All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Lamparter <chunkeey-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
To: John Youn <John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
Cc: Felipe Balbi <balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v2 2/4] usb: dwc2: Add binding for AHB burst
Date: Wed, 11 Jan 2017 19:22:34 +0100	[thread overview]
Message-ID: <2481217.sGcrUo83EX@debian64> (raw)
In-Reply-To: <f2b75acc-4773-e420-53ff-a77d0c9bce31-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>

On Tuesday, January 10, 2017 3:23:24 PM CET John Youn wrote:
> On 1/10/2017 3:03 PM, Christian Lamparter wrote:
> > On Tuesday, January 10, 2017 1:46:56 PM CET John Youn wrote:
> >> On 12/19/2016 6:49 AM, Christian Lamparter wrote:
> >>> (Lot's of old stuff, that doesn't matter anymore)
> > 
> > Hello John,
> >  
> >> This should be fixed against the latest dwc2 param rework series [1]
> >> which i hope to get queued for 4.11. If you can give it a test, that
> >> would be great.
> > 
> > oh Ok. I see you added it to
> > "[PATCH 16/21] usb: dwc2: Remove platform static params" [0].
> > Yes, I think this should work nicely. Thank you very much for
> > your time, even though it's just for like "one old board" :-).
> 
> No problem. Sorry for the delay getting the param stuff sorted.
> 
> > 
> > Do you have a public git tree with your patches that I can
> > clone/checkout?  If not, I'll take some time on the weekend
> > for this and write back on monday. But yeah, this should 
> > work.
> Yes check here on branch 'next'
> 
> https://github.com/synopsys-usb/linux.git
Ok thanks. I cloned it and built a new kernel for the thing. 

>From the (attached) bootlog:
GAHBCFG   @0xD1210008 : 0x0000002E
0x2E = Bit 5 | (Bit 3 | Bit 2 | Bit 1)
     = GAHBCFG_DMA_EN |
       (GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT)

I've attached an old 1GiB USB-Stick to the dwc2 managed port
and it does work as expected. The same goes for a usb-3.0 HDD
and a USB 2.0 11n WLAN stick. (All while the DWC SATA is
copying data).

Tested-by: Christian Lamparter <chunkeey-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>

Again, thank you for your work!

Regards,
Christian
---
These are the kernel messages.

dwc2 4bff80000.usbotg: mapped PA bff80000 to VA d1210000
dwc2 4bff80000.usbotg: registering common handler for irq35
dwc2 4bff80000.usbotg: Forcing mode to host
dwc2 4bff80000.usbotg: Core Release: 2.90a (snpsid=4f54290a)
dwc2 4bff80000.usbotg: Forcing mode to host
dwc2 4bff80000.usbotg: DWC OTG HCD INIT
dwc2 4bff80000.usbotg: hcfg=00000200
dwc2 4bff80000.usbotg: dwc2_core_init(ca890810)
dwc2 4bff80000.usbotg: HS UTMI+ PHY selected
dwc2 4bff80000.usbotg: Internal DMA Mode
dwc2 4bff80000.usbotg: host_dma:1 dma_desc_enable:0
dwc2 4bff80000.usbotg: Using Buffer DMA mode
dwc2 4bff80000.usbotg: Host Mode
dwc2 4bff80000.usbotg: DWC OTG Controller
dwc2 4bff80000.usbotg: new USB bus registered, assigned bus number 1
dwc2 4bff80000.usbotg: irq 35, io mem 0x00000000
dwc2 4bff80000.usbotg: DWC OTG HCD START
dwc2 4bff80000.usbotg: dwc2_core_host_init(ca890810)
dwc2 4bff80000.usbotg: Initializing HCFG.FSLSPClkSel to 00000000
dwc2 4bff80000.usbotg: initial grxfsiz=00000213
dwc2 4bff80000.usbotg: new grxfsiz=00000213
dwc2 4bff80000.usbotg: initial gnptxfsiz=01000213
dwc2 4bff80000.usbotg: new gnptxfsiz=01000213
dwc2 4bff80000.usbotg: initial hptxfsiz=01000313
dwc2 4bff80000.usbotg: new hptxfsiz=01000313
dwc2 4bff80000.usbotg: dwc2_core_host_init: Halt channel 0
dwc2 4bff80000.usbotg: dwc2_core_host_init: Halt channel 1
dwc2 4bff80000.usbotg: dwc2_core_host_init: Halt channel 2
dwc2 4bff80000.usbotg: dwc2_core_host_init: Halt channel 3
dwc2 4bff80000.usbotg: Init: Port Power? op_state=9
dwc2 4bff80000.usbotg: Init: Power Port (0)
dwc2 4bff80000.usbotg: dwc2_enable_host_interrupts()
dwc2 4bff80000.usbotg: DWC OTG HCD Has Root Hub
dwc2 4bff80000.usbotg: DWC OTG HCD EP RESET: bEndpointAddress=0x81
hub 1-0:1.0: USB hub found
dwc2 4bff80000.usbotg: GetHubDescriptor
hub 1-0:1.0: 1 port detected
dwc2 4bff80000.usbotg: GetHubStatus
dwc2 4bff80000.usbotg: SetPortFeature
dwc2 4bff80000.usbotg: 
dwc2 4bff80000.usbotg: ************************************************************
dwc2 4bff80000.usbotg: HCD State:
dwc2 4bff80000.usbotg:   Num channels: 4
dwc2 4bff80000.usbotg:   Channel 0:
dwc2 4bff80000.usbotg:     dev_addr: 0, ep_num: 0, ep_is_in: 0
dwc2 4bff80000.usbotg:     speed: 0
dwc2 4bff80000.usbotg:     ep_type: 0
dwc2 4bff80000.usbotg:     max_packet: 0
dwc2 4bff80000.usbotg:     data_pid_start: 0
dwc2 4bff80000.usbotg:     multi_count: 0
dwc2 4bff80000.usbotg:     xfer_started: 0
dwc2 4bff80000.usbotg:     xfer_buf:   (null)
dwc2 4bff80000.usbotg:     xfer_dma: 00000000
dwc2 4bff80000.usbotg:     xfer_len: 0
dwc2 4bff80000.usbotg:     xfer_count: 0
dwc2 4bff80000.usbotg:     halt_on_queue: 0
dwc2 4bff80000.usbotg:     halt_pending: 0
dwc2 4bff80000.usbotg:     halt_status: 0
dwc2 4bff80000.usbotg:     do_split: 0
dwc2 4bff80000.usbotg:     complete_split: 0
dwc2 4bff80000.usbotg:     hub_addr: 0
dwc2 4bff80000.usbotg:     hub_port: 0
dwc2 4bff80000.usbotg:     xact_pos: 0
dwc2 4bff80000.usbotg:     requests: 0
dwc2 4bff80000.usbotg:     qh:   (null)
dwc2 4bff80000.usbotg:   Channel 1:
dwc2 4bff80000.usbotg:     dev_addr: 0, ep_num: 0, ep_is_in: 0
dwc2 4bff80000.usbotg:     speed: 0
dwc2 4bff80000.usbotg:     ep_type: 0
dwc2 4bff80000.usbotg:     max_packet: 0
dwc2 4bff80000.usbotg:     data_pid_start: 0
dwc2 4bff80000.usbotg:     multi_count: 0
dwc2 4bff80000.usbotg:     xfer_started: 0
dwc2 4bff80000.usbotg:     xfer_buf:   (null)
dwc2 4bff80000.usbotg:     xfer_dma: 00000000
dwc2 4bff80000.usbotg:     xfer_len: 0
dwc2 4bff80000.usbotg:     xfer_count: 0
dwc2 4bff80000.usbotg:     halt_on_queue: 0
dwc2 4bff80000.usbotg:     halt_pending: 0
dwc2 4bff80000.usbotg:     halt_status: 0
dwc2 4bff80000.usbotg:     do_split: 0
dwc2 4bff80000.usbotg:     complete_split: 0
dwc2 4bff80000.usbotg:     hub_addr: 0
dwc2 4bff80000.usbotg:     hub_port: 0
dwc2 4bff80000.usbotg:     xact_pos: 0
dwc2 4bff80000.usbotg:     requests: 0
dwc2 4bff80000.usbotg:     qh:   (null)
dwc2 4bff80000.usbotg:   Channel 2:
dwc2 4bff80000.usbotg:     dev_addr: 0, ep_num: 0, ep_is_in: 0
dwc2 4bff80000.usbotg:     speed: 0
dwc2 4bff80000.usbotg:     ep_type: 0
dwc2 4bff80000.usbotg:     max_packet: 0
dwc2 4bff80000.usbotg:     data_pid_start: 0
dwc2 4bff80000.usbotg:     multi_count: 0
dwc2 4bff80000.usbotg:     xfer_started: 0
dwc2 4bff80000.usbotg:     xfer_buf:   (null)
dwc2 4bff80000.usbotg:     xfer_dma: 00000000
dwc2 4bff80000.usbotg:     xfer_len: 0
dwc2 4bff80000.usbotg:     xfer_count: 0
dwc2 4bff80000.usbotg:     halt_on_queue: 0
dwc2 4bff80000.usbotg:     halt_pending: 0
dwc2 4bff80000.usbotg:     halt_status: 0
dwc2 4bff80000.usbotg:     do_split: 0
dwc2 4bff80000.usbotg:     complete_split: 0
dwc2 4bff80000.usbotg:     hub_addr: 0
dwc2 4bff80000.usbotg:     hub_port: 0
dwc2 4bff80000.usbotg:     xact_pos: 0
dwc2 4bff80000.usbotg:     requests: 0
dwc2 4bff80000.usbotg:     qh:   (null)
dwc2 4bff80000.usbotg:   Channel 3:
dwc2 4bff80000.usbotg:     dev_addr: 0, ep_num: 0, ep_is_in: 0
dwc2 4bff80000.usbotg:     speed: 0
dwc2 4bff80000.usbotg:     ep_type: 0
dwc2 4bff80000.usbotg:     max_packet: 0
dwc2 4bff80000.usbotg:     data_pid_start: 0
dwc2 4bff80000.usbotg:     multi_count: 0
dwc2 4bff80000.usbotg:     xfer_started: 0
dwc2 4bff80000.usbotg:     xfer_buf:   (null)
dwc2 4bff80000.usbotg:     xfer_dma: 00000000
dwc2 4bff80000.usbotg:     xfer_len: 0
dwc2 4bff80000.usbotg:     xfer_count: 0
dwc2 4bff80000.usbotg:     halt_on_queue: 0
dwc2 4bff80000.usbotg:     halt_pending: 0
dwc2 4bff80000.usbotg:     halt_status: 0
dwc2 4bff80000.usbotg:     do_split: 0
dwc2 4bff80000.usbotg:     complete_split: 0
dwc2 4bff80000.usbotg:     hub_addr: 0
dwc2 4bff80000.usbotg:     hub_port: 0
dwc2 4bff80000.usbotg:     xact_pos: 0
dwc2 4bff80000.usbotg:     requests: 0
dwc2 4bff80000.usbotg:     qh:   (null)
dwc2 4bff80000.usbotg:   non_periodic_channels: 0
dwc2 4bff80000.usbotg:   periodic_channels: 0
dwc2 4bff80000.usbotg:   periodic_usecs: 0
dwc2 4bff80000.usbotg:   NP Tx Req Queue Space Avail: 8
dwc2 4bff80000.usbotg:   NP Tx FIFO Space Avail: 256
dwc2 4bff80000.usbotg:   P Tx Req Queue Space Avail: 8
dwc2 4bff80000.usbotg:   P Tx FIFO Space Avail: 256
dwc2 4bff80000.usbotg: Core Global Registers
dwc2 4bff80000.usbotg: GOTGCTL   @0xD1210000 : 0x001E0001
dwc2 4bff80000.usbotg: GOTGINT   @0xD1210004 : 0x00080000
dwc2 4bff80000.usbotg: GAHBCFG   @0xD1210008 : 0x0000002E
dwc2 4bff80000.usbotg: GUSBCFG   @0xD121000C : 0x20001708
dwc2 4bff80000.usbotg: GRSTCTL   @0xD1210010 : 0x80000000
dwc2 4bff80000.usbotg: GINTSTS   @0xD1210014 : 0x05000025
dwc2 4bff80000.usbotg: GINTMSK   @0xD1210018 : 0xF3000806
dwc2 4bff80000.usbotg: GRXSTSR   @0xD121001C : 0x025B34D8
dwc2 4bff80000.usbotg: GRXFSIZ   @0xD1210024 : 0x00000213
dwc2 4bff80000.usbotg: GNPTXFSIZ         @0xD1210028 : 0x01000213
dwc2 4bff80000.usbotg: GNPTXSTS  @0xD121002C : 0x00080100
dwc2 4bff80000.usbotg: GI2CCTL   @0xD1210030 : 0x00000000
dwc2 4bff80000.usbotg: GPVNDCTL  @0xD1210034 : 0x00000000
dwc2 4bff80000.usbotg: GGPIO     @0xD1210038 : 0x00000000
dwc2 4bff80000.usbotg: GUID      @0xD121003C : 0x00000000
dwc2 4bff80000.usbotg: GSNPSID   @0xD1210040 : 0x4F54290A
dwc2 4bff80000.usbotg: GHWCFG1   @0xD1210044 : 0x00000000
dwc2 4bff80000.usbotg: GHWCFG2   @0xD1210048 : 0x228CC850
dwc2 4bff80000.usbotg: GHWCFG3   @0xD121004C : 0x07FA0CE8
dwc2 4bff80000.usbotg: GHWCFG4   @0xD1210050 : 0x09F04011
dwc2 4bff80000.usbotg: GLPMCFG   @0xD1210054 : 0x00000000
dwc2 4bff80000.usbotg: GPWRDN    @0xD1210058 : 0x00000000
dwc2 4bff80000.usbotg: GDFIFOCFG         @0xD121005C : 0x00000000
dwc2 4bff80000.usbotg: HPTXFSIZ  @0xD1210100 : 0x01000313
dwc2 4bff80000.usbotg: PCGCTL    @0xD1210E00 : 0x00000000
dwc2 4bff80000.usbotg: Host Global Registers
dwc2 4bff80000.usbotg: HCFG      @0xD1210400 : 0x00000200
dwc2 4bff80000.usbotg: HFIR      @0xD1210404 : 0x0000EA60
dwc2 4bff80000.usbotg: HFNUM     @0xD1210408 : 0xEA603FFF
dwc2 4bff80000.usbotg: HPTXSTS   @0xD1210410 : 0x00080100
dwc2 4bff80000.usbotg: HAINT     @0xD1210414 : 0x00000000
dwc2 4bff80000.usbotg: HAINTMSK  @0xD1210418 : 0x00000000
dwc2 4bff80000.usbotg: HPRT0     @0xD1210440 : 0x00021403
dwc2 4bff80000.usbotg: Host Channel 0 Specific Registers
dwc2 4bff80000.usbotg: HCCHAR    @0xD1210500 : 0x00000000
dwc2 4bff80000.usbotg: HCSPLT    @0xD1210504 : 0x00000000
dwc2 4bff80000.usbotg: HCINT     @0xD1210508 : 0x00000002
dwc2 4bff80000.usbotg: HCINTMSK  @0xD121050C : 0x00000000
dwc2 4bff80000.usbotg: HCTSIZ    @0xD1210510 : 0x00000000
dwc2 4bff80000.usbotg: HCDMA     @0xD1210514 : 0x8D289912
dwc2 4bff80000.usbotg: Host Channel 1 Specific Registers
dwc2 4bff80000.usbotg: HCCHAR    @0xD1210520 : 0x00000000
dwc2 4bff80000.usbotg: HCSPLT    @0xD1210524 : 0x00000000
dwc2 4bff80000.usbotg: HCINT     @0xD1210528 : 0x00000002
dwc2 4bff80000.usbotg: HCINTMSK  @0xD121052C : 0x00000000
dwc2 4bff80000.usbotg: HCTSIZ    @0xD1210530 : 0x00000000
dwc2 4bff80000.usbotg: HCDMA     @0xD1210534 : 0xBBC5AD7A
dwc2 4bff80000.usbotg: Host Channel 2 Specific Registers
dwc2 4bff80000.usbotg: HCCHAR    @0xD1210540 : 0x00000000
dwc2 4bff80000.usbotg: HCSPLT    @0xD1210544 : 0x00000000
dwc2 4bff80000.usbotg: HCINT     @0xD1210548 : 0x00000002
dwc2 4bff80000.usbotg: HCINTMSK  @0xD121054C : 0x00000000
dwc2 4bff80000.usbotg: HCTSIZ    @0xD1210550 : 0x00000000
dwc2 4bff80000.usbotg: HCDMA     @0xD1210554 : 0xC7D821B3
dwc2 4bff80000.usbotg: Host Channel 3 Specific Registers
dwc2 4bff80000.usbotg: HCCHAR    @0xD1210560 : 0x00000000
dwc2 4bff80000.usbotg: HCSPLT    @0xD1210564 : 0x00000000
dwc2 4bff80000.usbotg: HCINT     @0xD1210568 : 0x00000002
dwc2 4bff80000.usbotg: HCINTMSK  @0xD121056C : 0x00000000
dwc2 4bff80000.usbotg: HCTSIZ    @0xD1210570 : 0x00000000
dwc2 4bff80000.usbotg: HCDMA     @0xD1210574 : 0x7DEDDB55
dwc2 4bff80000.usbotg: ************************************************************
dwc2 4bff80000.usbotg: 
dwc2 4bff80000.usbotg: gintsts=05000025  gintmsk=f3000806
dwc2 4bff80000.usbotg: ++OTG Interrupt gotgint=80000 [a_host]
dwc2 4bff80000.usbotg:  ++OTG Interrupt: Debounce Done++
dwc2 4bff80000.usbotg: ClearPortFeature USB_PORT_FEAT_C_CONNECTION
root@lede:/tmp# dwc2 4bff80000.usbotg: SetPortFeature
dwc2 4bff80000.usbotg: SetPortFeature - USB_PORT_FEAT_RESET
dwc2 4bff80000.usbotg: In host mode, hprt0=00021501
dwc2 4bff80000.usbotg: gintsts=05000021  gintmsk=f3000806
dwc2 4bff80000.usbotg: ClearPortFeature USB_PORT_FEAT_C_RESET
usb 1-1: new high-speed USB device number 2 using dwc2
dwc2 4bff80000.usbotg: SetPortFeature
dwc2 4bff80000.usbotg: SetPortFeature - USB_PORT_FEAT_RESET
dwc2 4bff80000.usbotg: In host mode, hprt0=00001101
dwc2 4bff80000.usbotg: gintsts=05000029  gintmsk=f3000806
dwc2 4bff80000.usbotg: gintsts=05000029  gintmsk=f3000806
dwc2 4bff80000.usbotg: ClearPortFeature USB_PORT_FEAT_C_RESET
dwc2 4bff80000.usbotg: DWC OTG HCD EP DISABLE: bEndpointAddress=0x00, ep->hcpriv=ca80e6c0
dwc2 4bff80000.usbotg: DWC OTG HCD EP DISABLE: bEndpointAddress=0x00, ep->hcpriv=  (null)
dwc2 4bff80000.usbotg: DWC OTG HCD EP RESET: bEndpointAddress=0x00
dwc2 4bff80000.usbotg: DWC OTG HCD HUB STATUS DATA: Root port status changed
dwc2 4bff80000.usbotg:   port_connect_status_change: 0
dwc2 4bff80000.usbotg:   port_reset_change: 0
dwc2 4bff80000.usbotg:   port_enable_change: 1
dwc2 4bff80000.usbotg:   port_suspend_change: 0
dwc2 4bff80000.usbotg:   port_over_current_change: 0
dwc2 4bff80000.usbotg: DWC OTG HCD EP RESET: bEndpointAddress=0x81
dwc2 4bff80000.usbotg: DWC OTG HCD EP RESET: bEndpointAddress=0x02
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
dwc2 4bff80000.usbotg: ClearPortFeature USB_PORT_FEAT_C_ENABLE
scsi 2:0:0:0: Direct-Access              FlashPen Fancy   1100 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 1957888 512-byte logical blocks: (1.00 GB/956 MiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI removable disk
random: crng init done


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-01-11 18:22 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-16 23:47 [PATCH v2 0/4] usb: dwc2: Add AHB burst configuration John Youn
     [not found] ` <cover.1479339900.git.johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-11-16 23:47   ` [PATCH v2 2/4] usb: dwc2: Add binding for AHB burst John Youn
     [not found]     ` <7fa1c1c4d703c435d698cdf140c9d43163347f1d.1479339900.git.johnyoun-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-11-17 11:27       ` Felipe Balbi
     [not found]         ` <874m36tkgz.fsf-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-11-17 18:54           ` John Youn
2016-11-17 15:35       ` Stefan Wahren
     [not found]         ` <633e5a10-1ea0-48c7-a5b7-a5ff2625e759-eS4NqCHxEME@public.gmane.org>
2016-11-17 16:07           ` John Youn
2016-11-18 14:16           ` Rob Herring
2016-11-18 20:18             ` Christian Lamparter
2016-11-21 20:16               ` John Youn
     [not found]                 ` <e01e1b30-a399-94cc-33c9-625008b31d4b-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-11-21 21:10                   ` Christian Lamparter
2016-11-21 21:10                     ` Christian Lamparter
2016-11-22  3:32                     ` John Youn
2016-11-22  3:32                       ` John Youn
2016-11-22 20:51                       ` Christian Lamparter
2016-11-22 20:51                         ` Christian Lamparter
2016-11-22 21:46                         ` Rob Herring
2016-11-22 21:46                           ` Rob Herring
2016-11-29  3:32                         ` John Youn
2016-11-29  3:32                           ` John Youn
     [not found]                           ` <dab2e32a-1bd0-2aa5-5a7a-61f2201786b4-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-12-19 14:49                             ` Christian Lamparter
2017-01-10 21:46                               ` John Youn
     [not found]                                 ` <e8fa98c7-0dbc-7be7-be54-b2a9114bc289-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2017-01-10 23:01                                   ` Christian Lamparter
2017-01-10 23:23                                     ` John Youn
     [not found]                                       ` <f2b75acc-4773-e420-53ff-a77d0c9bce31-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2017-01-11 18:22                                         ` Christian Lamparter [this message]
2016-11-18 14:13       ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2481217.sGcrUo83EX@debian64 \
    --to=chunkeey-gm/ye1e23mwn+bqq9rbeug@public.gmane.org \
    --cc=John.Youn-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
    --cc=balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.