All of lore.kernel.org
 help / color / mirror / Atom feed
From: Carlos Bilbao <bilbao@vt.edu>
To: gregkh@linuxfoundation.org
Cc: alexander.deucher@amd.com, davem@davemloft.net,
	mchehab+huawei@kernel.org, kuba@kernel.org,
	James.Bottomley@hansenpartnership.com, netdev@vger.kernel.org,
	linux-parisc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] drivers: Follow the indentation coding standard on printks
Date: Thu, 08 Jul 2021 09:10:01 -0400	[thread overview]
Message-ID: <2784471.e9J7NaK4W3@iron-maiden> (raw)

Fix indentation of printks that start at the beginning of the line. Change this 
for the right number of space characters, or tabs if the file uses them. 

Signed-off-by: Carlos Bilbao <bilbao@vt.edu>
---
 drivers/atm/eni.c                      | 2 +-
 drivers/atm/iphase.c                   | 2 +-
 drivers/atm/suni.c                     | 4 ++--
 drivers/atm/zatm.c                     | 8 ++++----
 drivers/net/ethernet/dec/tulip/de4x5.c | 2 +-
 drivers/net/sb1000.c                   | 4 ++--
 drivers/parisc/iosapic.c               | 4 ++--
 drivers/parisc/sba_iommu.c             | 2 +-
 8 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 422753d52244..6d10fd62ba7e 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1456,7 +1456,7 @@ static int start_tx(struct atm_dev *dev)
 
 static void foo(void)
 {
-printk(KERN_INFO
+  printk(KERN_INFO
   "tx_complete=%d,dma_complete=%d,queued=%d,requeued=%d,sub=%d,\n"
   "backlogged=%d,rx_enqueued=%d,rx_dequeued=%d,putting=%d,pushed=%d\n",
   tx_complete,dma_complete,queued,requeued,submitted,backlogged,
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index bc8e8d9f176b..65bb700cd5af 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -1246,7 +1246,7 @@ static void rx_intr(struct atm_dev *dev)
                ((iadev->rx_pkt_cnt - iadev->rx_tmp_cnt) == 0)) {
         for (i = 1; i <= iadev->num_rx_desc; i++)
                free_desc(dev, i);
-printk("Test logic RUN!!!!\n");
+        printk("Test logic RUN!!!!\n");
         writew( ~(RX_FREEQ_EMPT|RX_EXCP_RCVD),iadev->reass_reg+REASS_MASK_REG);
         iadev->rxing = 1;
      }
diff --git a/drivers/atm/suni.c b/drivers/atm/suni.c
index 21e5acc766b8..149605cdb859 100644
--- a/drivers/atm/suni.c
+++ b/drivers/atm/suni.c
@@ -328,8 +328,8 @@ static int suni_start(struct atm_dev *dev)
 		timer_setup(&poll_timer, suni_hz, 0);
 		poll_timer.expires = jiffies+HZ;
 #if 0
-printk(KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n",(unsigned long) poll_timer.list.prev,
-    (unsigned long) poll_timer.list.next);
+	printk(KERN_DEBUG "[u] p=0x%lx,n=0x%lx\n",(unsigned long) poll_timer.list.prev,
+	    (unsigned long) poll_timer.list.next);
 #endif
 		add_timer(&poll_timer);
 	}
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index cf5fffcf98a1..4fb89ed47311 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -380,7 +380,7 @@ static void poll_rx(struct atm_dev *dev,int mbx)
 			pos = zatm_dev->mbx_start[mbx];
 		cells = here[0] & uPD98401_AAL5_SIZE;
 #if 0
-printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]);
+		printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]);
 {
 unsigned long *x;
 		printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
@@ -403,14 +403,14 @@ EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >>
 		skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb;
 		__net_timestamp(skb);
 #if 0
-printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3],
+		printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3],
   ((unsigned *) skb->data)[-2],((unsigned *) skb->data)[-1],
   ((unsigned *) skb->data)[0]);
 #endif
 		EVENT("skb 0x%lx, here 0x%lx\n",(unsigned long) skb,
 		    (unsigned long) here);
 #if 0
-printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
+		printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
 #endif
 		size = error ? 0 : ntohs(((__be16 *) skb->data)[cells*
 		    ATM_CELL_PAYLOAD/sizeof(u16)-3]);
@@ -664,7 +664,7 @@ static int do_tx(struct sk_buff *skb)
 		EVENT("dsc (0x%lx)\n",(unsigned long) dsc,0);
 	}
 	else {
-printk("NONONONOO!!!!\n");
+		printk("NONONONOO!!!!\n");
 		dsc = NULL;
 #if 0
 		u32 *put;
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index b125d7faefdf..155cfe8800cd 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -3169,7 +3169,7 @@ dc2114x_autoconf(struct net_device *dev)
 
     default:
 	lp->tcount++;
-printk("Huh?: media:%02x\n", lp->media);
+	printk("Huh?: media:%02x\n", lp->media);
 	lp->media = INIT;
 	break;
     }
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index e88af978f63c..54a7c7613434 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -760,7 +760,7 @@ sb1000_rx(struct net_device *dev)
 
 	insw(ioaddr, (unsigned short*) st, 1);
 #ifdef XXXDEBUG
-printk("cm0: received: %02x %02x\n", st[0], st[1]);
+	printk("cm0: received: %02x %02x\n", st[0], st[1]);
 #endif /* XXXDEBUG */
 	lp->rx_frames++;
 
@@ -805,7 +805,7 @@ printk("cm0: received: %02x %02x\n", st[0], st[1]);
 		/* get data length */
 		insw(ioaddr, buffer, NewDatagramHeaderSize / 2);
 #ifdef XXXDEBUG
-printk("cm0: IP identification: %02x%02x  fragment offset: %02x%02x\n", buffer[30], buffer[31], buffer[32], buffer[33]);
+		printk("cm0: IP identification: %02x%02x  fragment offset: %02x%02x\n", buffer[30], buffer[31], buffer[32], buffer[33]);
 #endif /* XXXDEBUG */
 		if (buffer[0] != NewDatagramHeaderSkip) {
 			if (sb1000_debug > 1)
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 8a3b0c3a1e92..5d27c23e6429 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -633,7 +633,7 @@ static void iosapic_unmask_irq(struct irq_data *d)
 	printk("\n");
 }
 
-printk("iosapic_enable_irq(): sel ");
+	printk("iosapic_enable_irq(): sel ");
 {
 	struct iosapic_info *isp = vi->iosapic;
 
@@ -642,7 +642,7 @@ printk("iosapic_enable_irq(): sel ");
 		printk(" %x", d1);
 	}
 }
-printk("\n");
+	printk("\n");
 #endif
 
 	/*
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index dce4cdf786cd..c3381facdfc5 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1550,7 +1550,7 @@ static void sba_hw_init(struct sba_device *sba_dev)
 
 
 #if 0
-printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
+	printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
 	PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
 
 	/*
-- 
2.25.1




             reply	other threads:[~2021-07-08 13:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-08 13:10 Carlos Bilbao [this message]
2021-07-08 14:40 ` [PATCH] drivers: Follow the indentation coding standard on printks Greg KH
2021-07-08 15:19   ` [PATCH] drivers: atm: " Carlos Bilbao
2021-07-08 15:48     ` Andrew Lunn
2021-07-08 17:06       ` Carlos Bilbao
2021-07-08 17:23         ` [PATCH net-next v2] " Carlos Bilbao
2021-07-08 17:27       ` Carlos Bilbao
2021-07-08 18:15         ` Andrew Lunn
2021-07-08 14:53 ` [PATCH] drivers: " Andrew Lunn
2021-07-08 15:08   ` Carlos Bilbao
2021-07-08 21:25 ` Rolf Eike Beer
2021-07-09  0:27   ` Stephen Hemminger
2021-07-09  6:43   ` Helge Deller
2021-07-09 10:30     ` bilbao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2784471.e9J7NaK4W3@iron-maiden \
    --to=bilbao@vt.edu \
    --cc=James.Bottomley@hansenpartnership.com \
    --cc=alexander.deucher@amd.com \
    --cc=davem@davemloft.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-parisc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.