From: Thomas Krause <thomaskrause@posteo.de>
To: ath11k@lists.infradead.org
Subject: pci_alloc_irq_vectors fails ENOSPC for XPS 13 9310
Date: Sat, 17 Oct 2020 13:01:46 +0200 [thread overview]
Message-ID: <2849fd39-a7a6-8366-7c78-fc9fec4dffa4@posteo.de> (raw)
Hello,
some variants of Dell XPS 13 9310 model have a QCA6390 device and I was
trying to make it work using the ath.git master branch (tag
ath-202010011934).
Unfortunatly, I get the following error messages when loading the module:
> [ 672.277726] ath11k_pci 0000:56:00.0: WARNING: ath11k PCI support is
> experimental!
> [ 672.277925] ath11k_pci 0000:56:00.0: BAR 0: assigned [mem
> 0x8c300000-0x8c3fffff 64bit]
> [ 672.278020] ath11k_pci 0000:56:00.0: failed to get 32 MSI vectors,
> only -28 available
> [ 672.278024] ath11k_pci 0000:56:00.0: failed to enable msi: -28
> [ 672.278144] ath11k_pci: probe of 0000:56:00.0 failed with error -28
-28 seems to reference ENOSPC, which seems to be related to the minimum
number of vectors not beeing available. lspci output is
> 56:00.0 Network controller: Qualcomm Device 1101 (rev 01)
> Subsystem: Rivet Networks Device a501
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Region 0: Memory at 8c300000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable- Count=1/32 Maskable+ 64bit-
> Address: fee01004 Data: 40ef
> Masking: 00000000 Pending: 00000000
> Capabilities: [70] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> SlotPowerLimit 10.000W
> DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed 8GT/s, Width x1, ASPM L0s L1, Exit
> Latency L0s <1us, L1 <64us
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
> LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s (downgraded), Width x1 (ok)
> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+,
> NROPrPrP-, LTR+
> 10BitTagComp-, 10BitTagReq-, OBFF Not Supported, ExtFmt-,
> EETLPPrefix-
> EmergencyPowerReduction Not Supported,
> EmergencyPowerReductionInit-
> FRS-, TPHComp+, ExtTPHComp-
> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+,
> OBFF Disabled
> AtomicOpsCtl: ReqEn-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> Capabilities: [100 v2] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> AdvNonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> AdvNonFatalErr+
> AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
> ECRCChkCap+ ECRCChkEn-
> MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> HeaderLog: 00000000 00000000 00000000 00000000
> Capabilities: [148 v1] Secondary PCI Express
> LnkCtl3: LnkEquIntrruptEn-, PerformEqu-
> LaneErrStat: 0
> Capabilities: [158 v1] Transaction Processing Hints
> No steering table available
> Capabilities: [1e4 v1] Latency Tolerance Reporting
> Max snoop latency: 3145728ns
> Max no snoop latency: 3145728ns
> Capabilities: [1ec v1] L1 PM Substates
> L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
> L1_PM_Substates+
> PortCommonModeRestoreTime=70us PortTPowerOnTime=0us
> L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
> T_CommonMode=0us LTR1.2_Threshold=81920ns
> L1SubCtl2: T_PwrOn=44us
> Kernel modules: ath11k_pci
It there anything in my side I can to to fix the vector allocation or is
the XPS 13 9310 just not supported? Bluetooth works with this kernel
version, only Wifi fails.
Best,
Thomas
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next reply other threads:[~2020-10-17 11:01 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-17 11:01 Thomas Krause [this message]
2020-10-19 8:09 ` pci_alloc_irq_vectors fails ENOSPC for XPS 13 9310 Kalle Valo
2020-10-20 20:46 ` Thomas Krause
2020-11-02 18:34 ` Kalle Valo
2020-11-02 18:49 ` Kalle Valo
2020-11-02 18:49 ` Kalle Valo
2020-11-02 20:57 ` Bjorn Helgaas
2020-11-02 20:57 ` Bjorn Helgaas
2020-11-03 3:01 ` Carl Huang
2020-11-03 3:01 ` Carl Huang
2020-11-03 6:49 ` Kalle Valo
2020-11-03 6:49 ` Kalle Valo
2020-11-03 16:08 ` Bjorn Helgaas
2020-11-03 16:08 ` Bjorn Helgaas
2020-11-03 21:08 ` Thomas Gleixner
2020-11-03 21:08 ` Thomas Gleixner
2020-11-03 22:42 ` Thomas Gleixner
2020-11-03 22:42 ` Thomas Gleixner
2020-11-09 18:44 ` Kalle Valo
2020-11-09 18:44 ` Kalle Valo
2020-11-04 13:04 ` Thomas Krause
2020-11-04 13:04 ` Thomas Krause
2020-11-04 15:26 ` Thomas Gleixner
2020-11-04 15:26 ` Thomas Gleixner
2020-11-05 13:23 ` Kalle Valo
2020-11-05 13:23 ` Kalle Valo
2020-11-06 11:57 ` Stefani Seibold
2020-11-10 8:33 ` Kalle Valo
2020-11-10 8:33 ` Kalle Valo
2020-11-11 8:53 ` Thomas Krause
2020-11-11 8:53 ` Thomas Krause
2020-11-11 9:22 ` Kalle Valo
2020-11-11 9:22 ` Kalle Valo
2020-11-11 19:10 ` Kalle Valo
2020-11-11 19:10 ` Kalle Valo
2020-11-11 19:24 ` wi nk
2020-11-11 19:24 ` wi nk
2020-11-11 19:30 ` wi nk
2020-11-11 19:30 ` wi nk
2020-11-11 19:45 ` Kalle Valo
2020-11-11 19:45 ` Kalle Valo
2020-11-11 20:12 ` wi nk
2020-11-11 20:12 ` wi nk
2020-11-11 21:35 ` Stefani Seibold
2020-11-11 21:35 ` Stefani Seibold
2020-11-11 22:02 ` Stefani Seibold
2020-11-11 22:02 ` Stefani Seibold
2020-11-12 0:24 ` wi nk
2020-11-12 0:24 ` wi nk
2020-11-12 1:10 ` wi nk
2020-11-12 1:10 ` wi nk
2020-11-12 1:11 ` wi nk
2020-11-12 1:11 ` wi nk
2020-11-12 2:31 ` wi nk
2020-11-12 2:31 ` wi nk
2020-11-12 6:29 ` Carl Huang
2020-11-12 6:29 ` Carl Huang
2020-11-12 7:05 ` Stefani Seibold
2020-11-12 7:05 ` Stefani Seibold
2020-11-12 7:15 ` Kalle Valo
2020-11-12 7:15 ` Kalle Valo
2020-11-12 7:41 ` wi nk
2020-11-12 7:41 ` wi nk
2020-11-12 8:59 ` Kalle Valo
2020-11-12 8:59 ` Kalle Valo
2020-11-12 15:44 ` wi nk
2020-11-12 15:44 ` wi nk
2020-11-13 9:52 ` wi nk
2020-11-13 9:52 ` wi nk
2020-11-15 13:30 ` Thomas Krause
2020-11-15 13:30 ` Thomas Krause
2020-11-15 19:55 ` wi nk
2020-11-15 19:55 ` wi nk
2020-11-17 15:49 ` wi nk
2020-11-17 15:49 ` wi nk
2020-11-17 20:59 ` Thomas Gleixner
2020-11-17 20:59 ` Thomas Gleixner
2020-11-18 10:22 ` wi nk
2020-11-18 10:22 ` wi nk
2020-11-11 9:39 ` Thomas Gleixner
2020-11-11 9:39 ` Thomas Gleixner
2020-11-06 11:45 ` Devin Bayer
2020-11-06 11:45 ` Devin Bayer
2020-11-09 18:48 ` Kalle Valo
2020-11-09 18:48 ` Kalle Valo
2020-11-03 11:20 ` Devin Bayer
2020-11-03 11:20 ` Devin Bayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2849fd39-a7a6-8366-7c78-fc9fec4dffa4@posteo.de \
--to=thomaskrause@posteo.de \
--cc=ath11k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.