All of lore.kernel.org
 help / color / mirror / Atom feed
From: Naohiro Aota <naohiro.aota@wdc.com>
To: linux-btrfs@vger.kernel.org
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Subject: [PATCH 1/7] btrfs-progs: rename block_count to byte_count
Date: Mon, 13 May 2024 18:51:27 -0600	[thread overview]
Message-ID: <20240514005133.44786-2-naohiro.aota@wdc.com> (raw)
In-Reply-To: <20240514005133.44786-1-naohiro.aota@wdc.com>

block_count and dev_block_count are counting the size in bytes. And,
comparing them with e.g, "min_dev_size" is confusing. Rename them to
represent the unit better.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
---
 common/device-utils.c | 28 +++++++++++-----------
 mkfs/main.c           | 56 +++++++++++++++++++++----------------------
 2 files changed, 42 insertions(+), 42 deletions(-)

diff --git a/common/device-utils.c b/common/device-utils.c
index d086e9ea2564..86942e0c7041 100644
--- a/common/device-utils.c
+++ b/common/device-utils.c
@@ -222,11 +222,11 @@ out:
  * - reset zones
  * - delete end of the device
  */
-int btrfs_prepare_device(int fd, const char *file, u64 *block_count_ret,
-		u64 max_block_count, unsigned opflags)
+int btrfs_prepare_device(int fd, const char *file, u64 *byte_count_ret,
+		u64 max_byte_count, unsigned opflags)
 {
 	struct btrfs_zoned_device_info *zinfo = NULL;
-	u64 block_count;
+	u64 byte_count;
 	struct stat st;
 	int i, ret;
 
@@ -236,13 +236,13 @@ int btrfs_prepare_device(int fd, const char *file, u64 *block_count_ret,
 		return 1;
 	}
 
-	block_count = device_get_partition_size_fd_stat(fd, &st);
-	if (block_count == 0) {
+	byte_count = device_get_partition_size_fd_stat(fd, &st);
+	if (byte_count == 0) {
 		error("unable to determine size of %s", file);
 		return 1;
 	}
-	if (max_block_count)
-		block_count = min(block_count, max_block_count);
+	if (max_byte_count)
+		byte_count = min(byte_count, max_byte_count);
 
 	if (opflags & PREP_DEVICE_ZONED) {
 		ret = btrfs_get_zone_info(fd, file, &zinfo);
@@ -276,18 +276,18 @@ int btrfs_prepare_device(int fd, const char *file, u64 *block_count_ret,
 		if (discard_supported(file)) {
 			if (opflags & PREP_DEVICE_VERBOSE)
 				printf("Performing full device TRIM %s (%s) ...\n",
-						file, pretty_size(block_count));
-			device_discard_blocks(fd, 0, block_count);
+						file, pretty_size(byte_count));
+			device_discard_blocks(fd, 0, byte_count);
 		}
 	}
 
-	ret = zero_dev_clamped(fd, zinfo, 0, ZERO_DEV_BYTES, block_count);
+	ret = zero_dev_clamped(fd, zinfo, 0, ZERO_DEV_BYTES, byte_count);
 	for (i = 0 ; !ret && i < BTRFS_SUPER_MIRROR_MAX; i++)
 		ret = zero_dev_clamped(fd, zinfo, btrfs_sb_offset(i),
-				       BTRFS_SUPER_INFO_SIZE, block_count);
+				       BTRFS_SUPER_INFO_SIZE, byte_count);
 	if (!ret && (opflags & PREP_DEVICE_ZERO_END))
-		ret = zero_dev_clamped(fd, zinfo, block_count - ZERO_DEV_BYTES,
-				       ZERO_DEV_BYTES, block_count);
+		ret = zero_dev_clamped(fd, zinfo, byte_count - ZERO_DEV_BYTES,
+				       ZERO_DEV_BYTES, byte_count);
 
 	if (ret < 0) {
 		errno = -ret;
@@ -302,7 +302,7 @@ int btrfs_prepare_device(int fd, const char *file, u64 *block_count_ret,
 	}
 
 	free(zinfo);
-	*block_count_ret = block_count;
+	*byte_count_ret = byte_count;
 	return 0;
 
 err:
diff --git a/mkfs/main.c b/mkfs/main.c
index a467795d4428..950f76101058 100644
--- a/mkfs/main.c
+++ b/mkfs/main.c
@@ -80,8 +80,8 @@ static int opt_oflags = O_RDWR;
 struct prepare_device_progress {
 	int fd;
 	char *file;
-	u64 dev_block_count;
-	u64 block_count;
+	u64 dev_byte_count;
+	u64 byte_count;
 	int ret;
 };
 
@@ -1159,8 +1159,8 @@ static void *prepare_one_device(void *ctx)
 	}
 	prepare_ctx->ret = btrfs_prepare_device(prepare_ctx->fd,
 				prepare_ctx->file,
-				&prepare_ctx->dev_block_count,
-				prepare_ctx->block_count,
+				&prepare_ctx->dev_byte_count,
+				prepare_ctx->byte_count,
 				(bconf.verbose ? PREP_DEVICE_VERBOSE : 0) |
 				(opt_zero_end ? PREP_DEVICE_ZERO_END : 0) |
 				(opt_discard ? PREP_DEVICE_DISCARD : 0) |
@@ -1204,8 +1204,8 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 	bool metadata_profile_set = false;
 	u64 data_profile = 0;
 	bool data_profile_set = false;
-	u64 block_count = 0;
-	u64 dev_block_count = 0;
+	u64 byte_count = 0;
+	u64 dev_byte_count = 0;
 	bool mixed = false;
 	char *label = NULL;
 	int nr_global_roots = sysconf(_SC_NPROCESSORS_ONLN);
@@ -1347,7 +1347,7 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 				sectorsize = arg_strtou64_with_suffix(optarg);
 				break;
 			case 'b':
-				block_count = arg_strtou64_with_suffix(optarg);
+				byte_count = arg_strtou64_with_suffix(optarg);
 				opt_zero_end = false;
 				break;
 			case 'v':
@@ -1623,34 +1623,34 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 		 * Block_count not specified, use file/device size first.
 		 * Or we will always use source_dir_size calculated for mkfs.
 		 */
-		if (!block_count)
-			block_count = device_get_partition_size_fd_stat(fd, &statbuf);
+		if (!byte_count)
+			byte_count = device_get_partition_size_fd_stat(fd, &statbuf);
 		source_dir_size = btrfs_mkfs_size_dir(source_dir, sectorsize,
 				min_dev_size, metadata_profile, data_profile);
-		if (block_count < source_dir_size) {
+		if (byte_count < source_dir_size) {
 			if (S_ISREG(statbuf.st_mode)) {
-				block_count = source_dir_size;
+				byte_count = source_dir_size;
 			} else {
 				warning(
 "the target device %llu (%s) is smaller than the calculated source directory size %llu (%s), mkfs may fail",
-					block_count, pretty_size(block_count),
+					byte_count, pretty_size(byte_count),
 					source_dir_size, pretty_size(source_dir_size));
 			}
 		}
-		ret = zero_output_file(fd, block_count);
+		ret = zero_output_file(fd, byte_count);
 		if (ret) {
 			error("unable to zero the output file");
 			close(fd);
 			goto error;
 		}
 		/* our "device" is the new image file */
-		dev_block_count = block_count;
+		dev_byte_count = byte_count;
 		close(fd);
 	}
-	/* Check device/block_count after the nodesize is determined */
-	if (block_count && block_count < min_dev_size) {
+	/* Check device/byte_count after the nodesize is determined */
+	if (byte_count && byte_count < min_dev_size) {
 		error("size %llu is too small to make a usable filesystem",
-			block_count);
+			byte_count);
 		error("minimum size for btrfs filesystem is %llu",
 			min_dev_size);
 		goto error;
@@ -1661,9 +1661,9 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 	 * 1 zone for a metadata block group
 	 * 1 zone for a data block group
 	 */
-	if (opt_zoned && block_count && block_count < 5 * zone_size(file)) {
+	if (opt_zoned && byte_count && byte_count < 5 * zone_size(file)) {
 		error("size %llu is too small to make a usable filesystem",
-			block_count);
+			byte_count);
 		error("minimum size for a zoned btrfs filesystem is %llu",
 			min_dev_size);
 		goto error;
@@ -1741,8 +1741,8 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 	/* Start threads */
 	for (i = 0; i < device_count; i++) {
 		prepare_ctx[i].file = argv[optind + i - 1];
-		prepare_ctx[i].block_count = block_count;
-		prepare_ctx[i].dev_block_count = block_count;
+		prepare_ctx[i].byte_count = byte_count;
+		prepare_ctx[i].dev_byte_count = byte_count;
 		ret = pthread_create(&t_prepare[i], NULL, prepare_one_device,
 				     &prepare_ctx[i]);
 		if (ret) {
@@ -1763,16 +1763,16 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 		goto error;
 	}
 
-	dev_block_count = prepare_ctx[0].dev_block_count;
-	if (block_count && block_count > dev_block_count) {
+	dev_byte_count = prepare_ctx[0].dev_byte_count;
+	if (byte_count && byte_count > dev_byte_count) {
 		error("%s is smaller than requested size, expected %llu, found %llu",
-		      file, block_count, dev_block_count);
+		      file, byte_count, dev_byte_count);
 		goto error;
 	}
 
 	/* To create the first block group and chunk 0 in make_btrfs */
 	system_group_size = (opt_zoned ? zone_size(file) : BTRFS_MKFS_SYSTEM_GROUP_SIZE);
-	if (dev_block_count < system_group_size) {
+	if (dev_byte_count < system_group_size) {
 		error("device is too small to make filesystem, must be at least %llu",
 				system_group_size);
 		goto error;
@@ -1794,7 +1794,7 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 	mkfs_cfg.label = label;
 	memcpy(mkfs_cfg.fs_uuid, fs_uuid, sizeof(mkfs_cfg.fs_uuid));
 	memcpy(mkfs_cfg.dev_uuid, dev_uuid, sizeof(mkfs_cfg.dev_uuid));
-	mkfs_cfg.num_bytes = dev_block_count;
+	mkfs_cfg.num_bytes = dev_byte_count;
 	mkfs_cfg.nodesize = nodesize;
 	mkfs_cfg.sectorsize = sectorsize;
 	mkfs_cfg.stripesize = stripesize;
@@ -1889,7 +1889,7 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 				file);
 			continue;
 		}
-		dev_block_count = prepare_ctx[i].dev_block_count;
+		dev_byte_count = prepare_ctx[i].dev_byte_count;
 
 		if (prepare_ctx[i].ret) {
 			errno = -prepare_ctx[i].ret;
@@ -1898,7 +1898,7 @@ int BOX_MAIN(mkfs)(int argc, char **argv)
 		}
 
 		ret = btrfs_add_to_fsid(trans, root, prepare_ctx[i].fd,
-					prepare_ctx[i].file, dev_block_count,
+					prepare_ctx[i].file, dev_byte_count,
 					sectorsize, sectorsize, sectorsize);
 		if (ret) {
 			error("unable to add %s to filesystem: %d",
-- 
2.45.0


  reply	other threads:[~2024-05-14  0:52 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-14  0:51 [PATCH 0/7] btrfs-progs: zoned: proper "mkfs.btrfs -b" support Naohiro Aota
2024-05-14  0:51 ` Naohiro Aota [this message]
2024-05-14  0:51 ` [PATCH 2/7] btrfs-progs: mkfs: remove duplicated device size check Naohiro Aota
2024-05-14  0:51 ` [PATCH 3/7] btrfs-progs: mkfs: unify zoned mode minimum size calc into btrfs_min_dev_size() Naohiro Aota
2024-05-14  0:51 ` [PATCH 4/7] btrfs-progs: mkfs: fix minimum size calculation for zoned Naohiro Aota
2024-05-14  0:51 ` [PATCH 5/7] btrfs-progs: mkfs: check if byte_count is zone size aligned Naohiro Aota
2024-05-14  0:51 ` [PATCH 6/7] btrfs-progs: support byte length for zone resetting Naohiro Aota
2024-05-14  0:51 ` [PATCH 7/7] btrfs-progs: add test " Naohiro Aota
2024-05-14 15:39 ` [PATCH 0/7] btrfs-progs: zoned: proper "mkfs.btrfs -b" support David Sterba
2024-05-14 17:14   ` Naohiro Aota
2024-05-14 17:21     ` David Sterba

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240514005133.44786-2-naohiro.aota@wdc.com \
    --to=naohiro.aota@wdc.com \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.