All of lore.kernel.org
 help / color / mirror / Atom feed
From: Judith Mendez <jm@ti.com>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>
Cc: <linux-watchdog@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Rafael Beims <rafael.beims@toradex.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Nick Saulnier <nsaulnier@ti.com>
Subject: [PATCH v3] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
Date: Wed, 17 Apr 2024 15:57:00 -0500	[thread overview]
Message-ID: <20240417205700.3947408-1-jm@ti.com> (raw)

On AM62x, the watchdog is pet before the valid window is open. Fix
min_hw_heartbeat and accommodate a 2% + static offset safety margin.
The static offset accounts for max hardware error.

Remove the hack in the driver which shifts the open window boundary,
since it is no longer necessary due to the fix mentioned above.

cc: stable@vger.kernel.org
Fixes: 5527483f8f7c ("watchdog: rti-wdt: attach to running watchdog during probe")
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- Change safety margin to 2% + max hardware error
- remove hack that shifts open window boundary
---
 drivers/watchdog/rti_wdt.c | 34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 8e1be7ba01039..c7d4de28e1891 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -59,6 +59,8 @@
 #define PON_REASON_EOF_NUM	0xCCCCBBBB
 #define RESERVED_MEM_MIN_SIZE	12
 
+#define MAX_HW_ERROR		250
+
 static int heartbeat = DEFAULT_HEARTBEAT;
 
 /*
@@ -92,7 +94,7 @@ static int rti_wdt_start(struct watchdog_device *wdd)
 	 * to be 50% or less than that; we obviouly want to configure the open
 	 * window as large as possible so we select the 50% option.
 	 */
-	wdd->min_hw_heartbeat_ms = 500 * wdd->timeout;
+	wdd->min_hw_heartbeat_ms = 520 * wdd->timeout + MAX_HW_ERROR;
 
 	/* Generate NMI when wdt expires */
 	writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL);
@@ -126,31 +128,33 @@ static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize)
 	 * be petted during the open window; not too early or not too late.
 	 * The HW configuration options only allow for the open window size
 	 * to be 50% or less than that.
+	 * To avoid any glitches, we accommodate 2% + max hardware error
+	 * safety margin.
 	 */
 	switch (wsize) {
 	case RTIWWDSIZE_50P:
-		/* 50% open window => 50% min heartbeat */
-		wdd->min_hw_heartbeat_ms = 500 * heartbeat;
+		/* 50% open window => 52% min heartbeat */
+		wdd->min_hw_heartbeat_ms = 520 * heartbeat + MAX_HW_ERROR;
 		break;
 
 	case RTIWWDSIZE_25P:
-		/* 25% open window => 75% min heartbeat */
-		wdd->min_hw_heartbeat_ms = 750 * heartbeat;
+		/* 25% open window => 77% min heartbeat */
+		wdd->min_hw_heartbeat_ms = 770 * heartbeat + MAX_HW_ERROR;
 		break;
 
 	case RTIWWDSIZE_12P5:
-		/* 12.5% open window => 87.5% min heartbeat */
-		wdd->min_hw_heartbeat_ms = 875 * heartbeat;
+		/* 12.5% open window => 89.5% min heartbeat */
+		wdd->min_hw_heartbeat_ms = 895 * heartbeat + MAX_HW_ERROR;
 		break;
 
 	case RTIWWDSIZE_6P25:
-		/* 6.5% open window => 93.5% min heartbeat */
-		wdd->min_hw_heartbeat_ms = 935 * heartbeat;
+		/* 6.5% open window => 95.5% min heartbeat */
+		wdd->min_hw_heartbeat_ms = 955 * heartbeat + MAX_HW_ERROR;
 		break;
 
 	case RTIWWDSIZE_3P125:
-		/* 3.125% open window => 96.9% min heartbeat */
-		wdd->min_hw_heartbeat_ms = 969 * heartbeat;
+		/* 3.125% open window => 98.9% min heartbeat */
+		wdd->min_hw_heartbeat_ms = 989 * heartbeat + MAX_HW_ERROR;
 		break;
 
 	default:
@@ -228,14 +232,6 @@ static int rti_wdt_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	/*
-	 * If watchdog is running at 32k clock, it is not accurate.
-	 * Adjust frequency down in this case so that we don't pet
-	 * the watchdog too often.
-	 */
-	if (wdt->freq < 32768)
-		wdt->freq = wdt->freq * 9 / 10;
-
 	pm_runtime_enable(dev);
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {

base-commit: 860bbe8e618fd62446309e286ab4a83d38201c0a
-- 
2.43.2


             reply	other threads:[~2024-04-17 20:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-17 20:57 Judith Mendez [this message]
2024-04-17 21:10 ` [PATCH v3] watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin Guenter Roeck
2024-05-08 18:50 ` Judith Mendez
2024-05-08 20:32   ` Saulnier, Nick

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240417205700.3947408-1-jm@ti.com \
    --to=jm@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=nsaulnier@ti.com \
    --cc=rafael.beims@toradex.com \
    --cc=vigneshr@ti.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.