All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: "Pali Rohár" <pali@kernel.org>, "Peng Fan" <peng.fan@nxp.com>,
	"Priyanka Jain" <priyanka.jain@nxp.com>,
	"Sinan Akman" <sinan@writeme.com>
Cc: u-boot@lists.denx.de
Subject: Re: [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error
Date: Tue, 14 Jun 2022 11:25:18 +0900	[thread overview]
Message-ID: <211e835d-ca7d-5e13-e041-68bb785be11e@samsung.com> (raw)
In-Reply-To: <20220612091241.iaewmyf3srf52wcx@pali>

Hi,

On 6/12/22 18:12, Pali Rohár wrote:
> PING?

Sorry for too late. 

> 
> On Friday 29 April 2022 20:27:34 Pali Rohár wrote:
>> Only newer eSDHC controllers set PRSSTAT_SDSTB flag. So do not wait until
>> flag PRSSTAT_SDSTB is set on old pre-2.2 controllers. Instead sleep for
>> fixed amount of time like it was before commit 6f883e501b65 ("mmc:
>> fsl_esdhc: Add emmc hs200 support").
>>
>> This change fixes error 'Internal clock never stabilised.' which is printed
>> on P2020 board at every access to SD card.
>>
>> Fixes: 6f883e501b65 ("mmc: fsl_esdhc: Add emmc hs200 support")
>> Signed-off-by: Pali Rohár <pali@kernel.org>

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

>> ---
>>  drivers/mmc/fsl_esdhc.c | 17 +++++++++++++++++
>>  1 file changed, 17 insertions(+)
>>
>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>> index fdf2cc290e06..3b3587bd8d72 100644
>> --- a/drivers/mmc/fsl_esdhc.c
>> +++ b/drivers/mmc/fsl_esdhc.c
>> @@ -503,6 +503,7 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
>>  	u32 time_out;
>>  	u32 value;
>>  	uint clk;
>> +	u32 hostver;
>>  
>>  	if (clock < mmc->cfg->f_min)
>>  		clock = mmc->cfg->f_min;
>> @@ -543,6 +544,14 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
>>  
>>  	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
>>  
>> +	/* Only newer eSDHC controllers set PRSSTAT_SDSTB flag */
>> +	hostver = esdhc_read32(&priv->esdhc_regs->hostver);
>> +	if (HOSTVER_VENDOR(hostver) <= VENDOR_V_22) {
>> +		udelay(10000);
>> +		esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
>> +		return;
>> +	}
>> +
>>  	time_out = 20;
>>  	value = PRSSTAT_SDSTB;
>>  	while (!(esdhc_read32(&regs->prsstat) & value)) {
>> @@ -562,6 +571,7 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
>>  	struct fsl_esdhc *regs = priv->esdhc_regs;
>>  	u32 value;
>>  	u32 time_out;
>> +	u32 hostver;
>>  
>>  	value = esdhc_read32(&regs->sysctl);
>>  
>> @@ -572,6 +582,13 @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
>>  
>>  	esdhc_write32(&regs->sysctl, value);
>>  
>> +	/* Only newer eSDHC controllers set PRSSTAT_SDSTB flag */
>> +	hostver = esdhc_read32(&priv->esdhc_regs->hostver);
>> +	if (HOSTVER_VENDOR(hostver) <= VENDOR_V_22) {
>> +		udelay(10000);
>> +		return;
>> +	}
>> +
>>  	time_out = 20;
>>  	value = PRSSTAT_SDSTB;
>>  	while (!(esdhc_read32(&regs->prsstat) & value)) {
>> -- 
>> 2.20.1
>>
> 


  reply	other threads:[~2022-06-14  2:25 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20220429182750epcas1p178c23eafab50ed4382fee7471e54bf43@epcas1p1.samsung.com>
2022-04-29 18:27 ` [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error Pali Rohár
2022-05-06  9:32   ` Jaehoon Chung
2022-05-06  9:40     ` Pali Rohár
2022-05-09  5:36   ` Peng Fan (OSS)
2022-05-09  6:21     ` Bough Chen
2022-06-12  9:12   ` Pali Rohár
2022-06-14  2:25     ` Jaehoon Chung [this message]
2022-06-23 16:11       ` Pali Rohár
2022-07-10 10:32         ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=211e835d-ca7d-5e13-e041-68bb785be11e@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=pali@kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=priyanka.jain@nxp.com \
    --cc=sinan@writeme.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.