From: Karel Balej <karelb@gimli.ms.mff.cuni.cz>
To: Karel Balej <balejk@matfyz.cz>, Lee Jones <lee@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org
Cc: "Duje Mihanović" <duje.mihanovic@skole.hr>,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org
Subject: [RFC PATCH v3 0/5] initial support for Marvell 88PM886 PMIC
Date: Sun, 3 Mar 2024 11:04:21 +0100 [thread overview]
Message-ID: <20240303101506.4187-1-karelb@gimli.ms.mff.cuni.cz> (raw)
From: Karel Balej <balejk@matfyz.cz>
Hello,
the following implements basic support for Marvell's 88PM886 PMIC which
is found for instance as a component of the samsung,coreprimevelte
smartphone which inspired this and also serves as a testing platform.
The code for the MFD is based primarily on this old series [1] with the
addition of poweroff based on the smartphone's downstream kernel tree
[2]. The onkey and regulators drivers are based on the latter. I am not
in possesion of the datasheet.
[1] https://lore.kernel.org/all/1434098601-3498-1-git-send-email-yizhang@marvell.com/
[2] https://github.com/CoderCharmander/g361f-kernel
Thank you and kind regards,
K. B.
---
RFC v3:
- Address Rob's feedback:
- Drop onkey bindings patch.
- Rename PM88X -> PM886 everywhere.
- RFC v2: https://lore.kernel.org/all/20240211094609.2223-1-karelb@gimli.ms.mff.cuni.cz/
RFC v2:
- Merge with the regulators series to have multiple devices and thus
justify the use of the MFD framework.
- Rebase on v6.8-rc3.
- Reorder patches.
- MFD RFC v1: https://lore.kernel.org/all/20231217131838.7569-1-karelb@gimli.ms.mff.cuni.cz/
- regulators RFC v1: https://lore.kernel.org/all/20231228100208.2932-1-karelb@gimli.ms.mff.cuni.cz/
Karel Balej (5):
dt-bindings: mfd: add entry for Marvell 88PM886 PMIC
mfd: add driver for Marvell 88PM886 PMIC
regulator: add regulators driver for Marvell 88PM886 PMIC
input: add onkey driver for Marvell 88PM886 PMIC
MAINTAINERS: add myself for Marvell 88PM886 PMIC
.../bindings/mfd/marvell,88pm886-a1.yaml | 76 +++++++
MAINTAINERS | 9 +
drivers/input/misc/88pm886-onkey.c | 92 ++++++++
drivers/input/misc/Kconfig | 7 +
drivers/input/misc/Makefile | 1 +
drivers/mfd/88pm886.c | 210 ++++++++++++++++++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/regulator/88pm886-regulator.c | 195 ++++++++++++++++
drivers/regulator/Kconfig | 6 +
drivers/regulator/Makefile | 1 +
include/linux/mfd/88pm886.h | 46 ++++
12 files changed, 656 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/marvell,88pm886-a1.yaml
create mode 100644 drivers/input/misc/88pm886-onkey.c
create mode 100644 drivers/mfd/88pm886.c
create mode 100644 drivers/regulator/88pm886-regulator.c
create mode 100644 include/linux/mfd/88pm886.h
--
2.44.0
next reply other threads:[~2024-03-03 10:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-03 10:04 Karel Balej [this message]
2024-03-03 10:04 ` [RFC PATCH v3 1/5] dt-bindings: mfd: add entry for Marvell 88PM886 PMIC Karel Balej
2024-03-04 8:03 ` Krzysztof Kozlowski
2024-03-03 10:04 ` [RFC PATCH v3 2/5] mfd: add driver " Karel Balej
2024-03-05 11:44 ` Lee Jones
2024-03-05 18:53 ` Karel Balej
2024-03-07 8:16 ` Lee Jones
2024-03-03 10:04 ` [RFC PATCH v3 3/5] regulator: add regulators " Karel Balej
2024-03-03 10:04 ` [RFC PATCH v3 4/5] input: add onkey " Karel Balej
2024-03-03 20:39 ` Dmitry Torokhov
2024-03-04 20:28 ` Karel Balej
2024-03-05 1:10 ` Dmitry Torokhov
2024-03-10 11:35 ` Karel Balej
2024-03-10 20:35 ` Krzysztof Kozlowski
2024-03-10 21:48 ` Dmitry Torokhov
2024-03-11 10:26 ` Karel Balej
2024-03-11 10:41 ` Krzysztof Kozlowski
2024-03-11 12:12 ` Karel Balej
2024-03-11 16:18 ` Dmitry Torokhov
2024-03-03 10:04 ` [RFC PATCH v3 5/5] MAINTAINERS: add myself " Karel Balej
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240303101506.4187-1-karelb@gimli.ms.mff.cuni.cz \
--to=karelb@gimli.ms.mff.cuni.cz \
--cc=balejk@matfyz.cz \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=duje.mihanovic@skole.hr \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.