From: Vincas Dargis <vindrg@gmail.com>
To: Salvatore Bonaccorso <carnil@debian.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>, netdev@vger.kernel.org
Subject: Re: About r8169 regression 5.4
Date: Sun, 16 Feb 2020 00:07:28 +0200 [thread overview]
Message-ID: <269f588f-78f2-4acf-06d3-eeefaa5d8e0f@gmail.com> (raw)
In-Reply-To: <20200215161247.GA179065@eldamar.local>
2020-02-15 18:12, Salvatore Bonaccorso rašė:
> You can generate the a7a92cf81589 revert patch, and then for simple
> testing of a patch and build have a look at the Simple patching and
> building[1] section of the kernel handbook.
>
> Hope this helps,
>
> Regards,
> Salvatore
>
> [1] https://kernel-team.pages.debian.net/kernel-handbook/ch-common-tasks.html#s4.2.2
>
Sadly, after running for an hour, I still got this:
Feb 15 23:49:21 vinco kernel: [ 3670.779254] ------------[ cut here ]------------
Feb 15 23:49:21 vinco kernel: [ 3670.779275] NETDEV WATCHDOG: enp5s0f1 (r8169): transmit queue 0 timed out
Feb 15 23:49:21 vinco kernel: [ 3670.779299] WARNING: CPU: 6 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x248/0x250
Feb 15 23:49:21 vinco kernel: [ 3670.779300] Modules linked in: rfcomm(E) xt_recent(E) ipt_REJECT(E) nf_reject_ipv4(E) xt_multiport(E) xt_conntrack(E) xt_hashlimit(E) xt_addrtype(E) xt_iface(OE)
xt_mark(E) nft_chain_nat(E) xt_comment(E) xt_CT(E) xt_owner(E) xt_tcpudp(E) nft_compat(E) nft_counter(E) xt_NFLOG(E) nf_log_ipv4(E) nf_log_common(E) xt_LOG(E) nf_nat_tftp(E) nf_nat_snmp_basic(E)
nf_conntrack_snmp(E) nf_nat_sip(E) nf_nat_pptp(E) nf_nat_irc(E) nf_nat_h323(E) nf_nat_ftp(E) nf_nat_amanda(E) ts_kmp(E) nf_conntrack_amanda(E) nf_nat(E) nf_conntrack_sane(E) nf_conntrack_tftp(E)
nf_conntrack_sip(E) nf_conntrack_pptp(E) nf_conntrack_netlink(E) nf_conntrack_netbios_ns(E) nf_conntrack_broadcast(E) nf_conntrack_irc(E) nf_conntrack_h323(E) nf_conntrack_ftp(E) nf_conntrack(E)
nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) vboxnetadp(OE) vboxnetflt(OE) xfrm_user(E) xfrm_algo(E) vboxdrv(OE) l2tp_ppp(E) l2tp_netlink(E) l2tp_core(E) ip6_udp_tunnel(E) udp_tunnel(E) pppox(E)
ppp_generic(E) slhc(E) nfnetlink_log(E) bnep(E)
Feb 15 23:49:21 vinco kernel: [ 3670.779353] nfnetlink(E) bbswitch(OE) intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E)
crct10dif_pclmul(E) ghash_clmulni_intel(E) binfmt_misc(E) btusb(E) btrtl(E) btbcm(E) btintel(E) nls_ascii(E) nls_cp437(E) bluetooth(E) snd_hda_codec_realtek(E) aesni_intel(E) uvcvideo(E) vfat(E)
crypto_simd(E) videobuf2_vmalloc(E) fat(E) snd_hda_codec_generic(E) cryptd(E) videobuf2_memops(E) glue_helper(E) ledtrig_audio(E) videobuf2_v4l2(E) iwlmvm(E) intel_cstate(E) drbg(E)
snd_hda_codec_hdmi(E) intel_uncore(E) videobuf2_common(E) mac80211(E) ansi_cprng(E) libarc4(E) videodev(E) efi_pstore(E) joydev(E) snd_hda_intel(E) mc(E) snd_intel_dspcfg(E) intel_rapl_perf(E)
ecdh_generic(E) pcspkr(E) ecc(E) serio_raw(E) snd_hda_codec(E) asus_nb_wmi(E) iwlwifi(E) asus_wmi(E) snd_hda_core(E) efivars(E) sparse_keymap(E) snd_hwdep(E) sg(E) snd_pcm(E) cfg80211(E) snd_timer(E)
iTCO_wdt(E) iTCO_vendor_support(E) snd(E) watchdog(E) rfkill(E)
Feb 15 23:49:21 vinco kernel: [ 3670.779386] soundcore(E) ie31200_edac(E) evdev(E) asus_wireless(E) ac(E) parport_pc(E) ppdev(E) lp(E) parport(E) efivarfs(E) ip_tables(E) x_tables(E) autofs4(E)
ext4(E) crc16(E) mbcache(E) jbd2(E) btrfs(E) blake2b_generic(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) libcrc32c(E) crc32c_generic(E) sr_mod(E) sd_mod(E) cdrom(E) hid_logitech_hidpp(E)
hid_logitech_dj(E) hid_generic(E) usbhid(E) hid(E) i915(E) rtsx_pci_sdmmc(E) i2c_algo_bit(E) mmc_core(E) xhci_pci(E) drm_kms_helper(E) ehci_pci(E) ahci(E) lpc_ich(E) rtsx_pci(E) ehci_hcd(E)
mfd_core(E) drm(E) libahci(E) xhci_hcd(E) crc32_pclmul(E) mxm_wmi(E) libata(E) crc32c_intel(E) r8169(E) realtek(E) psmouse(E) usbcore(E) i2c_i801(E) scsi_mod(E) libphy(E) usb_common(E) wmi(E)
battery(E) video(E) button(E)
Feb 15 23:49:21 vinco kernel: [ 3670.779418] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G OE 5.5.0-rc5-amd64 #1 Debian 5.5~rc5-1~exp1
Feb 15 23:49:21 vinco kernel: [ 3670.779419] Hardware name: ASUSTeK COMPUTER INC. N551JM/N551JM, BIOS N551JM.205 02/13/2015
Feb 15 23:49:21 vinco kernel: [ 3670.779422] RIP: 0010:dev_watchdog+0x248/0x250
Feb 15 23:49:21 vinco kernel: [ 3670.779425] Code: 85 c0 75 e5 eb 9f 4c 89 ef c6 05 a8 8b a6 00 01 e8 1d cc fa ff 44 89 e1 4c 89 ee 48 c7 c7 68 ca 55 a9 48 89 c2 e8 1a 67 9e ff <0f> 0b eb 80 0f 1f 40
00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55
Feb 15 23:49:21 vinco kernel: [ 3670.779426] RSP: 0018:ffffbf5dc01e0e68 EFLAGS: 00010286
Feb 15 23:49:21 vinco kernel: [ 3670.779428] RAX: 0000000000000000 RBX: ffffa0e11c031400 RCX: 000000000000083f
Feb 15 23:49:21 vinco kernel: [ 3670.779429] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f
Feb 15 23:49:21 vinco kernel: [ 3670.779430] RBP: ffffa0e11caee45c R08: 0000000000000471 R09: 0000000000000004
Feb 15 23:49:21 vinco kernel: [ 3670.779431] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
Feb 15 23:49:21 vinco kernel: [ 3670.779432] R13: ffffa0e11caee000 R14: ffffa0e11caee480 R15: 0000000000000001
Feb 15 23:49:21 vinco kernel: [ 3670.779433] FS: 0000000000000000(0000) GS:ffffa0e11ef80000(0000) knlGS:0000000000000000
Feb 15 23:49:21 vinco kernel: [ 3670.779434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Feb 15 23:49:21 vinco kernel: [ 3670.779435] CR2: 000004c3f29aba30 CR3: 000000020e80a005 CR4: 00000000001626e0
Feb 15 23:49:21 vinco kernel: [ 3670.779436] Call Trace:
Feb 15 23:49:21 vinco kernel: [ 3670.779439] <IRQ>
Feb 15 23:49:21 vinco kernel: [ 3670.779443] ? pfifo_fast_enqueue+0x150/0x150
Feb 15 23:49:21 vinco kernel: [ 3670.779446] call_timer_fn+0x2d/0x130
Feb 15 23:49:21 vinco kernel: [ 3670.779448] __run_timers.part.0+0x16f/0x260
Feb 15 23:49:21 vinco kernel: [ 3670.779452] ? tick_sched_handle+0x22/0x60
Feb 15 23:49:21 vinco kernel: [ 3670.779455] ? tick_sched_timer+0x38/0x80
Feb 15 23:49:21 vinco kernel: [ 3670.779457] ? tick_sched_do_timer+0x60/0x60
Feb 15 23:49:21 vinco kernel: [ 3670.779460] run_timer_softirq+0x26/0x50
Feb 15 23:49:21 vinco kernel: [ 3670.779464] __do_softirq+0xe6/0x2e9
Feb 15 23:49:21 vinco kernel: [ 3670.779469] irq_exit+0xa6/0xb0
Feb 15 23:49:21 vinco kernel: [ 3670.779471] smp_apic_timer_interrupt+0x76/0x130
Feb 15 23:49:21 vinco kernel: [ 3670.779474] apic_timer_interrupt+0xf/0x20
Feb 15 23:49:21 vinco kernel: [ 3670.779475] </IRQ>
Feb 15 23:49:21 vinco kernel: [ 3670.779479] RIP: 0010:cpuidle_enter_state+0xc9/0x3e0
Feb 15 23:49:21 vinco kernel: [ 3670.779481] Code: e8 5c ad ab ff 80 7c 24 0f 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 ea 02 00 00 31 ff e8 9e dc b1 ff fb 66 0f 1f 44 00 00 <45> 85 ed 0f 88 40 02
00 00 49 63 d5 4c 2b 64 24 10 48 8d 04 52 48
Feb 15 23:49:21 vinco kernel: [ 3670.779482] RSP: 0018:ffffbf5dc00c7e68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
Feb 15 23:49:21 vinco kernel: [ 3670.779483] RAX: ffffa0e11efacac0 RBX: ffffdf5dbfd9e0f0 RCX: 000000000000001f
Feb 15 23:49:21 vinco kernel: [ 3670.779484] RDX: 0000000000000000 RSI: 0000000033518eeb RDI: 0000000000000000
Feb 15 23:49:21 vinco kernel: [ 3670.779485] RBP: ffffffffa96bdaa0 R08: 00000356ab7df88b R09: 000000000002c3e0
Feb 15 23:49:21 vinco kernel: [ 3670.779486] R10: 0000000000001592 R11: ffffa0e11efab9a4 R12: 00000356ab7df88b
Feb 15 23:49:21 vinco kernel: [ 3670.779487] R13: 0000000000000005 R14: 0000000000000005 R15: ffffa0e11ca98000
Feb 15 23:49:21 vinco kernel: [ 3670.779490] ? cpuidle_enter_state+0xa4/0x3e0
Feb 15 23:49:21 vinco kernel: [ 3670.779493] cpuidle_enter+0x29/0x40
Feb 15 23:49:21 vinco kernel: [ 3670.779496] do_idle+0x1e4/0x280
Feb 15 23:49:21 vinco kernel: [ 3670.779499] cpu_startup_entry+0x19/0x20
Feb 15 23:49:21 vinco kernel: [ 3670.779502] start_secondary+0x15f/0x1b0
Feb 15 23:49:21 vinco kernel: [ 3670.779506] secondary_startup_64+0xa4/0xb0
Feb 15 23:49:21 vinco kernel: [ 3670.779508] ---[ end trace a87faacfee854ba7 ]---
Though what is strange that network does seems to be usable! I don't have to reboot to make browser and other application to continue working. Maybe other changes up to 5.5-rc5 helped?
next prev parent reply other threads:[~2020-02-15 22:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-14 17:21 About r8169 regression 5.4 Vincas Dargis
2020-02-14 20:14 ` Heiner Kallweit
2020-02-15 9:22 ` Vincas Dargis
2020-02-15 16:12 ` Salvatore Bonaccorso
2020-02-15 21:10 ` Vincas Dargis
2020-02-15 22:07 ` Vincas Dargis [this message]
2020-02-15 22:35 ` Heiner Kallweit
2020-02-15 23:27 ` Heiner Kallweit
2020-02-17 18:08 ` Vincas Dargis
2020-02-17 19:59 ` Heiner Kallweit
2020-02-18 18:36 ` Vincas Dargis
2020-02-19 21:54 ` Heiner Kallweit
2020-02-20 17:36 ` Vincas Dargis
2020-02-20 18:32 ` Heiner Kallweit
2020-02-21 20:21 ` Vincas Dargis
2020-02-21 21:01 ` Heiner Kallweit
2020-02-23 13:24 ` Vincas Dargis
2020-02-23 13:27 ` Heiner Kallweit
2020-02-24 19:49 ` Heiner Kallweit
2020-02-27 18:25 ` Vincas Dargis
2020-04-12 11:56 ` Lauri Jakku
2020-04-12 12:02 ` Lauri Jakku
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=269f588f-78f2-4acf-06d3-eeefaa5d8e0f@gmail.com \
--to=vindrg@gmail.com \
--cc=carnil@debian.org \
--cc=hkallweit1@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.