDEFINED			\
                 "mov %12, %%rbp;"			\
-                VMWARE_HYPERCALL_HB_IN			\
+                "rep insb;"				\
                 "pop %%rbp;"				\
 		UNWIND_HINT_RESTORE :			\
                 "=a"(eax),				\
diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ea9eff7c8099..ad94c835ee66 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -91,6 +91,8 @@ struct vmmouse_data {
 		"=d"(out4),				\
 		"=S"(__dummy1),				\
 		"=D"(__dummy2) :			\
+         [port] "i" (VMWARE_HYPERVISOR_PORT),		\
+         [mode] "m" (vmware_hypercall_mode),		\
 		"a"(VMMOUSE_PROTO_MAGIC),		\
 		"b"(in1),				\
 		"c"(VMMOUSE_PROTO_CMD_##cmd),		\
diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 27c5547aa8a9..279d191d2df9 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -29,6 +29,8 @@ static int ptp_vmw_pclk_read(u64 *ns)
 	asm volatile (VMWARE_HYPERCALL :
 		"=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
 		"=S"(unused2), "=D"(unused3) :
+		[port] "i" (VMWARE_HYPERVISOR_PORT),
+		[mode] "m" (vmware_hypercall_mode),
 		"a"(VMWARE_MAGIC), "b"(0),
 		"c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
 		"memory");
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 2/7] x86/vmware: Introduce VMware hypercall API
@ 2024-01-09  8:40   ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

Introduce vmware_hypercall family of functions. It is a common
implementation to be used by the VMware guest code and virtual
device drivers in architecture independent manner.

The API consists of vmware_hypercallX and vmware_hypercall_hb_{out,in}
set of functions by analogy with KVM hypercall API. Architecture
specific implementation is hidden inside.

It will simplify future enhancements in VMware hypercalls such
as SEV-ES and TDX related changes without needs to modify a
caller in device drivers code.

Current implementation extends an idea from commit bac7b4e84323
("x86/vmware: Update platform detection code for VMCALL/VMMCALL
hypercalls") to have a slow, but safe path in VMWARE_HYPERCALL
earlier during the boot when alternatives are not yet applied.
This logic was inherited from VMWARE_CMD from the commit mentioned
above. Default alternative code was optimized by size to reduce
excessive nop alignment once alternatives are applied. Total
default code size is 26 bytes, in worse case (3 bytes alternative)
remaining 23 bytes will be aligned by only 3 long NOP instructions.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Jeff Sipek <jsipek@vmware.com>
---
 arch/x86/include/asm/vmware.h           | 288 +++++++++++++++++++-----
 arch/x86/kernel/cpu/vmware.c            |  35 ++-
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h |   6 +-
 drivers/input/mouse/vmmouse.c           |   2 +
 drivers/ptp/ptp_vmw.c                   |   2 +
 5 files changed, 252 insertions(+), 81 deletions(-)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index de2533337611..2ac87068184a 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -7,14 +7,37 @@
 #include <linux/stringify.h>
 
 /*
- * The hypercall definitions differ in the low word of the %edx argument
+ * VMware hypercall ABI.
+ *
+ * - Low bandwidth (LB) hypercalls (I/O port based, vmcall and vmmcall)
+ * have up to 6 input and 6 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg2 - Hypercall command
+ * arg3 bits [15:0] - Port number, LB and direction flags
+ *
+ * - High bandwidth (HB) hypercalls are I/O port based only. They have
+ * up to 7 input and 7 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5), %ebp (arg6).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg1 - Hypercall command
+ * arg3 bits [15:0] - Port number, HB and direction flags
+ *
+ * For compatibility purposes, x86_64 systems use only lower 32 bits
+ * for input and output arguments.
+ *
+ * The hypercall definitions differ in the low word of the %edx (arg3)
  * in the following way: the old I/O port based interface uses the port
  * number to distinguish between high- and low bandwidth versions, and
  * uses IN/OUT instructions to define transfer direction.
  *
  * The new vmcall interface instead uses a set of flags to select
  * bandwidth mode and transfer direction. The flags should be loaded
- * into %dx by any user and are automatically replaced by the port
+ * into arg3 by any user and are automatically replaced by the port
  * number if the I/O port method is used.
  */
 
@@ -37,69 +60,218 @@
 
 extern u8 vmware_hypercall_mode;
 
-/* The low bandwidth call. The low word of edx is presumed clear. */
-#define VMWARE_HYPERCALL						\
-	ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT) ", %%dx; " \
-		      "inl (%%dx), %%eax",				\
-		      "vmcall", X86_FEATURE_VMCALL,			\
-		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
-
 /*
- * The high bandwidth out call. The low word of edx is presumed to have the
- * HB and OUT bits set.
+ * The low bandwidth call. The low word of %edx is presumed to have OUT bit
+ * set. The high word of %edx may contain input data from the caller.
  */
-#define VMWARE_HYPERCALL_HB_OUT						\
-	ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
-		      "rep outsb",					\
+#define VMWARE_HYPERCALL						\
+	ALTERNATIVE_3("cmpb $"						\
+			__stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL)	\
+			", %[mode]\n\t"					\
+		      "jg 2f\n\t"					\
+		      "je 1f\n\t"					\
+		      "movw %[port], %%dx\n\t"				\
+		      "inl (%%dx), %%eax\n\t"				\
+		      "jmp 3f\n\t"					\
+		      "1: vmmcall\n\t"					\
+		      "jmp 3f\n\t"					\
+		      "2: vmcall\n\t"					\
+		      "3:\n\t",						\
+		      "movw %[port], %%dx\n\t"				\
+		      "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR,	\
 		      "vmcall", X86_FEATURE_VMCALL,			\
 		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
 
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (0)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
+				uint32_t *out1, uint32_t *out2)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=b" (*out1), "=c" (*out2)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (0)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
+				uint32_t *out1, uint32_t *out2,
+				uint32_t *out3)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (0)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out2)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=c" (*out2)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (in3),
+		  "S" (in4),
+		  "D" (in5)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+				unsigned long in3, uint32_t *out2,
+				uint32_t *out3, uint32_t *out4,
+				uint32_t *out5)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
+		  "=D" (*out5)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (in3)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out1,
+				uint32_t *out2, uint32_t *out3)
+{
+	unsigned long out0;
+
+	asm_inline volatile (VMWARE_HYPERCALL
+		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+		: [port] "i" (VMWARE_HYPERVISOR_PORT),
+		  [mode] "m" (vmware_hypercall_mode),
+		  "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (in1),
+		  "c" (cmd),
+		  "d" (in3),
+		  "S" (in4),
+		  "D" (in5)
+		: "cc", "memory");
+	return out0;
+}
+
+
+#ifdef CONFIG_X86_64
+#define VMW_BP_REG "%%rbp"
+#define VMW_BP_CONSTRAINT "r"
+#else
+#define VMW_BP_REG "%%ebp"
+#define VMW_BP_CONSTRAINT "m"
+#endif
+
 /*
- * The high bandwidth in call. The low word of edx is presumed to have the
- * HB bit set.
+ * High bandwidth calls are not supported on encrypted memory guests.
+ * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
+ * low bandwidth hypercall it memory encryption is set.
+ * This assumption simplifies HB hypercall impementation to just I/O port
+ * based approach without alternative patching.
  */
-#define VMWARE_HYPERCALL_HB_IN						\
-	ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
-		      "rep insb",					\
-		      "vmcall", X86_FEATURE_VMCALL,			\
-		      "vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+				      unsigned long in3, unsigned long in4,
+				      unsigned long in5, unsigned long in6,
+				      uint32_t *out1)
+{
+	unsigned long out0;
+
+	asm_inline volatile (
+		UNWIND_HINT_SAVE
+		"push " VMW_BP_REG "\n\t"
+		UNWIND_HINT_UNDEFINED
+		"mov %[in6], " VMW_BP_REG "\n\t"
+		"rep outsb\n\t"
+		"pop " VMW_BP_REG "\n\t"
+		UNWIND_HINT_RESTORE
+		: "=a" (out0), "=b" (*out1)
+		: "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (cmd),
+		  "c" (in2),
+		  "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+		  "S" (in4),
+		  "D" (in5),
+		  [in6] VMW_BP_CONSTRAINT (in6)
+		: "cc", "memory");
+	return out0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+				     unsigned long in3, unsigned long in4,
+				     unsigned long in5, unsigned long in6,
+				     uint32_t *out1)
+{
+	unsigned long out0;
 
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
-	__asm__("inl (%%dx), %%eax" :					\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) :		\
-		"memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx)				\
-	__asm__("vmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx)				\
-	__asm__("vmmcall" :						\
-		"=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) :		\
-		"a"(VMWARE_HYPERVISOR_MAGIC),				\
-		"c"(VMWARE_CMD_##cmd),					\
-		"d"(0), "b"(UINT_MAX) :					\
-		"memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do {		\
-	switch (vmware_hypercall_mode) {			\
-	case CPUID_VMWARE_FEATURES_ECX_VMCALL:			\
-		VMWARE_VMCALL(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	case CPUID_VMWARE_FEATURES_ECX_VMMCALL:			\
-		VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx);	\
-		break;						\
-	default:						\
-		VMWARE_PORT(cmd, eax, ebx, ecx, edx);		\
-		break;						\
-	}							\
-	} while (0)
+	asm_inline volatile (
+		UNWIND_HINT_SAVE
+		"push " VMW_BP_REG "\n\t"
+		UNWIND_HINT_UNDEFINED
+		"mov %[in6], " VMW_BP_REG "\n\t"
+		"rep insb\n\t"
+		"pop " VMW_BP_REG "\n\t"
+		UNWIND_HINT_RESTORE
+		: "=a" (out0), "=b" (*out1)
+		: "a" (VMWARE_HYPERVISOR_MAGIC),
+		  "b" (cmd),
+		  "c" (in2),
+		  "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+		  "S" (in4),
+		  "D" (in5),
+		  [in6] VMW_BP_CONSTRAINT (in6)
+		: "cc", "memory");
+	return out0;
+}
+#undef VMW_BP_REG
+#undef VMW_BP_CONSTRAINT
 
 #endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 4db8e1daa4a1..3aa1adaed18f 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -67,9 +67,10 @@ EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
 
 static inline int __vmware_platform(void)
 {
-	uint32_t eax, ebx, ecx, edx;
-	VMWARE_CMD(GETVERSION, eax, ebx, ecx, edx);
-	return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
+	uint32_t eax, ebx, ecx;
+
+	eax = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &ebx, &ecx);
+	return eax != UINT_MAX && ebx == VMWARE_HYPERVISOR_MAGIC;
 }
 
 static unsigned long vmware_get_tsc_khz(void)
@@ -121,21 +122,12 @@ static void __init vmware_cyc2ns_setup(void)
 	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
-static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+static int vmware_cmd_stealclock(uint32_t addr_hi, uint32_t addr_lo)
 {
-	uint32_t result, info;
-
-	asm volatile (VMWARE_HYPERCALL :
-		"=a"(result),
-		"=c"(info) :
-		"a"(VMWARE_HYPERVISOR_MAGIC),
-		"b"(0),
-		"c"(VMWARE_CMD_STEALCLOCK),
-		"d"(0),
-		"S"(arg1),
-		"D"(arg2) :
-		"memory");
-	return result;
+	uint32_t info;
+
+	return vmware_hypercall5(VMWARE_CMD_STEALCLOCK, 0, 0, addr_hi, addr_lo,
+				 &info);
 }
 
 static bool stealclock_enable(phys_addr_t pa)
@@ -344,10 +336,10 @@ static void __init vmware_set_capabilities(void)
 
 static void __init vmware_platform_setup(void)
 {
-	uint32_t eax, ebx, ecx, edx;
+	uint32_t eax, ebx, ecx;
 	uint64_t lpj, tsc_khz;
 
-	VMWARE_CMD(GETHZ, eax, ebx, ecx, edx);
+	eax = vmware_hypercall3(VMWARE_CMD_GETHZ, UINT_MAX, &ebx, &ecx);
 
 	if (ebx != UINT_MAX) {
 		lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
@@ -429,8 +421,9 @@ static uint32_t __init vmware_platform(void)
 /* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
 static bool __init vmware_legacy_x2apic_available(void)
 {
-	uint32_t eax, ebx, ecx, edx;
-	VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
+	uint32_t eax;
+
+	eax = vmware_hypercall1(VMWARE_CMD_GETVCPU_INFO, 0);
 	return !(eax & BIT(VCPU_RESERVED)) &&
 		(eax & BIT(VCPU_LEGACY_X2APIC));
 }
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index 23899d743a90..e040ee21ea1a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -68,6 +68,8 @@
                 "=d"(edx),			\
                 "=S"(si),			\
                 "=D"(di) :			\
+         [port] "i" (VMWARE_HYPERVISOR_PORT),	\
+         [mode] "m" (vmware_hypercall_mode),	\
                 "a"(magic),			\
                 "b"(in_ebx),			\
                 "c"(cmd),			\
@@ -110,7 +112,7 @@
 		"push %%rbp;"				\
 		UNWIND_HINT_UNDEFINED			\
                 "mov %12, %%rbp;"			\
-                VMWARE_HYPERCALL_HB_OUT			\
+                "rep outsb;"				\
                 "pop %%rbp;"				\
 		UNWIND_HINT_RESTORE :			\
                 "=a"(eax),				\
@@ -139,7 +141,7 @@
 		"push %%rbp;"				\
 		UNWIND_HINT_UNDEFINED			\
                 "mov %12, %%rbp;"			\
-                VMWARE_HYPERCALL_HB_IN			\
+                "rep insb;"				\
                 "pop %%rbp;"				\
 		UNWIND_HINT_RESTORE :			\
                 "=a"(eax),				\
diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ea9eff7c8099..ad94c835ee66 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -91,6 +91,8 @@ struct vmmouse_data {
 		"=d"(out4),				\
 		"=S"(__dummy1),				\
 		"=D"(__dummy2) :			\
+         [port] "i" (VMWARE_HYPERVISOR_PORT),		\
+         [mode] "m" (vmware_hypercall_mode),		\
 		"a"(VMMOUSE_PROTO_MAGIC),		\
 		"b"(in1),				\
 		"c"(VMMOUSE_PROTO_CMD_##cmd),		\
diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 27c5547aa8a9..279d191d2df9 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -29,6 +29,8 @@ static int ptp_vmw_pclk_read(u64 *ns)
 	asm volatile (VMWARE_HYPERCALL :
 		"=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
 		"=S"(unused2), "=D"(unused3) :
+		[port] "i" (VMWARE_HYPERVISOR_PORT),
+		[mode] "m" (vmware_hypercall_mode),
 		"a"(VMWARE_MAGIC), "b"(0),
 		"c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
 		"memory");
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 3/7] ptp/vmware: Use VMware hypercall API
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09  8:40   ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Jeff Sipek <jsipek@vmware.com>
---
 drivers/ptp/ptp_vmw.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 279d191d2df9..e5bb521b9b82 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -14,7 +14,6 @@
 #include <asm/hypervisor.h>
 #include <asm/vmware.h>
 
-#define VMWARE_MAGIC 0x564D5868
 #define VMWARE_CMD_PCLK(nr) ((nr << 16) | 97)
 #define VMWARE_CMD_PCLK_GETTIME VMWARE_CMD_PCLK(0)
 
@@ -24,17 +23,10 @@ static struct ptp_clock *ptp_vmw_clock;
 
 static int ptp_vmw_pclk_read(u64 *ns)
 {
-	u32 ret, nsec_hi, nsec_lo, unused1, unused2, unused3;
-
-	asm volatile (VMWARE_HYPERCALL :
-		"=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
-		"=S"(unused2), "=D"(unused3) :
-		[port] "i" (VMWARE_HYPERVISOR_PORT),
-		[mode] "m" (vmware_hypercall_mode),
-		"a"(VMWARE_MAGIC), "b"(0),
-		"c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
-		"memory");
+	u32 ret, nsec_hi, nsec_lo;
 
+	ret = vmware_hypercall3(VMWARE_CMD_PCLK_GETTIME, 0,
+				&nsec_hi, &nsec_lo);
 	if (ret == 0)
 		*ns = ((u64)nsec_hi << 32) | nsec_lo;
 	return ret;
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 3/7] ptp/vmware: Use VMware hypercall API
@ 2024-01-09  8:40   ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Jeff Sipek <jsipek@vmware.com>
---
 drivers/ptp/ptp_vmw.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 279d191d2df9..e5bb521b9b82 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -14,7 +14,6 @@
 #include <asm/hypervisor.h>
 #include <asm/vmware.h>
 
-#define VMWARE_MAGIC 0x564D5868
 #define VMWARE_CMD_PCLK(nr) ((nr << 16) | 97)
 #define VMWARE_CMD_PCLK_GETTIME VMWARE_CMD_PCLK(0)
 
@@ -24,17 +23,10 @@ static struct ptp_clock *ptp_vmw_clock;
 
 static int ptp_vmw_pclk_read(u64 *ns)
 {
-	u32 ret, nsec_hi, nsec_lo, unused1, unused2, unused3;
-
-	asm volatile (VMWARE_HYPERCALL :
-		"=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
-		"=S"(unused2), "=D"(unused3) :
-		[port] "i" (VMWARE_HYPERVISOR_PORT),
-		[mode] "m" (vmware_hypercall_mode),
-		"a"(VMWARE_MAGIC), "b"(0),
-		"c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
-		"memory");
+	u32 ret, nsec_hi, nsec_lo;
 
+	ret = vmware_hypercall3(VMWARE_CMD_PCLK_GETTIME, 0,
+				&nsec_hi, &nsec_lo);
 	if (ret == 0)
 		*ns = ((u64)nsec_hi << 32) | nsec_lo;
 	return ret;
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 4/7] input/vmmouse: Use VMware hypercall API
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09  8:40   ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/mouse/vmmouse.c | 78 ++++++++++-------------------------
 1 file changed, 22 insertions(+), 56 deletions(-)

diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ad94c835ee66..fb1d986a6895 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -21,19 +21,16 @@
 #include "psmouse.h"
 #include "vmmouse.h"
 
-#define VMMOUSE_PROTO_MAGIC			0x564D5868U
-
 /*
  * Main commands supported by the vmmouse hypervisor port.
  */
-#define VMMOUSE_PROTO_CMD_GETVERSION		10
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_DATA	39
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_STATUS	40
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND	41
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_RESTRICT   86
+#define VMWARE_CMD_ABSPOINTER_DATA	39
+#define VMWARE_CMD_ABSPOINTER_STATUS	40
+#define VMWARE_CMD_ABSPOINTER_COMMAND	41
+#define VMWARE_CMD_ABSPOINTER_RESTRICT	86
 
 /*
- * Subcommands for VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND
+ * Subcommands for VMWARE_CMD_ABSPOINTER_COMMAND
  */
 #define VMMOUSE_CMD_ENABLE			0x45414552U
 #define VMMOUSE_CMD_DISABLE			0x000000f5U
@@ -76,30 +73,6 @@ struct vmmouse_data {
 	char dev_name[128];
 };
 
-/*
- * Hypervisor-specific bi-directional communication channel
- * implementing the vmmouse protocol. Should never execute on
- * bare metal hardware.
- */
-#define VMMOUSE_CMD(cmd, in1, out1, out2, out3, out4)	\
-({							\
-	unsigned long __dummy1, __dummy2;		\
-	__asm__ __volatile__ (VMWARE_HYPERCALL :	\
-		"=a"(out1),				\
-		"=b"(out2),				\
-		"=c"(out3),				\
-		"=d"(out4),				\
-		"=S"(__dummy1),				\
-		"=D"(__dummy2) :			\
-         [port] "i" (VMWARE_HYPERVISOR_PORT),		\
-         [mode] "m" (vmware_hypercall_mode),		\
-		"a"(VMMOUSE_PROTO_MAGIC),		\
-		"b"(in1),				\
-		"c"(VMMOUSE_PROTO_CMD_##cmd),		\
-		"d"(0) :			        \
-		"memory");		                \
-})
-
 /**
  * vmmouse_report_button - report button state on the correct input device
  *
@@ -147,14 +120,12 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
 	struct input_dev *abs_dev = priv->abs_dev;
 	struct input_dev *pref_dev;
 	u32 status, x, y, z;
-	u32 dummy1, dummy2, dummy3;
 	unsigned int queue_length;
 	unsigned int count = 255;
 
 	while (count--) {
 		/* See if we have motion data. */
-		VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
-			    status, dummy1, dummy2, dummy3);
+		status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
 		if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) {
 			psmouse_err(psmouse, "failed to fetch status data\n");
 			/*
@@ -174,7 +145,8 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
 		}
 
 		/* Now get it */
-		VMMOUSE_CMD(ABSPOINTER_DATA, 4, status, x, y, z);
+		status = vmware_hypercall4(VMWARE_CMD_ABSPOINTER_DATA, 4,
+					   &x, &y, &z);
 
 		/*
 		 * And report what we've got. Prefer to report button
@@ -249,14 +221,10 @@ static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse)
 static void vmmouse_disable(struct psmouse *psmouse)
 {
 	u32 status;
-	u32 dummy1, dummy2, dummy3, dummy4;
-
-	VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE,
-		    dummy1, dummy2, dummy3, dummy4);
 
-	VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
-		    status, dummy1, dummy2, dummy3);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE);
 
+	status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
 	if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR)
 		psmouse_warn(psmouse, "failed to disable vmmouse device\n");
 }
@@ -273,26 +241,24 @@ static void vmmouse_disable(struct psmouse *psmouse)
 static int vmmouse_enable(struct psmouse *psmouse)
 {
 	u32 status, version;
-	u32 dummy1, dummy2, dummy3, dummy4;
 
 	/*
 	 * Try enabling the device. If successful, we should be able to
 	 * read valid version ID back from it.
 	 */
-	VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE,
-		    dummy1, dummy2, dummy3, dummy4);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE);
 
 	/*
 	 * See if version ID can be retrieved.
 	 */
-	VMMOUSE_CMD(ABSPOINTER_STATUS, 0, status, dummy1, dummy2, dummy3);
+	status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
 	if ((status & 0x0000ffff) == 0) {
 		psmouse_dbg(psmouse, "empty flags - assuming no device\n");
 		return -ENXIO;
 	}
 
-	VMMOUSE_CMD(ABSPOINTER_DATA, 1 /* single item */,
-		    version, dummy1, dummy2, dummy3);
+	version = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_DATA,
+				    1 /* single item */);
 	if (version != VMMOUSE_VERSION_ID) {
 		psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n",
 			    (unsigned) version, VMMOUSE_VERSION_ID);
@@ -303,11 +269,11 @@ static int vmmouse_enable(struct psmouse *psmouse)
 	/*
 	 * Restrict ioport access, if possible.
 	 */
-	VMMOUSE_CMD(ABSPOINTER_RESTRICT, VMMOUSE_RESTRICT_CPL0,
-		    dummy1, dummy2, dummy3, dummy4);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_RESTRICT,
+			  VMMOUSE_RESTRICT_CPL0);
 
-	VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_REQUEST_ABSOLUTE,
-		    dummy1, dummy2, dummy3, dummy4);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND,
+			  VMMOUSE_CMD_REQUEST_ABSOLUTE);
 
 	return 0;
 }
@@ -344,7 +310,7 @@ static bool vmmouse_check_hypervisor(void)
  */
 int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
 {
-	u32 response, version, dummy1, dummy2;
+	u32 response, version, type;
 
 	if (!vmmouse_check_hypervisor()) {
 		psmouse_dbg(psmouse,
@@ -353,9 +319,9 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
 	}
 
 	/* Check if the device is present */
-	response = ~VMMOUSE_PROTO_MAGIC;
-	VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2);
-	if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU)
+	response = ~VMWARE_HYPERVISOR_MAGIC;
+	version = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &response, &type);
+	if (response != VMWARE_HYPERVISOR_MAGIC || version == 0xffffffffU)
 		return -ENXIO;
 
 	if (set_properties) {
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 4/7] input/vmmouse: Use VMware hypercall API
@ 2024-01-09  8:40   ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/mouse/vmmouse.c | 78 ++++++++++-------------------------
 1 file changed, 22 insertions(+), 56 deletions(-)

diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ad94c835ee66..fb1d986a6895 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -21,19 +21,16 @@
 #include "psmouse.h"
 #include "vmmouse.h"
 
-#define VMMOUSE_PROTO_MAGIC			0x564D5868U
-
 /*
  * Main commands supported by the vmmouse hypervisor port.
  */
-#define VMMOUSE_PROTO_CMD_GETVERSION		10
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_DATA	39
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_STATUS	40
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND	41
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_RESTRICT   86
+#define VMWARE_CMD_ABSPOINTER_DATA	39
+#define VMWARE_CMD_ABSPOINTER_STATUS	40
+#define VMWARE_CMD_ABSPOINTER_COMMAND	41
+#define VMWARE_CMD_ABSPOINTER_RESTRICT	86
 
 /*
- * Subcommands for VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND
+ * Subcommands for VMWARE_CMD_ABSPOINTER_COMMAND
  */
 #define VMMOUSE_CMD_ENABLE			0x45414552U
 #define VMMOUSE_CMD_DISABLE			0x000000f5U
@@ -76,30 +73,6 @@ struct vmmouse_data {
 	char dev_name[128];
 };
 
-/*
- * Hypervisor-specific bi-directional communication channel
- * implementing the vmmouse protocol. Should never execute on
- * bare metal hardware.
- */
-#define VMMOUSE_CMD(cmd, in1, out1, out2, out3, out4)	\
-({							\
-	unsigned long __dummy1, __dummy2;		\
-	__asm__ __volatile__ (VMWARE_HYPERCALL :	\
-		"=a"(out1),				\
-		"=b"(out2),				\
-		"=c"(out3),				\
-		"=d"(out4),				\
-		"=S"(__dummy1),				\
-		"=D"(__dummy2) :			\
-         [port] "i" (VMWARE_HYPERVISOR_PORT),		\
-         [mode] "m" (vmware_hypercall_mode),		\
-		"a"(VMMOUSE_PROTO_MAGIC),		\
-		"b"(in1),				\
-		"c"(VMMOUSE_PROTO_CMD_##cmd),		\
-		"d"(0) :			        \
-		"memory");		                \
-})
-
 /**
  * vmmouse_report_button - report button state on the correct input device
  *
@@ -147,14 +120,12 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
 	struct input_dev *abs_dev = priv->abs_dev;
 	struct input_dev *pref_dev;
 	u32 status, x, y, z;
-	u32 dummy1, dummy2, dummy3;
 	unsigned int queue_length;
 	unsigned int count = 255;
 
 	while (count--) {
 		/* See if we have motion data. */
-		VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
-			    status, dummy1, dummy2, dummy3);
+		status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
 		if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) {
 			psmouse_err(psmouse, "failed to fetch status data\n");
 			/*
@@ -174,7 +145,8 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
 		}
 
 		/* Now get it */
-		VMMOUSE_CMD(ABSPOINTER_DATA, 4, status, x, y, z);
+		status = vmware_hypercall4(VMWARE_CMD_ABSPOINTER_DATA, 4,
+					   &x, &y, &z);
 
 		/*
 		 * And report what we've got. Prefer to report button
@@ -249,14 +221,10 @@ static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse)
 static void vmmouse_disable(struct psmouse *psmouse)
 {
 	u32 status;
-	u32 dummy1, dummy2, dummy3, dummy4;
-
-	VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE,
-		    dummy1, dummy2, dummy3, dummy4);
 
-	VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
-		    status, dummy1, dummy2, dummy3);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE);
 
+	status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
 	if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR)
 		psmouse_warn(psmouse, "failed to disable vmmouse device\n");
 }
@@ -273,26 +241,24 @@ static void vmmouse_disable(struct psmouse *psmouse)
 static int vmmouse_enable(struct psmouse *psmouse)
 {
 	u32 status, version;
-	u32 dummy1, dummy2, dummy3, dummy4;
 
 	/*
 	 * Try enabling the device. If successful, we should be able to
 	 * read valid version ID back from it.
 	 */
-	VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE,
-		    dummy1, dummy2, dummy3, dummy4);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE);
 
 	/*
 	 * See if version ID can be retrieved.
 	 */
-	VMMOUSE_CMD(ABSPOINTER_STATUS, 0, status, dummy1, dummy2, dummy3);
+	status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
 	if ((status & 0x0000ffff) == 0) {
 		psmouse_dbg(psmouse, "empty flags - assuming no device\n");
 		return -ENXIO;
 	}
 
-	VMMOUSE_CMD(ABSPOINTER_DATA, 1 /* single item */,
-		    version, dummy1, dummy2, dummy3);
+	version = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_DATA,
+				    1 /* single item */);
 	if (version != VMMOUSE_VERSION_ID) {
 		psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n",
 			    (unsigned) version, VMMOUSE_VERSION_ID);
@@ -303,11 +269,11 @@ static int vmmouse_enable(struct psmouse *psmouse)
 	/*
 	 * Restrict ioport access, if possible.
 	 */
-	VMMOUSE_CMD(ABSPOINTER_RESTRICT, VMMOUSE_RESTRICT_CPL0,
-		    dummy1, dummy2, dummy3, dummy4);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_RESTRICT,
+			  VMMOUSE_RESTRICT_CPL0);
 
-	VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_REQUEST_ABSOLUTE,
-		    dummy1, dummy2, dummy3, dummy4);
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND,
+			  VMMOUSE_CMD_REQUEST_ABSOLUTE);
 
 	return 0;
 }
@@ -344,7 +310,7 @@ static bool vmmouse_check_hypervisor(void)
  */
 int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
 {
-	u32 response, version, dummy1, dummy2;
+	u32 response, version, type;
 
 	if (!vmmouse_check_hypervisor()) {
 		psmouse_dbg(psmouse,
@@ -353,9 +319,9 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
 	}
 
 	/* Check if the device is present */
-	response = ~VMMOUSE_PROTO_MAGIC;
-	VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2);
-	if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU)
+	response = ~VMWARE_HYPERVISOR_MAGIC;
+	version = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &response, &type);
+	if (response != VMWARE_HYPERVISOR_MAGIC || version == 0xffffffffU)
 		return -ENXIO;
 
 	if (set_properties) {
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 5/7] drm/vmwgfx: Use VMware hypercall API
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09  8:40   ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code.

drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant
of vmware_hypercall. And keep it here until introduction of ARM64
VMWare hypervisor interface.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_msg.c       | 173 +++++++------------
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++++++++-------
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h   | 187 --------------------
 3 files changed, 197 insertions(+), 360 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
index 2651fe0ef518..1f15990d3934 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
@@ -48,8 +48,6 @@
 
 #define RETRIES                 3
 
-#define VMW_HYPERVISOR_MAGIC    0x564D5868
-
 #define VMW_PORT_CMD_MSG        30
 #define VMW_PORT_CMD_HB_MSG     0
 #define VMW_PORT_CMD_OPEN_CHANNEL  (MSG_TYPE_OPEN << 16 | VMW_PORT_CMD_MSG)
@@ -104,20 +102,18 @@ static const char* const mksstat_kern_name_desc[MKSSTAT_KERN_COUNT][2] =
  */
 static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
+	u32 ecx, edx, esi, edi;
 
-	VMW_PORT(VMW_PORT_CMD_OPEN_CHANNEL,
-		(protocol | GUESTMSG_FLAG_COOKIE), si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall6(VMW_PORT_CMD_OPEN_CHANNEL,
+			  (protocol | GUESTMSG_FLAG_COOKIE), 0,
+			  &ecx, &edx, &esi, &edi);
 
 	if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
 		return -EINVAL;
 
 	channel->channel_id  = HIGH_WORD(edx);
-	channel->cookie_high = si;
-	channel->cookie_low  = di;
+	channel->cookie_high = esi;
+	channel->cookie_low  = edi;
 
 	return 0;
 }
@@ -133,17 +129,13 @@ static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
  */
 static int vmw_close_channel(struct rpc_channel *channel)
 {
-	unsigned long eax, ebx, ecx, edx, si, di;
-
-	/* Set up additional parameters */
-	si  = channel->cookie_high;
-	di  = channel->cookie_low;
+	u32 ecx;
 
-	VMW_PORT(VMW_PORT_CMD_CLOSE_CHANNEL,
-		0, si, di,
-		channel->channel_id << 16,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall5(VMW_PORT_CMD_CLOSE_CHANNEL,
+			  0, channel->channel_id << 16,
+			  channel->cookie_high,
+			  channel->cookie_low,
+			  &ecx);
 
 	if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
 		return -EINVAL;
@@ -163,24 +155,18 @@ static int vmw_close_channel(struct rpc_channel *channel)
 static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
 				     const char *msg, bool hb)
 {
-	unsigned long si, di, eax, ebx, ecx, edx;
+	u32 ebx, ecx;
 	unsigned long msg_len = strlen(msg);
 
 	/* HB port can't access encrypted memory. */
 	if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
-		unsigned long bp = channel->cookie_high;
-		u32 channel_id = (channel->channel_id << 16);
-
-		si = (uintptr_t) msg;
-		di = channel->cookie_low;
-
-		VMW_PORT_HB_OUT(
+		vmware_hypercall_hb_out(
 			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
-			msg_len, si, di,
-			VMWARE_HYPERVISOR_HB | channel_id |
-			VMWARE_HYPERVISOR_OUT,
-			VMW_HYPERVISOR_MAGIC, bp,
-			eax, ebx, ecx, edx, si, di);
+			msg_len,
+			channel->channel_id << 16,
+			(uintptr_t) msg, channel->cookie_low,
+			channel->cookie_high,
+			&ebx);
 
 		return ebx;
 	}
@@ -194,14 +180,13 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
 		memcpy(&word, msg, bytes);
 		msg_len -= bytes;
 		msg += bytes;
-		si = channel->cookie_high;
-		di = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_SENDPAYLOAD << 16),
-			 word, si, di,
-			 channel->channel_id << 16,
-			 VMW_HYPERVISOR_MAGIC,
-			 eax, ebx, ecx, edx, si, di);
+
+		vmware_hypercall5(VMW_PORT_CMD_MSG |
+				  (MSG_TYPE_SENDPAYLOAD << 16),
+				  word, channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ecx);
 	}
 
 	return ecx;
@@ -220,22 +205,17 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
 static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
 				    unsigned long reply_len, bool hb)
 {
-	unsigned long si, di, eax, ebx, ecx, edx;
+	u32 ebx, ecx, edx;
 
 	/* HB port can't access encrypted memory */
 	if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
-		unsigned long bp = channel->cookie_low;
-		u32 channel_id = (channel->channel_id << 16);
-
-		si = channel->cookie_high;
-		di = (uintptr_t) reply;
-
-		VMW_PORT_HB_IN(
+		vmware_hypercall_hb_in(
 			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
-			reply_len, si, di,
-			VMWARE_HYPERVISOR_HB | channel_id,
-			VMW_HYPERVISOR_MAGIC, bp,
-			eax, ebx, ecx, edx, si, di);
+			reply_len,
+			channel->channel_id << 16,
+			channel->cookie_high,
+			(uintptr_t) reply, channel->cookie_low,
+			&ebx);
 
 		return ebx;
 	}
@@ -245,14 +225,13 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
 	while (reply_len) {
 		unsigned int bytes = min_t(unsigned long, reply_len, 4);
 
-		si = channel->cookie_high;
-		di = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_RECVPAYLOAD << 16),
-			 MESSAGE_STATUS_SUCCESS, si, di,
-			 channel->channel_id << 16,
-			 VMW_HYPERVISOR_MAGIC,
-			 eax, ebx, ecx, edx, si, di);
+		vmware_hypercall7(VMW_PORT_CMD_MSG |
+				  (MSG_TYPE_RECVPAYLOAD << 16),
+				  MESSAGE_STATUS_SUCCESS,
+				  channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ebx, &ecx, &edx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
 			break;
@@ -276,22 +255,18 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
  */
 static int vmw_send_msg(struct rpc_channel *channel, const char *msg)
 {
-	unsigned long eax, ebx, ecx, edx, si, di;
+	u32 ebx, ecx;
 	size_t msg_len = strlen(msg);
 	int retries = 0;
 
 	while (retries < RETRIES) {
 		retries++;
 
-		/* Set up additional parameters */
-		si  = channel->cookie_high;
-		di  = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_SENDSIZE,
-			msg_len, si, di,
-			channel->channel_id << 16,
-			VMW_HYPERVISOR_MAGIC,
-			eax, ebx, ecx, edx, si, di);
+		vmware_hypercall5(VMW_PORT_CMD_SENDSIZE,
+				  msg_len, channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ecx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			/* Expected success. Give up. */
@@ -329,7 +304,7 @@ STACK_FRAME_NON_STANDARD(vmw_send_msg);
 static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
 			size_t *msg_len)
 {
-	unsigned long eax, ebx, ecx, edx, si, di;
+	u32 ebx, ecx, edx;
 	char *reply;
 	size_t reply_len;
 	int retries = 0;
@@ -341,15 +316,11 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
 	while (retries < RETRIES) {
 		retries++;
 
-		/* Set up additional parameters */
-		si  = channel->cookie_high;
-		di  = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_RECVSIZE,
-			0, si, di,
-			channel->channel_id << 16,
-			VMW_HYPERVISOR_MAGIC,
-			eax, ebx, ecx, edx, si, di);
+		vmware_hypercall7(VMW_PORT_CMD_RECVSIZE,
+				  0, channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ebx, &ecx, &edx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			DRM_ERROR("Failed to get reply size for host message.\n");
@@ -384,16 +355,12 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
 
 		reply[reply_len] = '\0';
 
-
-		/* Ack buffer */
-		si  = channel->cookie_high;
-		di  = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_RECVSTATUS,
-			MESSAGE_STATUS_SUCCESS, si, di,
-			channel->channel_id << 16,
-			VMW_HYPERVISOR_MAGIC,
-			eax, ebx, ecx, edx, si, di);
+		vmware_hypercall5(VMW_PORT_CMD_RECVSTATUS,
+				  MESSAGE_STATUS_SUCCESS,
+				  channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ecx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			kfree(reply);
@@ -652,13 +619,7 @@ static inline void reset_ppn_array(PPN64 *arr, size_t size)
  */
 static inline void hypervisor_ppn_reset_all(void)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
-	VMW_PORT(VMW_PORT_CMD_MKSGS_RESET,
-		0, si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall1(VMW_PORT_CMD_MKSGS_RESET, 0);
 }
 
 /**
@@ -669,13 +630,7 @@ static inline void hypervisor_ppn_reset_all(void)
  */
 static inline void hypervisor_ppn_add(PPN64 pfn)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
-	VMW_PORT(VMW_PORT_CMD_MKSGS_ADD_PPN,
-		(unsigned long)pfn, si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall1(VMW_PORT_CMD_MKSGS_ADD_PPN, (unsigned long)pfn);
 }
 
 /**
@@ -686,13 +641,7 @@ static inline void hypervisor_ppn_add(PPN64 pfn)
  */
 static inline void hypervisor_ppn_remove(PPN64 pfn)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
-	VMW_PORT(VMW_PORT_CMD_MKSGS_REMOVE_PPN,
-		(unsigned long)pfn, si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall1(VMW_PORT_CMD_MKSGS_REMOVE_PPN, (unsigned long)pfn);
 }
 
 #if IS_ENABLED(CONFIG_DRM_VMWGFX_MKSSTATS)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
index 4f40167ad61f..29bd0af83038 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
@@ -34,6 +34,8 @@
 #define VMWARE_HYPERVISOR_HB  BIT(0)
 #define VMWARE_HYPERVISOR_OUT BIT(1)
 
+#define VMWARE_HYPERVISOR_MAGIC	0x564D5868
+
 #define X86_IO_MAGIC 0x86
 
 #define X86_IO_W7_SIZE_SHIFT 0
@@ -45,86 +47,159 @@
 #define X86_IO_W7_IMM_SHIFT  5
 #define X86_IO_W7_IMM_MASK  (0xff << X86_IO_W7_IMM_SHIFT)
 
-static inline void vmw_port(unsigned long cmd, unsigned long in_ebx,
-			    unsigned long in_si, unsigned long in_di,
-			    unsigned long flags, unsigned long magic,
-			    unsigned long *eax, unsigned long *ebx,
-			    unsigned long *ecx, unsigned long *edx,
-			    unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
 {
-	register u64 x0 asm("x0") = magic;
-	register u64 x1 asm("x1") = in_ebx;
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
 	register u64 x2 asm("x2") = cmd;
-	register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT;
-	register u64 x4 asm("x4") = in_si;
-	register u64 x5 asm("x5") = in_di;
+	register u64 x3 asm("x3") = VMWARE_HYPERVISOR_PORT;
+	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+				    X86_IO_W7_WITH |
+				    X86_IO_W7_DIR |
+				    (2 << X86_IO_W7_SIZE_SHIFT);
 
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0)
+		: "r" (x1), "r" (x2), "r" (x3), "r" (x7)
+		: "memory");
+
+	return x0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out2)
+{
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
+	register u64 x2 asm("x2") = cmd;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+	register u64 x4 asm("x4") = in4;
+	register u64 x5 asm("x5") = in5;
 	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
 				    X86_IO_W7_WITH |
 				    X86_IO_W7_DIR |
 				    (2 << X86_IO_W7_SIZE_SHIFT);
 
-	asm volatile("mrs xzr, mdccsr_el0 \n\t"
-		     : "+r"(x0), "+r"(x1), "+r"(x2),
-		       "+r"(x3), "+r"(x4), "+r"(x5)
-		     : "r"(x7)
-		     :);
-	*eax = x0;
-	*ebx = x1;
-	*ecx = x2;
-	*edx = x3;
-	*si = x4;
-	*di = x5;
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x2)
+		: "r" (x1), "r" (x3), "r" (x4), "r" (x5), "r" (x7)
+		: "memory");
+
+	*out2 = x2;
+	return x0;
 }
 
-static inline void vmw_port_hb(unsigned long cmd, unsigned long in_ecx,
-			       unsigned long in_si, unsigned long in_di,
-			       unsigned long flags, unsigned long magic,
-			       unsigned long bp, u32 w7dir,
-			       unsigned long *eax, unsigned long *ebx,
-			       unsigned long *ecx, unsigned long *edx,
-			       unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+				unsigned long in3, uint32_t *out2,
+				uint32_t *out3, uint32_t *out4,
+				uint32_t *out5)
 {
-	register u64 x0 asm("x0") = magic;
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
+	register u64 x2 asm("x2") = cmd;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+	register u64 x4 asm("x4");
+	register u64 x5 asm("x5");
+	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+				    X86_IO_W7_WITH |
+				    X86_IO_W7_DIR |
+				    (2 << X86_IO_W7_SIZE_SHIFT);
+
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x2), "+r" (x3), "=r" (x4), "=r" (x5)
+		: "r" (x1), "r" (x7)
+		: "memory");
+
+	*out2 = x2;
+	*out3 = x3;
+	*out4 = x4;
+	*out5 = x5;
+	return x0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out1,
+				uint32_t *out2, uint32_t *out3)
+{
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
+	register u64 x2 asm("x2") = cmd;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+	register u64 x4 asm("x4") = in4;
+	register u64 x5 asm("x5") = in5;
+	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+				    X86_IO_W7_WITH |
+				    X86_IO_W7_DIR |
+				    (2 << X86_IO_W7_SIZE_SHIFT);
+
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x1), "+r" (x2), "+r" (x3)
+		: "r" (x4), "r" (x5), "r" (x7)
+		: "memory");
+
+	*out1 = x1;
+	*out2 = x2;
+	*out3 = x3;
+	return x0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb(unsigned long cmd, unsigned long in2,
+				  unsigned long in3, unsigned long in4,
+				  unsigned long in5, unsigned long in6,
+				  uint32_t *out1, int dir)
+{
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
 	register u64 x1 asm("x1") = cmd;
-	register u64 x2 asm("x2") = in_ecx;
-	register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT_HB;
-	register u64 x4 asm("x4") = in_si;
-	register u64 x5 asm("x5") = in_di;
-	register u64 x6 asm("x6") = bp;
+	register u64 x2 asm("x2") = in2;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT_HB;
+	register u64 x4 asm("x4") = in4;
+	register u64 x5 asm("x5") = in5;
+	register u64 x6 asm("x6") = in6;
 	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
 				    X86_IO_W7_STR |
 				    X86_IO_W7_WITH |
-				    w7dir;
-
-	asm volatile("mrs xzr, mdccsr_el0 \n\t"
-		     : "+r"(x0), "+r"(x1), "+r"(x2),
-		       "+r"(x3), "+r"(x4), "+r"(x5)
-		     : "r"(x6), "r"(x7)
-		     :);
-	*eax = x0;
-	*ebx = x1;
-	*ecx = x2;
-	*edx = x3;
-	*si  = x4;
-	*di  = x5;
-}
+				    dir;
 
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, flags, magic, eax, ebx, ecx, edx,  \
-		 si, di)                                                       \
-	vmw_port(cmd, in_ebx, in_si, in_di, flags, magic, &eax, &ebx, &ecx,    \
-		 &edx, &si, &di)
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x1)
+		: "r" (x2), "r" (x3), "r" (x4), "r" (x5),
+		  "r" (x6), "r" (x7)
+		: "memory");
 
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
-		        ecx, edx, si, di)                                      \
-	vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp,               \
-                    0, &eax, &ebx, &ecx, &edx, &si, &di)
+	*out1 = x1;
+	return x0;
+}
 
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx,  \
-		       ecx, edx, si, di)                                       \
-	vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp,               \
-		    X86_IO_W7_DIR, &eax, &ebx, &ecx, &edx, &si, &di)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+				      unsigned long in3, unsigned long in4,
+				      unsigned long in5, unsigned long in6,
+				      uint32_t *out1)
+{
+	return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1, 0);
+}
 
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+				     unsigned long in3, unsigned long in4,
+				     unsigned long in5, unsigned long in6,
+				     uint32_t *out1)
+{
+	return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6,  out1,
+				   X86_IO_W7_DIR);
+}
 #endif
 
 #endif /* _VMWGFX_MSG_ARM64_H */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index e040ee21ea1a..13304d34cc6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -37,193 +37,6 @@
 
 #include <asm/vmware.h>
 
-/**
- * Hypervisor-specific bi-directional communication channel.  Should never
- * execute on bare metal hardware.  The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last two parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ebx: [IN] Message Len, through EBX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set ot 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si:  [OUT]
- * @di:  [OUT]
- */
-#define VMW_PORT(cmd, in_ebx, in_si, in_di,	\
-                 flags, magic,		\
-                 eax, ebx, ecx, edx, si, di)	\
-({						\
-        asm volatile (VMWARE_HYPERCALL :	\
-                "=a"(eax),			\
-                "=b"(ebx),			\
-                "=c"(ecx),			\
-                "=d"(edx),			\
-                "=S"(si),			\
-                "=D"(di) :			\
-         [port] "i" (VMWARE_HYPERVISOR_PORT),	\
-         [mode] "m" (vmware_hypercall_mode),	\
-                "a"(magic),			\
-                "b"(in_ebx),			\
-                "c"(cmd),			\
-                "d"(flags),			\
-                "S"(in_si),			\
-                "D"(in_di) :			\
-                "memory");			\
-})
-
-
-/**
- * Hypervisor-specific bi-directional communication channel.  Should never
- * execute on bare metal hardware.  The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last 3 parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ecx: [IN] Message Len, through ECX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set to 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @bp:  [IN]
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si:  [OUT]
- * @di:  [OUT]
- */
-#ifdef __x86_64__
-
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di,	\
-                        flags, magic, bp,		\
-                        eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile (					\
-		UNWIND_HINT_SAVE			\
-		"push %%rbp;"				\
-		UNWIND_HINT_UNDEFINED			\
-                "mov %12, %%rbp;"			\
-                "rep outsb;"				\
-                "pop %%rbp;"				\
-		UNWIND_HINT_RESTORE :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "r"(bp) :				\
-                "memory", "cc");			\
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di,	\
-                       flags, magic, bp,		\
-                       eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile (					\
-		UNWIND_HINT_SAVE			\
-		"push %%rbp;"				\
-		UNWIND_HINT_UNDEFINED			\
-                "mov %12, %%rbp;"			\
-                "rep insb;"				\
-                "pop %%rbp;"				\
-		UNWIND_HINT_RESTORE :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "r"(bp) :				\
-                "memory", "cc");			\
-})
-
-#elif defined(__i386__)
-
-/*
- * In the 32-bit version of this macro, we store bp in a memory location
- * because we've ran out of registers.
- * Now we can't reference that memory location while we've modified
- * %esp or %ebp, so we first push it on the stack, just before we push
- * %ebp, and then when we need it we read it from the stack where we
- * just pushed it.
- */
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di,	\
-                        flags, magic, bp,		\
-                        eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile ("push %12;"			\
-                "push %%ebp;"				\
-                "mov 0x04(%%esp), %%ebp;"		\
-                VMWARE_HYPERCALL_HB_OUT			\
-                "pop %%ebp;"				\
-                "add $0x04, %%esp;" :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "m"(bp) :				\
-                "memory", "cc");			\
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di,	\
-                       flags, magic, bp,		\
-                       eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile ("push %12;"			\
-                "push %%ebp;"				\
-                "mov 0x04(%%esp), %%ebp;"		\
-                VMWARE_HYPERCALL_HB_IN			\
-                "pop %%ebp;"				\
-                "add $0x04, %%esp;" :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "m"(bp) :				\
-                "memory", "cc");			\
-})
-#endif /* defined(__i386__) */
-
 #endif /* defined(__i386__) || defined(__x86_64__) */
 
 #endif /* _VMWGFX_MSG_X86_H */
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 5/7] drm/vmwgfx: Use VMware hypercall API
@ 2024-01-09  8:40   ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code.

drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant
of vmware_hypercall. And keep it here until introduction of ARM64
VMWare hypervisor interface.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_msg.c       | 173 +++++++------------
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++++++++-------
 drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h   | 187 --------------------
 3 files changed, 197 insertions(+), 360 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
index 2651fe0ef518..1f15990d3934 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
@@ -48,8 +48,6 @@
 
 #define RETRIES                 3
 
-#define VMW_HYPERVISOR_MAGIC    0x564D5868
-
 #define VMW_PORT_CMD_MSG        30
 #define VMW_PORT_CMD_HB_MSG     0
 #define VMW_PORT_CMD_OPEN_CHANNEL  (MSG_TYPE_OPEN << 16 | VMW_PORT_CMD_MSG)
@@ -104,20 +102,18 @@ static const char* const mksstat_kern_name_desc[MKSSTAT_KERN_COUNT][2] =
  */
 static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
+	u32 ecx, edx, esi, edi;
 
-	VMW_PORT(VMW_PORT_CMD_OPEN_CHANNEL,
-		(protocol | GUESTMSG_FLAG_COOKIE), si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall6(VMW_PORT_CMD_OPEN_CHANNEL,
+			  (protocol | GUESTMSG_FLAG_COOKIE), 0,
+			  &ecx, &edx, &esi, &edi);
 
 	if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
 		return -EINVAL;
 
 	channel->channel_id  = HIGH_WORD(edx);
-	channel->cookie_high = si;
-	channel->cookie_low  = di;
+	channel->cookie_high = esi;
+	channel->cookie_low  = edi;
 
 	return 0;
 }
@@ -133,17 +129,13 @@ static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
  */
 static int vmw_close_channel(struct rpc_channel *channel)
 {
-	unsigned long eax, ebx, ecx, edx, si, di;
-
-	/* Set up additional parameters */
-	si  = channel->cookie_high;
-	di  = channel->cookie_low;
+	u32 ecx;
 
-	VMW_PORT(VMW_PORT_CMD_CLOSE_CHANNEL,
-		0, si, di,
-		channel->channel_id << 16,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall5(VMW_PORT_CMD_CLOSE_CHANNEL,
+			  0, channel->channel_id << 16,
+			  channel->cookie_high,
+			  channel->cookie_low,
+			  &ecx);
 
 	if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
 		return -EINVAL;
@@ -163,24 +155,18 @@ static int vmw_close_channel(struct rpc_channel *channel)
 static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
 				     const char *msg, bool hb)
 {
-	unsigned long si, di, eax, ebx, ecx, edx;
+	u32 ebx, ecx;
 	unsigned long msg_len = strlen(msg);
 
 	/* HB port can't access encrypted memory. */
 	if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
-		unsigned long bp = channel->cookie_high;
-		u32 channel_id = (channel->channel_id << 16);
-
-		si = (uintptr_t) msg;
-		di = channel->cookie_low;
-
-		VMW_PORT_HB_OUT(
+		vmware_hypercall_hb_out(
 			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
-			msg_len, si, di,
-			VMWARE_HYPERVISOR_HB | channel_id |
-			VMWARE_HYPERVISOR_OUT,
-			VMW_HYPERVISOR_MAGIC, bp,
-			eax, ebx, ecx, edx, si, di);
+			msg_len,
+			channel->channel_id << 16,
+			(uintptr_t) msg, channel->cookie_low,
+			channel->cookie_high,
+			&ebx);
 
 		return ebx;
 	}
@@ -194,14 +180,13 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
 		memcpy(&word, msg, bytes);
 		msg_len -= bytes;
 		msg += bytes;
-		si = channel->cookie_high;
-		di = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_SENDPAYLOAD << 16),
-			 word, si, di,
-			 channel->channel_id << 16,
-			 VMW_HYPERVISOR_MAGIC,
-			 eax, ebx, ecx, edx, si, di);
+
+		vmware_hypercall5(VMW_PORT_CMD_MSG |
+				  (MSG_TYPE_SENDPAYLOAD << 16),
+				  word, channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ecx);
 	}
 
 	return ecx;
@@ -220,22 +205,17 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
 static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
 				    unsigned long reply_len, bool hb)
 {
-	unsigned long si, di, eax, ebx, ecx, edx;
+	u32 ebx, ecx, edx;
 
 	/* HB port can't access encrypted memory */
 	if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
-		unsigned long bp = channel->cookie_low;
-		u32 channel_id = (channel->channel_id << 16);
-
-		si = channel->cookie_high;
-		di = (uintptr_t) reply;
-
-		VMW_PORT_HB_IN(
+		vmware_hypercall_hb_in(
 			(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
-			reply_len, si, di,
-			VMWARE_HYPERVISOR_HB | channel_id,
-			VMW_HYPERVISOR_MAGIC, bp,
-			eax, ebx, ecx, edx, si, di);
+			reply_len,
+			channel->channel_id << 16,
+			channel->cookie_high,
+			(uintptr_t) reply, channel->cookie_low,
+			&ebx);
 
 		return ebx;
 	}
@@ -245,14 +225,13 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
 	while (reply_len) {
 		unsigned int bytes = min_t(unsigned long, reply_len, 4);
 
-		si = channel->cookie_high;
-		di = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_RECVPAYLOAD << 16),
-			 MESSAGE_STATUS_SUCCESS, si, di,
-			 channel->channel_id << 16,
-			 VMW_HYPERVISOR_MAGIC,
-			 eax, ebx, ecx, edx, si, di);
+		vmware_hypercall7(VMW_PORT_CMD_MSG |
+				  (MSG_TYPE_RECVPAYLOAD << 16),
+				  MESSAGE_STATUS_SUCCESS,
+				  channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ebx, &ecx, &edx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
 			break;
@@ -276,22 +255,18 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
  */
 static int vmw_send_msg(struct rpc_channel *channel, const char *msg)
 {
-	unsigned long eax, ebx, ecx, edx, si, di;
+	u32 ebx, ecx;
 	size_t msg_len = strlen(msg);
 	int retries = 0;
 
 	while (retries < RETRIES) {
 		retries++;
 
-		/* Set up additional parameters */
-		si  = channel->cookie_high;
-		di  = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_SENDSIZE,
-			msg_len, si, di,
-			channel->channel_id << 16,
-			VMW_HYPERVISOR_MAGIC,
-			eax, ebx, ecx, edx, si, di);
+		vmware_hypercall5(VMW_PORT_CMD_SENDSIZE,
+				  msg_len, channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ecx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			/* Expected success. Give up. */
@@ -329,7 +304,7 @@ STACK_FRAME_NON_STANDARD(vmw_send_msg);
 static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
 			size_t *msg_len)
 {
-	unsigned long eax, ebx, ecx, edx, si, di;
+	u32 ebx, ecx, edx;
 	char *reply;
 	size_t reply_len;
 	int retries = 0;
@@ -341,15 +316,11 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
 	while (retries < RETRIES) {
 		retries++;
 
-		/* Set up additional parameters */
-		si  = channel->cookie_high;
-		di  = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_RECVSIZE,
-			0, si, di,
-			channel->channel_id << 16,
-			VMW_HYPERVISOR_MAGIC,
-			eax, ebx, ecx, edx, si, di);
+		vmware_hypercall7(VMW_PORT_CMD_RECVSIZE,
+				  0, channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ebx, &ecx, &edx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			DRM_ERROR("Failed to get reply size for host message.\n");
@@ -384,16 +355,12 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
 
 		reply[reply_len] = '\0';
 
-
-		/* Ack buffer */
-		si  = channel->cookie_high;
-		di  = channel->cookie_low;
-
-		VMW_PORT(VMW_PORT_CMD_RECVSTATUS,
-			MESSAGE_STATUS_SUCCESS, si, di,
-			channel->channel_id << 16,
-			VMW_HYPERVISOR_MAGIC,
-			eax, ebx, ecx, edx, si, di);
+		vmware_hypercall5(VMW_PORT_CMD_RECVSTATUS,
+				  MESSAGE_STATUS_SUCCESS,
+				  channel->channel_id << 16,
+				  channel->cookie_high,
+				  channel->cookie_low,
+				  &ecx);
 
 		if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
 			kfree(reply);
@@ -652,13 +619,7 @@ static inline void reset_ppn_array(PPN64 *arr, size_t size)
  */
 static inline void hypervisor_ppn_reset_all(void)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
-	VMW_PORT(VMW_PORT_CMD_MKSGS_RESET,
-		0, si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall1(VMW_PORT_CMD_MKSGS_RESET, 0);
 }
 
 /**
@@ -669,13 +630,7 @@ static inline void hypervisor_ppn_reset_all(void)
  */
 static inline void hypervisor_ppn_add(PPN64 pfn)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
-	VMW_PORT(VMW_PORT_CMD_MKSGS_ADD_PPN,
-		(unsigned long)pfn, si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall1(VMW_PORT_CMD_MKSGS_ADD_PPN, (unsigned long)pfn);
 }
 
 /**
@@ -686,13 +641,7 @@ static inline void hypervisor_ppn_add(PPN64 pfn)
  */
 static inline void hypervisor_ppn_remove(PPN64 pfn)
 {
-	unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
-	VMW_PORT(VMW_PORT_CMD_MKSGS_REMOVE_PPN,
-		(unsigned long)pfn, si, di,
-		0,
-		VMW_HYPERVISOR_MAGIC,
-		eax, ebx, ecx, edx, si, di);
+	vmware_hypercall1(VMW_PORT_CMD_MKSGS_REMOVE_PPN, (unsigned long)pfn);
 }
 
 #if IS_ENABLED(CONFIG_DRM_VMWGFX_MKSSTATS)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
index 4f40167ad61f..29bd0af83038 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
@@ -34,6 +34,8 @@
 #define VMWARE_HYPERVISOR_HB  BIT(0)
 #define VMWARE_HYPERVISOR_OUT BIT(1)
 
+#define VMWARE_HYPERVISOR_MAGIC	0x564D5868
+
 #define X86_IO_MAGIC 0x86
 
 #define X86_IO_W7_SIZE_SHIFT 0
@@ -45,86 +47,159 @@
 #define X86_IO_W7_IMM_SHIFT  5
 #define X86_IO_W7_IMM_MASK  (0xff << X86_IO_W7_IMM_SHIFT)
 
-static inline void vmw_port(unsigned long cmd, unsigned long in_ebx,
-			    unsigned long in_si, unsigned long in_di,
-			    unsigned long flags, unsigned long magic,
-			    unsigned long *eax, unsigned long *ebx,
-			    unsigned long *ecx, unsigned long *edx,
-			    unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
 {
-	register u64 x0 asm("x0") = magic;
-	register u64 x1 asm("x1") = in_ebx;
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
 	register u64 x2 asm("x2") = cmd;
-	register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT;
-	register u64 x4 asm("x4") = in_si;
-	register u64 x5 asm("x5") = in_di;
+	register u64 x3 asm("x3") = VMWARE_HYPERVISOR_PORT;
+	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+				    X86_IO_W7_WITH |
+				    X86_IO_W7_DIR |
+				    (2 << X86_IO_W7_SIZE_SHIFT);
 
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0)
+		: "r" (x1), "r" (x2), "r" (x3), "r" (x7)
+		: "memory");
+
+	return x0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out2)
+{
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
+	register u64 x2 asm("x2") = cmd;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+	register u64 x4 asm("x4") = in4;
+	register u64 x5 asm("x5") = in5;
 	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
 				    X86_IO_W7_WITH |
 				    X86_IO_W7_DIR |
 				    (2 << X86_IO_W7_SIZE_SHIFT);
 
-	asm volatile("mrs xzr, mdccsr_el0 \n\t"
-		     : "+r"(x0), "+r"(x1), "+r"(x2),
-		       "+r"(x3), "+r"(x4), "+r"(x5)
-		     : "r"(x7)
-		     :);
-	*eax = x0;
-	*ebx = x1;
-	*ecx = x2;
-	*edx = x3;
-	*si = x4;
-	*di = x5;
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x2)
+		: "r" (x1), "r" (x3), "r" (x4), "r" (x5), "r" (x7)
+		: "memory");
+
+	*out2 = x2;
+	return x0;
 }
 
-static inline void vmw_port_hb(unsigned long cmd, unsigned long in_ecx,
-			       unsigned long in_si, unsigned long in_di,
-			       unsigned long flags, unsigned long magic,
-			       unsigned long bp, u32 w7dir,
-			       unsigned long *eax, unsigned long *ebx,
-			       unsigned long *ecx, unsigned long *edx,
-			       unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+				unsigned long in3, uint32_t *out2,
+				uint32_t *out3, uint32_t *out4,
+				uint32_t *out5)
 {
-	register u64 x0 asm("x0") = magic;
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
+	register u64 x2 asm("x2") = cmd;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+	register u64 x4 asm("x4");
+	register u64 x5 asm("x5");
+	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+				    X86_IO_W7_WITH |
+				    X86_IO_W7_DIR |
+				    (2 << X86_IO_W7_SIZE_SHIFT);
+
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x2), "+r" (x3), "=r" (x4), "=r" (x5)
+		: "r" (x1), "r" (x7)
+		: "memory");
+
+	*out2 = x2;
+	*out3 = x3;
+	*out4 = x4;
+	*out5 = x5;
+	return x0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+				unsigned long in3, unsigned long in4,
+				unsigned long in5, uint32_t *out1,
+				uint32_t *out2, uint32_t *out3)
+{
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+	register u64 x1 asm("x1") = in1;
+	register u64 x2 asm("x2") = cmd;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+	register u64 x4 asm("x4") = in4;
+	register u64 x5 asm("x5") = in5;
+	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+				    X86_IO_W7_WITH |
+				    X86_IO_W7_DIR |
+				    (2 << X86_IO_W7_SIZE_SHIFT);
+
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x1), "+r" (x2), "+r" (x3)
+		: "r" (x4), "r" (x5), "r" (x7)
+		: "memory");
+
+	*out1 = x1;
+	*out2 = x2;
+	*out3 = x3;
+	return x0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb(unsigned long cmd, unsigned long in2,
+				  unsigned long in3, unsigned long in4,
+				  unsigned long in5, unsigned long in6,
+				  uint32_t *out1, int dir)
+{
+	register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
 	register u64 x1 asm("x1") = cmd;
-	register u64 x2 asm("x2") = in_ecx;
-	register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT_HB;
-	register u64 x4 asm("x4") = in_si;
-	register u64 x5 asm("x5") = in_di;
-	register u64 x6 asm("x6") = bp;
+	register u64 x2 asm("x2") = in2;
+	register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT_HB;
+	register u64 x4 asm("x4") = in4;
+	register u64 x5 asm("x5") = in5;
+	register u64 x6 asm("x6") = in6;
 	register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
 				    X86_IO_W7_STR |
 				    X86_IO_W7_WITH |
-				    w7dir;
-
-	asm volatile("mrs xzr, mdccsr_el0 \n\t"
-		     : "+r"(x0), "+r"(x1), "+r"(x2),
-		       "+r"(x3), "+r"(x4), "+r"(x5)
-		     : "r"(x6), "r"(x7)
-		     :);
-	*eax = x0;
-	*ebx = x1;
-	*ecx = x2;
-	*edx = x3;
-	*si  = x4;
-	*di  = x5;
-}
+				    dir;
 
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, flags, magic, eax, ebx, ecx, edx,  \
-		 si, di)                                                       \
-	vmw_port(cmd, in_ebx, in_si, in_di, flags, magic, &eax, &ebx, &ecx,    \
-		 &edx, &si, &di)
+	asm_inline volatile (
+		"mrs xzr, mdccsr_el0; "
+		: "+r" (x0), "+r" (x1)
+		: "r" (x2), "r" (x3), "r" (x4), "r" (x5),
+		  "r" (x6), "r" (x7)
+		: "memory");
 
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
-		        ecx, edx, si, di)                                      \
-	vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp,               \
-                    0, &eax, &ebx, &ecx, &edx, &si, &di)
+	*out1 = x1;
+	return x0;
+}
 
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx,  \
-		       ecx, edx, si, di)                                       \
-	vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp,               \
-		    X86_IO_W7_DIR, &eax, &ebx, &ecx, &edx, &si, &di)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+				      unsigned long in3, unsigned long in4,
+				      unsigned long in5, unsigned long in6,
+				      uint32_t *out1)
+{
+	return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1, 0);
+}
 
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+				     unsigned long in3, unsigned long in4,
+				     unsigned long in5, unsigned long in6,
+				     uint32_t *out1)
+{
+	return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6,  out1,
+				   X86_IO_W7_DIR);
+}
 #endif
 
 #endif /* _VMWGFX_MSG_ARM64_H */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index e040ee21ea1a..13304d34cc6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -37,193 +37,6 @@
 
 #include <asm/vmware.h>
 
-/**
- * Hypervisor-specific bi-directional communication channel.  Should never
- * execute on bare metal hardware.  The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last two parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ebx: [IN] Message Len, through EBX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set ot 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si:  [OUT]
- * @di:  [OUT]
- */
-#define VMW_PORT(cmd, in_ebx, in_si, in_di,	\
-                 flags, magic,		\
-                 eax, ebx, ecx, edx, si, di)	\
-({						\
-        asm volatile (VMWARE_HYPERCALL :	\
-                "=a"(eax),			\
-                "=b"(ebx),			\
-                "=c"(ecx),			\
-                "=d"(edx),			\
-                "=S"(si),			\
-                "=D"(di) :			\
-         [port] "i" (VMWARE_HYPERVISOR_PORT),	\
-         [mode] "m" (vmware_hypercall_mode),	\
-                "a"(magic),			\
-                "b"(in_ebx),			\
-                "c"(cmd),			\
-                "d"(flags),			\
-                "S"(in_si),			\
-                "D"(in_di) :			\
-                "memory");			\
-})
-
-
-/**
- * Hypervisor-specific bi-directional communication channel.  Should never
- * execute on bare metal hardware.  The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last 3 parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ecx: [IN] Message Len, through ECX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set to 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @bp:  [IN]
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si:  [OUT]
- * @di:  [OUT]
- */
-#ifdef __x86_64__
-
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di,	\
-                        flags, magic, bp,		\
-                        eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile (					\
-		UNWIND_HINT_SAVE			\
-		"push %%rbp;"				\
-		UNWIND_HINT_UNDEFINED			\
-                "mov %12, %%rbp;"			\
-                "rep outsb;"				\
-                "pop %%rbp;"				\
-		UNWIND_HINT_RESTORE :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "r"(bp) :				\
-                "memory", "cc");			\
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di,	\
-                       flags, magic, bp,		\
-                       eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile (					\
-		UNWIND_HINT_SAVE			\
-		"push %%rbp;"				\
-		UNWIND_HINT_UNDEFINED			\
-                "mov %12, %%rbp;"			\
-                "rep insb;"				\
-                "pop %%rbp;"				\
-		UNWIND_HINT_RESTORE :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "r"(bp) :				\
-                "memory", "cc");			\
-})
-
-#elif defined(__i386__)
-
-/*
- * In the 32-bit version of this macro, we store bp in a memory location
- * because we've ran out of registers.
- * Now we can't reference that memory location while we've modified
- * %esp or %ebp, so we first push it on the stack, just before we push
- * %ebp, and then when we need it we read it from the stack where we
- * just pushed it.
- */
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di,	\
-                        flags, magic, bp,		\
-                        eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile ("push %12;"			\
-                "push %%ebp;"				\
-                "mov 0x04(%%esp), %%ebp;"		\
-                VMWARE_HYPERCALL_HB_OUT			\
-                "pop %%ebp;"				\
-                "add $0x04, %%esp;" :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "m"(bp) :				\
-                "memory", "cc");			\
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di,	\
-                       flags, magic, bp,		\
-                       eax, ebx, ecx, edx, si, di)	\
-({							\
-        asm volatile ("push %12;"			\
-                "push %%ebp;"				\
-                "mov 0x04(%%esp), %%ebp;"		\
-                VMWARE_HYPERCALL_HB_IN			\
-                "pop %%ebp;"				\
-                "add $0x04, %%esp;" :			\
-                "=a"(eax),				\
-                "=b"(ebx),				\
-                "=c"(ecx),				\
-                "=d"(edx),				\
-                "=S"(si),				\
-                "=D"(di) :				\
-                "a"(magic),				\
-                "b"(cmd),				\
-                "c"(in_ecx),				\
-                "d"(flags),				\
-                "S"(in_si),				\
-                "D"(in_di),				\
-                "m"(bp) :				\
-                "memory", "cc");			\
-})
-#endif /* defined(__i386__) */
-
 #endif /* defined(__i386__) || defined(__x86_64__) */
 
 #endif /* _VMWGFX_MSG_X86_H */
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 6/7] x86/vmware: Undefine VMWARE_HYPERCALL
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09  8:40   ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

No more direct use of VMWARE_HYPERCALL macro should be allowed.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
---
 arch/x86/include/asm/vmware.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 2ac87068184a..84a31f579a30 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -273,5 +273,6 @@ unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
 }
 #undef VMW_BP_REG
 #undef VMW_BP_CONSTRAINT
+#undef VMWARE_HYPERCALL
 
 #endif
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 6/7] x86/vmware: Undefine VMWARE_HYPERCALL
@ 2024-01-09  8:40   ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

No more direct use of VMWARE_HYPERCALL macro should be allowed.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
---
 arch/x86/include/asm/vmware.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 2ac87068184a..84a31f579a30 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -273,5 +273,6 @@ unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
 }
 #undef VMW_BP_REG
 #undef VMW_BP_CONSTRAINT
+#undef VMWARE_HYPERCALL
 
 #endif
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09  8:40   ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.

No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.

Co-developed-by: Tim Merrifield <timothym@vmware.com>
Signed-off-by: Tim Merrifield <timothym@vmware.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
 arch/x86/include/asm/vmware.h | 79 +++++++++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/vmware.c  | 25 +++++++++++
 2 files changed, 104 insertions(+)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 84a31f579a30..3bd593c6591d 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -18,6 +18,12 @@
  * arg2 - Hypercall command
  * arg3 bits [15:0] - Port number, LB and direction flags
  *
+ * - Low bandwidth TDX hypercalls (x86_64 only) are similar to LB
+ * hypercalls. They also have up to 6 input and 6 output on registers
+ * arguments, with different argument to register mapping:
+ * %r12 (arg0), %rbx (arg1), %r13 (arg2), %rdx (arg3),
+ * %rsi (arg4), %rdi (arg5).
+ *
  * - High bandwidth (HB) hypercalls are I/O port based only. They have
  * up to 7 input and 7 output arguments passed and returned using
  * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
@@ -54,12 +60,61 @@
 #define VMWARE_CMD_GETHZ		45
 #define VMWARE_CMD_GETVCPU_INFO		68
 #define VMWARE_CMD_STEALCLOCK		91
+/*
+ * Hypercall command mask:
+ *   bits [6:0] command, range [0, 127]
+ *   bits [19:16] sub-command, range [0, 15]
+ */
+#define VMWARE_CMD_MASK			0xf007fU
 
 #define CPUID_VMWARE_FEATURES_ECX_VMMCALL	BIT(0)
 #define CPUID_VMWARE_FEATURES_ECX_VMCALL	BIT(1)
 
 extern u8 vmware_hypercall_mode;
 
+#define VMWARE_TDX_VENDOR_LEAF 0x1af7e4909ULL
+#define VMWARE_TDX_HCALL_FUNC  1
+
+extern unsigned long vmware_tdx_hypercall(unsigned long cmd,
+					  struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses %rax (arg0) and %rcx (arg2). Therefore,
+ * we remap those registers to %r12 and %r13, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall_args(unsigned long cmd, unsigned long in1,
+					unsigned long in3, unsigned long in4,
+					unsigned long in5,
+					uint32_t *out1, uint32_t *out2,
+					uint32_t *out3, uint32_t *out4,
+					uint32_t *out5)
+{
+	unsigned long ret;
+
+	struct tdx_module_args args = {
+		.rbx = in1,
+		.rdx = in3,
+		.rsi = in4,
+		.rdi = in5,
+	};
+
+	ret = vmware_tdx_hypercall(cmd, &args);
+
+	if (out1)
+		*out1 = args.rbx;
+	if (out2)
+		*out2 = args.r13;
+	if (out3)
+		*out3 = args.rdx;
+	if (out4)
+		*out4 = args.rsi;
+	if (out5)
+		*out5 = args.rdi;
+
+	return ret;
+}
+
 /*
  * The low bandwidth call. The low word of %edx is presumed to have OUT bit
  * set. The high word of %edx may contain input data from the caller.
@@ -87,6 +142,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0,
+						 NULL, NULL, NULL, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -105,6 +164,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0,
+						 out1, out2, NULL, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=b" (*out1), "=c" (*out2)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -124,6 +187,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0,
+						 out1, out2, out3, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -143,6 +210,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, in3, in4, in5,
+						 NULL, out2, NULL, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=c" (*out2)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -165,6 +236,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, in3, 0, 0,
+						 NULL, out2, out3, out4, out5);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
 		  "=D" (*out5)
@@ -186,6 +261,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, in3, in4, in5,
+						 out1, out2, out3, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..84caa67d4820 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,31 @@ static bool __init vmware_legacy_x2apic_available(void)
 		(eax & BIT(VCPU_LEGACY_X2APIC));
 }
 
+#ifdef CONFIG_INTEL_TDX_GUEST
+unsigned long vmware_tdx_hypercall(unsigned long cmd,
+				   struct tdx_module_args *args)
+{
+	if (!hypervisor_is_type(X86_HYPER_VMWARE))
+		return ULONG_MAX;
+
+	if (cmd & ~VMWARE_CMD_MASK) {
+		pr_warn_once("Out of range command %lx\n", cmd);
+		return ULONG_MAX;
+	}
+
+	args->r10 = VMWARE_TDX_VENDOR_LEAF;
+	args->r11 = VMWARE_TDX_HCALL_FUNC;
+	args->r12 = VMWARE_HYPERVISOR_MAGIC;
+	args->r13 = cmd;
+	args->r15 = 0; /* CPL */
+
+	__tdx_hypercall(args);
+
+	return args->r12;
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
+#endif
+
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
 					struct pt_regs *regs)
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
@ 2024-01-09  8:40   ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-09  8:40 UTC (permalink / raw)
  To: linux-kernel, virtualization, bp, hpa, dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, tzimmermann, pv-drivers, netdev, richardcochran,
	x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, zackr

VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.

No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.

Co-developed-by: Tim Merrifield <timothym@vmware.com>
Signed-off-by: Tim Merrifield <timothym@vmware.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
 arch/x86/include/asm/vmware.h | 79 +++++++++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/vmware.c  | 25 +++++++++++
 2 files changed, 104 insertions(+)

diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 84a31f579a30..3bd593c6591d 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -18,6 +18,12 @@
  * arg2 - Hypercall command
  * arg3 bits [15:0] - Port number, LB and direction flags
  *
+ * - Low bandwidth TDX hypercalls (x86_64 only) are similar to LB
+ * hypercalls. They also have up to 6 input and 6 output on registers
+ * arguments, with different argument to register mapping:
+ * %r12 (arg0), %rbx (arg1), %r13 (arg2), %rdx (arg3),
+ * %rsi (arg4), %rdi (arg5).
+ *
  * - High bandwidth (HB) hypercalls are I/O port based only. They have
  * up to 7 input and 7 output arguments passed and returned using
  * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
@@ -54,12 +60,61 @@
 #define VMWARE_CMD_GETHZ		45
 #define VMWARE_CMD_GETVCPU_INFO		68
 #define VMWARE_CMD_STEALCLOCK		91
+/*
+ * Hypercall command mask:
+ *   bits [6:0] command, range [0, 127]
+ *   bits [19:16] sub-command, range [0, 15]
+ */
+#define VMWARE_CMD_MASK			0xf007fU
 
 #define CPUID_VMWARE_FEATURES_ECX_VMMCALL	BIT(0)
 #define CPUID_VMWARE_FEATURES_ECX_VMCALL	BIT(1)
 
 extern u8 vmware_hypercall_mode;
 
+#define VMWARE_TDX_VENDOR_LEAF 0x1af7e4909ULL
+#define VMWARE_TDX_HCALL_FUNC  1
+
+extern unsigned long vmware_tdx_hypercall(unsigned long cmd,
+					  struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses %rax (arg0) and %rcx (arg2). Therefore,
+ * we remap those registers to %r12 and %r13, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall_args(unsigned long cmd, unsigned long in1,
+					unsigned long in3, unsigned long in4,
+					unsigned long in5,
+					uint32_t *out1, uint32_t *out2,
+					uint32_t *out3, uint32_t *out4,
+					uint32_t *out5)
+{
+	unsigned long ret;
+
+	struct tdx_module_args args = {
+		.rbx = in1,
+		.rdx = in3,
+		.rsi = in4,
+		.rdi = in5,
+	};
+
+	ret = vmware_tdx_hypercall(cmd, &args);
+
+	if (out1)
+		*out1 = args.rbx;
+	if (out2)
+		*out2 = args.r13;
+	if (out3)
+		*out3 = args.rdx;
+	if (out4)
+		*out4 = args.rsi;
+	if (out5)
+		*out5 = args.rdi;
+
+	return ret;
+}
+
 /*
  * The low bandwidth call. The low word of %edx is presumed to have OUT bit
  * set. The high word of %edx may contain input data from the caller.
@@ -87,6 +142,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0,
+						 NULL, NULL, NULL, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -105,6 +164,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0,
+						 out1, out2, NULL, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=b" (*out1), "=c" (*out2)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -124,6 +187,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0,
+						 out1, out2, out3, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -143,6 +210,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, in3, in4, in5,
+						 NULL, out2, NULL, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=c" (*out2)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -165,6 +236,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, in3, 0, 0,
+						 NULL, out2, out3, out4, out5);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
 		  "=D" (*out5)
@@ -186,6 +261,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
 {
 	unsigned long out0;
 
+	if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return vmware_tdx_hypercall_args(cmd, in1, in3, in4, in5,
+						 out1, out2, out3, NULL, NULL);
+
 	asm_inline volatile (VMWARE_HYPERCALL
 		: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
 		: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..84caa67d4820 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,31 @@ static bool __init vmware_legacy_x2apic_available(void)
 		(eax & BIT(VCPU_LEGACY_X2APIC));
 }
 
+#ifdef CONFIG_INTEL_TDX_GUEST
+unsigned long vmware_tdx_hypercall(unsigned long cmd,
+				   struct tdx_module_args *args)
+{
+	if (!hypervisor_is_type(X86_HYPER_VMWARE))
+		return ULONG_MAX;
+
+	if (cmd & ~VMWARE_CMD_MASK) {
+		pr_warn_once("Out of range command %lx\n", cmd);
+		return ULONG_MAX;
+	}
+
+	args->r10 = VMWARE_TDX_VENDOR_LEAF;
+	args->r11 = VMWARE_TDX_HCALL_FUNC;
+	args->r12 = VMWARE_HYPERVISOR_MAGIC;
+	args->r13 = cmd;
+	args->r15 = 0; /* CPL */
+
+	__tdx_hypercall(args);
+
+	return args->r12;
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
+#endif
+
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
 					struct pt_regs *regs)
-- 
2.39.0


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 0/7] VMware hypercalls enhancements
  2024-01-09  8:40 ` Alexey Makhalov
@ 2024-01-09 10:21   ` Borislav Petkov
  -1 siblings, 0 replies; 28+ messages in thread
From: Borislav Petkov @ 2024-01-09 10:21 UTC (permalink / raw)
  To: Alexey Makhalov
  Cc: pv-drivers, dave.hansen, dri-devel, namit, hpa, timothym, x86,
	mingo, linux-graphics-maintainer, linux-input, tzimmermann,
	richardcochran, virtualization, mripard, akaher, jsipek, tglx,
	netdev, dmitry.torokhov, linux-kernel, horms, kirill.shutemov,
	zackr

On Tue, Jan 09, 2024 at 12:40:45AM -0800, Alexey Makhalov wrote:
> v5->v6 change:
> - Added ack by Kirill A. Shutemov in patch 7.

Please do not spam. Adding someone's Ack does not mean you have to
resend the whole thing immediately again.

While waiting, please read Documentation/process/submitting-patches.rst

and especially:

"Don't get discouraged - or impatient
------------------------------------

After you have submitted your change, be patient and wait.  Reviewers are
busy people and may not get to your patch right away.

Once upon a time, patches used to disappear into the void without comment,
but the development process works more smoothly than that now.  You should
receive comments within a few weeks (typically 2-3); if that does not
happen, make sure that you have sent your patches to the right place.
Wait for a minimum of one week before resubmitting or pinging reviewers
- possibly longer during busy times like merge windows."

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 0/7] VMware hypercalls enhancements
@ 2024-01-09 10:21   ` Borislav Petkov
  0 siblings, 0 replies; 28+ messages in thread
From: Borislav Petkov @ 2024-01-09 10:21 UTC (permalink / raw)
  To: Alexey Makhalov
  Cc: linux-kernel, virtualization, hpa, dave.hansen, mingo, tglx, x86,
	netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

On Tue, Jan 09, 2024 at 12:40:45AM -0800, Alexey Makhalov wrote:
> v5->v6 change:
> - Added ack by Kirill A. Shutemov in patch 7.

Please do not spam. Adding someone's Ack does not mean you have to
resend the whole thing immediately again.

While waiting, please read Documentation/process/submitting-patches.rst

and especially:

"Don't get discouraged - or impatient
------------------------------------

After you have submitted your change, be patient and wait.  Reviewers are
busy people and may not get to your patch right away.

Once upon a time, patches used to disappear into the void without comment,
but the development process works more smoothly than that now.  You should
receive comments within a few weeks (typically 2-3); if that does not
happen, make sure that you have sent your patches to the right place.
Wait for a minimum of one week before resubmitting or pinging reviewers
- possibly longer during busy times like merge windows."

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
  2024-01-09  8:40   ` Alexey Makhalov
@ 2024-01-22 16:32     ` Dave Hansen
  -1 siblings, 0 replies; 28+ messages in thread
From: Dave Hansen @ 2024-01-22 16:32 UTC (permalink / raw)
  To: Alexey Makhalov, linux-kernel, virtualization, bp, hpa,
	dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, daniel, tzimmermann, pv-drivers, netdev,
	richardcochran, x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, airlied, zackr

On 1/9/24 00:40, Alexey Makhalov wrote:
> +#ifdef CONFIG_INTEL_TDX_GUEST
> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
> +				   struct tdx_module_args *args)
> +{
> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
> +		return ULONG_MAX;
> +
> +	if (cmd & ~VMWARE_CMD_MASK) {
> +		pr_warn_once("Out of range command %lx\n", cmd);
> +		return ULONG_MAX;
> +	}
> +
> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
> +	args->r13 = cmd;
> +	args->r15 = 0; /* CPL */
> +
> +	__tdx_hypercall(args);
> +
> +	return args->r12;
> +}
> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
> +#endif

This is the kind of wrapper that I was hoping for.  Thanks.

Acked-by: Dave Hansen <dave.hansen@linux.intel.com>


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
@ 2024-01-22 16:32     ` Dave Hansen
  0 siblings, 0 replies; 28+ messages in thread
From: Dave Hansen @ 2024-01-22 16:32 UTC (permalink / raw)
  To: Alexey Makhalov, linux-kernel, virtualization, bp, hpa,
	dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

On 1/9/24 00:40, Alexey Makhalov wrote:
> +#ifdef CONFIG_INTEL_TDX_GUEST
> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
> +				   struct tdx_module_args *args)
> +{
> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
> +		return ULONG_MAX;
> +
> +	if (cmd & ~VMWARE_CMD_MASK) {
> +		pr_warn_once("Out of range command %lx\n", cmd);
> +		return ULONG_MAX;
> +	}
> +
> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
> +	args->r13 = cmd;
> +	args->r15 = 0; /* CPL */
> +
> +	__tdx_hypercall(args);
> +
> +	return args->r12;
> +}
> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
> +#endif

This is the kind of wrapper that I was hoping for.  Thanks.

Acked-by: Dave Hansen <dave.hansen@linux.intel.com>


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
  2024-01-22 16:32     ` Dave Hansen
@ 2024-01-22 18:28       ` H. Peter Anvin
  -1 siblings, 0 replies; 28+ messages in thread
From: H. Peter Anvin @ 2024-01-22 18:28 UTC (permalink / raw)
  To: Dave Hansen, Alexey Makhalov, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>On 1/9/24 00:40, Alexey Makhalov wrote:
>> +#ifdef CONFIG_INTEL_TDX_GUEST
>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>> +				   struct tdx_module_args *args)
>> +{
>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>> +		return ULONG_MAX;
>> +
>> +	if (cmd & ~VMWARE_CMD_MASK) {
>> +		pr_warn_once("Out of range command %lx\n", cmd);
>> +		return ULONG_MAX;
>> +	}
>> +
>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>> +	args->r13 = cmd;
>> +	args->r15 = 0; /* CPL */
>> +
>> +	__tdx_hypercall(args);
>> +
>> +	return args->r12;
>> +}
>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>> +#endif
>
>This is the kind of wrapper that I was hoping for.  Thanks.
>
>Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>

I'm slightly confused by this TBH.

Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.

Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.




^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
@ 2024-01-22 18:28       ` H. Peter Anvin
  0 siblings, 0 replies; 28+ messages in thread
From: H. Peter Anvin @ 2024-01-22 18:28 UTC (permalink / raw)
  To: Dave Hansen, Alexey Makhalov, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, daniel, tzimmermann, pv-drivers, netdev,
	richardcochran, x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, airlied, zackr

On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>On 1/9/24 00:40, Alexey Makhalov wrote:
>> +#ifdef CONFIG_INTEL_TDX_GUEST
>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>> +				   struct tdx_module_args *args)
>> +{
>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>> +		return ULONG_MAX;
>> +
>> +	if (cmd & ~VMWARE_CMD_MASK) {
>> +		pr_warn_once("Out of range command %lx\n", cmd);
>> +		return ULONG_MAX;
>> +	}
>> +
>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>> +	args->r13 = cmd;
>> +	args->r15 = 0; /* CPL */
>> +
>> +	__tdx_hypercall(args);
>> +
>> +	return args->r12;
>> +}
>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>> +#endif
>
>This is the kind of wrapper that I was hoping for.  Thanks.
>
>Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>

I'm slightly confused by this TBH.

Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.

Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.




^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
  2024-01-22 18:28       ` H. Peter Anvin
@ 2024-01-23  0:04         ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-23  0:04 UTC (permalink / raw)
  To: H. Peter Anvin, Dave Hansen, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov



On 1/22/24 10:28 AM, H. Peter Anvin wrote:
> On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>> On 1/9/24 00:40, Alexey Makhalov wrote:
>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>>> +				   struct tdx_module_args *args)
>>> +{
>>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>>> +		return ULONG_MAX;
>>> +
>>> +	if (cmd & ~VMWARE_CMD_MASK) {
>>> +		pr_warn_once("Out of range command %lx\n", cmd);
>>> +		return ULONG_MAX;
>>> +	}
>>> +
>>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>>> +	args->r13 = cmd;
>>> +	args->r15 = 0; /* CPL */
>>> +
>>> +	__tdx_hypercall(args);
>>> +
>>> +	return args->r12;
>>> +}
>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>>> +#endif
>>
>> This is the kind of wrapper that I was hoping for.  Thanks.
>>
>> Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>>
> 
> I'm slightly confused by this TBH.
> 
> Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.
> 
> Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.
> 

This patch series introduces vmware_hypercall family of functions 
similar to kvm_hypercall. Similarity: both vmware and kvm 
implementations are static inline functions and both of them use 
__tdx_hypercall (global not exported symbol). Difference: kvm_hypercall 
functions are used _only_ within the kernel, but vmware_hypercall are 
also used by modules.
Exporting __tdx_hypercall function is an original Dave's concern.
So we ended up with exporting wrapper, not generic, but VMware specific 
with added checks against arbitrary use.
vmware_tdx_hypercall is not designed for !X86_HYPER_VMWARE callers. But 
such a calls are not forbidden.
Arguments in a structure is an API for __tdx_hypercall(). Input and 
output argument handling are done by vmware_hypercall callers, while 
VMware specific dress up is inside the wrapper.

Peter, do you think code comments are required to make it clear for the 
reader?



^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
@ 2024-01-23  0:04         ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-23  0:04 UTC (permalink / raw)
  To: H. Peter Anvin, Dave Hansen, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, daniel, tzimmermann, pv-drivers, netdev,
	richardcochran, x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, airlied, zackr



On 1/22/24 10:28 AM, H. Peter Anvin wrote:
> On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>> On 1/9/24 00:40, Alexey Makhalov wrote:
>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>>> +				   struct tdx_module_args *args)
>>> +{
>>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>>> +		return ULONG_MAX;
>>> +
>>> +	if (cmd & ~VMWARE_CMD_MASK) {
>>> +		pr_warn_once("Out of range command %lx\n", cmd);
>>> +		return ULONG_MAX;
>>> +	}
>>> +
>>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>>> +	args->r13 = cmd;
>>> +	args->r15 = 0; /* CPL */
>>> +
>>> +	__tdx_hypercall(args);
>>> +
>>> +	return args->r12;
>>> +}
>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>>> +#endif
>>
>> This is the kind of wrapper that I was hoping for.  Thanks.
>>
>> Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>>
> 
> I'm slightly confused by this TBH.
> 
> Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.
> 
> Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.
> 

This patch series introduces vmware_hypercall family of functions 
similar to kvm_hypercall. Similarity: both vmware and kvm 
implementations are static inline functions and both of them use 
__tdx_hypercall (global not exported symbol). Difference: kvm_hypercall 
functions are used _only_ within the kernel, but vmware_hypercall are 
also used by modules.
Exporting __tdx_hypercall function is an original Dave's concern.
So we ended up with exporting wrapper, not generic, but VMware specific 
with added checks against arbitrary use.
vmware_tdx_hypercall is not designed for !X86_HYPER_VMWARE callers. But 
such a calls are not forbidden.
Arguments in a structure is an API for __tdx_hypercall(). Input and 
output argument handling are done by vmware_hypercall callers, while 
VMware specific dress up is inside the wrapper.

Peter, do you think code comments are required to make it clear for the 
reader?



^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
  2024-01-23  0:04         ` Alexey Makhalov
@ 2024-01-23  0:17           ` H. Peter Anvin
  -1 siblings, 0 replies; 28+ messages in thread
From: H. Peter Anvin @ 2024-01-23  0:17 UTC (permalink / raw)
  To: Alexey Makhalov, Dave Hansen, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov

On January 22, 2024 4:04:33 PM PST, Alexey Makhalov <alexey.makhalov@broadcom.com> wrote:
>
>
>On 1/22/24 10:28 AM, H. Peter Anvin wrote:
>> On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>>> On 1/9/24 00:40, Alexey Makhalov wrote:
>>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>>>> +				   struct tdx_module_args *args)
>>>> +{
>>>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>>>> +		return ULONG_MAX;
>>>> +
>>>> +	if (cmd & ~VMWARE_CMD_MASK) {
>>>> +		pr_warn_once("Out of range command %lx\n", cmd);
>>>> +		return ULONG_MAX;
>>>> +	}
>>>> +
>>>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>>>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>>>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>>>> +	args->r13 = cmd;
>>>> +	args->r15 = 0; /* CPL */
>>>> +
>>>> +	__tdx_hypercall(args);
>>>> +
>>>> +	return args->r12;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>>>> +#endif
>>> 
>>> This is the kind of wrapper that I was hoping for.  Thanks.
>>> 
>>> Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>>> 
>> 
>> I'm slightly confused by this TBH.
>> 
>> Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.
>> 
>> Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.
>> 
>
>This patch series introduces vmware_hypercall family of functions similar to kvm_hypercall. Similarity: both vmware and kvm implementations are static inline functions and both of them use __tdx_hypercall (global not exported symbol). Difference: kvm_hypercall functions are used _only_ within the kernel, but vmware_hypercall are also used by modules.
>Exporting __tdx_hypercall function is an original Dave's concern.
>So we ended up with exporting wrapper, not generic, but VMware specific with added checks against arbitrary use.
>vmware_tdx_hypercall is not designed for !X86_HYPER_VMWARE callers. But such a calls are not forbidden.
>Arguments in a structure is an API for __tdx_hypercall(). Input and output argument handling are done by vmware_hypercall callers, while VMware specific dress up is inside the wrapper.
>
>Peter, do you think code comments are required to make it clear for the reader?
>
>

TBH that explanation didn't make much sense to me...

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
@ 2024-01-23  0:17           ` H. Peter Anvin
  0 siblings, 0 replies; 28+ messages in thread
From: H. Peter Anvin @ 2024-01-23  0:17 UTC (permalink / raw)
  To: Alexey Makhalov, Dave Hansen, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, daniel, tzimmermann, pv-drivers, netdev,
	richardcochran, x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, airlied, zackr

On January 22, 2024 4:04:33 PM PST, Alexey Makhalov <alexey.makhalov@broadcom.com> wrote:
>
>
>On 1/22/24 10:28 AM, H. Peter Anvin wrote:
>> On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>>> On 1/9/24 00:40, Alexey Makhalov wrote:
>>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>>>> +				   struct tdx_module_args *args)
>>>> +{
>>>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>>>> +		return ULONG_MAX;
>>>> +
>>>> +	if (cmd & ~VMWARE_CMD_MASK) {
>>>> +		pr_warn_once("Out of range command %lx\n", cmd);
>>>> +		return ULONG_MAX;
>>>> +	}
>>>> +
>>>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>>>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>>>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>>>> +	args->r13 = cmd;
>>>> +	args->r15 = 0; /* CPL */
>>>> +
>>>> +	__tdx_hypercall(args);
>>>> +
>>>> +	return args->r12;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>>>> +#endif
>>> 
>>> This is the kind of wrapper that I was hoping for.  Thanks.
>>> 
>>> Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>>> 
>> 
>> I'm slightly confused by this TBH.
>> 
>> Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.
>> 
>> Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.
>> 
>
>This patch series introduces vmware_hypercall family of functions similar to kvm_hypercall. Similarity: both vmware and kvm implementations are static inline functions and both of them use __tdx_hypercall (global not exported symbol). Difference: kvm_hypercall functions are used _only_ within the kernel, but vmware_hypercall are also used by modules.
>Exporting __tdx_hypercall function is an original Dave's concern.
>So we ended up with exporting wrapper, not generic, but VMware specific with added checks against arbitrary use.
>vmware_tdx_hypercall is not designed for !X86_HYPER_VMWARE callers. But such a calls are not forbidden.
>Arguments in a structure is an API for __tdx_hypercall(). Input and output argument handling are done by vmware_hypercall callers, while VMware specific dress up is inside the wrapper.
>
>Peter, do you think code comments are required to make it clear for the reader?
>
>

TBH that explanation didn't make much sense to me...

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
  2024-01-23  0:17           ` H. Peter Anvin
@ 2024-01-26  0:55             ` Alexey Makhalov
  -1 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-26  0:55 UTC (permalink / raw)
  To: H. Peter Anvin, Dave Hansen, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
	linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
	jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
	maarten.lankhorst, horms, kirill.shutemov



On 1/22/24 4:17 PM, H. Peter Anvin wrote:
> On January 22, 2024 4:04:33 PM PST, Alexey Makhalov <alexey.makhalov@broadcom.com> wrote:
>>
>>
>> On 1/22/24 10:28 AM, H. Peter Anvin wrote:
>>> On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>>>> On 1/9/24 00:40, Alexey Makhalov wrote:
>>>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>>>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>>>>> +				   struct tdx_module_args *args)
>>>>> +{
>>>>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>>>>> +		return ULONG_MAX;
>>>>> +
>>>>> +	if (cmd & ~VMWARE_CMD_MASK) {
>>>>> +		pr_warn_once("Out of range command %lx\n", cmd);
>>>>> +		return ULONG_MAX;
>>>>> +	}
>>>>> +
>>>>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>>>>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>>>>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>>>>> +	args->r13 = cmd;
>>>>> +	args->r15 = 0; /* CPL */
>>>>> +
>>>>> +	__tdx_hypercall(args);
>>>>> +
>>>>> +	return args->r12;
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>>>>> +#endif
>>>>
>>>> This is the kind of wrapper that I was hoping for.  Thanks.
>>>>
>>>> Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>>>>
>>>
>>> I'm slightly confused by this TBH.
>>>
>>> Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.
>>>
>>> Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.
>>>
>>
>> This patch series introduces vmware_hypercall family of functions similar to kvm_hypercall. Similarity: both vmware and kvm implementations are static inline functions and both of them use __tdx_hypercall (global not exported symbol). Difference: kvm_hypercall functions are used _only_ within the kernel, but vmware_hypercall are also used by modules.
>> Exporting __tdx_hypercall function is an original Dave's concern.
>> So we ended up with exporting wrapper, not generic, but VMware specific with added checks against arbitrary use.
>> vmware_tdx_hypercall is not designed for !X86_HYPER_VMWARE callers. But such a calls are not forbidden.
>> Arguments in a structure is an API for __tdx_hypercall(). Input and output argument handling are done by vmware_hypercall callers, while VMware specific dress up is inside the wrapper.
>>
>> Peter, do you think code comments are required to make it clear for the reader?
>>
>>
> 
> TBH that explanation didn't make much sense to me...

Peter,

I would like to understand your concerns.

1. Are you suggesting to move structure (tdx parameters) initialization 
in one please, instead of one part there another part here? Do you 
prefer to pass all arguments as is to vmware_tdx_hypercall() and only 
define tdx_module_args there?

2. And second suggestion is to add pr_warn_once under "if 
(!hypervisor_is_type(X86_HYPER_VMWARE))" ?

--Alexey

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 7/7] x86/vmware: Add TDX hypercall support
@ 2024-01-26  0:55             ` Alexey Makhalov
  0 siblings, 0 replies; 28+ messages in thread
From: Alexey Makhalov @ 2024-01-26  0:55 UTC (permalink / raw)
  To: H. Peter Anvin, Dave Hansen, linux-kernel, virtualization, bp,
	dave.hansen, mingo, tglx
  Cc: dmitry.torokhov, daniel, tzimmermann, pv-drivers, netdev,
	richardcochran, x86, dri-devel, horms, akaher, timothym,
	linux-graphics-maintainer, mripard, jsipek, linux-input, namit,
	kirill.shutemov, airlied, zackr



On 1/22/24 4:17 PM, H. Peter Anvin wrote:
> On January 22, 2024 4:04:33 PM PST, Alexey Makhalov <alexey.makhalov@broadcom.com> wrote:
>>
>>
>> On 1/22/24 10:28 AM, H. Peter Anvin wrote:
>>> On January 22, 2024 8:32:22 AM PST, Dave Hansen <dave.hansen@intel.com> wrote:
>>>> On 1/9/24 00:40, Alexey Makhalov wrote:
>>>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>>>> +unsigned long vmware_tdx_hypercall(unsigned long cmd,
>>>>> +				   struct tdx_module_args *args)
>>>>> +{
>>>>> +	if (!hypervisor_is_type(X86_HYPER_VMWARE))
>>>>> +		return ULONG_MAX;
>>>>> +
>>>>> +	if (cmd & ~VMWARE_CMD_MASK) {
>>>>> +		pr_warn_once("Out of range command %lx\n", cmd);
>>>>> +		return ULONG_MAX;
>>>>> +	}
>>>>> +
>>>>> +	args->r10 = VMWARE_TDX_VENDOR_LEAF;
>>>>> +	args->r11 = VMWARE_TDX_HCALL_FUNC;
>>>>> +	args->r12 = VMWARE_HYPERVISOR_MAGIC;
>>>>> +	args->r13 = cmd;
>>>>> +	args->r15 = 0; /* CPL */
>>>>> +
>>>>> +	__tdx_hypercall(args);
>>>>> +
>>>>> +	return args->r12;
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
>>>>> +#endif
>>>>
>>>> This is the kind of wrapper that I was hoping for.  Thanks.
>>>>
>>>> Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
>>>>
>>>
>>> I'm slightly confused by this TBH.
>>>
>>> Why are the arguments passed in as a structure, which is modified by the wrapper to boot? This is analogous to a system call interface.
>>>
>>> Furthermore, this is an out-of-line function; it should never be called with !X86_HYPER_VMWARE or you are introducing overhead for other hypervisors; I believe a pr_warn_once() is in order at least, just as you have for the out-of-range test.
>>>
>>
>> This patch series introduces vmware_hypercall family of functions similar to kvm_hypercall. Similarity: both vmware and kvm implementations are static inline functions and both of them use __tdx_hypercall (global not exported symbol). Difference: kvm_hypercall functions are used _only_ within the kernel, but vmware_hypercall are also used by modules.
>> Exporting __tdx_hypercall function is an original Dave's concern.
>> So we ended up with exporting wrapper, not generic, but VMware specific with added checks against arbitrary use.
>> vmware_tdx_hypercall is not designed for !X86_HYPER_VMWARE callers. But such a calls are not forbidden.
>> Arguments in a structure is an API for __tdx_hypercall(). Input and output argument handling are done by vmware_hypercall callers, while VMware specific dress up is inside the wrapper.
>>
>> Peter, do you think code comments are required to make it clear for the reader?
>>
>>
> 
> TBH that explanation didn't make much sense to me...

Peter,

I would like to understand your concerns.

1. Are you suggesting to move structure (tdx parameters) initialization 
in one please, instead of one part there another part here? Do you 
prefer to pass all arguments as is to vmware_tdx_hypercall() and only 
define tdx_module_args there?

2. And second suggestion is to add pr_warn_once under "if 
(!hypervisor_is_type(X86_HYPER_VMWARE))" ?

--Alexey

^ permalink raw reply	[flat|nested] 28+ messages in thread

end of thread, other threads:[~2024-01-26  0:56 UTC | newest]

Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-01-09  8:40 [PATCH v6 0/7] VMware hypercalls enhancements Alexey Makhalov
2024-01-09  8:40 ` Alexey Makhalov
2024-01-09  8:40 ` [PATCH v6 1/7] x86/vmware: Move common macros to vmware.h Alexey Makhalov
2024-01-09  8:40   ` Alexey Makhalov
2024-01-09  8:40 ` [PATCH v6 2/7] x86/vmware: Introduce VMware hypercall API Alexey Makhalov
2024-01-09  8:40   ` Alexey Makhalov
2024-01-09  8:40 ` [PATCH v6 3/7] ptp/vmware: Use " Alexey Makhalov
2024-01-09  8:40   ` Alexey Makhalov
2024-01-09  8:40 ` [PATCH v6 4/7] input/vmmouse: " Alexey Makhalov
2024-01-09  8:40   ` Alexey Makhalov
2024-01-09  8:40 ` [PATCH v6 5/7] drm/vmwgfx: " Alexey Makhalov
2024-01-09  8:40   ` Alexey Makhalov
2024-01-09  8:40 ` [PATCH v6 6/7] x86/vmware: Undefine VMWARE_HYPERCALL Alexey Makhalov
2024-01-09  8:40   ` Alexey Makhalov
2024-01-09  8:40 ` [PATCH v6 7/7] x86/vmware: Add TDX hypercall support Alexey Makhalov
2024-01-09  8:40   ` Alexey Makhalov
2024-01-22 16:32   ` Dave Hansen
2024-01-22 16:32     ` Dave Hansen
2024-01-22 18:28     ` H. Peter Anvin
2024-01-22 18:28       ` H. Peter Anvin
2024-01-23  0:04       ` Alexey Makhalov
2024-01-23  0:04         ` Alexey Makhalov
2024-01-23  0:17         ` H. Peter Anvin
2024-01-23  0:17           ` H. Peter Anvin
2024-01-26  0:55           ` Alexey Makhalov
2024-01-26  0:55             ` Alexey Makhalov
2024-01-09 10:21 ` [PATCH v6 0/7] VMware hypercalls enhancements Borislav Petkov
2024-01-09 10:21   ` Borislav Petkov

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.