All of lore.kernel.org
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Johan Hovold <johan+linaro@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	Bjorn Andersson <quic_bjorande@quicinc.com>,
	 Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH 11/12] arm64: dts: qcom: sm8550: Throttle the GPU when overheating
Date: Fri, 10 May 2024 14:58:40 +0200	[thread overview]
Message-ID: <20240510-topic-gpus_are_cool_now-v1-11-ababc269a438@linaro.org> (raw)
In-Reply-To: <20240510-topic-gpus_are_cool_now-v1-0-ababc269a438@linaro.org>

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.

Remove the copypasta-from-downstream userspace governor entries while
at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 208 ++++++++++++++---------------------
 1 file changed, 80 insertions(+), 128 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 51c547872438..23f769a5b1d4 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -5367,34 +5367,28 @@ gpuss-0-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu0_junction_config>;
+					trip = <&gpu0_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu0_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu0_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5406,34 +5400,28 @@ gpuss-1-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu1_junction_config>;
+					trip = <&gpu1_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu1_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu1_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5445,34 +5433,28 @@ gpuss-2-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu2_junction_config>;
+					trip = <&gpu2_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu2_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu2_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5484,34 +5466,28 @@ gpuss-3-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu3_junction_config>;
+					trip = <&gpu3_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu3_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu3_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5523,34 +5499,28 @@ gpuss-4-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu4_junction_config>;
+					trip = <&gpu4_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu4_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu4_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5562,34 +5532,28 @@ gpuss-5-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu5_junction_config>;
+					trip = <&gpu5_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu5_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu5_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5601,34 +5565,28 @@ gpuss-6-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu6_junction_config>;
+					trip = <&gpu6_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu6_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu6_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5640,34 +5598,28 @@ gpuss-7-thermal {
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu7_junction_config>;
+					trip = <&gpu7_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu7_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu7_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};

-- 
2.40.1


  parent reply	other threads:[~2024-05-10 12:58 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-10 12:58 [PATCH 00/12] Adreno cooling, take 2 Konrad Dybcio
2024-05-10 12:58 ` [PATCH 01/12] arm64: dts: qcom: sc8180x: Throttle the GPU when overheating Konrad Dybcio
2024-05-10 12:58 ` [PATCH 02/12] arm64: dts: qcom: sc8280xp: " Konrad Dybcio
2024-05-10 12:58 ` [PATCH 03/12] arm64: dts: qcom: sdm630: " Konrad Dybcio
2024-05-10 12:58 ` [PATCH 04/12] arm64: dts: qcom: sdm845: " Konrad Dybcio
2024-05-10 12:58 ` [PATCH 05/12] arm64: dts: qcom: sm6115: Update GPU thermal zone settings Konrad Dybcio
2024-05-10 12:58 ` [PATCH 06/12] arm64: dts: qcom: sm6350: " Konrad Dybcio
2024-05-10 12:58 ` [PATCH 07/12] arm64: dts: qcom: sm8150: Throttle the GPU when overheating Konrad Dybcio
2024-05-10 12:58 ` [PATCH 08/12] arm64: dts: qcom: sm8250: " Konrad Dybcio
2024-05-10 12:58 ` [PATCH 09/12] arm64: dts: qcom: sm8350: " Konrad Dybcio
2024-05-10 12:58 ` [PATCH 10/12] arm64: dts: qcom: sm8450: " Konrad Dybcio
2024-05-10 12:58 ` Konrad Dybcio [this message]
2024-05-10 12:58 ` [PATCH 12/12] arm64: dts: qcom: sm8650: " Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240510-topic-gpus_are_cool_now-v1-11-ababc269a438@linaro.org \
    --to=konrad.dybcio@linaro.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_bjorande@quicinc.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.