On Tue, Mar 19, 2024 at 03:40:53AM -0400, Michael S. Tsirkin wrote: > On Tue, Mar 19, 2024 at 12:32:26AM -0700, syzbot wrote: > > Hello, > > > > syzbot found the following issue on: > > > > HEAD commit: b3603fcb79b1 Merge tag 'dlm-6.9' of git://git.kernel.org/p.. > > git tree: upstream > > console output: https://syzkaller.appspot.com/x/log.txt?x=10f04c81180000 > > kernel config: https://syzkaller.appspot.com/x/.config?x=fcb5bfbee0a42b54 > > dashboard link: https://syzkaller.appspot.com/bug?extid=70f57d8a3ae84934c003 > > compiler: Debian clang version 15.0.6, GNU ld (GNU Binutils for Debian) 2.40 > > > > Downloadable assets: > > disk image: https://storage.googleapis.com/syzbot-assets/43969dffd4a6/disk-b3603fcb.raw.xz > > vmlinux: https://storage.googleapis.com/syzbot-assets/ef48ab3b378b/vmlinux-b3603fcb.xz > > kernel image: https://storage.googleapis.com/syzbot-assets/728f5ff2b6fe/bzImage-b3603fcb.xz > > > > IMPORTANT: if you fix the issue, please add the following tag to the commit: > > Reported-by: syzbot+70f57d8a3ae84934c003@syzkaller.appspotmail.com > > > > Key type pkcs7_test registered > > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) > > io scheduler mq-deadline registered > > io scheduler kyber registered > > io scheduler bfq registered > > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > > ACPI: button: Power Button [PWRF] > > input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 > > ACPI: button: Sleep Button [SLPF] > > ioatdma: Intel(R) QuickData Technology Driver 5.00 > > ACPI: \_SB_.LNKC: Enabled at IRQ 11 > > virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver > > ACPI: \_SB_.LNKD: Enabled at IRQ 10 > > virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver > > ACPI: \_SB_.LNKB: Enabled at IRQ 10 > > virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver > > virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver > > N_HDLC line discipline registered with maxframe=4096 > > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A > > 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A > > 00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A > > 00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A > > Non-volatile memory driver v1.3 > > Linux agpgart interface v0.103 > > ACPI: bus type drm_connector registered > > [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 > > [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1 > > Console: switching to colour frame buffer device 128x48 > > platform vkms: [drm] fb0: vkmsdrmfb frame buffer device > > usbcore: registered new interface driver udl > > brd: module loaded > > loop: module loaded > > zram: Added device: zram0 > > null_blk: disk nullb0 created > > null_blk: module loaded > > Guest personality initialized and is inactive > > VMCI host device registered (name=vmci, major=10, minor=118) > > Initialized host personality > > usbcore: registered new interface driver rtsx_usb > > usbcore: registered new interface driver viperboard > > usbcore: registered new interface driver dln2 > > usbcore: registered new interface driver pn533_usb > > nfcsim 0.2 initialized > > usbcore: registered new interface driver port100 > > usbcore: registered new interface driver nfcmrvl > > Loading iSCSI transport class v2.0-870. > > virtio_scsi virtio0: 1/0/0 default/read/poll queues > > ------------[ cut here ]------------ > > refcount_t: decrement hit 0; leaking memory. > > WARNING: CPU: 0 PID: 1 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31 > > Modules linked in: > > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.8.0-syzkaller-11567-gb3603fcb79b1 #0 > > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 > > RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31 > > Code: b2 00 00 00 e8 57 d4 f2 fc 5b 5d c3 cc cc cc cc e8 4b d4 f2 fc c6 05 0c f9 ef 0a 01 90 48 c7 c7 a0 5d 1e 8c e8 b7 75 b5 fc 90 <0f> 0b 90 90 eb d9 e8 2b d4 f2 fc c6 05 e9 f8 ef 0a 01 90 48 c7 c7 > > RSP: 0000:ffffc90000066e18 EFLAGS: 00010246 > > RAX: 76f86e452fcad900 RBX: ffff8880210d2aec RCX: ffff888016ac8000 > > RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 > > RBP: 0000000000000004 R08: ffffffff8157ffe2 R09: fffffbfff1c396e0 > > R10: dffffc0000000000 R11: fffffbfff1c396e0 R12: ffffea000502cdc0 > > R13: ffffea000502cdc8 R14: 1ffffd4000a059b9 R15: 0000000000000000 > > FS: 0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 > > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > CR2: ffff88823ffff000 CR3: 000000000e132000 CR4: 00000000003506f0 > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > Call Trace: > > > > reset_page_owner include/linux/page_owner.h:25 [inline] > > free_pages_prepare mm/page_alloc.c:1141 [inline] > > __free_pages_ok+0xc54/0xd80 mm/page_alloc.c:1270 > > make_alloc_exact+0xa3/0xf0 mm/page_alloc.c:4829 > > vring_alloc_queue drivers/virtio/virtio_ring.c:319 [inline] > > vring_alloc_queue_split+0x20a/0x600 drivers/virtio/virtio_ring.c:1108 > > vring_create_virtqueue_split+0xc6/0x310 drivers/virtio/virtio_ring.c:1158 > > vring_create_virtqueue+0xca/0x110 drivers/virtio/virtio_ring.c:2683 > > setup_vq+0xe9/0x2d0 drivers/virtio/virtio_pci_legacy.c:131 > > vp_setup_vq+0xbf/0x330 drivers/virtio/virtio_pci_common.c:189 > > vp_find_vqs_msix+0x8b2/0xc80 drivers/virtio/virtio_pci_common.c:331 > > vp_find_vqs+0x4c/0x4e0 drivers/virtio/virtio_pci_common.c:408 > > virtio_find_vqs include/linux/virtio_config.h:233 [inline] > > virtscsi_init+0x8db/0xd00 drivers/scsi/virtio_scsi.c:887 > > virtscsi_probe+0x3ea/0xf60 drivers/scsi/virtio_scsi.c:945 > > virtio_dev_probe+0x991/0xaf0 drivers/virtio/virtio.c:311 > > really_probe+0x29e/0xc50 drivers/base/dd.c:658 > > __driver_probe_device+0x1a2/0x3e0 drivers/base/dd.c:800 > > driver_probe_device+0x50/0x430 drivers/base/dd.c:830 > > __driver_attach+0x45f/0x710 drivers/base/dd.c:1216 > > bus_for_each_dev+0x239/0x2b0 drivers/base/bus.c:368 > > bus_add_driver+0x347/0x620 drivers/base/bus.c:673 > > driver_register+0x23a/0x320 drivers/base/driver.c:246 > > virtio_scsi_init+0x65/0xe0 drivers/scsi/virtio_scsi.c:1083 > > do_one_initcall+0x248/0x880 init/main.c:1238 > > do_initcall_level+0x157/0x210 init/main.c:1300 > > do_initcalls+0x3f/0x80 init/main.c:1316 > > kernel_init_freeable+0x435/0x5d0 init/main.c:1548 > > kernel_init+0x1d/0x2b0 init/main.c:1437 > > ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 > > ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 > > > > > > I think I saw this already and also with virtio scsi. virtio > core does not seem to be doing anything special here, > Cc virtio scsi maintainers. The oldest commit that syzkaller found is a memory management pull request: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?id=e5eb28f6d1afebed4bb7d740a797d0390bd3a357 I can't reproduce the issue locally with QEMU 8.2.0 so I don't have a way to bisect. I reviewed the virtio_scsi.c git log and there have been few changes over the last several months. I couldn't spot an issue in this patch, but the most likely virtio-scsi commit is: commit 95e7249691f082a5178d4d6f60fcdee91da458ab Author: Mike Christie Date: Wed Dec 13 23:26:49 2023 -0600 scsi: virtio_scsi: Add mq_poll support Stefan > > > > --- > > This report is generated by a bot. It may contain errors. > > See https://goo.gl/tpsmEJ for more information about syzbot. > > syzbot engineers can be reached at syzkaller@googlegroups.com. > > > > syzbot will keep track of this issue. See: > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > > > If the report is already addressed, let syzbot know by replying with: > > #syz fix: exact-commit-title > > > > If you want to overwrite report's subsystems, reply with: > > #syz set subsystems: new-subsystem > > (See the list of subsystem names on the web dashboard) > > > > If the report is a duplicate of another one, reply with: > > #syz dup: exact-subject-of-another-report > > > > If you want to undo deduplication, reply with: > > #syz undup >