From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Tobiasz 'dotnokato' Jarczyk <dotnokato@prokonto.pl>
Cc: linux-pm@vger.kernel.org, 1175504@bugs.launchpad.net
Subject: Re: [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure
Date: Tue, 13 Aug 2013 15:32:06 +0200 [thread overview]
Message-ID: <2413831.lgLFglVszz@vostro.rjw.lan> (raw)
In-Reply-To: <520A2358.6090804@prokonto.pl>
On Tuesday, August 13, 2013 02:15:20 PM Tobiasz 'dotnokato' Jarczyk wrote:
> [1.] One line summary of the problem:
> [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure
As it happens I have that machine and suspend/resume works on it for me
with 3.10.y at least.
Care to test a more recent kernel?
Rafael
> [2.] Full description of the problem/report:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1175504
>
> Laptop fails to suspend to RAM after being waken up from such a suspend
> (always hangs during second suspend).
>
> To reproduce on my laptop HP Compaq nx6325 EY349EA#AKD:
> 1. Suspend to RAM.
> 2. Wake up from suspend.
> 3. Suspend to RAM again.
> 4. During this suspend computer hangs - monitor is blank, power light is
> on, processor becomes very hot so the cooler is on full speed. At this
> point I have to hard reset it.
>
>
> ProblemType: KernelOops
> DistroRelease: Ubuntu 13.04
> Package: linux-image-3.8.0-19-generic 3.8.0-19.29
> ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
> Uname: Linux 3.8.0-19-generic x86_64
> Annotation: This occured during a previous suspend and prevented it from
> resuming properly.
> ApportVersion: 2.9.2-0ubuntu8
> Architecture: amd64
> AudioDevicesInUse:
> USER PID ACCESS COMMAND
> /dev/snd/controlC0: dotnokato 1756 F.... pulseaudio
> Date: Thu May 2 10:11:29 2013
> ExecutablePath: /usr/share/apport/apportcheckresume
> Failure: suspend/resume
> HibernationDevice: RESUME=UUID=ce4acd9b-ecba-4931-baa2-0c2d6409dbf6
> InstallationDate: Installed on 2012-10-06 (207 days ago)
> InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta amd64 (20120926)
> InterpreterPath: /usr/bin/python3.3
> Lsusb:
> Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint
> Sensor
> Bus 003 Device 003: ID 04b4:0033 Cypress Semiconductor Corp. Mouse
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> MachineType: Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)
> MarkForUpload: True
> PccardctlIdent:
> Socket 0:
> no product info available
> PccardctlStatus:
> Socket 0:
> no card
> ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
> ProcEnviron:
> TERM=linux
> PATH=(custom, no user)
> ProcFB: 0 radeondrmfb
> ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic
> root=UUID=4f0c1391-e243-4e37-aaab-52625df3e3bd ro quiet splash vt.handoff=7
> PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
> PulseAudio daemon running, or not running as session daemon.
> RelatedPackageVersions:
> linux-restricted-modules-3.8.0-19-generic N/A
> linux-backports-modules-3.8.0-19-generic N/A
> linux-firmware 1.106
> SourcePackage: linux
> Title: [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume
> failure
> UpgradeStatus: Upgraded to raring on 2013-03-09 (53 days ago)
> UserGroups:
>
> dmi.bios.date: 05/08/2007
> dmi.bios.vendor: Hewlett-Packard
> dmi.bios.version: 68TT2 Ver. F.07
> dmi.board.name: 30B0
> dmi.board.vendor: Hewlett-Packard
> dmi.board.version: KBC Version 40.15
> dmi.chassis.asset.tag: CNU7110B09
> dmi.chassis.type: 10
> dmi.chassis.vendor: Hewlett-Packard
> dmi.modalias:
> dmi:bvnHewlett-Packard:bvr68TT2Ver.F.07:bd05/08/2007:svnHewlett-Packard:pnHPCompaqnx6325(EY349EA#AKD):pvrF.07:rvnHewlett-Packard:rn30B0:rvrKBCVersion40.15:cvnHewlett-Packard:ct10:cvr:
> dmi.product.name: HP Compaq nx6325 (EY349EA#AKD)
> dmi.product.version: F.07
> dmi.sys.vendor: Hewlett-Packard
>
> [3.] Keywords (i.e., modules, networking, kernel):
>
> [4.] Kernel version (from /proc/version):
> $ cat /proc/version
> Linux version 3.11.0-031100rc5-generic (apw@gomeisa) (gcc version 4.6.3
> (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201308112135 SMP Mon Aug 12 01:35:49
> UTC 2013
>
> [5.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt)
>
> [6.] A small shell script or example program which triggers the problem
> (if possible)
>
> [7.] Environment
> $ lsb_release -rd
> Description: Ubuntu Saucy Salamander (development branch)
> Release: 13.10
>
> [7.1.] Software (add the output of the ver_linux script here)
> $ sh ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux none 3.11.0-031100rc5-generic #201308112135 SMP Mon Aug 12
> 01:35:49 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
>
> Gnu C 4.8
> Gnu make 3.81
> binutils 2.23.52.20130727
> util-linux 2.20.1
> mount support
> module-init-tools 9
> e2fsprogs 1.42.8
> pcmciautils 018
> PPP 2.4.5
> Linux C Library 2.17
> Dynamic linker (ldd) 2.17
> Procps 3.3.3
> Net-tools 1.60
> Kbd 1.15.5
> Sh-utils 8.20
> wireless-tools 30
> Modules Loaded rfcomm bnep bluetooth binfmt_misc hid_generic
> usbhid hid arc4 joydev hp_wmi radeon sparse_keymap ppdev
> snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep kvm_amd
> tpm_infineon snd_pcm b43 kvm snd_page_alloc ttm snd_seq_midi
> snd_seq_midi_event drm_kms_helper drm snd_rawmidi psmouse bcma snd_seq
> mac80211 snd_seq_device i2c_algo_bit pcmcia snd_timer serio_raw snd
> soundcore cfg80211 edac_core yenta_socket tifm_7xx1 pcmcia_rsrc
> edac_mce_amd tifm_core k8temp pcmcia_core i2c_piix4 shpchp ssb_hcd
> ohci_pci lm90 tpm_tis wmi mac_hid lp video parport_pc parport tg3
> sdhci_pci ptp pps_core sdhci pata_atiixp ssb pata_acpi sata_sil
>
> [7.2.] Processor information (from /proc/cpuinfo):
> $ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 72
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
> stepping : 2
> cpu MHz : 800.000
> cache size : 512 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 2
> apicid : 0
> initial apicid : 0
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
> rdtscp lm 3dnowext 3dnow rep_good nopl extd_apicid pni cx16 lahf_lm
> cmp_legacy svm extapic cr8_legacy
> bogomips : 1596.00
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp tm stc
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 72
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52
> stepping : 2
> cpu MHz : 800.000
> cache size : 512 KB
> physical id : 0
> siblings : 2
> core id : 1
> cpu cores : 2
> apicid : 1
> initial apicid : 1
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
> rdtscp lm 3dnowext 3dnow rep_good nopl extd_apicid pni cx16 lahf_lm
> cmp_legacy svm extapic cr8_legacy
> bogomips : 1596.00
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp tm stc
>
> [7.3.] Module information (from /proc/modules):
> $ cat /proc/modules
> rfcomm 74589 0 - Live 0x0000000000000000
> bnep 23966 2 - Live 0x0000000000000000
> bluetooth 391564 10 rfcomm,bnep, Live 0x0000000000000000
> binfmt_misc 17508 1 - Live 0x0000000000000000
> hid_generic 12548 0 - Live 0x0000000000000000
> usbhid 53329 0 - Live 0x0000000000000000
> hid 105557 2 hid_generic,usbhid, Live 0x0000000000000000
> arc4 12573 2 - Live 0x0000000000000000
> joydev 17613 0 - Live 0x0000000000000000
> hp_wmi 18202 0 - Live 0x0000000000000000
> radeon 1437967 3 - Live 0x0000000000000000
> sparse_keymap 13890 1 hp_wmi, Live 0x0000000000000000
> ppdev 17711 0 - Live 0x0000000000000000
> snd_hda_codec_analog 94101 1 - Live 0x0000000000000000
> snd_hda_intel 53038 2 - Live 0x0000000000000000
> snd_hda_codec 194727 2 snd_hda_codec_analog,snd_hda_intel, Live
> 0x0000000000000000
> snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000
> kvm_amd 60482 0 - Live 0x0000000000000000
> tpm_infineon 17410 0 - Live 0x0000000000000000
> snd_pcm 107140 2 snd_hda_intel,snd_hda_codec, Live 0x0000000000000000
> b43 397252 0 - Live 0x0000000000000000
> kvm 447883 1 kvm_amd, Live 0x0000000000000000
> snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000
> ttm 84705 1 radeon, Live 0x0000000000000000
> snd_seq_midi 13324 0 - Live 0x0000000000000000
> snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
> drm_kms_helper 53178 1 radeon, Live 0x0000000000000000
> drm 298236 5 radeon,ttm,drm_kms_helper, Live 0x0000000000000000
> snd_rawmidi 30416 1 snd_seq_midi, Live 0x0000000000000000
> psmouse 104015 0 - Live 0x0000000000000000
> bcma 47065 1 b43, Live 0x0000000000000000
> snd_seq 66061 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
> mac80211 619047 1 b43, Live 0x0000000000000000
> snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live
> 0x0000000000000000
> i2c_algo_bit 13564 1 radeon, Live 0x0000000000000000
> pcmcia 62188 0 - Live 0x0000000000000000
> snd_timer 29989 2 snd_pcm,snd_seq, Live 0x0000000000000000
> serio_raw 13413 0 - Live 0x0000000000000000
> snd 69657 14
> snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,Live
> 0x0000000000000000
> soundcore 12680 1 snd, Live 0x0000000000000000
> cfg80211 494624 2 b43,mac80211, Live 0x0000000000000000
> edac_core 62914 0 - Live 0x0000000000000000
> yenta_socket 45426 0 - Live 0x0000000000000000
> tifm_7xx1 13418 0 - Live 0x0000000000000000
> pcmcia_rsrc 18591 1 yenta_socket, Live 0x0000000000000000
> edac_mce_amd 22792 0 - Live 0x0000000000000000
> tifm_core 15624 1 tifm_7xx1, Live 0x0000000000000000
> k8temp 13064 0 - Live 0x0000000000000000
> pcmcia_core 23715 3 pcmcia,yenta_socket,pcmcia_rsrc, Live 0x0000000000000000
> i2c_piix4 22299 0 - Live 0x0000000000000000
> shpchp 37201 0 - Live 0x0000000000000000
> ssb_hcd 12909 0 - Live 0x0000000000000000
> ohci_pci 13561 0 - Live 0x0000000000000000
> lm90 20371 0 - Live 0x0000000000000000
> tpm_tis 19255 0 - Live 0x0000000000000000
> wmi 19256 1 hp_wmi, Live 0x0000000000000000
> mac_hid 13253 0 - Live 0x0000000000000000
> lp 17799 0 - Live 0x0000000000000000
> video 19574 0 - Live 0x0000000000000000
> parport_pc 32866 1 - Live 0x0000000000000000
> parport 42466 3 ppdev,lp,parport_pc, Live 0x0000000000000000
> tg3 170347 0 - Live 0x0000000000000000
> sdhci_pci 19116 0 - Live 0x0000000000000000
> ptp 18627 1 tg3, Live 0x0000000000000000
> pps_core 19027 1 ptp, Live 0x0000000000000000
> sdhci 43126 1 sdhci_pci, Live 0x0000000000000000
> pata_atiixp 13242 0 - Live 0x0000000000000000
> ssb 62890 2 b43,ssb_hcd, Live 0x0000000000000000
> pata_acpi 13038 0 - Live 0x0000000000000000
> sata_sil 13550 5 - Live 0x0000000000000000
>
> [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> $ cat /proc/ioports
> 0000-ffff : PCI Bus #00
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-0060 : keyboard
> 0062-0062 : EC data
> 0064-0064 : keyboard
> 0066-0066 : EC cmd
> 0070-0071 : rtc0
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:14.1
> 0170-0177 : pata_atiixp
> 01f0-01f7 : 0000:00:14.1
> 01f0-01f7 : pata_atiixp
> 0376-0376 : 0000:00:14.1
> 0376-0376 : pata_atiixp
> 0378-037a : parport0
> 037b-037f : parport0
> 03f6-03f6 : 0000:00:14.1
> 03f6-03f6 : pata_atiixp
> 040b-040b : pnp 00:09
> 04d0-04d1 : pnp 00:09
> 04d6-04d6 : pnp 00:09
> 0500-051f : pnp 00:09
> 0c00-0c01 : pnp 00:09
> 0c14-0c14 : pnp 00:09
> 0c50-0c51 : pnp 00:09
> 0c52-0c52 : pnp 00:09
> 0c6c-0c6c : pnp 00:09
> 0c6f-0c6f : pnp 00:09
> 0cd4-0cdf : pnp 00:09
> 0cf8-0cff : PCI conf1
> 1000-1fff : PCI Bus 0000:02
> 1000-10ff : PCI CardBus 0000:03
> 1400-14ff : PCI CardBus 0000:03
> 6000-6fff : PCI Bus 0000:01
> 6000-60ff : 0000:01:05.0
> 7018-701b : 0000:00:12.0
> 7020-702f : 0000:00:12.0
> 7040-704f : 0000:00:14.1
> 7040-704f : pata_atiixp
> 8000-8003 : ACPI PM1a_EVT_BLK
> 8004-8005 : ACPI PM1a_CNT_BLK
> 8008-800b : ACPI PM_TMR
> 8010-8015 : ACPI CPU throttle
> 8020-8027 : ACPI GPE0_BLK
> 8100-811f : pnp 00:0a
> 8100-8100 : ACPI PM2_CNT_BLK
> 8104-8107 : ACPI PM1b_EVT_BLK
> 8200-820f : 0000:00:14.0
> 8200-8207 : piix4_smbus
> 9000-9007 : 0000:00:12.0
> 9008-900b : 0000:00:12.0
> 9010-9017 : 0000:00:12.0
>
> $ cat /proc/iomem
> 00000000-00000fff : reserved
> 00001000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : PCI Bus #00
> 000c0000-000cffff : Video ROM
> 000e0000-000fffff : reserved
> 000f0000-000fffff : System ROM
> 00100000-77fcffff : System RAM
> 01000000-01738813 : Kernel code
> 01738814-01d0e73f : Kernel data
> 01e70000-01fe2fff : Kernel bss
> 77fd0000-77fe55ff : reserved
> 77fe5600-77ff7fff : ACPI Non-volatile Storage
> 77ff8000-7fffffff : reserved
> 78000000-7fffffff : pnp 00:0b
> 80000000-fcffffffff : PCI Bus #00
> 80000000-83ffffff : PCI Bus 0000:02
> 80000000-83ffffff : PCI CardBus 0000:03
> 84000000-8407ffff : 0000:00:12.0
> 84080000-84083fff : 0000:00:14.2
> 84080000-84083fff : ICH HD audio
> 88000000-8bffffff : PCI CardBus 0000:03
> c0000000-c7ffffff : PCI Bus 0000:01
> c0000000-c7ffffff : 0000:01:05.0
> c8000000-c80fffff : PCI Bus 0000:30
> c8000000-c8003fff : 0000:30:00.0
> c8000000-c8003fff : b43-pci-bridge
> d4000000-d42fffff : PCI Bus 0000:02
> d4000000-d400ffff : 0000:02:01.0
> d4000000-d400ffff : tg3
> d4010000-d4010fff : 0000:02:04.0
> d4010000-d4010fff : yenta_socket
> d4018000-d4018fff : 0000:02:04.2
> d4018000-d4018fff : tifm_7xx1
> d4019000-d40190ff : 0000:02:04.3
> d4019000-d40190ff : mmc0
> d4300000-d43fffff : PCI Bus 0000:01
> d4300000-d430ffff : 0000:01:05.0
> d4320000-d433ffff : 0000:01:05.0
> d4401000-d4401fff : 0000:00:13.0
> d4401000-d4401fff : ohci_hcd
> d4402000-d4402fff : 0000:00:13.1
> d4402000-d4402fff : ohci_hcd
> d4403000-d4403fff : 0000:00:13.2
> d4403000-d4403fff : ehci_hcd
> d4404000-d44043ff : 0000:00:14.0
> d4409000-d44091ff : 0000:00:12.0
> d4409000-d44091ff : sata_sil
> e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
> e0000000-efffffff : reserved
> e0000000-efffffff : pnp 00:0a
> fec00000-fec01fff : reserved
> fec00000-fec003ff : IOAPIC 0
> fee00000-fee00fff : Local APIC
> fee00000-fee00fff : pnp 00:0b
> ffbc0000-ffcbffff : reserved
> fff00000-ffffffff : reserved
> fff00000-ffffffff : pnp 00:09
>
> [7.5.] PCI information ('lspci -vvv' as root)
> $ sudo lspci -vvv
> 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI]
> RS480/RS482/RS485 Host Bridge (rev 10)
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 64
>
> 00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
> PCI Bridge [int gfx] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00006000-00006fff
> Memory behind bridge: d4300000-d43fffff
> Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30b0
>
> 00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
> PCI Express Port 3 (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c8000000-c80fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> ExtTag+ RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd Off, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet+ LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30b0
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: pcieport
>
> 00:12.0 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 9000 [size=8]
> Region 1: I/O ports at 9008 [size=4]
> Region 2: I/O ports at 9010 [size=8]
> Region 3: I/O ports at 7018 [size=4]
> Region 4: I/O ports at 7020 [size=16]
> Region 5: Memory at d4409000 (32-bit, non-prefetchable) [size=512]
> [virtual] Expansion ROM at 84000000 [disabled] [size=512K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Kernel driver in use: sata_sil
>
> 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> USB Host Controller (rev 80) (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at d4401000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci-pci
>
> 00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> USB Host Controller (rev 80) (prog-if 10 [OHCI])
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at d4402000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci-pci
>
> 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at d4403000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Bridge: PM- B3+
> Kernel driver in use: ehci-pci
>
> 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 SMBus
> Controller (rev 82)
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Region 0: I/O ports at 8200 [size=16]
> Region 1: Memory at d4404000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
> Kernel driver in use: piix4_smbus
>
> 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> IDE Controller (rev 80) (prog-if 82 [Master PriP])
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at 7040 [size=16]
> Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Kernel driver in use: pata_atiixp
>
> 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> High Definition Audio Controller (rev 01)
> Subsystem: Device 30b0:103c
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at 84080000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Kernel driver in use: snd_hda_intel
>
> 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> PCI-ISA Bridge (rev 80)
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
> PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
> I/O behind bridge: 00001000-00001fff
> Memory behind bridge: d4000000-d42fffff
> Prefetchable memory behind bridge: 80000000-83ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
> <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=8 IsocEn- LSEn+ ExtCTL- 64b+
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
> DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 1.02
> Link Frequency: 800MHz
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
> 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> ExtRS- UCnfE-
>
> 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
> [Athlon64/Opteron] Address Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
> [Athlon64/Opteron] DRAM Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k8temp
>
> 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc.
> [AMD/ATI] RS482M [Mobility Radeon Xpress 200] (prog-if 00 [VGA controller])
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B+ DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (2000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at 6000 [size=256]
> Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at d4320000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: radeon
>
> 02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
> Gigabit Ethernet (rev 03)
> Subsystem: Hewlett-Packard Company Device 30b0
> Physical Slot: 1
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=64K]
> Expansion ROM at <ignored> [disabled]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> pcilib: sysfs_read_vpd: read failed: Connection timed out
> Not readable
> Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
> Address: ffefbbddfffaa5f8 Data: 7bf7
> Kernel driver in use: tg3
>
> 02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 168, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at d4010000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
> Memory window 0: 80000000-83ffffff (prefetchable)
> Memory window 1: 88000000-8bffffff
> I/O window 0: 00001000-000010ff
> I/O window 1: 00001400-000014ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
>
> 02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia
> Card Reader (SD/MMC/MS/MS PRO/xD)
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at d4018000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: tifm_7xx1
>
> 02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard
> Compliant SD Host Controller
> Subsystem: Hewlett-Packard Company Device 30b0
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at d4019000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: sdhci-pci
>
> 30:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g
> (rev 01)
> Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
> L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency
> L0 <4us, L1 <64us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq-ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq-ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq-ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [13c v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> Kernel driver in use: b43-pci-bridge
>
> [7.6.] SCSI information (from /proc/scsi/scsi)
> $ cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: FUJITSU MHV2080B Rev: 892C
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
> Vendor: HL-DT-ST Model: DVDRAM GSA-T10N Rev: PC05
> Type: CD-ROM ANSI SCSI revision: 05
>
> [7.7.] Other information that might be relevant to the problem (please
> look in /proc and include all information that you think to be relevant):
> $ ls /proc
> 1 1214 140 1551 1660 19 2130 3 363 6 724 804
> 931 devices kallsyms mounts sys
> 10 1217 1400 1576 1665 1900 22 31 37 614 727 807
> 967 diskstats kcore mtrr sysrq-trigger
> 1000 1218 1404 1592 1675 1962 2248 32 443 680 7280 824
> 995 dma key-users net sysvipc
> 1069 1229 141 1612 1678 1970 23 33 469 6862 732 825
> 998 dri kmsg pagetypeinfo timer_list
> 1085 1233 142 1618 1679 1977 24 331 48 6977 7367 834
> acpi driver kpagecount partitions timer_stats
> 1088 1236 1420 1622 1680 1992 2401 333 4893 6980 7391 881
> asound execdomains kpageflags sched_debug tty
> 11 1237 1422 1630 1681 1994 25 334 5 7 7396 891
> buddyinfo fb latency_stats schedstat uptime
> 110 124 1426 1634 17 2 26 339 51 7007 7411 899
> bus filesystems loadavg scsi version
> 111 125 143 1636 1735 20 269 34 546 707 742 9
> cgroups fs locks self vmallocinfo
> 1153 13 1450 1640 1739 2011 27 349 547 71 745 901
> cmdline interrupts mdstat slabinfo vmstat
> 1159 1353 1457 1647 1770 208 274 35 548 7166 752 903
> consoles iomem meminfo softirqs zoneinfo
> 1162 1382 15 1652 18 21 28 36 553 72 799 904
> cpuinfo ioports misc stat
> 12 14 1534 1656 1843 2115 29 360 557 722 8 915
> crypto irq modules swaps
>
> [X.] Other notes, patches, fixes, workarounds:
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
next prev parent reply other threads:[~2013-08-13 13:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-13 12:15 [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure Tobiasz 'dotnokato' Jarczyk
2013-08-13 13:32 ` Rafael J. Wysocki [this message]
2013-08-13 13:29 ` Tobiasz 'dotnokato' Jarczyk
2013-08-13 22:42 ` Rafael J. Wysocki
2013-08-14 9:20 ` Tobiasz 'dotnokato' Jarczyk
2014-01-03 21:12 Tobiasz 'dotnokato' Jarczyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2413831.lgLFglVszz@vostro.rjw.lan \
--to=rjw@sisk.pl \
--cc=1175504@bugs.launchpad.net \
--cc=dotnokato@prokonto.pl \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.