From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759253AbcDAPRc (ORCPT ); Fri, 1 Apr 2016 11:17:32 -0400 Received: from gloria.sntech.de ([95.129.55.99]:57649 "EHLO gloria.sntech.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759221AbcDAPRa (ORCPT ); Fri, 1 Apr 2016 11:17:30 -0400 From: Heiko Stuebner To: Vivek Gautam Cc: vireshk@kernel.org, shiraz.linux.kernel@gmail.com, kishon@ti.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, spear-devel@list.st.com, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-usb@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-omap@vger.kernel.org, cpgs@samsung.com Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers Date: Fri, 01 Apr 2016 17:16:59 +0200 Message-ID: <2184537.UxPmHQG1V3@phil> User-Agent: KMail/4.14.10 (Linux/4.3.0-1-amd64; KDE/4.14.14; x86_64; ; ) In-Reply-To: <1459510156-9147-1-git-send-email-gautam.vivek@samsung.com> References: <1459510156-9147-1-git-send-email-gautam.vivek@samsung.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Am Freitag, 1. April 2016, 16:59:15 schrieb Vivek Gautam: > Adding vendor specific directories in phy to group > phy drivers under their respective vendor umbrella. > > Signed-off-by: Vivek Gautam I don't have a preference about the phy-locations either way, so for Rockchip phys Acked-by: Heiko Stuebner > --- > > With growing number of phy drivers, it makes sense to > group these drivers under their respective vendor/platform > umbrella directory. > > Build-tested 'multi_v7_defconfig'. > > drivers/phy/Kconfig | 386 > +--------------------- drivers/phy/Makefile > | 57 +--- > drivers/phy/bcom/Kconfig | 27 ++ > drivers/phy/bcom/Makefile | 3 + > drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 > drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 > drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 > drivers/phy/hisi/Kconfig | 20 ++ > drivers/phy/hisi/Makefile | 2 + > drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 > drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 > drivers/phy/marvell/Kconfig | 50 +++ > drivers/phy/marvell/Makefile | 6 + > drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 > drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 > drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 > drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 > drivers/phy/qcom/Kconfig | 23 ++ > drivers/phy/qcom/Makefile | 5 + > drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 > drivers/phy/rcar/Kconfig | 16 + > drivers/phy/rcar/Makefile | 2 + > drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 > drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 > drivers/phy/rockchip/Kconfig | 23 ++ > drivers/phy/rockchip/Makefile | 3 + > drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 > drivers/phy/samsung/Kconfig | 87 +++++ > drivers/phy/samsung/Makefile | 10 + > drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 > drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 > drivers/phy/st/Kconfig | 51 +++ > drivers/phy/st/Makefile | 6 + > drivers/phy/{ => st}/phy-miphy28lp.c | 0 > drivers/phy/{ => st}/phy-miphy365x.c | 0 > drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 > drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 > drivers/phy/{ => st}/phy-stih407-usb.c | 0 > drivers/phy/{ => st}/phy-stih41x-usb.c | 0 > drivers/phy/sunxi/Kconfig | 28 ++ > drivers/phy/sunxi/Makefile | 2 + > drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 > drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 > drivers/phy/ti/Kconfig | 67 ++++ > drivers/phy/ti/Makefile | 6 + > drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 > drivers/phy/{ => ti}/phy-omap-control.c | 0 > drivers/phy/{ => ti}/phy-omap-usb2.c | 0 > drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 > drivers/phy/{ => ti}/phy-tusb1210.c | 0 > drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 > drivers/phy/{ => ti}/ulpi_phy.h | 0 > 71 files changed, 464 insertions(+), 416 deletions(-) > create mode 100644 drivers/phy/bcom/Kconfig > create mode 100644 drivers/phy/bcom/Makefile > rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) > rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) > rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) > create mode 100644 drivers/phy/hisi/Kconfig > create mode 100644 drivers/phy/hisi/Makefile > rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) > rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) > create mode 100644 drivers/phy/marvell/Kconfig > create mode 100644 drivers/phy/marvell/Makefile > rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) > rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) > create mode 100644 drivers/phy/qcom/Kconfig > create mode 100644 drivers/phy/qcom/Makefile > rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) > create mode 100644 drivers/phy/rcar/Kconfig > create mode 100644 drivers/phy/rcar/Makefile > rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) > rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) > create mode 100644 drivers/phy/rockchip/Kconfig > create mode 100644 drivers/phy/rockchip/Makefile > rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) > create mode 100644 drivers/phy/samsung/Kconfig > create mode 100644 drivers/phy/samsung/Makefile > rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) > create mode 100644 drivers/phy/st/Kconfig > create mode 100644 drivers/phy/st/Makefile > rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) > rename drivers/phy/{ => st}/phy-miphy365x.c (100%) > rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) > rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) > rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) > rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) > create mode 100644 drivers/phy/sunxi/Kconfig > create mode 100644 drivers/phy/sunxi/Makefile > rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) > rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) > create mode 100644 drivers/phy/ti/Kconfig > create mode 100644 drivers/phy/ti/Makefile > rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) > rename drivers/phy/{ => ti}/phy-omap-control.c (100%) > rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) > rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) > rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) > rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) > rename drivers/phy/{ => ti}/ulpi_phy.h (100%) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 26566db..80c8c68 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -15,45 +15,6 @@ config GENERIC_PHY > phy users can obtain reference to the PHY. All the users of this > framework should select this config. > > -config PHY_BERLIN_USB > - tristate "Marvell Berlin USB PHY Driver" > - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the USB PHY on Marvell Berlin SoCs. > - > -config PHY_BERLIN_SATA > - tristate "Marvell Berlin SATA PHY driver" > - depends on ARCH_BERLIN && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the SATA PHY on Marvell Berlin SoCs. > - > -config ARMADA375_USBCLUSTER_PHY > - def_bool y > - depends on MACH_ARMADA_375 || COMPILE_TEST > - depends on OF && HAS_IOMEM > - select GENERIC_PHY > - > -config PHY_DM816X_USB > - tristate "TI dm816x USB PHY driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this for dm816x USB to work. > - > -config PHY_EXYNOS_MIPI_VIDEO > - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > - depends on HAS_IOMEM > - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > - select GENERIC_PHY > - default y if ARCH_S5PV210 || ARCH_EXYNOS > - help > - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > - and EXYNOS SoCs. > - > config PHY_LPC18XX_USB_OTG > tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" > depends on OF && (ARCH_LPC18XX || COMPILE_TEST) > @@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG > This driver is need for USB0 support on LPC18xx/43xx and takes > care of enabling and clock setup. > > -config PHY_PXA_28NM_HSIC > - tristate "Marvell USB HSIC 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB HSIC PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell ehci driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_PXA_28NM_USB2 > - tristate "Marvell USB 2.0 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB 2.0 PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell udc/ehci/otg driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_MVEBU_SATA > - def_bool y > - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > - depends on OF > - select GENERIC_PHY > - > -config PHY_MIPHY28LP > - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > - that is part of STMicroelectronics STiH407 SoC. > - > -config PHY_MIPHY365X > - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > - depends on ARCH_STI > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE) > - that is part of STMicroelectronics STiH41x SoC series. > - > -config PHY_RCAR_GEN2 > - tristate "Renesas R-Car generation 2 USB PHY driver" > - depends on ARCH_SHMOBILE > - depends on GENERIC_PHY > - help > - Support for USB PHY found on Renesas R-Car generation 2 SoCs. > - > -config PHY_RCAR_GEN3_USB2 > - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > - depends on OF && ARCH_SHMOBILE > - select GENERIC_PHY > - help > - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > - > -config OMAP_CONTROL_PHY > - tristate "OMAP CONTROL PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - help > - Enable this to add support for the PHY part present in the control > - module. This driver has API to power on the USB2 PHY and to write to > - the mailbox. The mailbox is present only in omap4 and the register to > - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > - additional register to power on USB3 PHY/SATA PHY/PCIE PHY > - (PIPE3 PHY). > - > -config OMAP_USB2 > - tristate "OMAP USB2 PHY Driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the transceiver that is part of SOC. This > - driver takes care of all the PHY functionality apart from comparator. > - The USB OTG controller communicates with the comparator using this > - driver. > - > -config TI_PIPE3 > - tristate "TI PIPE3 PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - select GENERIC_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the PIPE3 PHY that is part of TI SOCs. This > - driver takes care of all the PHY functionality apart from comparator. > - This driver interacts with the "OMAP Control PHY Driver" to power > - on/off the PHY. > - > -config TWL4030_USB > - tristate "TWL4030 USB Transceiver Driver" > - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this to support the USB OTG transceiver on TWL4030 > - family chips (including the TWL5030 and TPS659x0 devices). > - This transceiver supports high and full speed devices plus, > - in host mode, low speed. > - > -config PHY_EXYNOS_DP_VIDEO > - tristate "EXYNOS SoC series Display Port PHY driver" > - depends on OF > - depends on ARCH_EXYNOS || COMPILE_TEST > - default ARCH_EXYNOS > - select GENERIC_PHY > - help > - Support for Display Port PHY found on Samsung EXYNOS SoCs. > - > -config BCM_KONA_USB2_PHY > - tristate "Broadcom Kona USB2 PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support the Broadcom Kona USB 2.0 PHY. > - > -config PHY_EXYNOS5250_SATA > - tristate "Exynos5250 Sata SerDes/PHY driver" > - depends on SOC_EXYNOS5250 > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - select I2C > - select I2C_S3C2410 > - select MFD_SYSCON > - help > - Enable this to support SATA SerDes/Phy found on Samsung's > - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > - port to accept one SATA device. > - > -config PHY_HIX5HD2_SATA > - tristate "HIX5HD2 SATA PHY Driver" > - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Support for SATA PHY on Hisilicon hix5hd2 Soc. > - > config PHY_MT65XX_USB3 > tristate "Mediatek USB3.0 PHY Driver" > depends on ARCH_MEDIATEK && OF > @@ -222,93 +35,6 @@ config PHY_MT65XX_USB3 > for mt65xx SoCs. it supports two usb2.0 ports and > one usb3.0 port. > > -config PHY_HI6220_USB > - tristate "hi6220 USB PHY support" > - depends on (ARCH_HISI && ARM64) || COMPILE_TEST > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Enable this to support the HISILICON HI6220 USB PHY. > - > - To compile this driver as a module, choose M here. > - > -config PHY_SUN4I_USB > - tristate "Allwinner sunxi SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on EXTCON > - depends on POWER_SUPPLY > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sunxi SoCs. > - > - This driver controls the entire USB PHY block, both the USB OTG > - parts, as well as the 2 regular USB 2 host PHYs. > - > -config PHY_SUN9I_USB > - tristate "Allwinner sun9i SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on USB_COMMON > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sun9i SoCs. > - > - This driver controls each individual USB 2 host PHY. > - > -config PHY_SAMSUNG_USB2 > - tristate "Samsung USB 2.0 PHY driver" > - depends on HAS_IOMEM > - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > - select GENERIC_PHY > - select MFD_SYSCON > - default ARCH_EXYNOS > - help > - Enable this to support the Samsung USB 2.0 PHY driver for Samsung > - SoCs. This driver provides the interface for USB 2.0 PHY. Support > - for particular PHYs will be enabled based on the SoC type in addition > - to this driver. > - > -config PHY_S5PV210_USB2 > - bool "Support for S5PV210" > - depends on PHY_SAMSUNG_USB2 > - depends on ARCH_S5PV210 > - help > - Enable USB PHY support for S5PV210. This option requires that Samsung > - USB 2.0 PHY driver is enabled and means that support for this > - particular SoC is compiled in the driver. In case of S5PV210 two phys > - are available - device and host. > - > -config PHY_EXYNOS4210_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default CPU_EXYNOS4210 > - > -config PHY_EXYNOS4X12_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > - > -config PHY_EXYNOS5250_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS5250 || SOC_EXYNOS5420 > - > -config PHY_EXYNOS5_USBDRD > - tristate "Exynos5 SoC series USB DRD PHY driver" > - depends on ARCH_EXYNOS && OF > - depends on HAS_IOMEM > - depends on USB_DWC3_EXYNOS > - select GENERIC_PHY > - select MFD_SYSCON > - default y > - help > - Enable USB DRD PHY support for Exynos 5 SoC series. > - This driver provides PHY interface for USB 3.0 DRD controller > - present on Exynos5 SoC series. > - > config PHY_PISTACHIO_USB > tristate "IMG Pistachio USB2.0 PHY driver" > depends on MACH_PISTACHIO > @@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB > help > Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. > > -config PHY_QCOM_APQ8064_SATA > - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_QCOM_IPQ806X_SATA > - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_ROCKCHIP_USB > - tristate "Rockchip USB2 PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip USB 2.0 PHY. > - > -config PHY_ROCKCHIP_EMMC > - tristate "Rockchip EMMC PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip EMMC PHY. > - > -config PHY_ROCKCHIP_DP > - tristate "Rockchip Display Port PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip Display Port PHY. > - > -config PHY_ST_SPEAR1310_MIPHY > - tristate "ST SPEAR1310-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1310 || COMPILE_TEST > - help > - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > - > -config PHY_ST_SPEAR1340_MIPHY > - tristate "ST SPEAR1340-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1340 || COMPILE_TEST > - help > - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > - > config PHY_XGENE > tristate "APM X-Gene 15Gbps PHY support" > depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) > @@ -372,53 +49,20 @@ config PHY_XGENE > help > This option enables support for APM X-Gene SoC multi-purpose PHY. > > -config PHY_STIH407_USB > - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > - depends on RESET_CONTROLLER > - depends on ARCH_STI || COMPILE_TEST > - select GENERIC_PHY > - help > - Enable this support to enable the picoPHY device used by USB2 > - and USB3 controllers on STMicroelectronics STiH407 SoC families. > - > -config PHY_STIH41X_USB > - tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the USB transceiver that is part of > - STMicroelectronics STiH41x SoC series. > - > -config PHY_QCOM_UFS > - tristate "Qualcomm UFS PHY driver" > - depends on OF && ARCH_QCOM > - select GENERIC_PHY > - help > - Support for UFS PHY on QCOM chipsets. > - > -config PHY_TUSB1210 > - tristate "TI TUSB1210 ULPI PHY module" > - depends on USB_ULPI_BUS > - select GENERIC_PHY > - help > - Support for TI TUSB1210 USB ULPI PHY. > - > -config PHY_BRCMSTB_SATA > - tristate "Broadcom STB SATA PHY driver" > - depends on ARCH_BRCMSTB || BMIPS_GENERIC > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled. > - > -config PHY_CYGNUS_PCIE > - tristate "Broadcom Cygnus PCIe PHY driver" > - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > - select GENERIC_PHY > - default ARCH_BCM_CYGNUS > - help > - Enable this to support the Broadcom Cygnus PCIe PHY. > - If unsure, say N. > +menuconfig PHY_PLAT > + bool "Platform Phy drivers" > + > +if PHY_PLAT > +source "drivers/phy/bcom/Kconfig" > +source "drivers/phy/hisi/Kconfig" > +source "drivers/phy/marvell/Kconfig" > +source "drivers/phy/qcom/Kconfig" > +source "drivers/phy/rcar/Kconfig" > +source "drivers/phy/rockchip/Kconfig" > +source "drivers/phy/samsung/Kconfig" > +source "drivers/phy/st/Kconfig" > +source "drivers/phy/sunxi/Kconfig" > +source "drivers/phy/ti/Kconfig" > +endif > > endmenu > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 24596a9..73d563b 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -3,52 +3,19 @@ > # > > obj-$(CONFIG_GENERIC_PHY) += phy-core.o > -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o > -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o > -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > -phy-exynos-usb2-y += phy-samsung-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > obj-$(CONFIG_PHY_XGENE) += phy-xgene.o > -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o > -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o > -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > + > +# Phy drivers for different platforms. > +obj-$(CONFIG_PHY_PLAT) += bcom/ \ > + hisi/ \ > + marvell/ \ > + qcom/ \ > + rcar/ \ > + rockchip/ \ > + samsung/ \ > + st/ \ > + sunxi/ \ > + ti/ > diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig > new file mode 100644 > index 0000000..8243372 > --- /dev/null > +++ b/drivers/phy/bcom/Kconfig > @@ -0,0 +1,27 @@ > +# > +# PHY drivers for Broadcom platforms > +# > +config PHY_CYGNUS_PCIE > + tristate "Broadcom Cygnus PCIe PHY driver" > + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > + select GENERIC_PHY > + default ARCH_BCM_CYGNUS > + help > + Enable this to support the Broadcom Cygnus PCIe PHY. > + If unsure, say N. > + > +config BCM_KONA_USB2_PHY > + tristate "Broadcom Kona USB2 PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support the Broadcom Kona USB 2.0 PHY. > + > +config PHY_BRCMSTB_SATA > + tristate "Broadcom STB SATA PHY driver" > + depends on ARCH_BRCMSTB || BMIPS_GENERIC > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled. > diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile > new file mode 100644 > index 0000000..f30fa76 > --- /dev/null > +++ b/drivers/phy/bcom/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c > b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c similarity index 100% > rename from drivers/phy/phy-bcm-cygnus-pcie.c > rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c > diff --git a/drivers/phy/phy-bcm-kona-usb2.c > b/drivers/phy/bcom/phy-bcm-kona-usb2.c similarity index 100% > rename from drivers/phy/phy-bcm-kona-usb2.c > rename to drivers/phy/bcom/phy-bcm-kona-usb2.c > diff --git a/drivers/phy/phy-brcmstb-sata.c > b/drivers/phy/bcom/phy-brcmstb-sata.c similarity index 100% > rename from drivers/phy/phy-brcmstb-sata.c > rename to drivers/phy/bcom/phy-brcmstb-sata.c > diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig > new file mode 100644 > index 0000000..affa9ed > --- /dev/null > +++ b/drivers/phy/hisi/Kconfig > @@ -0,0 +1,20 @@ > +# > +# PHY drivers for HiSilicon platforms > +# > +config PHY_HIX5HD2_SATA > + tristate "HIX5HD2 SATA PHY Driver" > + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Support for SATA PHY on Hisilicon hix5hd2 Soc. > + > +config PHY_HI6220_USB > + tristate "hi6220 USB PHY support" > + depends on (ARCH_HISI && ARM64) || COMPILE_TEST > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Enable this to support the HISILICON HI6220 USB PHY. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile > new file mode 100644 > index 0000000..6059ed8 > --- /dev/null > +++ b/drivers/phy/hisi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > diff --git a/drivers/phy/phy-hi6220-usb.c > b/drivers/phy/hisi/phy-hi6220-usb.c similarity index 100% > rename from drivers/phy/phy-hi6220-usb.c > rename to drivers/phy/hisi/phy-hi6220-usb.c > diff --git a/drivers/phy/phy-hix5hd2-sata.c > b/drivers/phy/hisi/phy-hix5hd2-sata.c similarity index 100% > rename from drivers/phy/phy-hix5hd2-sata.c > rename to drivers/phy/hisi/phy-hix5hd2-sata.c > diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig > new file mode 100644 > index 0000000..6c1576c > --- /dev/null > +++ b/drivers/phy/marvell/Kconfig > @@ -0,0 +1,50 @@ > +# > +# PHY drivers for Marvell platforms > +# > +config ARMADA375_USBCLUSTER_PHY > + def_bool y > + depends on MACH_ARMADA_375 || COMPILE_TEST > + depends on OF && HAS_IOMEM > + select GENERIC_PHY > + > +config PHY_BERLIN_USB > + tristate "Marvell Berlin USB PHY Driver" > + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the USB PHY on Marvell Berlin SoCs. > + > +config PHY_BERLIN_SATA > + tristate "Marvell Berlin SATA PHY driver" > + depends on ARCH_BERLIN && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the SATA PHY on Marvell Berlin SoCs. > + > +config PHY_MVEBU_SATA > + def_bool y > + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > + depends on OF > + select GENERIC_PHY > + > +config PHY_PXA_28NM_HSIC > + tristate "Marvell USB HSIC 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB HSIC PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell ehci driver. > + > + To compile this driver as a module, choose M here. > + > +config PHY_PXA_28NM_USB2 > + tristate "Marvell USB 2.0 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB 2.0 PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell udc/ehci/otg driver. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile > new file mode 100644 > index 0000000..f4fa255 > --- /dev/null > +++ b/drivers/phy/marvell/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > diff --git a/drivers/phy/phy-armada375-usb2.c > b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100% > rename from drivers/phy/phy-armada375-usb2.c > rename to drivers/phy/marvell/phy-armada375-usb2.c > diff --git a/drivers/phy/phy-berlin-sata.c > b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100% > rename from drivers/phy/phy-berlin-sata.c > rename to drivers/phy/marvell/phy-berlin-sata.c > diff --git a/drivers/phy/phy-berlin-usb.c > b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100% > rename from drivers/phy/phy-berlin-usb.c > rename to drivers/phy/marvell/phy-berlin-usb.c > diff --git a/drivers/phy/phy-mvebu-sata.c > b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100% > rename from drivers/phy/phy-mvebu-sata.c > rename to drivers/phy/marvell/phy-mvebu-sata.c > diff --git a/drivers/phy/phy-pxa-28nm-hsic.c > b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-hsic.c > rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c > diff --git a/drivers/phy/phy-pxa-28nm-usb2.c > b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-usb2.c > rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c > diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig > new file mode 100644 > index 0000000..9718d01 > --- /dev/null > +++ b/drivers/phy/qcom/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Qualcomm platforms > +# > +config PHY_QCOM_APQ8064_SATA > + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_IPQ806X_SATA > + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_UFS > + tristate "Qualcomm UFS PHY driver" > + depends on OF && ARCH_QCOM > + select GENERIC_PHY > + help > + Support for UFS PHY on QCOM chipsets. > diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile > new file mode 100644 > index 0000000..2db3e77 > --- /dev/null > +++ b/drivers/phy/qcom/Makefile > @@ -0,0 +1,5 @@ > +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \ > + += phy-qcom-ufs-qmp-20nm.o \ > + += phy-qcom-ufs-qmp-14nm.o > diff --git a/drivers/phy/phy-qcom-apq8064-sata.c > b/drivers/phy/qcom/phy-qcom-apq8064-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-apq8064-sata.c > rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c > diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c > b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-ipq806x-sata.c > rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c > diff --git a/drivers/phy/phy-qcom-ufs-i.h > b/drivers/phy/qcom/phy-qcom-ufs-i.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-i.h > rename to drivers/phy/qcom/phy-qcom-ufs-i.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h > diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c > similarity index 100% > rename from drivers/phy/phy-qcom-ufs.c > rename to drivers/phy/qcom/phy-qcom-ufs.c > diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig > new file mode 100644 > index 0000000..169b5e2 > --- /dev/null > +++ b/drivers/phy/rcar/Kconfig > @@ -0,0 +1,16 @@ > +# > +# PHY drivers for Renesas's r-car platforms > +# > +config PHY_RCAR_GEN2 > + tristate "Renesas R-Car generation 2 USB PHY driver" > + depends on ARCH_SHMOBILE > + depends on GENERIC_PHY > + help > + Support for USB PHY found on Renesas R-Car generation 2 SoCs. > + > +config PHY_RCAR_GEN3_USB2 > + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > + depends on OF && ARCH_SHMOBILE > + select GENERIC_PHY > + help > + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile > new file mode 100644 > index 0000000..695241a > --- /dev/null > +++ b/drivers/phy/rcar/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > diff --git a/drivers/phy/phy-rcar-gen2.c > b/drivers/phy/rcar/phy-rcar-gen2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen2.c > rename to drivers/phy/rcar/phy-rcar-gen2.c > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c > b/drivers/phy/rcar/phy-rcar-gen3-usb2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen3-usb2.c > rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c > diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig > new file mode 100644 > index 0000000..c575d1e > --- /dev/null > +++ b/drivers/phy/rockchip/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Rockchip platforms > +# > +config PHY_ROCKCHIP_USB > + tristate "Rockchip USB2 PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip USB 2.0 PHY. > + > +config PHY_ROCKCHIP_EMMC > + tristate "Rockchip EMMC PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip EMMC PHY. > + > +config PHY_ROCKCHIP_DP > + tristate "Rockchip Display Port PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip Display Port PHY. > diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile > new file mode 100644 > index 0000000..c15acc1 > --- /dev/null > +++ b/drivers/phy/rockchip/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > diff --git a/drivers/phy/phy-rockchip-dp.c > b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100% > rename from drivers/phy/phy-rockchip-dp.c > rename to drivers/phy/rockchip/phy-rockchip-dp.c > diff --git a/drivers/phy/phy-rockchip-emmc.c > b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100% > rename from drivers/phy/phy-rockchip-emmc.c > rename to drivers/phy/rockchip/phy-rockchip-emmc.c > diff --git a/drivers/phy/phy-rockchip-usb.c > b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100% > rename from drivers/phy/phy-rockchip-usb.c > rename to drivers/phy/rockchip/phy-rockchip-usb.c > diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig > new file mode 100644 > index 0000000..80bdea7 > --- /dev/null > +++ b/drivers/phy/samsung/Kconfig > @@ -0,0 +1,87 @@ > +# > +# PHY drivers for Samsung platforms > +# > +config PHY_SAMSUNG_USB2 > + tristate "Samsung USB 2.0 PHY driver" > + depends on HAS_IOMEM > + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > + select GENERIC_PHY > + select MFD_SYSCON > + default ARCH_EXYNOS > + help > + Enable this to support the Samsung USB 2.0 PHY driver for Samsung > + SoCs. This driver provides the interface for USB 2.0 PHY. Support > + for particular PHYs will be enabled based on the SoC type in addition > + to this driver. > + > +config PHY_S5PV210_USB2 > + bool "Support for S5PV210" > + depends on PHY_SAMSUNG_USB2 > + depends on ARCH_S5PV210 > + help > + Enable USB PHY support for S5PV210. This option requires that Samsung > + USB 2.0 PHY driver is enabled and means that support for this > + particular SoC is compiled in the driver. In case of S5PV210 two phys > + are available - device and host. > + > +config PHY_EXYNOS4210_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default CPU_EXYNOS4210 > + > +config PHY_EXYNOS4X12_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > + > +config PHY_EXYNOS5250_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS5250 || SOC_EXYNOS5420 > + > +config PHY_EXYNOS5_USBDRD > + tristate "Exynos5 SoC series USB DRD PHY driver" > + depends on ARCH_EXYNOS && OF > + depends on HAS_IOMEM > + depends on USB_DWC3_EXYNOS > + select GENERIC_PHY > + select MFD_SYSCON > + default y > + help > + Enable USB DRD PHY support for Exynos 5 SoC series. > + This driver provides PHY interface for USB 3.0 DRD controller > + present on Exynos5 SoC series. > + > +config PHY_EXYNOS_DP_VIDEO > + tristate "EXYNOS SoC series Display Port PHY driver" > + depends on OF > + depends on ARCH_EXYNOS || COMPILE_TEST > + default ARCH_EXYNOS > + select GENERIC_PHY > + help > + Support for Display Port PHY found on Samsung EXYNOS SoCs. > + > +config PHY_EXYNOS_MIPI_VIDEO > + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > + depends on HAS_IOMEM > + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > + select GENERIC_PHY > + default y if ARCH_S5PV210 || ARCH_EXYNOS > + help > + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > + and EXYNOS SoCs. > + > +config PHY_EXYNOS5250_SATA > + tristate "Exynos5250 Sata SerDes/PHY driver" > + depends on SOC_EXYNOS5250 > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + select I2C > + select I2C_S3C2410 > + select MFD_SYSCON > + help > + Enable this to support SATA SerDes/Phy found on Samsung's > + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > + port to accept one SATA device. > diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile > new file mode 100644 > index 0000000..585dbd7 > --- /dev/null > +++ b/drivers/phy/samsung/Makefile > @@ -0,0 +1,10 @@ > +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > +phy-exynos-usb2-y += phy-samsung-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > diff --git a/drivers/phy/phy-exynos-dp-video.c > b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100% > rename from drivers/phy/phy-exynos-dp-video.c > rename to drivers/phy/samsung/phy-exynos-dp-video.c > diff --git a/drivers/phy/phy-exynos-mipi-video.c > b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100% > rename from drivers/phy/phy-exynos-mipi-video.c > rename to drivers/phy/samsung/phy-exynos-mipi-video.c > diff --git a/drivers/phy/phy-exynos4210-usb2.c > b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4210-usb2.c > rename to drivers/phy/samsung/phy-exynos4210-usb2.c > diff --git a/drivers/phy/phy-exynos4x12-usb2.c > b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4x12-usb2.c > rename to drivers/phy/samsung/phy-exynos4x12-usb2.c > diff --git a/drivers/phy/phy-exynos5-usbdrd.c > b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100% > rename from drivers/phy/phy-exynos5-usbdrd.c > rename to drivers/phy/samsung/phy-exynos5-usbdrd.c > diff --git a/drivers/phy/phy-exynos5250-sata.c > b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100% > rename from drivers/phy/phy-exynos5250-sata.c > rename to drivers/phy/samsung/phy-exynos5250-sata.c > diff --git a/drivers/phy/phy-exynos5250-usb2.c > b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos5250-usb2.c > rename to drivers/phy/samsung/phy-exynos5250-usb2.c > diff --git a/drivers/phy/phy-s5pv210-usb2.c > b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100% > rename from drivers/phy/phy-s5pv210-usb2.c > rename to drivers/phy/samsung/phy-s5pv210-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.c > b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100% > rename from drivers/phy/phy-samsung-usb2.c > rename to drivers/phy/samsung/phy-samsung-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.h > b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100% > rename from drivers/phy/phy-samsung-usb2.h > rename to drivers/phy/samsung/phy-samsung-usb2.h > diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig > new file mode 100644 > index 0000000..651b2bf > --- /dev/null > +++ b/drivers/phy/st/Kconfig > @@ -0,0 +1,51 @@ > +# > +# PHY drivers for ST Micro platforms > +# > +config PHY_MIPHY28LP > + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > + that is part of STMicroelectronics STiH407 SoC. > + > +config PHY_MIPHY365X > + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > + depends on ARCH_STI > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE) > + that is part of STMicroelectronics STiH41x SoC series. > + > +config PHY_ST_SPEAR1310_MIPHY > + tristate "ST SPEAR1310-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1310 || COMPILE_TEST > + help > + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > + > +config PHY_ST_SPEAR1340_MIPHY > + tristate "ST SPEAR1340-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1340 || COMPILE_TEST > + help > + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > + > +config PHY_STIH407_USB > + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > + depends on RESET_CONTROLLER > + depends on ARCH_STI || COMPILE_TEST > + select GENERIC_PHY > + help > + Enable this support to enable the picoPHY device used by USB2 > + and USB3 controllers on STMicroelectronics STiH407 SoC families. > + > +config PHY_STIH41X_USB > + tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the USB transceiver that is part of > + STMicroelectronics STiH41x SoC series. > diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile > new file mode 100644 > index 0000000..907561b > --- /dev/null > +++ b/drivers/phy/st/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c > similarity index 100% > rename from drivers/phy/phy-miphy28lp.c > rename to drivers/phy/st/phy-miphy28lp.c > diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c > similarity index 100% > rename from drivers/phy/phy-miphy365x.c > rename to drivers/phy/st/phy-miphy365x.c > diff --git a/drivers/phy/phy-spear1310-miphy.c > b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1310-miphy.c > rename to drivers/phy/st/phy-spear1310-miphy.c > diff --git a/drivers/phy/phy-spear1340-miphy.c > b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1340-miphy.c > rename to drivers/phy/st/phy-spear1340-miphy.c > diff --git a/drivers/phy/phy-stih407-usb.c > b/drivers/phy/st/phy-stih407-usb.c similarity index 100% > rename from drivers/phy/phy-stih407-usb.c > rename to drivers/phy/st/phy-stih407-usb.c > diff --git a/drivers/phy/phy-stih41x-usb.c > b/drivers/phy/st/phy-stih41x-usb.c similarity index 100% > rename from drivers/phy/phy-stih41x-usb.c > rename to drivers/phy/st/phy-stih41x-usb.c > diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig > new file mode 100644 > index 0000000..eb06427 > --- /dev/null > +++ b/drivers/phy/sunxi/Kconfig > @@ -0,0 +1,28 @@ > +# > +# PHY drivers for Allwinner's sunxi platforms > +# > +config PHY_SUN4I_USB > + tristate "Allwinner sunxi SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on EXTCON > + depends on POWER_SUPPLY > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sunxi SoCs. > + > + This driver controls the entire USB PHY block, both the USB OTG > + parts, as well as the 2 regular USB 2 host PHYs. > + > +config PHY_SUN9I_USB > + tristate "Allwinner sun9i SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on USB_COMMON > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sun9i SoCs. > + > + This driver controls each individual USB 2 host PHY. > diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile > new file mode 100644 > index 0000000..8605529c > --- /dev/null > +++ b/drivers/phy/sunxi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > diff --git a/drivers/phy/phy-sun4i-usb.c > b/drivers/phy/sunxi/phy-sun4i-usb.c similarity index 100% > rename from drivers/phy/phy-sun4i-usb.c > rename to drivers/phy/sunxi/phy-sun4i-usb.c > diff --git a/drivers/phy/phy-sun9i-usb.c > b/drivers/phy/sunxi/phy-sun9i-usb.c similarity index 100% > rename from drivers/phy/phy-sun9i-usb.c > rename to drivers/phy/sunxi/phy-sun9i-usb.c > diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig > new file mode 100644 > index 0000000..1e3e307 > --- /dev/null > +++ b/drivers/phy/ti/Kconfig > @@ -0,0 +1,67 @@ > +# > +# PHY drivers for TI platforms > +# > +config PHY_DM816X_USB > + tristate "TI dm816x USB PHY driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this for dm816x USB to work. > + > +config OMAP_CONTROL_PHY > + tristate "OMAP CONTROL PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + help > + Enable this to add support for the PHY part present in the control > + module. This driver has API to power on the USB2 PHY and to write to > + the mailbox. The mailbox is present only in omap4 and the register to > + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > + additional register to power on USB3 PHY/SATA PHY/PCIE PHY > + (PIPE3 PHY). > + > +config OMAP_USB2 > + tristate "OMAP USB2 PHY Driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the transceiver that is part of SOC. This > + driver takes care of all the PHY functionality apart from comparator. > + The USB OTG controller communicates with the comparator using this > + driver. > + > +config TI_PIPE3 > + tristate "TI PIPE3 PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + select GENERIC_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the PIPE3 PHY that is part of TI SOCs. This > + driver takes care of all the PHY functionality apart from comparator. > + This driver interacts with the "OMAP Control PHY Driver" to power > + on/off the PHY. > + > +config PHY_TUSB1210 > + tristate "TI TUSB1210 ULPI PHY module" > + depends on USB_ULPI_BUS > + select GENERIC_PHY > + help > + Support for TI TUSB1210 USB ULPI PHY. > + > +config TWL4030_USB > + tristate "TWL4030 USB Transceiver Driver" > + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this to support the USB OTG transceiver on TWL4030 > + family chips (including the TWL5030 and TPS659x0 devices). > + This transceiver supports high and full speed devices plus, > + in host mode, low speed. > diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile > new file mode 100644 > index 0000000..2d16f77 > --- /dev/null > +++ b/drivers/phy/ti/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > diff --git a/drivers/phy/phy-dm816x-usb.c > b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100% > rename from drivers/phy/phy-dm816x-usb.c > rename to drivers/phy/ti/phy-dm816x-usb.c > diff --git a/drivers/phy/phy-omap-control.c > b/drivers/phy/ti/phy-omap-control.c similarity index 100% > rename from drivers/phy/phy-omap-control.c > rename to drivers/phy/ti/phy-omap-control.c > diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c > similarity index 100% > rename from drivers/phy/phy-omap-usb2.c > rename to drivers/phy/ti/phy-omap-usb2.c > diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c > similarity index 100% > rename from drivers/phy/phy-ti-pipe3.c > rename to drivers/phy/ti/phy-ti-pipe3.c > diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c > similarity index 100% > rename from drivers/phy/phy-tusb1210.c > rename to drivers/phy/ti/phy-tusb1210.c > diff --git a/drivers/phy/phy-twl4030-usb.c > b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100% > rename from drivers/phy/phy-twl4030-usb.c > rename to drivers/phy/ti/phy-twl4030-usb.c > diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h > similarity index 100% > rename from drivers/phy/ulpi_phy.h > rename to drivers/phy/ti/ulpi_phy.h From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers Date: Fri, 01 Apr 2016 17:16:59 +0200 Message-ID: <2184537.UxPmHQG1V3@phil> References: <1459510156-9147-1-git-send-email-gautam.vivek@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <1459510156-9147-1-git-send-email-gautam.vivek-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Vivek Gautam Cc: vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, shiraz.linux.kernel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, kishon-l0cyMroinI0@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, spear-devel-nkJGhpqTU55BDgjK7y7TUQ@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, cpgs-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org List-Id: linux-omap@vger.kernel.org Am Freitag, 1. April 2016, 16:59:15 schrieb Vivek Gautam: > Adding vendor specific directories in phy to group > phy drivers under their respective vendor umbrella. > > Signed-off-by: Vivek Gautam I don't have a preference about the phy-locations either way, so for Rockchip phys Acked-by: Heiko Stuebner > --- > > With growing number of phy drivers, it makes sense to > group these drivers under their respective vendor/platform > umbrella directory. > > Build-tested 'multi_v7_defconfig'. > > drivers/phy/Kconfig | 386 > +--------------------- drivers/phy/Makefile > | 57 +--- > drivers/phy/bcom/Kconfig | 27 ++ > drivers/phy/bcom/Makefile | 3 + > drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 > drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 > drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 > drivers/phy/hisi/Kconfig | 20 ++ > drivers/phy/hisi/Makefile | 2 + > drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 > drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 > drivers/phy/marvell/Kconfig | 50 +++ > drivers/phy/marvell/Makefile | 6 + > drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 > drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 > drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 > drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 > drivers/phy/qcom/Kconfig | 23 ++ > drivers/phy/qcom/Makefile | 5 + > drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 > drivers/phy/rcar/Kconfig | 16 + > drivers/phy/rcar/Makefile | 2 + > drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 > drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 > drivers/phy/rockchip/Kconfig | 23 ++ > drivers/phy/rockchip/Makefile | 3 + > drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 > drivers/phy/samsung/Kconfig | 87 +++++ > drivers/phy/samsung/Makefile | 10 + > drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 > drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 > drivers/phy/st/Kconfig | 51 +++ > drivers/phy/st/Makefile | 6 + > drivers/phy/{ => st}/phy-miphy28lp.c | 0 > drivers/phy/{ => st}/phy-miphy365x.c | 0 > drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 > drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 > drivers/phy/{ => st}/phy-stih407-usb.c | 0 > drivers/phy/{ => st}/phy-stih41x-usb.c | 0 > drivers/phy/sunxi/Kconfig | 28 ++ > drivers/phy/sunxi/Makefile | 2 + > drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 > drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 > drivers/phy/ti/Kconfig | 67 ++++ > drivers/phy/ti/Makefile | 6 + > drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 > drivers/phy/{ => ti}/phy-omap-control.c | 0 > drivers/phy/{ => ti}/phy-omap-usb2.c | 0 > drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 > drivers/phy/{ => ti}/phy-tusb1210.c | 0 > drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 > drivers/phy/{ => ti}/ulpi_phy.h | 0 > 71 files changed, 464 insertions(+), 416 deletions(-) > create mode 100644 drivers/phy/bcom/Kconfig > create mode 100644 drivers/phy/bcom/Makefile > rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) > rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) > rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) > create mode 100644 drivers/phy/hisi/Kconfig > create mode 100644 drivers/phy/hisi/Makefile > rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) > rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) > create mode 100644 drivers/phy/marvell/Kconfig > create mode 100644 drivers/phy/marvell/Makefile > rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) > rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) > create mode 100644 drivers/phy/qcom/Kconfig > create mode 100644 drivers/phy/qcom/Makefile > rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) > create mode 100644 drivers/phy/rcar/Kconfig > create mode 100644 drivers/phy/rcar/Makefile > rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) > rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) > create mode 100644 drivers/phy/rockchip/Kconfig > create mode 100644 drivers/phy/rockchip/Makefile > rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) > create mode 100644 drivers/phy/samsung/Kconfig > create mode 100644 drivers/phy/samsung/Makefile > rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) > create mode 100644 drivers/phy/st/Kconfig > create mode 100644 drivers/phy/st/Makefile > rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) > rename drivers/phy/{ => st}/phy-miphy365x.c (100%) > rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) > rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) > rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) > rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) > create mode 100644 drivers/phy/sunxi/Kconfig > create mode 100644 drivers/phy/sunxi/Makefile > rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) > rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) > create mode 100644 drivers/phy/ti/Kconfig > create mode 100644 drivers/phy/ti/Makefile > rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) > rename drivers/phy/{ => ti}/phy-omap-control.c (100%) > rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) > rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) > rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) > rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) > rename drivers/phy/{ => ti}/ulpi_phy.h (100%) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 26566db..80c8c68 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -15,45 +15,6 @@ config GENERIC_PHY > phy users can obtain reference to the PHY. All the users of this > framework should select this config. > > -config PHY_BERLIN_USB > - tristate "Marvell Berlin USB PHY Driver" > - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the USB PHY on Marvell Berlin SoCs. > - > -config PHY_BERLIN_SATA > - tristate "Marvell Berlin SATA PHY driver" > - depends on ARCH_BERLIN && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the SATA PHY on Marvell Berlin SoCs. > - > -config ARMADA375_USBCLUSTER_PHY > - def_bool y > - depends on MACH_ARMADA_375 || COMPILE_TEST > - depends on OF && HAS_IOMEM > - select GENERIC_PHY > - > -config PHY_DM816X_USB > - tristate "TI dm816x USB PHY driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this for dm816x USB to work. > - > -config PHY_EXYNOS_MIPI_VIDEO > - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > - depends on HAS_IOMEM > - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > - select GENERIC_PHY > - default y if ARCH_S5PV210 || ARCH_EXYNOS > - help > - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > - and EXYNOS SoCs. > - > config PHY_LPC18XX_USB_OTG > tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" > depends on OF && (ARCH_LPC18XX || COMPILE_TEST) > @@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG > This driver is need for USB0 support on LPC18xx/43xx and takes > care of enabling and clock setup. > > -config PHY_PXA_28NM_HSIC > - tristate "Marvell USB HSIC 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB HSIC PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell ehci driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_PXA_28NM_USB2 > - tristate "Marvell USB 2.0 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB 2.0 PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell udc/ehci/otg driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_MVEBU_SATA > - def_bool y > - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > - depends on OF > - select GENERIC_PHY > - > -config PHY_MIPHY28LP > - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > - that is part of STMicroelectronics STiH407 SoC. > - > -config PHY_MIPHY365X > - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > - depends on ARCH_STI > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE) > - that is part of STMicroelectronics STiH41x SoC series. > - > -config PHY_RCAR_GEN2 > - tristate "Renesas R-Car generation 2 USB PHY driver" > - depends on ARCH_SHMOBILE > - depends on GENERIC_PHY > - help > - Support for USB PHY found on Renesas R-Car generation 2 SoCs. > - > -config PHY_RCAR_GEN3_USB2 > - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > - depends on OF && ARCH_SHMOBILE > - select GENERIC_PHY > - help > - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > - > -config OMAP_CONTROL_PHY > - tristate "OMAP CONTROL PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - help > - Enable this to add support for the PHY part present in the control > - module. This driver has API to power on the USB2 PHY and to write to > - the mailbox. The mailbox is present only in omap4 and the register to > - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > - additional register to power on USB3 PHY/SATA PHY/PCIE PHY > - (PIPE3 PHY). > - > -config OMAP_USB2 > - tristate "OMAP USB2 PHY Driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the transceiver that is part of SOC. This > - driver takes care of all the PHY functionality apart from comparator. > - The USB OTG controller communicates with the comparator using this > - driver. > - > -config TI_PIPE3 > - tristate "TI PIPE3 PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - select GENERIC_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the PIPE3 PHY that is part of TI SOCs. This > - driver takes care of all the PHY functionality apart from comparator. > - This driver interacts with the "OMAP Control PHY Driver" to power > - on/off the PHY. > - > -config TWL4030_USB > - tristate "TWL4030 USB Transceiver Driver" > - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this to support the USB OTG transceiver on TWL4030 > - family chips (including the TWL5030 and TPS659x0 devices). > - This transceiver supports high and full speed devices plus, > - in host mode, low speed. > - > -config PHY_EXYNOS_DP_VIDEO > - tristate "EXYNOS SoC series Display Port PHY driver" > - depends on OF > - depends on ARCH_EXYNOS || COMPILE_TEST > - default ARCH_EXYNOS > - select GENERIC_PHY > - help > - Support for Display Port PHY found on Samsung EXYNOS SoCs. > - > -config BCM_KONA_USB2_PHY > - tristate "Broadcom Kona USB2 PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support the Broadcom Kona USB 2.0 PHY. > - > -config PHY_EXYNOS5250_SATA > - tristate "Exynos5250 Sata SerDes/PHY driver" > - depends on SOC_EXYNOS5250 > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - select I2C > - select I2C_S3C2410 > - select MFD_SYSCON > - help > - Enable this to support SATA SerDes/Phy found on Samsung's > - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > - port to accept one SATA device. > - > -config PHY_HIX5HD2_SATA > - tristate "HIX5HD2 SATA PHY Driver" > - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Support for SATA PHY on Hisilicon hix5hd2 Soc. > - > config PHY_MT65XX_USB3 > tristate "Mediatek USB3.0 PHY Driver" > depends on ARCH_MEDIATEK && OF > @@ -222,93 +35,6 @@ config PHY_MT65XX_USB3 > for mt65xx SoCs. it supports two usb2.0 ports and > one usb3.0 port. > > -config PHY_HI6220_USB > - tristate "hi6220 USB PHY support" > - depends on (ARCH_HISI && ARM64) || COMPILE_TEST > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Enable this to support the HISILICON HI6220 USB PHY. > - > - To compile this driver as a module, choose M here. > - > -config PHY_SUN4I_USB > - tristate "Allwinner sunxi SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on EXTCON > - depends on POWER_SUPPLY > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sunxi SoCs. > - > - This driver controls the entire USB PHY block, both the USB OTG > - parts, as well as the 2 regular USB 2 host PHYs. > - > -config PHY_SUN9I_USB > - tristate "Allwinner sun9i SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on USB_COMMON > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sun9i SoCs. > - > - This driver controls each individual USB 2 host PHY. > - > -config PHY_SAMSUNG_USB2 > - tristate "Samsung USB 2.0 PHY driver" > - depends on HAS_IOMEM > - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > - select GENERIC_PHY > - select MFD_SYSCON > - default ARCH_EXYNOS > - help > - Enable this to support the Samsung USB 2.0 PHY driver for Samsung > - SoCs. This driver provides the interface for USB 2.0 PHY. Support > - for particular PHYs will be enabled based on the SoC type in addition > - to this driver. > - > -config PHY_S5PV210_USB2 > - bool "Support for S5PV210" > - depends on PHY_SAMSUNG_USB2 > - depends on ARCH_S5PV210 > - help > - Enable USB PHY support for S5PV210. This option requires that Samsung > - USB 2.0 PHY driver is enabled and means that support for this > - particular SoC is compiled in the driver. In case of S5PV210 two phys > - are available - device and host. > - > -config PHY_EXYNOS4210_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default CPU_EXYNOS4210 > - > -config PHY_EXYNOS4X12_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > - > -config PHY_EXYNOS5250_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS5250 || SOC_EXYNOS5420 > - > -config PHY_EXYNOS5_USBDRD > - tristate "Exynos5 SoC series USB DRD PHY driver" > - depends on ARCH_EXYNOS && OF > - depends on HAS_IOMEM > - depends on USB_DWC3_EXYNOS > - select GENERIC_PHY > - select MFD_SYSCON > - default y > - help > - Enable USB DRD PHY support for Exynos 5 SoC series. > - This driver provides PHY interface for USB 3.0 DRD controller > - present on Exynos5 SoC series. > - > config PHY_PISTACHIO_USB > tristate "IMG Pistachio USB2.0 PHY driver" > depends on MACH_PISTACHIO > @@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB > help > Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. > > -config PHY_QCOM_APQ8064_SATA > - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_QCOM_IPQ806X_SATA > - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_ROCKCHIP_USB > - tristate "Rockchip USB2 PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip USB 2.0 PHY. > - > -config PHY_ROCKCHIP_EMMC > - tristate "Rockchip EMMC PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip EMMC PHY. > - > -config PHY_ROCKCHIP_DP > - tristate "Rockchip Display Port PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip Display Port PHY. > - > -config PHY_ST_SPEAR1310_MIPHY > - tristate "ST SPEAR1310-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1310 || COMPILE_TEST > - help > - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > - > -config PHY_ST_SPEAR1340_MIPHY > - tristate "ST SPEAR1340-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1340 || COMPILE_TEST > - help > - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > - > config PHY_XGENE > tristate "APM X-Gene 15Gbps PHY support" > depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) > @@ -372,53 +49,20 @@ config PHY_XGENE > help > This option enables support for APM X-Gene SoC multi-purpose PHY. > > -config PHY_STIH407_USB > - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > - depends on RESET_CONTROLLER > - depends on ARCH_STI || COMPILE_TEST > - select GENERIC_PHY > - help > - Enable this support to enable the picoPHY device used by USB2 > - and USB3 controllers on STMicroelectronics STiH407 SoC families. > - > -config PHY_STIH41X_USB > - tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the USB transceiver that is part of > - STMicroelectronics STiH41x SoC series. > - > -config PHY_QCOM_UFS > - tristate "Qualcomm UFS PHY driver" > - depends on OF && ARCH_QCOM > - select GENERIC_PHY > - help > - Support for UFS PHY on QCOM chipsets. > - > -config PHY_TUSB1210 > - tristate "TI TUSB1210 ULPI PHY module" > - depends on USB_ULPI_BUS > - select GENERIC_PHY > - help > - Support for TI TUSB1210 USB ULPI PHY. > - > -config PHY_BRCMSTB_SATA > - tristate "Broadcom STB SATA PHY driver" > - depends on ARCH_BRCMSTB || BMIPS_GENERIC > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled. > - > -config PHY_CYGNUS_PCIE > - tristate "Broadcom Cygnus PCIe PHY driver" > - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > - select GENERIC_PHY > - default ARCH_BCM_CYGNUS > - help > - Enable this to support the Broadcom Cygnus PCIe PHY. > - If unsure, say N. > +menuconfig PHY_PLAT > + bool "Platform Phy drivers" > + > +if PHY_PLAT > +source "drivers/phy/bcom/Kconfig" > +source "drivers/phy/hisi/Kconfig" > +source "drivers/phy/marvell/Kconfig" > +source "drivers/phy/qcom/Kconfig" > +source "drivers/phy/rcar/Kconfig" > +source "drivers/phy/rockchip/Kconfig" > +source "drivers/phy/samsung/Kconfig" > +source "drivers/phy/st/Kconfig" > +source "drivers/phy/sunxi/Kconfig" > +source "drivers/phy/ti/Kconfig" > +endif > > endmenu > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 24596a9..73d563b 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -3,52 +3,19 @@ > # > > obj-$(CONFIG_GENERIC_PHY) += phy-core.o > -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o > -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o > -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > -phy-exynos-usb2-y += phy-samsung-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > obj-$(CONFIG_PHY_XGENE) += phy-xgene.o > -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o > -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o > -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > + > +# Phy drivers for different platforms. > +obj-$(CONFIG_PHY_PLAT) += bcom/ \ > + hisi/ \ > + marvell/ \ > + qcom/ \ > + rcar/ \ > + rockchip/ \ > + samsung/ \ > + st/ \ > + sunxi/ \ > + ti/ > diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig > new file mode 100644 > index 0000000..8243372 > --- /dev/null > +++ b/drivers/phy/bcom/Kconfig > @@ -0,0 +1,27 @@ > +# > +# PHY drivers for Broadcom platforms > +# > +config PHY_CYGNUS_PCIE > + tristate "Broadcom Cygnus PCIe PHY driver" > + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > + select GENERIC_PHY > + default ARCH_BCM_CYGNUS > + help > + Enable this to support the Broadcom Cygnus PCIe PHY. > + If unsure, say N. > + > +config BCM_KONA_USB2_PHY > + tristate "Broadcom Kona USB2 PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support the Broadcom Kona USB 2.0 PHY. > + > +config PHY_BRCMSTB_SATA > + tristate "Broadcom STB SATA PHY driver" > + depends on ARCH_BRCMSTB || BMIPS_GENERIC > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled. > diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile > new file mode 100644 > index 0000000..f30fa76 > --- /dev/null > +++ b/drivers/phy/bcom/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c > b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c similarity index 100% > rename from drivers/phy/phy-bcm-cygnus-pcie.c > rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c > diff --git a/drivers/phy/phy-bcm-kona-usb2.c > b/drivers/phy/bcom/phy-bcm-kona-usb2.c similarity index 100% > rename from drivers/phy/phy-bcm-kona-usb2.c > rename to drivers/phy/bcom/phy-bcm-kona-usb2.c > diff --git a/drivers/phy/phy-brcmstb-sata.c > b/drivers/phy/bcom/phy-brcmstb-sata.c similarity index 100% > rename from drivers/phy/phy-brcmstb-sata.c > rename to drivers/phy/bcom/phy-brcmstb-sata.c > diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig > new file mode 100644 > index 0000000..affa9ed > --- /dev/null > +++ b/drivers/phy/hisi/Kconfig > @@ -0,0 +1,20 @@ > +# > +# PHY drivers for HiSilicon platforms > +# > +config PHY_HIX5HD2_SATA > + tristate "HIX5HD2 SATA PHY Driver" > + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Support for SATA PHY on Hisilicon hix5hd2 Soc. > + > +config PHY_HI6220_USB > + tristate "hi6220 USB PHY support" > + depends on (ARCH_HISI && ARM64) || COMPILE_TEST > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Enable this to support the HISILICON HI6220 USB PHY. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile > new file mode 100644 > index 0000000..6059ed8 > --- /dev/null > +++ b/drivers/phy/hisi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > diff --git a/drivers/phy/phy-hi6220-usb.c > b/drivers/phy/hisi/phy-hi6220-usb.c similarity index 100% > rename from drivers/phy/phy-hi6220-usb.c > rename to drivers/phy/hisi/phy-hi6220-usb.c > diff --git a/drivers/phy/phy-hix5hd2-sata.c > b/drivers/phy/hisi/phy-hix5hd2-sata.c similarity index 100% > rename from drivers/phy/phy-hix5hd2-sata.c > rename to drivers/phy/hisi/phy-hix5hd2-sata.c > diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig > new file mode 100644 > index 0000000..6c1576c > --- /dev/null > +++ b/drivers/phy/marvell/Kconfig > @@ -0,0 +1,50 @@ > +# > +# PHY drivers for Marvell platforms > +# > +config ARMADA375_USBCLUSTER_PHY > + def_bool y > + depends on MACH_ARMADA_375 || COMPILE_TEST > + depends on OF && HAS_IOMEM > + select GENERIC_PHY > + > +config PHY_BERLIN_USB > + tristate "Marvell Berlin USB PHY Driver" > + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the USB PHY on Marvell Berlin SoCs. > + > +config PHY_BERLIN_SATA > + tristate "Marvell Berlin SATA PHY driver" > + depends on ARCH_BERLIN && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the SATA PHY on Marvell Berlin SoCs. > + > +config PHY_MVEBU_SATA > + def_bool y > + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > + depends on OF > + select GENERIC_PHY > + > +config PHY_PXA_28NM_HSIC > + tristate "Marvell USB HSIC 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB HSIC PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell ehci driver. > + > + To compile this driver as a module, choose M here. > + > +config PHY_PXA_28NM_USB2 > + tristate "Marvell USB 2.0 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB 2.0 PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell udc/ehci/otg driver. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile > new file mode 100644 > index 0000000..f4fa255 > --- /dev/null > +++ b/drivers/phy/marvell/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > diff --git a/drivers/phy/phy-armada375-usb2.c > b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100% > rename from drivers/phy/phy-armada375-usb2.c > rename to drivers/phy/marvell/phy-armada375-usb2.c > diff --git a/drivers/phy/phy-berlin-sata.c > b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100% > rename from drivers/phy/phy-berlin-sata.c > rename to drivers/phy/marvell/phy-berlin-sata.c > diff --git a/drivers/phy/phy-berlin-usb.c > b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100% > rename from drivers/phy/phy-berlin-usb.c > rename to drivers/phy/marvell/phy-berlin-usb.c > diff --git a/drivers/phy/phy-mvebu-sata.c > b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100% > rename from drivers/phy/phy-mvebu-sata.c > rename to drivers/phy/marvell/phy-mvebu-sata.c > diff --git a/drivers/phy/phy-pxa-28nm-hsic.c > b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-hsic.c > rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c > diff --git a/drivers/phy/phy-pxa-28nm-usb2.c > b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-usb2.c > rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c > diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig > new file mode 100644 > index 0000000..9718d01 > --- /dev/null > +++ b/drivers/phy/qcom/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Qualcomm platforms > +# > +config PHY_QCOM_APQ8064_SATA > + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_IPQ806X_SATA > + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_UFS > + tristate "Qualcomm UFS PHY driver" > + depends on OF && ARCH_QCOM > + select GENERIC_PHY > + help > + Support for UFS PHY on QCOM chipsets. > diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile > new file mode 100644 > index 0000000..2db3e77 > --- /dev/null > +++ b/drivers/phy/qcom/Makefile > @@ -0,0 +1,5 @@ > +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \ > + += phy-qcom-ufs-qmp-20nm.o \ > + += phy-qcom-ufs-qmp-14nm.o > diff --git a/drivers/phy/phy-qcom-apq8064-sata.c > b/drivers/phy/qcom/phy-qcom-apq8064-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-apq8064-sata.c > rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c > diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c > b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-ipq806x-sata.c > rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c > diff --git a/drivers/phy/phy-qcom-ufs-i.h > b/drivers/phy/qcom/phy-qcom-ufs-i.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-i.h > rename to drivers/phy/qcom/phy-qcom-ufs-i.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h > diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c > similarity index 100% > rename from drivers/phy/phy-qcom-ufs.c > rename to drivers/phy/qcom/phy-qcom-ufs.c > diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig > new file mode 100644 > index 0000000..169b5e2 > --- /dev/null > +++ b/drivers/phy/rcar/Kconfig > @@ -0,0 +1,16 @@ > +# > +# PHY drivers for Renesas's r-car platforms > +# > +config PHY_RCAR_GEN2 > + tristate "Renesas R-Car generation 2 USB PHY driver" > + depends on ARCH_SHMOBILE > + depends on GENERIC_PHY > + help > + Support for USB PHY found on Renesas R-Car generation 2 SoCs. > + > +config PHY_RCAR_GEN3_USB2 > + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > + depends on OF && ARCH_SHMOBILE > + select GENERIC_PHY > + help > + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile > new file mode 100644 > index 0000000..695241a > --- /dev/null > +++ b/drivers/phy/rcar/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > diff --git a/drivers/phy/phy-rcar-gen2.c > b/drivers/phy/rcar/phy-rcar-gen2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen2.c > rename to drivers/phy/rcar/phy-rcar-gen2.c > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c > b/drivers/phy/rcar/phy-rcar-gen3-usb2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen3-usb2.c > rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c > diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig > new file mode 100644 > index 0000000..c575d1e > --- /dev/null > +++ b/drivers/phy/rockchip/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Rockchip platforms > +# > +config PHY_ROCKCHIP_USB > + tristate "Rockchip USB2 PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip USB 2.0 PHY. > + > +config PHY_ROCKCHIP_EMMC > + tristate "Rockchip EMMC PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip EMMC PHY. > + > +config PHY_ROCKCHIP_DP > + tristate "Rockchip Display Port PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip Display Port PHY. > diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile > new file mode 100644 > index 0000000..c15acc1 > --- /dev/null > +++ b/drivers/phy/rockchip/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > diff --git a/drivers/phy/phy-rockchip-dp.c > b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100% > rename from drivers/phy/phy-rockchip-dp.c > rename to drivers/phy/rockchip/phy-rockchip-dp.c > diff --git a/drivers/phy/phy-rockchip-emmc.c > b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100% > rename from drivers/phy/phy-rockchip-emmc.c > rename to drivers/phy/rockchip/phy-rockchip-emmc.c > diff --git a/drivers/phy/phy-rockchip-usb.c > b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100% > rename from drivers/phy/phy-rockchip-usb.c > rename to drivers/phy/rockchip/phy-rockchip-usb.c > diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig > new file mode 100644 > index 0000000..80bdea7 > --- /dev/null > +++ b/drivers/phy/samsung/Kconfig > @@ -0,0 +1,87 @@ > +# > +# PHY drivers for Samsung platforms > +# > +config PHY_SAMSUNG_USB2 > + tristate "Samsung USB 2.0 PHY driver" > + depends on HAS_IOMEM > + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > + select GENERIC_PHY > + select MFD_SYSCON > + default ARCH_EXYNOS > + help > + Enable this to support the Samsung USB 2.0 PHY driver for Samsung > + SoCs. This driver provides the interface for USB 2.0 PHY. Support > + for particular PHYs will be enabled based on the SoC type in addition > + to this driver. > + > +config PHY_S5PV210_USB2 > + bool "Support for S5PV210" > + depends on PHY_SAMSUNG_USB2 > + depends on ARCH_S5PV210 > + help > + Enable USB PHY support for S5PV210. This option requires that Samsung > + USB 2.0 PHY driver is enabled and means that support for this > + particular SoC is compiled in the driver. In case of S5PV210 two phys > + are available - device and host. > + > +config PHY_EXYNOS4210_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default CPU_EXYNOS4210 > + > +config PHY_EXYNOS4X12_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > + > +config PHY_EXYNOS5250_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS5250 || SOC_EXYNOS5420 > + > +config PHY_EXYNOS5_USBDRD > + tristate "Exynos5 SoC series USB DRD PHY driver" > + depends on ARCH_EXYNOS && OF > + depends on HAS_IOMEM > + depends on USB_DWC3_EXYNOS > + select GENERIC_PHY > + select MFD_SYSCON > + default y > + help > + Enable USB DRD PHY support for Exynos 5 SoC series. > + This driver provides PHY interface for USB 3.0 DRD controller > + present on Exynos5 SoC series. > + > +config PHY_EXYNOS_DP_VIDEO > + tristate "EXYNOS SoC series Display Port PHY driver" > + depends on OF > + depends on ARCH_EXYNOS || COMPILE_TEST > + default ARCH_EXYNOS > + select GENERIC_PHY > + help > + Support for Display Port PHY found on Samsung EXYNOS SoCs. > + > +config PHY_EXYNOS_MIPI_VIDEO > + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > + depends on HAS_IOMEM > + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > + select GENERIC_PHY > + default y if ARCH_S5PV210 || ARCH_EXYNOS > + help > + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > + and EXYNOS SoCs. > + > +config PHY_EXYNOS5250_SATA > + tristate "Exynos5250 Sata SerDes/PHY driver" > + depends on SOC_EXYNOS5250 > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + select I2C > + select I2C_S3C2410 > + select MFD_SYSCON > + help > + Enable this to support SATA SerDes/Phy found on Samsung's > + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > + port to accept one SATA device. > diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile > new file mode 100644 > index 0000000..585dbd7 > --- /dev/null > +++ b/drivers/phy/samsung/Makefile > @@ -0,0 +1,10 @@ > +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > +phy-exynos-usb2-y += phy-samsung-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > diff --git a/drivers/phy/phy-exynos-dp-video.c > b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100% > rename from drivers/phy/phy-exynos-dp-video.c > rename to drivers/phy/samsung/phy-exynos-dp-video.c > diff --git a/drivers/phy/phy-exynos-mipi-video.c > b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100% > rename from drivers/phy/phy-exynos-mipi-video.c > rename to drivers/phy/samsung/phy-exynos-mipi-video.c > diff --git a/drivers/phy/phy-exynos4210-usb2.c > b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4210-usb2.c > rename to drivers/phy/samsung/phy-exynos4210-usb2.c > diff --git a/drivers/phy/phy-exynos4x12-usb2.c > b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4x12-usb2.c > rename to drivers/phy/samsung/phy-exynos4x12-usb2.c > diff --git a/drivers/phy/phy-exynos5-usbdrd.c > b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100% > rename from drivers/phy/phy-exynos5-usbdrd.c > rename to drivers/phy/samsung/phy-exynos5-usbdrd.c > diff --git a/drivers/phy/phy-exynos5250-sata.c > b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100% > rename from drivers/phy/phy-exynos5250-sata.c > rename to drivers/phy/samsung/phy-exynos5250-sata.c > diff --git a/drivers/phy/phy-exynos5250-usb2.c > b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos5250-usb2.c > rename to drivers/phy/samsung/phy-exynos5250-usb2.c > diff --git a/drivers/phy/phy-s5pv210-usb2.c > b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100% > rename from drivers/phy/phy-s5pv210-usb2.c > rename to drivers/phy/samsung/phy-s5pv210-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.c > b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100% > rename from drivers/phy/phy-samsung-usb2.c > rename to drivers/phy/samsung/phy-samsung-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.h > b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100% > rename from drivers/phy/phy-samsung-usb2.h > rename to drivers/phy/samsung/phy-samsung-usb2.h > diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig > new file mode 100644 > index 0000000..651b2bf > --- /dev/null > +++ b/drivers/phy/st/Kconfig > @@ -0,0 +1,51 @@ > +# > +# PHY drivers for ST Micro platforms > +# > +config PHY_MIPHY28LP > + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > + that is part of STMicroelectronics STiH407 SoC. > + > +config PHY_MIPHY365X > + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > + depends on ARCH_STI > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE) > + that is part of STMicroelectronics STiH41x SoC series. > + > +config PHY_ST_SPEAR1310_MIPHY > + tristate "ST SPEAR1310-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1310 || COMPILE_TEST > + help > + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > + > +config PHY_ST_SPEAR1340_MIPHY > + tristate "ST SPEAR1340-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1340 || COMPILE_TEST > + help > + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > + > +config PHY_STIH407_USB > + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > + depends on RESET_CONTROLLER > + depends on ARCH_STI || COMPILE_TEST > + select GENERIC_PHY > + help > + Enable this support to enable the picoPHY device used by USB2 > + and USB3 controllers on STMicroelectronics STiH407 SoC families. > + > +config PHY_STIH41X_USB > + tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the USB transceiver that is part of > + STMicroelectronics STiH41x SoC series. > diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile > new file mode 100644 > index 0000000..907561b > --- /dev/null > +++ b/drivers/phy/st/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c > similarity index 100% > rename from drivers/phy/phy-miphy28lp.c > rename to drivers/phy/st/phy-miphy28lp.c > diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c > similarity index 100% > rename from drivers/phy/phy-miphy365x.c > rename to drivers/phy/st/phy-miphy365x.c > diff --git a/drivers/phy/phy-spear1310-miphy.c > b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1310-miphy.c > rename to drivers/phy/st/phy-spear1310-miphy.c > diff --git a/drivers/phy/phy-spear1340-miphy.c > b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1340-miphy.c > rename to drivers/phy/st/phy-spear1340-miphy.c > diff --git a/drivers/phy/phy-stih407-usb.c > b/drivers/phy/st/phy-stih407-usb.c similarity index 100% > rename from drivers/phy/phy-stih407-usb.c > rename to drivers/phy/st/phy-stih407-usb.c > diff --git a/drivers/phy/phy-stih41x-usb.c > b/drivers/phy/st/phy-stih41x-usb.c similarity index 100% > rename from drivers/phy/phy-stih41x-usb.c > rename to drivers/phy/st/phy-stih41x-usb.c > diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig > new file mode 100644 > index 0000000..eb06427 > --- /dev/null > +++ b/drivers/phy/sunxi/Kconfig > @@ -0,0 +1,28 @@ > +# > +# PHY drivers for Allwinner's sunxi platforms > +# > +config PHY_SUN4I_USB > + tristate "Allwinner sunxi SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on EXTCON > + depends on POWER_SUPPLY > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sunxi SoCs. > + > + This driver controls the entire USB PHY block, both the USB OTG > + parts, as well as the 2 regular USB 2 host PHYs. > + > +config PHY_SUN9I_USB > + tristate "Allwinner sun9i SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on USB_COMMON > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sun9i SoCs. > + > + This driver controls each individual USB 2 host PHY. > diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile > new file mode 100644 > index 0000000..8605529c > --- /dev/null > +++ b/drivers/phy/sunxi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > diff --git a/drivers/phy/phy-sun4i-usb.c > b/drivers/phy/sunxi/phy-sun4i-usb.c similarity index 100% > rename from drivers/phy/phy-sun4i-usb.c > rename to drivers/phy/sunxi/phy-sun4i-usb.c > diff --git a/drivers/phy/phy-sun9i-usb.c > b/drivers/phy/sunxi/phy-sun9i-usb.c similarity index 100% > rename from drivers/phy/phy-sun9i-usb.c > rename to drivers/phy/sunxi/phy-sun9i-usb.c > diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig > new file mode 100644 > index 0000000..1e3e307 > --- /dev/null > +++ b/drivers/phy/ti/Kconfig > @@ -0,0 +1,67 @@ > +# > +# PHY drivers for TI platforms > +# > +config PHY_DM816X_USB > + tristate "TI dm816x USB PHY driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this for dm816x USB to work. > + > +config OMAP_CONTROL_PHY > + tristate "OMAP CONTROL PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + help > + Enable this to add support for the PHY part present in the control > + module. This driver has API to power on the USB2 PHY and to write to > + the mailbox. The mailbox is present only in omap4 and the register to > + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > + additional register to power on USB3 PHY/SATA PHY/PCIE PHY > + (PIPE3 PHY). > + > +config OMAP_USB2 > + tristate "OMAP USB2 PHY Driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the transceiver that is part of SOC. This > + driver takes care of all the PHY functionality apart from comparator. > + The USB OTG controller communicates with the comparator using this > + driver. > + > +config TI_PIPE3 > + tristate "TI PIPE3 PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + select GENERIC_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the PIPE3 PHY that is part of TI SOCs. This > + driver takes care of all the PHY functionality apart from comparator. > + This driver interacts with the "OMAP Control PHY Driver" to power > + on/off the PHY. > + > +config PHY_TUSB1210 > + tristate "TI TUSB1210 ULPI PHY module" > + depends on USB_ULPI_BUS > + select GENERIC_PHY > + help > + Support for TI TUSB1210 USB ULPI PHY. > + > +config TWL4030_USB > + tristate "TWL4030 USB Transceiver Driver" > + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this to support the USB OTG transceiver on TWL4030 > + family chips (including the TWL5030 and TPS659x0 devices). > + This transceiver supports high and full speed devices plus, > + in host mode, low speed. > diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile > new file mode 100644 > index 0000000..2d16f77 > --- /dev/null > +++ b/drivers/phy/ti/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > diff --git a/drivers/phy/phy-dm816x-usb.c > b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100% > rename from drivers/phy/phy-dm816x-usb.c > rename to drivers/phy/ti/phy-dm816x-usb.c > diff --git a/drivers/phy/phy-omap-control.c > b/drivers/phy/ti/phy-omap-control.c similarity index 100% > rename from drivers/phy/phy-omap-control.c > rename to drivers/phy/ti/phy-omap-control.c > diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c > similarity index 100% > rename from drivers/phy/phy-omap-usb2.c > rename to drivers/phy/ti/phy-omap-usb2.c > diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c > similarity index 100% > rename from drivers/phy/phy-ti-pipe3.c > rename to drivers/phy/ti/phy-ti-pipe3.c > diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c > similarity index 100% > rename from drivers/phy/phy-tusb1210.c > rename to drivers/phy/ti/phy-tusb1210.c > diff --git a/drivers/phy/phy-twl4030-usb.c > b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100% > rename from drivers/phy/phy-twl4030-usb.c > rename to drivers/phy/ti/phy-twl4030-usb.c > diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h > similarity index 100% > rename from drivers/phy/ulpi_phy.h > rename to drivers/phy/ti/ulpi_phy.h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko Stuebner) Date: Fri, 01 Apr 2016 17:16:59 +0200 Subject: [PATCH 1/2] phy: Group vendor specific phy drivers In-Reply-To: <1459510156-9147-1-git-send-email-gautam.vivek@samsung.com> References: <1459510156-9147-1-git-send-email-gautam.vivek@samsung.com> Message-ID: <2184537.UxPmHQG1V3@phil> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am Freitag, 1. April 2016, 16:59:15 schrieb Vivek Gautam: > Adding vendor specific directories in phy to group > phy drivers under their respective vendor umbrella. > > Signed-off-by: Vivek Gautam I don't have a preference about the phy-locations either way, so for Rockchip phys Acked-by: Heiko Stuebner > --- > > With growing number of phy drivers, it makes sense to > group these drivers under their respective vendor/platform > umbrella directory. > > Build-tested 'multi_v7_defconfig'. > > drivers/phy/Kconfig | 386 > +--------------------- drivers/phy/Makefile > | 57 +--- > drivers/phy/bcom/Kconfig | 27 ++ > drivers/phy/bcom/Makefile | 3 + > drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 > drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 > drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 > drivers/phy/hisi/Kconfig | 20 ++ > drivers/phy/hisi/Makefile | 2 + > drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 > drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 > drivers/phy/marvell/Kconfig | 50 +++ > drivers/phy/marvell/Makefile | 6 + > drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 > drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 > drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 > drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 > drivers/phy/qcom/Kconfig | 23 ++ > drivers/phy/qcom/Makefile | 5 + > drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 > drivers/phy/rcar/Kconfig | 16 + > drivers/phy/rcar/Makefile | 2 + > drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 > drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 > drivers/phy/rockchip/Kconfig | 23 ++ > drivers/phy/rockchip/Makefile | 3 + > drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 > drivers/phy/samsung/Kconfig | 87 +++++ > drivers/phy/samsung/Makefile | 10 + > drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 > drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 > drivers/phy/st/Kconfig | 51 +++ > drivers/phy/st/Makefile | 6 + > drivers/phy/{ => st}/phy-miphy28lp.c | 0 > drivers/phy/{ => st}/phy-miphy365x.c | 0 > drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 > drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 > drivers/phy/{ => st}/phy-stih407-usb.c | 0 > drivers/phy/{ => st}/phy-stih41x-usb.c | 0 > drivers/phy/sunxi/Kconfig | 28 ++ > drivers/phy/sunxi/Makefile | 2 + > drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 > drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 > drivers/phy/ti/Kconfig | 67 ++++ > drivers/phy/ti/Makefile | 6 + > drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 > drivers/phy/{ => ti}/phy-omap-control.c | 0 > drivers/phy/{ => ti}/phy-omap-usb2.c | 0 > drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 > drivers/phy/{ => ti}/phy-tusb1210.c | 0 > drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 > drivers/phy/{ => ti}/ulpi_phy.h | 0 > 71 files changed, 464 insertions(+), 416 deletions(-) > create mode 100644 drivers/phy/bcom/Kconfig > create mode 100644 drivers/phy/bcom/Makefile > rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) > rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) > rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) > create mode 100644 drivers/phy/hisi/Kconfig > create mode 100644 drivers/phy/hisi/Makefile > rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) > rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) > create mode 100644 drivers/phy/marvell/Kconfig > create mode 100644 drivers/phy/marvell/Makefile > rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) > rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) > create mode 100644 drivers/phy/qcom/Kconfig > create mode 100644 drivers/phy/qcom/Makefile > rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) > create mode 100644 drivers/phy/rcar/Kconfig > create mode 100644 drivers/phy/rcar/Makefile > rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) > rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) > create mode 100644 drivers/phy/rockchip/Kconfig > create mode 100644 drivers/phy/rockchip/Makefile > rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) > create mode 100644 drivers/phy/samsung/Kconfig > create mode 100644 drivers/phy/samsung/Makefile > rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) > create mode 100644 drivers/phy/st/Kconfig > create mode 100644 drivers/phy/st/Makefile > rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) > rename drivers/phy/{ => st}/phy-miphy365x.c (100%) > rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) > rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) > rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) > rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) > create mode 100644 drivers/phy/sunxi/Kconfig > create mode 100644 drivers/phy/sunxi/Makefile > rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) > rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) > create mode 100644 drivers/phy/ti/Kconfig > create mode 100644 drivers/phy/ti/Makefile > rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) > rename drivers/phy/{ => ti}/phy-omap-control.c (100%) > rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) > rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) > rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) > rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) > rename drivers/phy/{ => ti}/ulpi_phy.h (100%) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 26566db..80c8c68 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -15,45 +15,6 @@ config GENERIC_PHY > phy users can obtain reference to the PHY. All the users of this > framework should select this config. > > -config PHY_BERLIN_USB > - tristate "Marvell Berlin USB PHY Driver" > - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the USB PHY on Marvell Berlin SoCs. > - > -config PHY_BERLIN_SATA > - tristate "Marvell Berlin SATA PHY driver" > - depends on ARCH_BERLIN && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the SATA PHY on Marvell Berlin SoCs. > - > -config ARMADA375_USBCLUSTER_PHY > - def_bool y > - depends on MACH_ARMADA_375 || COMPILE_TEST > - depends on OF && HAS_IOMEM > - select GENERIC_PHY > - > -config PHY_DM816X_USB > - tristate "TI dm816x USB PHY driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this for dm816x USB to work. > - > -config PHY_EXYNOS_MIPI_VIDEO > - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > - depends on HAS_IOMEM > - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > - select GENERIC_PHY > - default y if ARCH_S5PV210 || ARCH_EXYNOS > - help > - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > - and EXYNOS SoCs. > - > config PHY_LPC18XX_USB_OTG > tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" > depends on OF && (ARCH_LPC18XX || COMPILE_TEST) > @@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG > This driver is need for USB0 support on LPC18xx/43xx and takes > care of enabling and clock setup. > > -config PHY_PXA_28NM_HSIC > - tristate "Marvell USB HSIC 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB HSIC PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell ehci driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_PXA_28NM_USB2 > - tristate "Marvell USB 2.0 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB 2.0 PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell udc/ehci/otg driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_MVEBU_SATA > - def_bool y > - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > - depends on OF > - select GENERIC_PHY > - > -config PHY_MIPHY28LP > - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > - that is part of STMicroelectronics STiH407 SoC. > - > -config PHY_MIPHY365X > - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > - depends on ARCH_STI > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE) > - that is part of STMicroelectronics STiH41x SoC series. > - > -config PHY_RCAR_GEN2 > - tristate "Renesas R-Car generation 2 USB PHY driver" > - depends on ARCH_SHMOBILE > - depends on GENERIC_PHY > - help > - Support for USB PHY found on Renesas R-Car generation 2 SoCs. > - > -config PHY_RCAR_GEN3_USB2 > - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > - depends on OF && ARCH_SHMOBILE > - select GENERIC_PHY > - help > - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > - > -config OMAP_CONTROL_PHY > - tristate "OMAP CONTROL PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - help > - Enable this to add support for the PHY part present in the control > - module. This driver has API to power on the USB2 PHY and to write to > - the mailbox. The mailbox is present only in omap4 and the register to > - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > - additional register to power on USB3 PHY/SATA PHY/PCIE PHY > - (PIPE3 PHY). > - > -config OMAP_USB2 > - tristate "OMAP USB2 PHY Driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the transceiver that is part of SOC. This > - driver takes care of all the PHY functionality apart from comparator. > - The USB OTG controller communicates with the comparator using this > - driver. > - > -config TI_PIPE3 > - tristate "TI PIPE3 PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - select GENERIC_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the PIPE3 PHY that is part of TI SOCs. This > - driver takes care of all the PHY functionality apart from comparator. > - This driver interacts with the "OMAP Control PHY Driver" to power > - on/off the PHY. > - > -config TWL4030_USB > - tristate "TWL4030 USB Transceiver Driver" > - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this to support the USB OTG transceiver on TWL4030 > - family chips (including the TWL5030 and TPS659x0 devices). > - This transceiver supports high and full speed devices plus, > - in host mode, low speed. > - > -config PHY_EXYNOS_DP_VIDEO > - tristate "EXYNOS SoC series Display Port PHY driver" > - depends on OF > - depends on ARCH_EXYNOS || COMPILE_TEST > - default ARCH_EXYNOS > - select GENERIC_PHY > - help > - Support for Display Port PHY found on Samsung EXYNOS SoCs. > - > -config BCM_KONA_USB2_PHY > - tristate "Broadcom Kona USB2 PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support the Broadcom Kona USB 2.0 PHY. > - > -config PHY_EXYNOS5250_SATA > - tristate "Exynos5250 Sata SerDes/PHY driver" > - depends on SOC_EXYNOS5250 > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - select I2C > - select I2C_S3C2410 > - select MFD_SYSCON > - help > - Enable this to support SATA SerDes/Phy found on Samsung's > - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > - port to accept one SATA device. > - > -config PHY_HIX5HD2_SATA > - tristate "HIX5HD2 SATA PHY Driver" > - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Support for SATA PHY on Hisilicon hix5hd2 Soc. > - > config PHY_MT65XX_USB3 > tristate "Mediatek USB3.0 PHY Driver" > depends on ARCH_MEDIATEK && OF > @@ -222,93 +35,6 @@ config PHY_MT65XX_USB3 > for mt65xx SoCs. it supports two usb2.0 ports and > one usb3.0 port. > > -config PHY_HI6220_USB > - tristate "hi6220 USB PHY support" > - depends on (ARCH_HISI && ARM64) || COMPILE_TEST > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Enable this to support the HISILICON HI6220 USB PHY. > - > - To compile this driver as a module, choose M here. > - > -config PHY_SUN4I_USB > - tristate "Allwinner sunxi SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on EXTCON > - depends on POWER_SUPPLY > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sunxi SoCs. > - > - This driver controls the entire USB PHY block, both the USB OTG > - parts, as well as the 2 regular USB 2 host PHYs. > - > -config PHY_SUN9I_USB > - tristate "Allwinner sun9i SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on USB_COMMON > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sun9i SoCs. > - > - This driver controls each individual USB 2 host PHY. > - > -config PHY_SAMSUNG_USB2 > - tristate "Samsung USB 2.0 PHY driver" > - depends on HAS_IOMEM > - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > - select GENERIC_PHY > - select MFD_SYSCON > - default ARCH_EXYNOS > - help > - Enable this to support the Samsung USB 2.0 PHY driver for Samsung > - SoCs. This driver provides the interface for USB 2.0 PHY. Support > - for particular PHYs will be enabled based on the SoC type in addition > - to this driver. > - > -config PHY_S5PV210_USB2 > - bool "Support for S5PV210" > - depends on PHY_SAMSUNG_USB2 > - depends on ARCH_S5PV210 > - help > - Enable USB PHY support for S5PV210. This option requires that Samsung > - USB 2.0 PHY driver is enabled and means that support for this > - particular SoC is compiled in the driver. In case of S5PV210 two phys > - are available - device and host. > - > -config PHY_EXYNOS4210_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default CPU_EXYNOS4210 > - > -config PHY_EXYNOS4X12_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > - > -config PHY_EXYNOS5250_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS5250 || SOC_EXYNOS5420 > - > -config PHY_EXYNOS5_USBDRD > - tristate "Exynos5 SoC series USB DRD PHY driver" > - depends on ARCH_EXYNOS && OF > - depends on HAS_IOMEM > - depends on USB_DWC3_EXYNOS > - select GENERIC_PHY > - select MFD_SYSCON > - default y > - help > - Enable USB DRD PHY support for Exynos 5 SoC series. > - This driver provides PHY interface for USB 3.0 DRD controller > - present on Exynos5 SoC series. > - > config PHY_PISTACHIO_USB > tristate "IMG Pistachio USB2.0 PHY driver" > depends on MACH_PISTACHIO > @@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB > help > Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. > > -config PHY_QCOM_APQ8064_SATA > - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_QCOM_IPQ806X_SATA > - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_ROCKCHIP_USB > - tristate "Rockchip USB2 PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip USB 2.0 PHY. > - > -config PHY_ROCKCHIP_EMMC > - tristate "Rockchip EMMC PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip EMMC PHY. > - > -config PHY_ROCKCHIP_DP > - tristate "Rockchip Display Port PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip Display Port PHY. > - > -config PHY_ST_SPEAR1310_MIPHY > - tristate "ST SPEAR1310-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1310 || COMPILE_TEST > - help > - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > - > -config PHY_ST_SPEAR1340_MIPHY > - tristate "ST SPEAR1340-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1340 || COMPILE_TEST > - help > - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > - > config PHY_XGENE > tristate "APM X-Gene 15Gbps PHY support" > depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) > @@ -372,53 +49,20 @@ config PHY_XGENE > help > This option enables support for APM X-Gene SoC multi-purpose PHY. > > -config PHY_STIH407_USB > - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > - depends on RESET_CONTROLLER > - depends on ARCH_STI || COMPILE_TEST > - select GENERIC_PHY > - help > - Enable this support to enable the picoPHY device used by USB2 > - and USB3 controllers on STMicroelectronics STiH407 SoC families. > - > -config PHY_STIH41X_USB > - tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the USB transceiver that is part of > - STMicroelectronics STiH41x SoC series. > - > -config PHY_QCOM_UFS > - tristate "Qualcomm UFS PHY driver" > - depends on OF && ARCH_QCOM > - select GENERIC_PHY > - help > - Support for UFS PHY on QCOM chipsets. > - > -config PHY_TUSB1210 > - tristate "TI TUSB1210 ULPI PHY module" > - depends on USB_ULPI_BUS > - select GENERIC_PHY > - help > - Support for TI TUSB1210 USB ULPI PHY. > - > -config PHY_BRCMSTB_SATA > - tristate "Broadcom STB SATA PHY driver" > - depends on ARCH_BRCMSTB || BMIPS_GENERIC > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled. > - > -config PHY_CYGNUS_PCIE > - tristate "Broadcom Cygnus PCIe PHY driver" > - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > - select GENERIC_PHY > - default ARCH_BCM_CYGNUS > - help > - Enable this to support the Broadcom Cygnus PCIe PHY. > - If unsure, say N. > +menuconfig PHY_PLAT > + bool "Platform Phy drivers" > + > +if PHY_PLAT > +source "drivers/phy/bcom/Kconfig" > +source "drivers/phy/hisi/Kconfig" > +source "drivers/phy/marvell/Kconfig" > +source "drivers/phy/qcom/Kconfig" > +source "drivers/phy/rcar/Kconfig" > +source "drivers/phy/rockchip/Kconfig" > +source "drivers/phy/samsung/Kconfig" > +source "drivers/phy/st/Kconfig" > +source "drivers/phy/sunxi/Kconfig" > +source "drivers/phy/ti/Kconfig" > +endif > > endmenu > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 24596a9..73d563b 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -3,52 +3,19 @@ > # > > obj-$(CONFIG_GENERIC_PHY) += phy-core.o > -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o > -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o > -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > -phy-exynos-usb2-y += phy-samsung-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > obj-$(CONFIG_PHY_XGENE) += phy-xgene.o > -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o > -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o > -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > + > +# Phy drivers for different platforms. > +obj-$(CONFIG_PHY_PLAT) += bcom/ \ > + hisi/ \ > + marvell/ \ > + qcom/ \ > + rcar/ \ > + rockchip/ \ > + samsung/ \ > + st/ \ > + sunxi/ \ > + ti/ > diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig > new file mode 100644 > index 0000000..8243372 > --- /dev/null > +++ b/drivers/phy/bcom/Kconfig > @@ -0,0 +1,27 @@ > +# > +# PHY drivers for Broadcom platforms > +# > +config PHY_CYGNUS_PCIE > + tristate "Broadcom Cygnus PCIe PHY driver" > + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > + select GENERIC_PHY > + default ARCH_BCM_CYGNUS > + help > + Enable this to support the Broadcom Cygnus PCIe PHY. > + If unsure, say N. > + > +config BCM_KONA_USB2_PHY > + tristate "Broadcom Kona USB2 PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support the Broadcom Kona USB 2.0 PHY. > + > +config PHY_BRCMSTB_SATA > + tristate "Broadcom STB SATA PHY driver" > + depends on ARCH_BRCMSTB || BMIPS_GENERIC > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled. > diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile > new file mode 100644 > index 0000000..f30fa76 > --- /dev/null > +++ b/drivers/phy/bcom/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c > b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c similarity index 100% > rename from drivers/phy/phy-bcm-cygnus-pcie.c > rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c > diff --git a/drivers/phy/phy-bcm-kona-usb2.c > b/drivers/phy/bcom/phy-bcm-kona-usb2.c similarity index 100% > rename from drivers/phy/phy-bcm-kona-usb2.c > rename to drivers/phy/bcom/phy-bcm-kona-usb2.c > diff --git a/drivers/phy/phy-brcmstb-sata.c > b/drivers/phy/bcom/phy-brcmstb-sata.c similarity index 100% > rename from drivers/phy/phy-brcmstb-sata.c > rename to drivers/phy/bcom/phy-brcmstb-sata.c > diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig > new file mode 100644 > index 0000000..affa9ed > --- /dev/null > +++ b/drivers/phy/hisi/Kconfig > @@ -0,0 +1,20 @@ > +# > +# PHY drivers for HiSilicon platforms > +# > +config PHY_HIX5HD2_SATA > + tristate "HIX5HD2 SATA PHY Driver" > + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Support for SATA PHY on Hisilicon hix5hd2 Soc. > + > +config PHY_HI6220_USB > + tristate "hi6220 USB PHY support" > + depends on (ARCH_HISI && ARM64) || COMPILE_TEST > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Enable this to support the HISILICON HI6220 USB PHY. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile > new file mode 100644 > index 0000000..6059ed8 > --- /dev/null > +++ b/drivers/phy/hisi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > diff --git a/drivers/phy/phy-hi6220-usb.c > b/drivers/phy/hisi/phy-hi6220-usb.c similarity index 100% > rename from drivers/phy/phy-hi6220-usb.c > rename to drivers/phy/hisi/phy-hi6220-usb.c > diff --git a/drivers/phy/phy-hix5hd2-sata.c > b/drivers/phy/hisi/phy-hix5hd2-sata.c similarity index 100% > rename from drivers/phy/phy-hix5hd2-sata.c > rename to drivers/phy/hisi/phy-hix5hd2-sata.c > diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig > new file mode 100644 > index 0000000..6c1576c > --- /dev/null > +++ b/drivers/phy/marvell/Kconfig > @@ -0,0 +1,50 @@ > +# > +# PHY drivers for Marvell platforms > +# > +config ARMADA375_USBCLUSTER_PHY > + def_bool y > + depends on MACH_ARMADA_375 || COMPILE_TEST > + depends on OF && HAS_IOMEM > + select GENERIC_PHY > + > +config PHY_BERLIN_USB > + tristate "Marvell Berlin USB PHY Driver" > + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the USB PHY on Marvell Berlin SoCs. > + > +config PHY_BERLIN_SATA > + tristate "Marvell Berlin SATA PHY driver" > + depends on ARCH_BERLIN && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the SATA PHY on Marvell Berlin SoCs. > + > +config PHY_MVEBU_SATA > + def_bool y > + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > + depends on OF > + select GENERIC_PHY > + > +config PHY_PXA_28NM_HSIC > + tristate "Marvell USB HSIC 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB HSIC PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell ehci driver. > + > + To compile this driver as a module, choose M here. > + > +config PHY_PXA_28NM_USB2 > + tristate "Marvell USB 2.0 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB 2.0 PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell udc/ehci/otg driver. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile > new file mode 100644 > index 0000000..f4fa255 > --- /dev/null > +++ b/drivers/phy/marvell/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > diff --git a/drivers/phy/phy-armada375-usb2.c > b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100% > rename from drivers/phy/phy-armada375-usb2.c > rename to drivers/phy/marvell/phy-armada375-usb2.c > diff --git a/drivers/phy/phy-berlin-sata.c > b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100% > rename from drivers/phy/phy-berlin-sata.c > rename to drivers/phy/marvell/phy-berlin-sata.c > diff --git a/drivers/phy/phy-berlin-usb.c > b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100% > rename from drivers/phy/phy-berlin-usb.c > rename to drivers/phy/marvell/phy-berlin-usb.c > diff --git a/drivers/phy/phy-mvebu-sata.c > b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100% > rename from drivers/phy/phy-mvebu-sata.c > rename to drivers/phy/marvell/phy-mvebu-sata.c > diff --git a/drivers/phy/phy-pxa-28nm-hsic.c > b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-hsic.c > rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c > diff --git a/drivers/phy/phy-pxa-28nm-usb2.c > b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-usb2.c > rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c > diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig > new file mode 100644 > index 0000000..9718d01 > --- /dev/null > +++ b/drivers/phy/qcom/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Qualcomm platforms > +# > +config PHY_QCOM_APQ8064_SATA > + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_IPQ806X_SATA > + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_UFS > + tristate "Qualcomm UFS PHY driver" > + depends on OF && ARCH_QCOM > + select GENERIC_PHY > + help > + Support for UFS PHY on QCOM chipsets. > diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile > new file mode 100644 > index 0000000..2db3e77 > --- /dev/null > +++ b/drivers/phy/qcom/Makefile > @@ -0,0 +1,5 @@ > +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \ > + += phy-qcom-ufs-qmp-20nm.o \ > + += phy-qcom-ufs-qmp-14nm.o > diff --git a/drivers/phy/phy-qcom-apq8064-sata.c > b/drivers/phy/qcom/phy-qcom-apq8064-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-apq8064-sata.c > rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c > diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c > b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-ipq806x-sata.c > rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c > diff --git a/drivers/phy/phy-qcom-ufs-i.h > b/drivers/phy/qcom/phy-qcom-ufs-i.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-i.h > rename to drivers/phy/qcom/phy-qcom-ufs-i.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h > diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c > similarity index 100% > rename from drivers/phy/phy-qcom-ufs.c > rename to drivers/phy/qcom/phy-qcom-ufs.c > diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig > new file mode 100644 > index 0000000..169b5e2 > --- /dev/null > +++ b/drivers/phy/rcar/Kconfig > @@ -0,0 +1,16 @@ > +# > +# PHY drivers for Renesas's r-car platforms > +# > +config PHY_RCAR_GEN2 > + tristate "Renesas R-Car generation 2 USB PHY driver" > + depends on ARCH_SHMOBILE > + depends on GENERIC_PHY > + help > + Support for USB PHY found on Renesas R-Car generation 2 SoCs. > + > +config PHY_RCAR_GEN3_USB2 > + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > + depends on OF && ARCH_SHMOBILE > + select GENERIC_PHY > + help > + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile > new file mode 100644 > index 0000000..695241a > --- /dev/null > +++ b/drivers/phy/rcar/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > diff --git a/drivers/phy/phy-rcar-gen2.c > b/drivers/phy/rcar/phy-rcar-gen2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen2.c > rename to drivers/phy/rcar/phy-rcar-gen2.c > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c > b/drivers/phy/rcar/phy-rcar-gen3-usb2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen3-usb2.c > rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c > diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig > new file mode 100644 > index 0000000..c575d1e > --- /dev/null > +++ b/drivers/phy/rockchip/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Rockchip platforms > +# > +config PHY_ROCKCHIP_USB > + tristate "Rockchip USB2 PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip USB 2.0 PHY. > + > +config PHY_ROCKCHIP_EMMC > + tristate "Rockchip EMMC PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip EMMC PHY. > + > +config PHY_ROCKCHIP_DP > + tristate "Rockchip Display Port PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip Display Port PHY. > diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile > new file mode 100644 > index 0000000..c15acc1 > --- /dev/null > +++ b/drivers/phy/rockchip/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > diff --git a/drivers/phy/phy-rockchip-dp.c > b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100% > rename from drivers/phy/phy-rockchip-dp.c > rename to drivers/phy/rockchip/phy-rockchip-dp.c > diff --git a/drivers/phy/phy-rockchip-emmc.c > b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100% > rename from drivers/phy/phy-rockchip-emmc.c > rename to drivers/phy/rockchip/phy-rockchip-emmc.c > diff --git a/drivers/phy/phy-rockchip-usb.c > b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100% > rename from drivers/phy/phy-rockchip-usb.c > rename to drivers/phy/rockchip/phy-rockchip-usb.c > diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig > new file mode 100644 > index 0000000..80bdea7 > --- /dev/null > +++ b/drivers/phy/samsung/Kconfig > @@ -0,0 +1,87 @@ > +# > +# PHY drivers for Samsung platforms > +# > +config PHY_SAMSUNG_USB2 > + tristate "Samsung USB 2.0 PHY driver" > + depends on HAS_IOMEM > + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > + select GENERIC_PHY > + select MFD_SYSCON > + default ARCH_EXYNOS > + help > + Enable this to support the Samsung USB 2.0 PHY driver for Samsung > + SoCs. This driver provides the interface for USB 2.0 PHY. Support > + for particular PHYs will be enabled based on the SoC type in addition > + to this driver. > + > +config PHY_S5PV210_USB2 > + bool "Support for S5PV210" > + depends on PHY_SAMSUNG_USB2 > + depends on ARCH_S5PV210 > + help > + Enable USB PHY support for S5PV210. This option requires that Samsung > + USB 2.0 PHY driver is enabled and means that support for this > + particular SoC is compiled in the driver. In case of S5PV210 two phys > + are available - device and host. > + > +config PHY_EXYNOS4210_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default CPU_EXYNOS4210 > + > +config PHY_EXYNOS4X12_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > + > +config PHY_EXYNOS5250_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS5250 || SOC_EXYNOS5420 > + > +config PHY_EXYNOS5_USBDRD > + tristate "Exynos5 SoC series USB DRD PHY driver" > + depends on ARCH_EXYNOS && OF > + depends on HAS_IOMEM > + depends on USB_DWC3_EXYNOS > + select GENERIC_PHY > + select MFD_SYSCON > + default y > + help > + Enable USB DRD PHY support for Exynos 5 SoC series. > + This driver provides PHY interface for USB 3.0 DRD controller > + present on Exynos5 SoC series. > + > +config PHY_EXYNOS_DP_VIDEO > + tristate "EXYNOS SoC series Display Port PHY driver" > + depends on OF > + depends on ARCH_EXYNOS || COMPILE_TEST > + default ARCH_EXYNOS > + select GENERIC_PHY > + help > + Support for Display Port PHY found on Samsung EXYNOS SoCs. > + > +config PHY_EXYNOS_MIPI_VIDEO > + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > + depends on HAS_IOMEM > + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > + select GENERIC_PHY > + default y if ARCH_S5PV210 || ARCH_EXYNOS > + help > + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > + and EXYNOS SoCs. > + > +config PHY_EXYNOS5250_SATA > + tristate "Exynos5250 Sata SerDes/PHY driver" > + depends on SOC_EXYNOS5250 > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + select I2C > + select I2C_S3C2410 > + select MFD_SYSCON > + help > + Enable this to support SATA SerDes/Phy found on Samsung's > + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > + port to accept one SATA device. > diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile > new file mode 100644 > index 0000000..585dbd7 > --- /dev/null > +++ b/drivers/phy/samsung/Makefile > @@ -0,0 +1,10 @@ > +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > +phy-exynos-usb2-y += phy-samsung-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > diff --git a/drivers/phy/phy-exynos-dp-video.c > b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100% > rename from drivers/phy/phy-exynos-dp-video.c > rename to drivers/phy/samsung/phy-exynos-dp-video.c > diff --git a/drivers/phy/phy-exynos-mipi-video.c > b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100% > rename from drivers/phy/phy-exynos-mipi-video.c > rename to drivers/phy/samsung/phy-exynos-mipi-video.c > diff --git a/drivers/phy/phy-exynos4210-usb2.c > b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4210-usb2.c > rename to drivers/phy/samsung/phy-exynos4210-usb2.c > diff --git a/drivers/phy/phy-exynos4x12-usb2.c > b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4x12-usb2.c > rename to drivers/phy/samsung/phy-exynos4x12-usb2.c > diff --git a/drivers/phy/phy-exynos5-usbdrd.c > b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100% > rename from drivers/phy/phy-exynos5-usbdrd.c > rename to drivers/phy/samsung/phy-exynos5-usbdrd.c > diff --git a/drivers/phy/phy-exynos5250-sata.c > b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100% > rename from drivers/phy/phy-exynos5250-sata.c > rename to drivers/phy/samsung/phy-exynos5250-sata.c > diff --git a/drivers/phy/phy-exynos5250-usb2.c > b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos5250-usb2.c > rename to drivers/phy/samsung/phy-exynos5250-usb2.c > diff --git a/drivers/phy/phy-s5pv210-usb2.c > b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100% > rename from drivers/phy/phy-s5pv210-usb2.c > rename to drivers/phy/samsung/phy-s5pv210-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.c > b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100% > rename from drivers/phy/phy-samsung-usb2.c > rename to drivers/phy/samsung/phy-samsung-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.h > b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100% > rename from drivers/phy/phy-samsung-usb2.h > rename to drivers/phy/samsung/phy-samsung-usb2.h > diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig > new file mode 100644 > index 0000000..651b2bf > --- /dev/null > +++ b/drivers/phy/st/Kconfig > @@ -0,0 +1,51 @@ > +# > +# PHY drivers for ST Micro platforms > +# > +config PHY_MIPHY28LP > + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > + that is part of STMicroelectronics STiH407 SoC. > + > +config PHY_MIPHY365X > + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > + depends on ARCH_STI > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE) > + that is part of STMicroelectronics STiH41x SoC series. > + > +config PHY_ST_SPEAR1310_MIPHY > + tristate "ST SPEAR1310-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1310 || COMPILE_TEST > + help > + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > + > +config PHY_ST_SPEAR1340_MIPHY > + tristate "ST SPEAR1340-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1340 || COMPILE_TEST > + help > + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > + > +config PHY_STIH407_USB > + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > + depends on RESET_CONTROLLER > + depends on ARCH_STI || COMPILE_TEST > + select GENERIC_PHY > + help > + Enable this support to enable the picoPHY device used by USB2 > + and USB3 controllers on STMicroelectronics STiH407 SoC families. > + > +config PHY_STIH41X_USB > + tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the USB transceiver that is part of > + STMicroelectronics STiH41x SoC series. > diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile > new file mode 100644 > index 0000000..907561b > --- /dev/null > +++ b/drivers/phy/st/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c > similarity index 100% > rename from drivers/phy/phy-miphy28lp.c > rename to drivers/phy/st/phy-miphy28lp.c > diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c > similarity index 100% > rename from drivers/phy/phy-miphy365x.c > rename to drivers/phy/st/phy-miphy365x.c > diff --git a/drivers/phy/phy-spear1310-miphy.c > b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1310-miphy.c > rename to drivers/phy/st/phy-spear1310-miphy.c > diff --git a/drivers/phy/phy-spear1340-miphy.c > b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1340-miphy.c > rename to drivers/phy/st/phy-spear1340-miphy.c > diff --git a/drivers/phy/phy-stih407-usb.c > b/drivers/phy/st/phy-stih407-usb.c similarity index 100% > rename from drivers/phy/phy-stih407-usb.c > rename to drivers/phy/st/phy-stih407-usb.c > diff --git a/drivers/phy/phy-stih41x-usb.c > b/drivers/phy/st/phy-stih41x-usb.c similarity index 100% > rename from drivers/phy/phy-stih41x-usb.c > rename to drivers/phy/st/phy-stih41x-usb.c > diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig > new file mode 100644 > index 0000000..eb06427 > --- /dev/null > +++ b/drivers/phy/sunxi/Kconfig > @@ -0,0 +1,28 @@ > +# > +# PHY drivers for Allwinner's sunxi platforms > +# > +config PHY_SUN4I_USB > + tristate "Allwinner sunxi SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on EXTCON > + depends on POWER_SUPPLY > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sunxi SoCs. > + > + This driver controls the entire USB PHY block, both the USB OTG > + parts, as well as the 2 regular USB 2 host PHYs. > + > +config PHY_SUN9I_USB > + tristate "Allwinner sun9i SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on USB_COMMON > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sun9i SoCs. > + > + This driver controls each individual USB 2 host PHY. > diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile > new file mode 100644 > index 0000000..8605529c > --- /dev/null > +++ b/drivers/phy/sunxi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > diff --git a/drivers/phy/phy-sun4i-usb.c > b/drivers/phy/sunxi/phy-sun4i-usb.c similarity index 100% > rename from drivers/phy/phy-sun4i-usb.c > rename to drivers/phy/sunxi/phy-sun4i-usb.c > diff --git a/drivers/phy/phy-sun9i-usb.c > b/drivers/phy/sunxi/phy-sun9i-usb.c similarity index 100% > rename from drivers/phy/phy-sun9i-usb.c > rename to drivers/phy/sunxi/phy-sun9i-usb.c > diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig > new file mode 100644 > index 0000000..1e3e307 > --- /dev/null > +++ b/drivers/phy/ti/Kconfig > @@ -0,0 +1,67 @@ > +# > +# PHY drivers for TI platforms > +# > +config PHY_DM816X_USB > + tristate "TI dm816x USB PHY driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this for dm816x USB to work. > + > +config OMAP_CONTROL_PHY > + tristate "OMAP CONTROL PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + help > + Enable this to add support for the PHY part present in the control > + module. This driver has API to power on the USB2 PHY and to write to > + the mailbox. The mailbox is present only in omap4 and the register to > + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > + additional register to power on USB3 PHY/SATA PHY/PCIE PHY > + (PIPE3 PHY). > + > +config OMAP_USB2 > + tristate "OMAP USB2 PHY Driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the transceiver that is part of SOC. This > + driver takes care of all the PHY functionality apart from comparator. > + The USB OTG controller communicates with the comparator using this > + driver. > + > +config TI_PIPE3 > + tristate "TI PIPE3 PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + select GENERIC_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the PIPE3 PHY that is part of TI SOCs. This > + driver takes care of all the PHY functionality apart from comparator. > + This driver interacts with the "OMAP Control PHY Driver" to power > + on/off the PHY. > + > +config PHY_TUSB1210 > + tristate "TI TUSB1210 ULPI PHY module" > + depends on USB_ULPI_BUS > + select GENERIC_PHY > + help > + Support for TI TUSB1210 USB ULPI PHY. > + > +config TWL4030_USB > + tristate "TWL4030 USB Transceiver Driver" > + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this to support the USB OTG transceiver on TWL4030 > + family chips (including the TWL5030 and TPS659x0 devices). > + This transceiver supports high and full speed devices plus, > + in host mode, low speed. > diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile > new file mode 100644 > index 0000000..2d16f77 > --- /dev/null > +++ b/drivers/phy/ti/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > diff --git a/drivers/phy/phy-dm816x-usb.c > b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100% > rename from drivers/phy/phy-dm816x-usb.c > rename to drivers/phy/ti/phy-dm816x-usb.c > diff --git a/drivers/phy/phy-omap-control.c > b/drivers/phy/ti/phy-omap-control.c similarity index 100% > rename from drivers/phy/phy-omap-control.c > rename to drivers/phy/ti/phy-omap-control.c > diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c > similarity index 100% > rename from drivers/phy/phy-omap-usb2.c > rename to drivers/phy/ti/phy-omap-usb2.c > diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c > similarity index 100% > rename from drivers/phy/phy-ti-pipe3.c > rename to drivers/phy/ti/phy-ti-pipe3.c > diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c > similarity index 100% > rename from drivers/phy/phy-tusb1210.c > rename to drivers/phy/ti/phy-tusb1210.c > diff --git a/drivers/phy/phy-twl4030-usb.c > b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100% > rename from drivers/phy/phy-twl4030-usb.c > rename to drivers/phy/ti/phy-twl4030-usb.c > diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h > similarity index 100% > rename from drivers/phy/ulpi_phy.h > rename to drivers/phy/ti/ulpi_phy.h