From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: Stefano Babic <sbabic@denx.de>,
Fabio Estevam <festevam@gmail.com>,
"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Sumit Garg <sumit.garg@linaro.org>, Tom Rini <trini@konsulko.com>,
u-boot@lists.denx.de, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH v2 6/6] imx: imx93-11x11-evk: convert to OF_UPSTREAM
Date: Thu, 28 Mar 2024 08:46:52 +0800 [thread overview]
Message-ID: <20240328-imx93-of-v2-6-909f5d37da87@nxp.com> (raw)
In-Reply-To: <20240328-imx93-of-v2-0-909f5d37da87@nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Convert to OF_UPSTREAM for i.MX93 11x11 EVK.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/Makefile | 1 -
arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 118 +++++++++++
arch/arm/dts/imx93-11x11-evk.dts | 322 -------------------------------
arch/arm/dts/imx93-u-boot.dtsi | 15 ++
arch/arm/mach-imx/imx9/Kconfig | 1 +
configs/imx93_11x11_evk_defconfig | 2 +-
configs/imx93_11x11_evk_ld_defconfig | 2 +-
7 files changed, 136 insertions(+), 325 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d85a33055c9..71c2facfb5e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1115,7 +1115,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mq-librem5-r4.dtb
dtb-$(CONFIG_ARCH_IMX9) += \
- imx93-11x11-evk.dtb \
imx93-var-som-symphony.dtb \
imx93-phyboard-segin.dtb
diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
index a99ba99bfb4..408e601bc90 100644
--- a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi
@@ -26,6 +26,111 @@
bootph-pre-ram;
};
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-1 = <&pinctrl_lpi2c2>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2237500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5{
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ adp5585gpio: gpio@34 {
+ compatible = "adp5585";
+ reg = <0x34>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
&aips1 {
bootph-pre-ram;
bootph-all;
@@ -44,6 +149,19 @@
&iomuxc {
bootph-pre-ram;
bootph-some-ram;
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
+ MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcal6524: pcal6524grp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
};
®_usdhc2_vmmc {
diff --git a/arch/arm/dts/imx93-11x11-evk.dts b/arch/arm/dts/imx93-11x11-evk.dts
deleted file mode 100644
index 4322cc3e11b..00000000000
--- a/arch/arm/dts/imx93-11x11-evk.dts
+++ /dev/null
@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 NXP
- */
-
-/dts-v1/;
-
-#include "imx93.dtsi"
-
-/ {
- model = "NXP i.MX93 11X11 EVK board";
- compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
-
- chosen {
- stdout-path = &lpuart1;
- };
-
- reg_vref_1v8: regulator-adc-vref {
- compatible = "regulator-fixed";
- regulator-name = "vref_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&adc1 {
- vref-supply = <®_vref_1v8>;
- status = "okay";
-};
-
-&mu1 {
- status = "okay";
-};
-
-&mu2 {
- status = "okay";
-};
-
-&eqos {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eqos>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy1>;
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <5000000>;
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- eee-broken-1000t;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy2>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <5000000>;
-
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- eee-broken-1000t;
- };
- };
-};
-
-&lpi2c2 {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pinctrl_lpi2c2>;
- pinctrl-1 = <&pinctrl_lpi2c2>;
- status = "okay";
-
- pmic@25 {
- compatible = "nxp,pca9451a";
- reg = <0x25>;
- interrupt-parent = <&pcal6524>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
- regulators {
- buck1: BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <650000>;
- regulator-max-microvolt = <2237500>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck2: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck4: BUCK4{
- regulator-name = "BUCK4";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5: BUCK5{
- regulator-name = "BUCK5";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6: BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo5: LDO5 {
- regulator-name = "LDO5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-
- pcal6524: gpio@22 {
- compatible = "nxp,pcal6524";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcal6524>;
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- };
-
- adp5585gpio: gpio@34 {
- compatible = "adp5585";
- reg = <0x34>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&lpuart1 { /* console */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1>;
- pinctrl-2 = <&pinctrl_usdhc1>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_usdhc2_vmmc>;
- bus-width = <4>;
- status = "okay";
- no-sdio;
- no-mmc;
-};
-
-&iomuxc {
- pinctrl_lpi2c2: lpi2c2grp {
- fsl,pins = <
- MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
- MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
- >;
- };
-
- pinctrl_pcal6524: pcal6524grp {
- fsl,pins = <
- MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
- >;
- };
-
- pinctrl_eqos: eqosgrp {
- fsl,pins = <
- MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e
- MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
- MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
- MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
- MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
- MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
- MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
- MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
- MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
- MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
- MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
- MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
- MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe
- MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
- >;
- };
-
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e
- MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e
- MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
- MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
- MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
- MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
- MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
- MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
- MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
- MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
- MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
- MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
- MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe
- MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
- MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
- MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe
- MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
- MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
- MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
- MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
- MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
- MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
- MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
- MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
- MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
- >;
- };
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
- fsl,pins = <
- MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2gpiogrp {
- fsl,pins = <
- MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
- MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe
- MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
- MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
- MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
- MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
- MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
- >;
- };
-};
diff --git a/arch/arm/dts/imx93-u-boot.dtsi b/arch/arm/dts/imx93-u-boot.dtsi
index 40e17bbc5ae..289aba17584 100644
--- a/arch/arm/dts/imx93-u-boot.dtsi
+++ b/arch/arm/dts/imx93-u-boot.dtsi
@@ -86,3 +86,18 @@
};
};
};
+
+&tmu {
+ compatible = "fsl,imx93-tmu";
+ reg = <0x44482000 0x1000>;
+ clocks = <&clk IMX93_CLK_TMC_GATE>;
+ little-endian;
+ fsl,tmu-calibration = <0x0000000e 0x800000da
+ 0x00000029 0x800000e9
+ 0x00000056 0x80000102
+ 0x000000a2 0x8000012a
+ 0x00000116 0x80000166
+ 0x00000195 0x800001a7
+ 0x000001b2 0x800001b6>;
+ #thermal-sensor-cells = <1>;
+};
diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
index b79485f1f75..e892da80fe8 100644
--- a/arch/arm/mach-imx/imx9/Kconfig
+++ b/arch/arm/mach-imx/imx9/Kconfig
@@ -31,6 +31,7 @@ choice
config TARGET_IMX93_11X11_EVK
bool "imx93_11x11_evk"
select IMX93
+ imply OF_UPSTREAM
config TARGET_IMX93_VAR_SOM
bool "imx93_var_som"
diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig
index 63613477c7f..a671de7ca40 100644
--- a/configs/imx93_11x11_evk_defconfig
+++ b/configs/imx93_11x11_evk_defconfig
@@ -10,7 +10,7 @@ CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x700000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx93-11x11-evk"
CONFIG_SPL_TEXT_BASE=0x2049A000
CONFIG_TARGET_IMX93_11X11_EVK=y
CONFIG_SYS_MONITOR_LEN=524288
diff --git a/configs/imx93_11x11_evk_ld_defconfig b/configs/imx93_11x11_evk_ld_defconfig
index 4e3bbdd0cf5..4e1f162e35a 100644
--- a/configs/imx93_11x11_evk_ld_defconfig
+++ b/configs/imx93_11x11_evk_ld_defconfig
@@ -10,7 +10,7 @@ CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x400000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx93-11x11-evk"
CONFIG_SPL_TEXT_BASE=0x2049A000
CONFIG_IMX9_LOW_DRIVE_MODE=y
CONFIG_TARGET_IMX93_11X11_EVK=y
--
2.35.3
prev parent reply other threads:[~2024-03-27 23:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-28 0:46 [PATCH v2 0/6] imx93-11x11-evk: convert to OF_UPSTREAM Peng Fan (OSS)
2024-03-27 23:50 ` Peng Fan
2024-03-28 0:46 ` [PATCH v2 1/6] gpio: imx_rgpio2p: support one address Peng Fan (OSS)
2024-03-28 0:46 ` [PATCH v2 2/6] serial: lpuart: use ipg clk for i.MX7ULP Peng Fan (OSS)
2024-03-28 0:46 ` [PATCH v2 3/6] cpu: drop imx9_cpu Peng Fan (OSS)
2024-03-28 0:46 ` [PATCH v2 4/6] clk: imx93: fix anatop base Peng Fan (OSS)
2024-03-28 0:46 ` [PATCH v2 5/6] dt-bindings: imx93: sync clock header Peng Fan (OSS)
2024-03-28 0:46 ` Peng Fan (OSS) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240328-imx93-of-v2-6-909f5d37da87@nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=festevam@gmail.com \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=sumit.garg@linaro.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.