Re: linux-next: manual merge of the usb tree with the usb.current tree

[Thinh Nguyen <Thinh.Nguyen@synopsys.com>]

Hi Stephen,

On Fri, Apr 26, 2024, Stephen Rothwell wrote:
> Hi all,
> 
> Today's linux-next merge of the usb tree got a conflict in:
> 
>   drivers/usb/dwc3/core.c
> 
> between commit:
> 
>   6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
> 
> from the usb.current tree and commit:
> 
>   30a46746ca5a ("usb: dwc3: core: Refactor PHY logic to support Multiport Controller")
> 
> from the usb tree.
> 
> I fixed it up (I think - see below) and can carry the fix as
> necessary. This is now fixed as far as linux-next is concerned, but any
> non trivial conflicts should be mentioned to your upstream maintainer
> when your tree is submitted for merging.  You may also want to consider
> cooperating with the maintainer of the conflicting tree to minimise any
> particularly complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc drivers/usb/dwc3/core.c
> index 100041320e8d,4dc6fc79c6d9..000000000000
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@@ -104,27 -105,6 +105,30 @@@ static int dwc3_get_dr_mode(struct dwc
>   	return 0;
>   }
>   
>  +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable)
>  +{
>  +	u32 reg;
> ++	int i;
>  +
> - 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> - 	if (enable && !dwc->dis_u3_susphy_quirk)
> - 		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> - 	else
> - 		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
> ++	for (i = 0; i < dwc->num_usb3_ports; i++) {
> ++		reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
> ++		if (enable && !dwc->dis_u3_susphy_quirk)
> ++			reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> ++		else
> ++			reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
> ++		dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
> ++	}
>  +
> - 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> - 
> - 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> - 	if (enable && !dwc->dis_u2_susphy_quirk)
> - 		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> - 	else
> - 		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
> - 
> - 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> ++	for (i = 0; i < dwc->num_usb2_ports; i++) {
> ++		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> ++		if (enable && !dwc->dis_u2_susphy_quirk)
> ++			reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> ++		else
> ++			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
> ++		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> ++	}
>  +}
>  +
>   void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
>   {
>   	u32 reg;
> @@@ -596,19 -594,14 +618,11 @@@ static int dwc3_core_ulpi_init(struct d
>   	return ret;
>   }
>   
> - /**
> -  * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
> -  * @dwc: Pointer to our controller context structure
> -  *
> -  * Returns 0 on success. The USB PHY interfaces are configured but not
> -  * initialized. The PHY interfaces and the PHYs get initialized together with
> -  * the core in dwc3_core_init.
> -  */
> - static int dwc3_phy_setup(struct dwc3 *dwc)
> + static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
>   {
>  -	unsigned int hw_mode;
>   	u32 reg;
>   
> - 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
>  -	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>  -
> + 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
>   
>   	/*
>   	 * Make sure UX_EXIT_PX is cleared as that causes issues with some


Thanks for reporting. There's a slight adjustment to remove hw_mode that
was missed for dwc3_hs_phy_setup(). It should look more like this:

diff --cc drivers/usb/dwc3/core.c
index edb0a6aa1f9f,4dc6fc79c6d9..000000000000
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@@ -105,27 -105,6 +105,32 @@@ static int dwc3_get_dr_mode(struct dwc
  	return 0;
  }
  
 +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable)
 +{
 +	u32 reg;
++	int i;
 +
- 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- 	if (enable && !dwc->dis_u3_susphy_quirk)
- 		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
- 	else
- 		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
++	for (i = 0; i < dwc->num_usb3_ports; i++) {
++		reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
++		if (enable && !dwc->dis_u3_susphy_quirk)
++			reg |= DWC3_GUSB3PIPECTL_SUSPHY;
++		else
++			reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
 +
- 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
++		dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
++	}
 +
- 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- 	if (enable && !dwc->dis_u2_susphy_quirk)
- 		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
- 	else
- 		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
++	for (i = 0; i < dwc->num_usb2_ports; i++) {
++		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
++		if (enable && !dwc->dis_u2_susphy_quirk)
++			reg |= DWC3_GUSB2PHYCFG_SUSPHY;
++		else
++			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 +
- 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
++		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
++	}
 +}
 +
  void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
  {
  	u32 reg;
@@@ -610,19 -594,14 +620,11 @@@ static int dwc3_core_ulpi_init(struct d
  	return ret;
  }
  
- /**
-  * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
-  * @dwc: Pointer to our controller context structure
-  *
-  * Returns 0 on success. The USB PHY interfaces are configured but not
-  * initialized. The PHY interfaces and the PHYs get initialized together with
-  * the core in dwc3_core_init.
-  */
- static int dwc3_phy_setup(struct dwc3 *dwc)
+ static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
  {
 -	unsigned int hw_mode;
  	u32 reg;
  
- 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 -	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
 -
+ 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
  
  	/*
  	 * Make sure UX_EXIT_PX is cleared as that causes issues with some
@@@ -669,9 -653,22 +671,16 @@@
  	if (dwc->dis_del_phy_power_chg_quirk)
  		reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
  
- 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
  
- 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ 	return 0;
+ }
+ 
+ static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
+ {
 -	unsigned int hw_mode;
+ 	u32 reg;
+ 
 -	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
 -
+ 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));
  
  	/* Select the HS PHY interface */
  	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {


--
Thanks,
Thinh