[PATCH v2] cmd: nand: Add support to print the manufacturer, model and size

[Mihai Sain <mihai.sain@microchip.com>]

Add support to nand info for printing the manufacturer,model and size.
The manufacturer and model are printed only for ONFI flashes.

U-Boot> nand info

Device 0: nand0, sector size 256 KiB
  Manufacturer  MACRONIX
  Model         MX30LF4G28AD
  Device size        512 MiB
  Page size         4096 b
  OOB size           256 b
  Erase size      262144 b
  ecc strength         8 bits
  ecc step size      512 b
  subpagesize       4096 b
  options       0x00004200
  bbt options   0x00028000

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>

Changes in v2:
--------------
* use #ifdef directive for ONFI flashes.
* use unsigned int for chipsize.
---
 cmd/nand.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/cmd/nand.c b/cmd/nand.c
index fe834c4ac5..5773246d64 100644
--- a/cmd/nand.c
+++ b/cmd/nand.c
@@ -418,6 +418,11 @@ static void nand_print_and_set_info(int idx)
 		printf("%dx ", chip->numchips);
 	printf("%s, sector size %u KiB\n",
 	       mtd->name, mtd->erasesize >> 10);
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+	printf("  Manufacturer  %s \n", chip->onfi_params.manufacturer);
+	printf("  Model         %s \n", chip->onfi_params.model);
+#endif
+	printf("  Device size   %8u MiB\n", (unsigned int)(chip->chipsize >> 20));
 	printf("  Page size     %8d b\n", mtd->writesize);
 	printf("  OOB size      %8d b\n", mtd->oobsize);
 	printf("  Erase size    %8d b\n", mtd->erasesize);
-- 
2.44.0