All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, tomi.valkeinen@ideasonboard.com,
	bingbu.cao@intel.com, hongju.wang@intel.com, hverkuil@xs4all.nl,
	Andrey Konovalov <andrey.konovalov@linaro.org>,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Dmitry Perchanov <dmitry.perchanov@intel.com>,
	"Ng, Khai Wen" <khai.wen.ng@intel.com>,
	Alain Volmat <alain.volmat@foss.st.com>
Subject: Re: [PATCH v8 25/38] media: ccs: Remove ccs_get_crop_compose helper
Date: Thu, 21 Mar 2024 20:05:15 +0200	[thread overview]
Message-ID: <20240321180515.GU9582@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20240313072516.241106-26-sakari.ailus@linux.intel.com>

Hi Sakari,

Thank you for the patch.

On Wed, Mar 13, 2024 at 09:25:03AM +0200, Sakari Ailus wrote:
> As it's now easier to obtain the necessary information on crop and compose
> rectangles after moving to sub-device state, remove the
> ccs_get_crop_compose helper.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>  drivers/media/i2c/ccs/ccs-core.c | 130 ++++++++++++++-----------------
>  1 file changed, 58 insertions(+), 72 deletions(-)
> 
> diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
> index 1f91af25eac6..6c7eb4f04070 100644
> --- a/drivers/media/i2c/ccs/ccs-core.c
> +++ b/drivers/media/i2c/ccs/ccs-core.c
> @@ -2222,24 +2222,6 @@ static int ccs_get_format(struct v4l2_subdev *subdev,
>  	return rval;
>  }
>  
> -static void ccs_get_crop_compose(struct v4l2_subdev *subdev,
> -				 struct v4l2_subdev_state *sd_state,
> -				 struct v4l2_rect **crops,
> -				 struct v4l2_rect **comps)
> -{
> -	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> -	unsigned int i;
> -
> -	if (crops)
> -		for (i = 0; i < subdev->entity.num_pads; i++)
> -			crops[i] =
> -				v4l2_subdev_state_get_crop(sd_state, i,
> -							   CCS_STREAM_PIXEL);
> -	if (comps)
> -		*comps = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> -						       CCS_STREAM_PIXEL);
> -}
> -
>  /* Changes require propagation only on sink pad. */
>  static void ccs_propagate(struct v4l2_subdev *subdev,
>  			  struct v4l2_subdev_state *sd_state, int which,
> @@ -2247,15 +2229,17 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
>  {
>  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
>  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> -	struct v4l2_rect *comp, *crops[CCS_PADS];
> +	struct v4l2_rect *comp, *crop;
>  	struct v4l2_mbus_framefmt *fmt;
>  
> -	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> -
> +	comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> +					     CCS_STREAM_PIXEL);
>  	switch (target) {
>  	case V4L2_SEL_TGT_CROP:
> -		comp->width = crops[CCS_PAD_SINK]->width;
> -		comp->height = crops[CCS_PAD_SINK]->height;
> +		crop = v4l2_subdev_state_get_crop(sd_state, CCS_PAD_SINK,
> +						  CCS_STREAM_PIXEL);
> +		comp->width = crop->width;
> +		comp->height = crop->height;
>  		if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
>  			if (ssd == sensor->scaler) {
>  				sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
> @@ -2269,13 +2253,15 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
>  		}
>  		fallthrough;
>  	case V4L2_SEL_TGT_COMPOSE:
> -		*crops[CCS_PAD_SRC] = *comp;
> +		crop = v4l2_subdev_state_get_crop(sd_state, CCS_PAD_SRC,
> +						  CCS_STREAM_PIXEL);
> +		*crop = *comp;
>  		fmt = v4l2_subdev_state_get_format(sd_state, CCS_PAD_SRC,
>  						   CCS_STREAM_PIXEL);
>  		fmt->width = comp->width;
>  		fmt->height = comp->height;
>  		if (which == V4L2_SUBDEV_FORMAT_ACTIVE && ssd == sensor->src)
> -			sensor->src_src = *crops[CCS_PAD_SRC];
> +			sensor->src_src = *crop;
>  		break;
>  	default:
>  		WARN_ON_ONCE(1);
> @@ -2416,7 +2402,7 @@ static int ccs_set_format(struct v4l2_subdev *subdev,
>  {
>  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
>  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> -	struct v4l2_rect *crops[CCS_PADS];
> +	struct v4l2_rect *crop;
>  
>  	if (subdev == &sensor->src->sd && fmt->pad == CCS_PAD_META)
>  		return ccs_get_format(subdev, sd_state, fmt);
> @@ -2458,12 +2444,13 @@ static int ccs_set_format(struct v4l2_subdev *subdev,
>  		      CCS_LIM(sensor, MIN_Y_OUTPUT_SIZE),
>  		      CCS_LIM(sensor, MAX_Y_OUTPUT_SIZE));
>  
> -	ccs_get_crop_compose(subdev, sd_state, crops, NULL);
> +	crop = v4l2_subdev_state_get_crop(sd_state, ssd->sink_pad,
> +					  CCS_STREAM_PIXEL);
>  
> -	crops[ssd->sink_pad]->left = 0;
> -	crops[ssd->sink_pad]->top = 0;
> -	crops[ssd->sink_pad]->width = fmt->format.width;
> -	crops[ssd->sink_pad]->height = fmt->format.height;
> +	crop->left = 0;
> +	crop->top = 0;
> +	crop->width = fmt->format.width;
> +	crop->height = fmt->format.height;
>  	ccs_propagate(subdev, sd_state, fmt->which, V4L2_SEL_TGT_CROP);
>  
>  	mutex_unlock(&sensor->mutex);
> @@ -2518,24 +2505,23 @@ static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
>  static void ccs_set_compose_binner(struct v4l2_subdev *subdev,
>  				   struct v4l2_subdev_state *sd_state,
>  				   struct v4l2_subdev_selection *sel,
> -				   struct v4l2_rect **crops,
> +				   struct v4l2_rect *sink_crop,

const

>  				   struct v4l2_rect *comp)
>  {
>  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
>  	unsigned int i;
>  	unsigned int binh = 1, binv = 1;
>  	int best = scaling_goodness(
> -		subdev,
> -		crops[CCS_PAD_SINK]->width, sel->r.width,
> -		crops[CCS_PAD_SINK]->height, sel->r.height, sel->flags);
> +		subdev,	sink_crop->width, sel->r.width,

s/\tsink_crop/ sink_crop/

> +		sink_crop->height, sel->r.height, sel->flags);

	int best = scaling_goodness(subdev, sink_crop->width, sel->r.width,
				    sink_crop->height, sel->r.height,
				    sel->flags);

>  
>  	for (i = 0; i < sensor->nbinning_subtypes; i++) {
>  		int this = scaling_goodness(
>  			subdev,
> -			crops[CCS_PAD_SINK]->width
> +			sink_crop->width
>  			/ sensor->binning_subtypes[i].horizontal,
>  			sel->r.width,
> -			crops[CCS_PAD_SINK]->height
> +			sink_crop->height
>  			/ sensor->binning_subtypes[i].vertical,
>  			sel->r.height, sel->flags);

You know this is horrible to read, right ? :-)

>  
> @@ -2550,8 +2536,8 @@ static void ccs_set_compose_binner(struct v4l2_subdev *subdev,
>  		sensor->binning_horizontal = binh;
>  	}
>  
> -	sel->r.width = (crops[CCS_PAD_SINK]->width / binh) & ~1;
> -	sel->r.height = (crops[CCS_PAD_SINK]->height / binv) & ~1;
> +	sel->r.width = (sink_crop->width / binh) & ~1;
> +	sel->r.height = (sink_crop->height / binv) & ~1;
>  }
>  
>  /*
> @@ -2566,7 +2552,7 @@ static void ccs_set_compose_binner(struct v4l2_subdev *subdev,
>  static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
>  				   struct v4l2_subdev_state *sd_state,
>  				   struct v4l2_subdev_selection *sel,
> -				   struct v4l2_rect **crops,
> +				   struct v4l2_rect *sink_crop,

const

>  				   struct v4l2_rect *comp)
>  {
>  	struct i2c_client *client = v4l2_get_subdevdata(subdev);
> @@ -2579,17 +2565,12 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
>  	unsigned int i;
>  	int best = INT_MIN;
>  
> -	sel->r.width = min_t(unsigned int, sel->r.width,
> -			     crops[CCS_PAD_SINK]->width);
> -	sel->r.height = min_t(unsigned int, sel->r.height,
> -			      crops[CCS_PAD_SINK]->height);
> -
> -	a = crops[CCS_PAD_SINK]->width
> -		* CCS_LIM(sensor, SCALER_N_MIN) / sel->r.width;
> -	b = crops[CCS_PAD_SINK]->height
> -		* CCS_LIM(sensor, SCALER_N_MIN) / sel->r.height;
> -	max_m = crops[CCS_PAD_SINK]->width
> -		* CCS_LIM(sensor, SCALER_N_MIN)
> +	sel->r.width = min_t(unsigned int, sel->r.width, sink_crop->width);
> +	sel->r.height = min_t(unsigned int, sel->r.height, sink_crop->height);
> +
> +	a = sink_crop->width * CCS_LIM(sensor, SCALER_N_MIN) / sel->r.width;
> +	b = sink_crop->height * CCS_LIM(sensor, SCALER_N_MIN) / sel->r.height;
> +	max_m = sink_crop->width * CCS_LIM(sensor, SCALER_N_MIN)
>  		/ CCS_LIM(sensor, MIN_X_OUTPUT_SIZE);
>  
>  	a = clamp(a, CCS_LIM(sensor, SCALER_M_MIN),
> @@ -2622,10 +2603,10 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
>  	for (i = 0; i < ntry; i++) {
>  		int this = scaling_goodness(
>  			subdev,
> -			crops[CCS_PAD_SINK]->width
> +			sink_crop->width
>  			/ try[i] * CCS_LIM(sensor, SCALER_N_MIN),
>  			sel->r.width,
> -			crops[CCS_PAD_SINK]->height,
> +			sink_crop->height,
>  			sel->r.height,
>  			sel->flags);
>  
> @@ -2642,12 +2623,10 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
>  			continue;
>  
>  		this = scaling_goodness(
> -			subdev, crops[CCS_PAD_SINK]->width
> -			/ try[i]
> +			subdev, sink_crop->width / try[i]
>  			* CCS_LIM(sensor, SCALER_N_MIN),
>  			sel->r.width,
> -			crops[CCS_PAD_SINK]->height
> -			/ try[i]
> +			sink_crop->height / try[i]
>  			* CCS_LIM(sensor, SCALER_N_MIN),
>  			sel->r.height,
>  			sel->flags);
> @@ -2660,17 +2639,15 @@ static void ccs_set_compose_scaler(struct v4l2_subdev *subdev,
>  	}
>  
>  	sel->r.width =
> -		(crops[CCS_PAD_SINK]->width
> -		 / scale_m
> +		(sink_crop->width / scale_m
>  		 * CCS_LIM(sensor, SCALER_N_MIN)) & ~1;

	sel->r.width = (sink_crop->width / scale_m
		* CCS_LIM(sensor, SCALER_N_MIN)) & ~1;

>  	if (mode == SMIAPP_SCALING_MODE_BOTH)
>  		sel->r.height =
> -			(crops[CCS_PAD_SINK]->height
> -			 / scale_m
> +			(sink_crop->height / scale_m
>  			 * CCS_LIM(sensor, SCALER_N_MIN))
>  			& ~1;
>  	else
> -		sel->r.height = crops[CCS_PAD_SINK]->height;
> +		sel->r.height = sink_crop->height;
>  
>  	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
>  		sensor->scale_m = scale_m;
> @@ -2684,17 +2661,20 @@ static int ccs_set_compose(struct v4l2_subdev *subdev,
>  {
>  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
>  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> -	struct v4l2_rect *comp, *crops[CCS_PADS];
> +	struct v4l2_rect *comp, *sink_crop;

sink_crop can be const.

>  
> -	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> +	sink_crop = v4l2_subdev_state_get_crop(sd_state, CCS_PAD_SINK,
> +					       CCS_STREAM_PIXEL);
> +	comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> +					     CCS_STREAM_PIXEL);
>  
>  	sel->r.top = 0;
>  	sel->r.left = 0;
>  
>  	if (ssd == sensor->binner)
> -		ccs_set_compose_binner(subdev, sd_state, sel, crops, comp);
> +		ccs_set_compose_binner(subdev, sd_state, sel, sink_crop, comp);
>  	else
> -		ccs_set_compose_scaler(subdev, sd_state, sel, crops, comp);
> +		ccs_set_compose_scaler(subdev, sd_state, sel, sink_crop, comp);
>  
>  	*comp = sel->r;
>  	ccs_propagate(subdev, sd_state, sel->which, V4L2_SEL_TGT_COMPOSE);
> @@ -2755,9 +2735,12 @@ static int ccs_set_crop(struct v4l2_subdev *subdev,
>  {
>  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
>  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> -	struct v4l2_rect src_size = { 0 }, *crops[CCS_PADS], *comp;
> +	struct v4l2_rect src_size = { 0 }, *crop, *comp;

comp can be const.

>  
> -	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> +	crop = v4l2_subdev_state_get_crop(sd_state, sel->pad,
> +					  CCS_STREAM_PIXEL);
> +	comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> +					     CCS_STREAM_PIXEL);
>  
>  	if (sel->pad == ssd->sink_pad) {
>  		struct v4l2_mbus_framefmt *mfmt =
> @@ -2781,7 +2764,7 @@ static int ccs_set_crop(struct v4l2_subdev *subdev,
>  	sel->r.left = min_t(int, sel->r.left, src_size.width - sel->r.width);
>  	sel->r.top = min_t(int, sel->r.top, src_size.height - sel->r.height);
>  
> -	*crops[sel->pad] = sel->r;
> +	*crop = sel->r;
>  
>  	if (ssd != sensor->pixel_array && sel->pad == CCS_PAD_SINK)
>  		ccs_propagate(subdev, sd_state, sel->which, V4L2_SEL_TGT_CROP);
> @@ -2806,14 +2789,17 @@ static int ccs_get_selection(struct v4l2_subdev *subdev,
>  {
>  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
>  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> -	struct v4l2_rect *comp, *crops[CCS_PADS];
> +	struct v4l2_rect *crop, *comp;

const

>  	int ret;
>  
>  	ret = ccs_sel_supported(subdev, sel);
>  	if (ret)
>  		return ret;
>  
> -	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> +	crop = v4l2_subdev_state_get_crop(sd_state, sel->pad,
> +					  CCS_STREAM_PIXEL);
> +	comp = v4l2_subdev_state_get_compose(sd_state, ssd->sink_pad,
> +					     CCS_STREAM_PIXEL);
>  
>  	switch (sel->target) {
>  	case V4L2_SEL_TGT_CROP_BOUNDS:
> @@ -2835,7 +2821,7 @@ static int ccs_get_selection(struct v4l2_subdev *subdev,
>  		break;
>  	case V4L2_SEL_TGT_CROP:
>  	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> -		sel->r = *crops[sel->pad];
> +		sel->r = *crop;
>  		break;
>  	case V4L2_SEL_TGT_COMPOSE:
>  		sel->r = *comp;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2024-03-21 18:05 UTC|newest]

Thread overview: 149+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-13  7:24 [PATCH v8 00/38] Generic line based metadata support, internal pads Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 01/38] media: mc: Add INTERNAL pad flag Sakari Ailus
2024-03-14  7:17   ` Tomi Valkeinen
2024-03-19 13:21     ` Sakari Ailus
2024-03-19 22:17     ` Laurent Pinchart
2024-03-20  7:49       ` Sakari Ailus
2024-03-21 17:20         ` Laurent Pinchart
2024-03-28  9:47           ` Sakari Ailus
2024-03-28 10:05             ` Sakari Ailus
2024-03-28 15:25             ` Laurent Pinchart
2024-04-11  7:25               ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 02/38] media: Documentation: Add "stream" into glossary Sakari Ailus
2024-03-14  7:18   ` Tomi Valkeinen
2024-03-19 22:20   ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 03/38] media: uapi: Add generic serial metadata mbus formats Sakari Ailus
2024-03-14  7:30   ` Tomi Valkeinen
2024-03-19 13:27     ` Sakari Ailus
2024-03-19 14:20       ` Tomi Valkeinen
2024-03-19 22:33         ` Laurent Pinchart
2024-03-19 23:00           ` Laurent Pinchart
2024-03-20  8:48             ` Sakari Ailus
2024-03-21 17:30               ` Laurent Pinchart
2024-03-22  6:50           ` Tomi Valkeinen
2024-03-25 14:02             ` Sakari Ailus
2024-03-20  8:36         ` Sakari Ailus
2024-03-19 22:59   ` Laurent Pinchart
2024-03-20 16:23     ` Sakari Ailus
2024-03-21 17:38       ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 04/38] media: uapi: Document which mbus format fields are valid for metadata Sakari Ailus
2024-03-14 15:23   ` Tomi Valkeinen
2024-03-19 23:14   ` Laurent Pinchart
2024-03-20 16:49     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 05/38] media: uapi: Add generic 8-bit metadata format definitions Sakari Ailus
2024-03-19 23:37   ` Laurent Pinchart
2024-04-15 14:05     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 06/38] media: v4l: Support line-based metadata capture Sakari Ailus
2024-03-19 23:40   ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 07/38] media: Documentation: Additional streams generally don't harm capture Sakari Ailus
2024-03-19 23:48   ` Laurent Pinchart
2024-04-15 14:27     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 08/38] media: Documentation: Document embedded data guidelines for camera sensors Sakari Ailus
2024-03-15 14:49   ` Julien Massot
2024-03-20  0:03   ` Laurent Pinchart
2024-04-09 11:12     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 09/38] media: Documentation: v4l: Document internal source pads Sakari Ailus
2024-03-15 15:32   ` Julien Massot
2024-03-19 13:47     ` Sakari Ailus
2024-03-19 14:38       ` Julien Massot
2024-03-20  0:26       ` Laurent Pinchart
2024-04-09 12:14         ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 10/38] media: Documentation: Document S_ROUTING behaviour Sakari Ailus
2024-03-15 15:38   ` Julien Massot
2024-03-20  0:33   ` Laurent Pinchart
2024-04-11  8:02     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 11/38] media: v4l: subdev: Add a function to lock two sub-device states, use it Sakari Ailus
2024-03-15 15:42   ` Julien Massot
2024-03-20  0:36   ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 12/38] media: v4l: subdev: Move G_ROUTING handling below S_ROUTING Sakari Ailus
2024-03-15 15:43   ` Julien Massot
2024-03-20  0:37   ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 13/38] media: v4l: subdev: Copy argument back to user also for S_ROUTING Sakari Ailus
2024-03-15 15:50   ` Julien Massot
2024-03-20  0:39   ` Laurent Pinchart
2024-04-11  8:06     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 14/38] media: v4l: subdev: Add len_routes field to struct v4l2_subdev_routing Sakari Ailus
2024-03-20  1:36   ` Laurent Pinchart
2024-04-16  7:09     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 15/38] media: v4l: subdev: Return routes set using S_ROUTING Sakari Ailus
2024-03-20  1:45   ` Laurent Pinchart
2024-04-16  7:12     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 16/38] media: v4l: subdev: Allow a larger number of routes than there's room for Sakari Ailus
2024-03-20  1:53   ` Laurent Pinchart
2024-04-16  8:08     ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 17/38] media: v4l: subdev: Add trivial set_routing support Sakari Ailus
2024-03-15 15:51   ` Julien Massot
2024-03-20  1:55   ` Laurent Pinchart
2024-04-01 23:41     ` Laurent Pinchart
2024-04-11  8:13       ` Sakari Ailus
2024-04-12 19:14         ` Laurent Pinchart
2024-04-15  8:10           ` Sakari Ailus
2024-03-13  7:24 ` [PATCH v8 18/38] media: ccs: No need to set streaming to false in power off Sakari Ailus
2024-03-13  9:31   ` Kieran Bingham
2024-03-21 16:35   ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 19/38] media: ccs: Use {enable,disable}_streams operations Sakari Ailus
2024-03-21 16:21   ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 20/38] media: ccs: Track streaming state Sakari Ailus
2024-03-15 15:56   ` Julien Massot
2024-03-21 16:36   ` Laurent Pinchart
2024-03-13  7:24 ` [PATCH v8 21/38] media: ccs: Move ccs_validate_csi_data_format up Sakari Ailus
2024-03-15 15:57   ` Julien Massot
2024-03-21 16:37   ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 22/38] media: ccs: Support frame descriptors Sakari Ailus
2024-03-15 16:02   ` Julien Massot
2024-03-21 16:44   ` Laurent Pinchart
2024-04-11  8:33     ` Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 23/38] media: uapi: ccs: Add media bus code for MIPI CCS embedded data Sakari Ailus
2024-03-15 16:03   ` Julien Massot
2024-03-21 16:49   ` Laurent Pinchart
2024-04-11  9:04     ` Sakari Ailus
2024-04-12 19:07       ` Laurent Pinchart
2024-04-14 10:48         ` Sakari Ailus
2024-04-20  8:07           ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 24/38] media: ccs: Add support for embedded data stream Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 25/38] media: ccs: Remove ccs_get_crop_compose helper Sakari Ailus
2024-03-21 18:05   ` Laurent Pinchart [this message]
2024-04-16  7:30     ` Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 26/38] media: ccs: Rely on sub-device state locking Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 27/38] media: ccs: Compute binning configuration from sub-device state Sakari Ailus
2024-03-21 17:57   ` Laurent Pinchart
2024-04-16  8:01     ` Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 28/38] media: ccs: Compute scaling " Sakari Ailus
2024-03-21 17:50   ` Laurent Pinchart
2024-04-16  7:59     ` Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 29/38] media: ccs: Remove which parameter from ccs_propagate Sakari Ailus
2024-03-21 17:39   ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 30/38] media: Documentation: ccs: Document routing Sakari Ailus
2024-03-21 17:43   ` Laurent Pinchart
2024-04-16  7:37     ` Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 31/38] media: uapi: v4l: subdev: Enable streams API Sakari Ailus
2024-03-21 16:51   ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 32/38] media: uapi: Add media bus code for ov2740 embedded data Sakari Ailus
2024-03-15 16:10   ` Julien Massot
2024-03-21 16:54   ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 33/38] media: ov2740: Switch to {enable,disable}_streams Sakari Ailus
2024-03-15 16:13   ` Julien Massot
2024-03-21 16:56   ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 34/38] media: ov2740: Track streaming state Sakari Ailus
2024-03-15 16:13   ` Julien Massot
2024-03-21 16:57   ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 35/38] media: ov2740: Add support for embedded data Sakari Ailus
2024-03-14  7:00   ` Bingbu Cao
2024-03-19 13:13     ` Sakari Ailus
2024-03-14  8:24   ` Julien Massot
2024-03-19 13:18     ` Sakari Ailus
2024-03-21 17:16   ` Laurent Pinchart
2024-04-10 13:18     ` Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 36/38] media: v4l: Add V4L2_SUBDEV_ROUTE_FL_IMMUTABLE sub-device routing flag Sakari Ailus
2024-03-13  7:34   ` Tomi Valkeinen
2024-03-13  7:39     ` Sakari Ailus
2024-03-21 17:03       ` Laurent Pinchart
2024-04-09 13:21         ` Sakari Ailus
2024-04-09 15:21           ` Laurent Pinchart
2024-03-13  7:25 ` [PATCH v8 37/38] media: ccs: Add IMMUTABLE route flag Sakari Ailus
2024-03-15 16:08   ` Julien Massot
2024-03-21 16:59   ` Laurent Pinchart
2024-04-11  9:06     ` Sakari Ailus
2024-03-13  7:25 ` [PATCH v8 38/38] media: ov2740: " Sakari Ailus
2024-03-15 16:14   ` Julien Massot
2024-03-21 17:00   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240321180515.GU9582@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=alain.volmat@foss.st.com \
    --cc=andrey.konovalov@linaro.org \
    --cc=bingbu.cao@intel.com \
    --cc=dmitry.perchanov@intel.com \
    --cc=hongju.wang@intel.com \
    --cc=hverkuil@xs4all.nl \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=khai.wen.ng@intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.