Re: [dpdk-dev] [PATCH v5 1/2] examples/ipsec-secgw: fix 1st pkt dropped for inline crypto

["Ananyev, Konstantin" <konstantin.ananyev@intel.com>]

Hi Bernard,
Few small comments below.
Konstantin

> Inline crypto installs a flow rule in the NIC. This flow
> rule must be installed before the first inbound packet is
> received.
> 
> The create_session() function installs the flow rule,
> create_session() has been refactored into create_inline_session()
> and create_lookaside_session(). The create_inline_session() function
> uses the socket_ctx data and is now called at initialisation in
> sa_add_rules().
> 
> The max_session_size() function has been added to calculate memory
> requirements.
> 
> The cryprodev_init() function has been refactored to drop calls to
> rte_mempool_create() and to drop calculation of memory requirements.
> 
> The main() function has been refactored to call max_session_size() and
> to call session_pool_init() and session_priv_pool_init() earlier.
> The ports are started now before adding a flow rule in main().
> The sa_init(), sp4_init(), sp6_init() and rt_init() functions are
> now called after the ports have been started.
> 
> The rte_ipsec_session_prepare() function is called in fill_ipsec_session()
> for inline which is called from the ipsec_sa_init() function.
> 
> Fixes: ec17993a145a ("examples/ipsec-secgw: support security offload")
> Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
> ---
>  examples/ipsec-secgw/ipsec-secgw.c   | 244 +++++++++++++++++------------------
>  examples/ipsec-secgw/ipsec.c         | 122 ++++++++++++------
>  examples/ipsec-secgw/ipsec.h         |   5 +-
>  examples/ipsec-secgw/ipsec_process.c |   9 +-
>  examples/ipsec-secgw/sa.c            |  46 +++++--
>  5 files changed, 245 insertions(+), 181 deletions(-)
> 
> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
> index 6c626fa..24876ba 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -1628,7 +1628,7 @@ cryptodevs_init(void)
>  	struct rte_cryptodev_config dev_conf;
>  	struct rte_cryptodev_qp_conf qp_conf;
>  	uint16_t idx, max_nb_qps, qp, i;
> -	int16_t cdev_id, port_id;
> +	int16_t cdev_id;
>  	struct rte_hash_parameters params = { 0 };
> 
>  	params.entries = CDEV_MAP_ENTRIES;
> @@ -1651,45 +1651,6 @@ cryptodevs_init(void)
> 
>  	printf("lcore/cryptodev/qp mappings:\n");
> 
> -	uint32_t max_sess_sz = 0, sess_sz;
> -	for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
> -		void *sec_ctx;
> -
> -		/* Get crypto priv session size */
> -		sess_sz = rte_cryptodev_sym_get_private_session_size(cdev_id);
> -		if (sess_sz > max_sess_sz)
> -			max_sess_sz = sess_sz;
> -
> -		/*
> -		 * If crypto device is security capable, need to check the
> -		 * size of security session as well.
> -		 */
> -
> -		/* Get security context of the crypto device */
> -		sec_ctx = rte_cryptodev_get_sec_ctx(cdev_id);
> -		if (sec_ctx == NULL)
> -			continue;
> -
> -		/* Get size of security session */
> -		sess_sz = rte_security_session_get_size(sec_ctx);
> -		if (sess_sz > max_sess_sz)
> -			max_sess_sz = sess_sz;
> -	}
> -	RTE_ETH_FOREACH_DEV(port_id) {
> -		void *sec_ctx;
> -
> -		if ((enabled_port_mask & (1 << port_id)) == 0)
> -			continue;
> -
> -		sec_ctx = rte_eth_dev_get_sec_ctx(port_id);
> -		if (sec_ctx == NULL)
> -			continue;
> -
> -		sess_sz = rte_security_session_get_size(sec_ctx);
> -		if (sess_sz > max_sess_sz)
> -			max_sess_sz = sess_sz;
> -	}
> -
>  	idx = 0;
>  	for (cdev_id = 0; cdev_id < rte_cryptodev_count(); cdev_id++) {
>  		struct rte_cryptodev_info cdev_info;
> @@ -1727,45 +1688,6 @@ cryptodevs_init(void)
>  				"Device does not support at least %u "
>  				"sessions", CDEV_MP_NB_OBJS);
> 
> -		if (!socket_ctx[dev_conf.socket_id].session_pool) {
> -			char mp_name[RTE_MEMPOOL_NAMESIZE];
> -			struct rte_mempool *sess_mp;
> -
> -			snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
> -					"sess_mp_%u", dev_conf.socket_id);
> -			sess_mp = rte_cryptodev_sym_session_pool_create(
> -					mp_name, CDEV_MP_NB_OBJS,
> -					0, CDEV_MP_CACHE_SZ, 0,
> -					dev_conf.socket_id);
> -			socket_ctx[dev_conf.socket_id].session_pool = sess_mp;
> -		}
> -
> -		if (!socket_ctx[dev_conf.socket_id].session_priv_pool) {
> -			char mp_name[RTE_MEMPOOL_NAMESIZE];
> -			struct rte_mempool *sess_mp;
> -
> -			snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
> -					"sess_mp_priv_%u", dev_conf.socket_id);
> -			sess_mp = rte_mempool_create(mp_name,
> -					CDEV_MP_NB_OBJS,
> -					max_sess_sz,
> -					CDEV_MP_CACHE_SZ,
> -					0, NULL, NULL, NULL,
> -					NULL, dev_conf.socket_id,
> -					0);
> -			socket_ctx[dev_conf.socket_id].session_priv_pool =
> -					sess_mp;
> -		}
> -
> -		if (!socket_ctx[dev_conf.socket_id].session_priv_pool ||
> -				!socket_ctx[dev_conf.socket_id].session_pool)
> -			rte_exit(EXIT_FAILURE,
> -				"Cannot create session pool on socket %d\n",
> -				dev_conf.socket_id);
> -		else
> -			printf("Allocated session pool on socket %d\n",
> -					dev_conf.socket_id);
> -
>  		if (rte_cryptodev_configure(cdev_id, &dev_conf))
>  			rte_panic("Failed to initialize cryptodev %u\n",
>  					cdev_id);
> @@ -1786,39 +1708,6 @@ cryptodevs_init(void)
>  					cdev_id);
>  	}
> 
> -	/* create session pools for eth devices that implement security */
> -	RTE_ETH_FOREACH_DEV(port_id) {
> -		if ((enabled_port_mask & (1 << port_id)) &&
> -				rte_eth_dev_get_sec_ctx(port_id)) {
> -			int socket_id = rte_eth_dev_socket_id(port_id);
> -
> -			if (!socket_ctx[socket_id].session_priv_pool) {
> -				char mp_name[RTE_MEMPOOL_NAMESIZE];
> -				struct rte_mempool *sess_mp;
> -
> -				snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
> -						"sess_mp_%u", socket_id);
> -				sess_mp = rte_mempool_create(mp_name,
> -						(CDEV_MP_NB_OBJS * 2),
> -						max_sess_sz,
> -						CDEV_MP_CACHE_SZ,
> -						0, NULL, NULL, NULL,
> -						NULL, socket_id,
> -						0);
> -				if (sess_mp == NULL)
> -					rte_exit(EXIT_FAILURE,
> -						"Cannot create session pool "
> -						"on socket %d\n", socket_id);
> -				else
> -					printf("Allocated session pool "
> -						"on socket %d\n", socket_id);
> -				socket_ctx[socket_id].session_priv_pool =
> -						sess_mp;
> -			}
> -		}
> -	}
> -
> -
>  	printf("\n");
> 
>  	return 0;
> @@ -1984,6 +1873,99 @@ port_init(uint16_t portid, uint64_t req_rx_offloads, uint64_t req_tx_offloads)
>  	printf("\n");
>  }
> 
> +static size_t
> +max_session_size(void)
> +{
> +	size_t max_sz, sz;
> +	void *sec_ctx;
> +	int16_t cdev_id, port_id, n;
> +
> +	max_sz = 0;
> +	n =  rte_cryptodev_count();
> +	for (cdev_id = 0; cdev_id != n; cdev_id++) {
> +		sz = rte_cryptodev_sym_get_private_session_size(cdev_id);
> +		if (sz > max_sz)
> +			max_sz = sz;
> +		/*
> +		 * If crypto device is security capable, need to check the
> +		 * size of security session as well.
> +		 */
> +
> +		/* Get security context of the crypto device */
> +		sec_ctx = rte_cryptodev_get_sec_ctx(cdev_id);
> +		if (sec_ctx == NULL)
> +			continue;
> +
> +		/* Get size of security session */
> +		sz = rte_security_session_get_size(sec_ctx);
> +		if (sz > max_sz)
> +			max_sz = sz;
> +	}
> +
> +	RTE_ETH_FOREACH_DEV(port_id) {
> +		if ((enabled_port_mask & (1 << port_id)) == 0)
> +			continue;
> +
> +		sec_ctx = rte_eth_dev_get_sec_ctx(port_id);
> +		if (sec_ctx == NULL)
> +			continue;
> +
> +		sz = rte_security_session_get_size(sec_ctx);
> +		if (sz > max_sz)
> +			max_sz = sz;
> +	}
> +
> +	return max_sz;
> +}
> +
> +static void
> +session_pool_init(struct socket_ctx *ctx, int32_t socket_id, size_t sess_sz)
> +{
> +	char mp_name[RTE_MEMPOOL_NAMESIZE];
> +	struct rte_mempool *sess_mp;
> +
> +	snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
> +			"sess_mp_%u", socket_id);
> +	sess_mp = rte_cryptodev_sym_session_pool_create(
> +			mp_name, CDEV_MP_NB_OBJS,
> +			sess_sz, CDEV_MP_CACHE_SZ, 0,
> +			socket_id);
> +	ctx->session_pool = sess_mp;
> +
> +	if (ctx->session_pool == NULL)
> +		rte_exit(EXIT_FAILURE,
> +			"Cannot init session pool on socket %d\n", socket_id);
> +	else
> +		printf("Allocated session pool on socket %d\n",	socket_id);
> +}
> +
> +static void
> +session_priv_pool_init(struct socket_ctx *ctx, int32_t socket_id,
> +	size_t sess_sz)
> +{
> +	char mp_name[RTE_MEMPOOL_NAMESIZE];
> +	struct rte_mempool *sess_mp;
> +
> +	snprintf(mp_name, RTE_MEMPOOL_NAMESIZE,
> +			"sess_mp_priv_%u", socket_id);
> +	sess_mp = rte_mempool_create(mp_name,
> +			CDEV_MP_NB_OBJS,
> +			sess_sz,
> +			CDEV_MP_CACHE_SZ,
> +			0, NULL, NULL, NULL,
> +			NULL, socket_id,
> +			0);
> +	ctx->session_priv_pool = sess_mp;
> +
> +	if (ctx->session_priv_pool == NULL)
> +		rte_exit(EXIT_FAILURE,
> +			"Cannot init session priv pool on socket %d\n",
> +			socket_id);
> +	else
> +		printf("Allocated session priv pool on socket %d\n",
> +			socket_id);
> +}
> +
>  static void
>  pool_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t nb_mbuf)
>  {
> @@ -2064,9 +2046,11 @@ main(int32_t argc, char **argv)
>  {
>  	int32_t ret;
>  	uint32_t lcore_id;
> +	uint32_t i;
>  	uint8_t socket_id;
>  	uint16_t portid;
>  	uint64_t req_rx_offloads, req_tx_offloads;
> +	size_t sess_sz;
> 
>  	/* init EAL */
>  	ret = rte_eal_init(argc, argv);
> @@ -2094,7 +2078,8 @@ main(int32_t argc, char **argv)
> 
>  	nb_lcores = rte_lcore_count();
> 
> -	/* Replicate each context per socket */
> +	sess_sz = max_session_size();
> +
>  	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
>  		if (rte_lcore_is_enabled(lcore_id) == 0)
>  			continue;
> @@ -2104,20 +2089,14 @@ main(int32_t argc, char **argv)
>  		else
>  			socket_id = 0;
> 
> +		/* mbuf_pool is initialised by the pool_init() function*/
>  		if (socket_ctx[socket_id].mbuf_pool)
>  			continue;
> 
> -		/* initilaze SPD */
> -		sp4_init(&socket_ctx[socket_id], socket_id);
> -
> -		sp6_init(&socket_ctx[socket_id], socket_id);
> -
> -		/* initilaze SAD */
> -		sa_init(&socket_ctx[socket_id], socket_id);
> -
> -		rt_init(&socket_ctx[socket_id], socket_id);
> -
>  		pool_init(&socket_ctx[socket_id], socket_id, NB_MBUF);
> +		session_pool_init(&socket_ctx[socket_id], socket_id, sess_sz);
> +		session_priv_pool_init(&socket_ctx[socket_id], socket_id,
> +			sess_sz);
>  	}
> 
>  	RTE_ETH_FOREACH_DEV(portid) {
> @@ -2135,7 +2114,11 @@ main(int32_t argc, char **argv)
>  		if ((enabled_port_mask & (1 << portid)) == 0)
>  			continue;
> 
> -		/* Start device */
> +		/*
> +		 * Start device
> +		 * note: device must be started before a flow rule
> +		 * can be installed.
> +		 */
>  		ret = rte_eth_dev_start(portid);
>  		if (ret < 0)
>  			rte_exit(EXIT_FAILURE, "rte_eth_dev_start: "
> @@ -2153,6 +2136,19 @@ main(int32_t argc, char **argv)
>  			RTE_ETH_EVENT_IPSEC, inline_ipsec_event_callback, NULL);
>  	}
> 
> +	/* Replicate each context per socket */
> +	for (i = 0; i < NB_SOCKETS && i < rte_socket_count(); i++) {
> +		socket_id = rte_socket_id_by_idx(i);
> +		if ((socket_ctx[socket_id].mbuf_pool != NULL) &&
> +			(socket_ctx[socket_id].sa_in == NULL) &&
> +			(socket_ctx[socket_id].sa_out == NULL)) {
> +			sa_init(&socket_ctx[socket_id], socket_id);
> +			sp4_init(&socket_ctx[socket_id], socket_id);
> +			sp6_init(&socket_ctx[socket_id], socket_id);
> +			rt_init(&socket_ctx[socket_id], socket_id);
> +		}
> +	}
> +
>  	check_all_ports_link_status(enabled_port_mask);
> 
>  	/* launch per-lcore init on every lcore */
> diff --git a/examples/ipsec-secgw/ipsec.c b/examples/ipsec-secgw/ipsec.c
> index 7b85330..40a6123 100644
> --- a/examples/ipsec-secgw/ipsec.c
> +++ b/examples/ipsec-secgw/ipsec.c
> @@ -40,7 +40,7 @@ set_ipsec_conf(struct ipsec_sa *sa, struct rte_security_ipsec_xform *ipsec)
>  }
> 
>  int
> -create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
> +create_lookaside_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
>  {
>  	struct rte_cryptodev_info cdev_info;
>  	unsigned long cdev_id_qp = 0;


Actually looking at it a bit closer:

if (sa->type == RTE_SECURITY_ACTION_TYPE_NONE) {

I think we need to remove that line above, otherwise cdev_id_qp
Would not be initialized for LOOKASIDE_PROTO.
BTW, as I can see, same problem exists in current code.


                ret = rte_hash_lookup_data(ipsec_ctx->cdev_map, &key,
                                (void **)&cdev_id_qp);
                if (ret < 0) {
                        RTE_LOG(ERR, IPSEC,
                                "No cryptodev: core %u, cipher_algo %u, "
                                "auth_algo %u, aead_algo %u\n",
                                key.lcore_id,
                                key.cipher_algo,
                                key.auth_algo,
                                key.aead_algo);
                        return -1;
                }
        }

> @@ -108,23 +108,81 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
>  				"SEC Session init failed: err: %d\n", ret);
>  				return -1;
>  			}
> -		} else if (sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO) {
> +		} else if (
> +			(sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO) ||
> +			(sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL)
> +			) {
> +				RTE_LOG(ERR, IPSEC, "Inline not supported\n");
> +				return -1;
> +		}
> +	} else {
> +		sa->crypto_session = rte_cryptodev_sym_session_create(
> +				ipsec_ctx->session_pool);
> +		rte_cryptodev_sym_session_init(ipsec_ctx->tbl[cdev_id_qp].id,
> +				sa->crypto_session, sa->xforms,
> +				ipsec_ctx->session_priv_pool);
> +
> +		rte_cryptodev_info_get(ipsec_ctx->tbl[cdev_id_qp].id,
> +				&cdev_info);
> +	}
> +
> +	sa->cdev_id_qp = cdev_id_qp;
> +
> +	return 0;
> +}
> +
> +int
> +create_inline_session(struct socket_ctx *skt_ctx, struct ipsec_sa *sa)
> +{
> +	unsigned long cdev_id_qp = 0;

This var is not really used in this function.

> +	int32_t ret = 0;
> +	struct rte_security_ctx *sec_ctx;
> +
> +	RTE_LOG_DP(DEBUG, IPSEC, "Create session for SA spi %u on port %u\n",
> +		sa->spi, sa->portid);
> +
> +	if (sa->type != RTE_SECURITY_ACTION_TYPE_NONE) {

I think this always be true here and could be removed.


> +		struct rte_security_session_conf sess_conf = {
> +			.action_type = sa->type,
> +			.protocol = RTE_SECURITY_PROTOCOL_IPSEC,
> +			{.ipsec = {
> +				.spi = sa->spi,
> +				.salt = sa->salt,
> +				.options = { 0 },
> +				.direction = sa->direction,
> +				.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
> +				.mode = (sa->flags == IP4_TUNNEL ||
> +						sa->flags == IP6_TUNNEL) ?
> +					RTE_SECURITY_IPSEC_SA_MODE_TUNNEL :
> +					RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
> +			} },
> +			.crypto_xform = sa->xforms,
> +			.userdata = NULL,
> +		};
> +
> +		if (sa->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO) {
>  			struct rte_flow_error err;
> -			struct rte_security_ctx *ctx = (struct rte_security_ctx *)
> -							rte_eth_dev_get_sec_ctx(
> -							sa->portid);
>  			const struct rte_security_capability *sec_cap;
>  			int ret = 0;
> 
> -			sa->sec_session = rte_security_session_create(ctx,
> -					&sess_conf, ipsec_ctx->session_priv_pool);
> +			sec_ctx = (struct rte_security_ctx *)
> +							rte_eth_dev_get_sec_ctx(
> +							sa->portid);
> +			if (sec_ctx == NULL) {
> +				RTE_LOG(ERR, IPSEC,
> +				" rte_eth_dev_get_sec_ctx failed\n");
> +				return -1;
> +			}
> +
> +			sa->sec_session = rte_security_session_create(sec_ctx,
> +					&sess_conf, skt_ctx->session_pool);
>  			if (sa->sec_session == NULL) {
>  				RTE_LOG(ERR, IPSEC,
>  				"SEC Session init failed: err: %d\n", ret);
>  				return -1;
>  			}
> 
> -			sec_cap = rte_security_capabilities_get(ctx);
> +			sec_cap = rte_security_capabilities_get(sec_ctx);
> 
>  			/* iterate until ESP tunnel*/
>  			while (sec_cap->action !=
> @@ -147,7 +205,7 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
>  			}
> 
>  			sa->ol_flags = sec_cap->ol_flags;
> -			sa->security_ctx = ctx;
> +			sa->security_ctx = sec_ctx;
>  			sa->pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
> 
>  			sa->pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV4;
> @@ -196,7 +254,7 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
>  				/* Try RSS. */
>  				sa->action[1].type = RTE_FLOW_ACTION_TYPE_RSS;
>  				sa->action[1].conf = &action_rss;
> -				eth_dev = ctx->device;
> +				eth_dev = sec_ctx->device;
>  				rte_eth_dev_rss_hash_conf_get(sa->portid,
>  							      &rss_conf);
>  				for (i = 0, j = 0;
> @@ -252,12 +310,12 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
>  			}
>  		} else if (sa->type ==
>  				RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL) {
> -			struct rte_security_ctx *ctx =
> -					(struct rte_security_ctx *)
> -					rte_eth_dev_get_sec_ctx(sa->portid);
>  			const struct rte_security_capability *sec_cap;
> 
> -			if (ctx == NULL) {
> +			sec_ctx = (struct rte_security_ctx *)
> +					rte_eth_dev_get_sec_ctx(sa->portid);
> +
> +			if (sec_ctx == NULL) {
>  				RTE_LOG(ERR, IPSEC,
>  				"Ethernet device doesn't have security features registered\n");
>  				return -1;
> @@ -279,15 +337,15 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
> 
>  			sess_conf.userdata = (void *) sa;
> 
> -			sa->sec_session = rte_security_session_create(ctx,
> -					&sess_conf, ipsec_ctx->session_pool);
> +			sa->sec_session = rte_security_session_create(sec_ctx,
> +					&sess_conf, skt_ctx->session_pool);
>  			if (sa->sec_session == NULL) {
>  				RTE_LOG(ERR, IPSEC,
>  				"SEC Session init failed: err: %d\n", ret);
>  				return -1;
>  			}
> 
> -			sec_cap = rte_security_capabilities_get(ctx);
> +			sec_cap = rte_security_capabilities_get(sec_ctx);
> 
>  			if (sec_cap == NULL) {
>  				RTE_LOG(ERR, IPSEC,
> @@ -316,17 +374,8 @@ create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa)
>  			}
> 
>  			sa->ol_flags = sec_cap->ol_flags;
> -			sa->security_ctx = ctx;
> +			sa->security_ctx = sec_ctx;
>  		}
> -	} else {
> -		sa->crypto_session = rte_cryptodev_sym_session_create(
> -				ipsec_ctx->session_pool);
> -		rte_cryptodev_sym_session_init(ipsec_ctx->tbl[cdev_id_qp].id,
> -				sa->crypto_session, sa->xforms,
> -				ipsec_ctx->session_priv_pool);
> -
> -		rte_cryptodev_info_get(ipsec_ctx->tbl[cdev_id_qp].id,
> -				&cdev_info);
>  	}
>  	sa->cdev_id_qp = cdev_id_qp;
> 
> @@ -395,7 +444,7 @@ ipsec_enqueue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
>  			rte_prefetch0(&priv->sym_cop);
> 
>  			if ((unlikely(sa->sec_session == NULL)) &&
> -					create_session(ipsec_ctx, sa)) {
> +				create_lookaside_session(ipsec_ctx, sa)) {
>  				rte_pktmbuf_free(pkts[i]);
>  				continue;
>  			}
> @@ -414,7 +463,7 @@ ipsec_enqueue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
>  			rte_prefetch0(&priv->sym_cop);
> 
>  			if ((unlikely(sa->crypto_session == NULL)) &&
> -					create_session(ipsec_ctx, sa)) {
> +				create_lookaside_session(ipsec_ctx, sa)) {
>  				rte_pktmbuf_free(pkts[i]);
>  				continue;
>  			}
> @@ -429,12 +478,7 @@ ipsec_enqueue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
>  			}
>  			break;
>  		case RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL:
> -			if ((unlikely(sa->sec_session == NULL)) &&
> -					create_session(ipsec_ctx, sa)) {
> -				rte_pktmbuf_free(pkts[i]);
> -				continue;
> -			}
> -
> +			RTE_ASSERT(sa->sec_session != NULL);
>  			ipsec_ctx->ol_pkts[ipsec_ctx->ol_pkts_cnt++] = pkts[i];
>  			if (sa->ol_flags & RTE_SECURITY_TX_OLOAD_NEED_MDATA)
>  				rte_security_set_pkt_metadata(
> @@ -442,17 +486,11 @@ ipsec_enqueue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
>  						sa->sec_session, pkts[i], NULL);
>  			continue;
>  		case RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO:
> +			RTE_ASSERT(sa->sec_session != NULL);
>  			priv->cop.type = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
>  			priv->cop.status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
> 
>  			rte_prefetch0(&priv->sym_cop);
> -
> -			if ((unlikely(sa->sec_session == NULL)) &&
> -					create_session(ipsec_ctx, sa)) {
> -				rte_pktmbuf_free(pkts[i]);
> -				continue;
> -			}
> -
>  			rte_security_attach_session(&priv->cop,
>  					sa->sec_session);
> 
> diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
> index e9272d7..41bac0b 100644
> --- a/examples/ipsec-secgw/ipsec.h
> +++ b/examples/ipsec-secgw/ipsec.h
> @@ -312,6 +312,9 @@ void
>  enqueue_cop_burst(struct cdev_qp *cqp);
> 
>  int
> -create_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa);
> +create_lookaside_session(struct ipsec_ctx *ipsec_ctx, struct ipsec_sa *sa);
> +
> +int
> +create_inline_session(struct socket_ctx *skt_ctx, struct ipsec_sa *sa);
> 
>  #endif /* __IPSEC_H__ */
> diff --git a/examples/ipsec-secgw/ipsec_process.c b/examples/ipsec-secgw/ipsec_process.c
> index 3f9cacb..868f1a2 100644
> --- a/examples/ipsec-secgw/ipsec_process.c
> +++ b/examples/ipsec-secgw/ipsec_process.c
> @@ -95,22 +95,23 @@ fill_ipsec_session(struct rte_ipsec_session *ss, struct ipsec_ctx *ctx,
>  	/* setup crypto section */
>  	if (ss->type == RTE_SECURITY_ACTION_TYPE_NONE) {
>  		if (sa->crypto_session == NULL) {
> -			rc = create_session(ctx, sa);
> +			rc = create_lookaside_session(ctx, sa);
>  			if (rc != 0)
>  				return rc;
>  		}
>  		ss->crypto.ses = sa->crypto_session;
>  	/* setup session action type */
> -	} else {
> +	} else if (sa->type == RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) {
>  		if (sa->sec_session == NULL) {
> -			rc = create_session(ctx, sa);
> +			rc = create_lookaside_session(ctx, sa);
>  			if (rc != 0)
>  				return rc;
>  		}
>  		ss->security.ses = sa->sec_session;
>  		ss->security.ctx = sa->security_ctx;
>  		ss->security.ol_flags = sa->ol_flags;
> -	}
> +	} else
> +		RTE_ASSERT(0);
> 
>  	rc = rte_ipsec_session_prepare(ss);
>  	if (rc != 0)
> diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
> index 8d47d1d..e8e55bf 100644
> --- a/examples/ipsec-secgw/sa.c
> +++ b/examples/ipsec-secgw/sa.c
> @@ -777,11 +777,13 @@ check_eth_dev_caps(uint16_t portid, uint32_t inbound)
> 
>  static int
>  sa_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
> -		uint32_t nb_entries, uint32_t inbound)
> +		uint32_t nb_entries, uint32_t inbound,
> +		struct socket_ctx *skt_ctx)
>  {
>  	struct ipsec_sa *sa;
>  	uint32_t i, idx;
>  	uint16_t iv_length, aad_length;
> +	int32_t rc;
> 
>  	/* for ESN upper 32 bits of SQN also need to be part of AAD */
>  	aad_length = (app_sa_prm.enable_esn != 0) ? sizeof(uint32_t) : 0;
> @@ -834,6 +836,17 @@ sa_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
> 
>  			sa->xforms = &sa_ctx->xf[idx].a;
> 
> +			if (sa->type ==
> +				RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL ||
> +				sa->type ==
> +				RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO) {
> +				rc = create_inline_session(skt_ctx, sa);
> +				if (rc != 0) {
> +					RTE_LOG(ERR, IPSEC_ESP,
> +						"create_inline_session() failed\n");
> +					return -EINVAL;
> +				}
> +			}
>  			print_one_sa_rule(sa, inbound);
>  		} else {
>  			switch (sa->cipher_algo) {
> @@ -909,16 +922,16 @@ sa_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
> 
>  static inline int
>  sa_out_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
> -		uint32_t nb_entries)
> +		uint32_t nb_entries, struct socket_ctx *skt_ctx)
>  {
> -	return sa_add_rules(sa_ctx, entries, nb_entries, 0);
> +	return sa_add_rules(sa_ctx, entries, nb_entries, 0, skt_ctx);
>  }
> 
>  static inline int
>  sa_in_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
> -		uint32_t nb_entries)
> +		uint32_t nb_entries, struct socket_ctx *skt_ctx)
>  {
> -	return sa_add_rules(sa_ctx, entries, nb_entries, 1);
> +	return sa_add_rules(sa_ctx, entries, nb_entries, 1, skt_ctx);
>  }
> 
>  /*
> @@ -1012,10 +1025,12 @@ fill_ipsec_sa_prm(struct rte_ipsec_sa_prm *prm, const struct ipsec_sa *ss,
>  	return 0;
>  }
> 
> -static void
> +static int
>  fill_ipsec_session(struct rte_ipsec_session *ss, struct rte_ipsec_sa *sa,
>  	const struct ipsec_sa *lsa)
>  {
> +	int32_t rc = 0;
> +
>  	ss->sa = sa;
>  	ss->type = lsa->type;
> 
> @@ -1028,6 +1043,17 @@ fill_ipsec_session(struct rte_ipsec_session *ss, struct rte_ipsec_sa *sa,
>  		ss->security.ctx = lsa->security_ctx;
>  		ss->security.ol_flags = lsa->ol_flags;
>  	}
> +
> +	if (ss->type == RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO ||
> +		ss->type == RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL) {
> +		if (ss->security.ses != NULL) {
> +			rc = rte_ipsec_session_prepare(ss);
> +			if (rc != 0)
> +				memset(ss, 0, sizeof(*ss));
> +		}
> +	}
> +
> +	return rc;
>  }
> 
>  /*
> @@ -1062,8 +1088,8 @@ ipsec_sa_init(struct ipsec_sa *lsa, struct rte_ipsec_sa *sa, uint32_t sa_size)
>  	if (rc < 0)
>  		return rc;
> 
> -	fill_ipsec_session(&lsa->ips, sa, lsa);
> -	return 0;
> +	rc = fill_ipsec_session(&lsa->ips, sa, lsa);
> +	return rc;
>  }
> 
>  /*
> @@ -1166,7 +1192,7 @@ sa_init(struct socket_ctx *ctx, int32_t socket_id)
>  				"context %s in socket %d\n", rte_errno,
>  				name, socket_id);
> 
> -		sa_in_add_rules(ctx->sa_in, sa_in, nb_sa_in);
> +		sa_in_add_rules(ctx->sa_in, sa_in, nb_sa_in, ctx);
> 
>  		if (app_sa_prm.enable != 0) {
>  			rc = ipsec_satbl_init(ctx->sa_in, sa_in, nb_sa_in,
> @@ -1186,7 +1212,7 @@ sa_init(struct socket_ctx *ctx, int32_t socket_id)
>  				"context %s in socket %d\n", rte_errno,
>  				name, socket_id);
> 
> -		sa_out_add_rules(ctx->sa_out, sa_out, nb_sa_out);
> +		sa_out_add_rules(ctx->sa_out, sa_out, nb_sa_out, ctx);
> 
>  		if (app_sa_prm.enable != 0) {
>  			rc = ipsec_satbl_init(ctx->sa_out, sa_out, nb_sa_out,
> --
> 2.7.4