From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from perceval.ideasonboard.com ([95.142.166.194]:56382 "EHLO perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756051Ab2FYNSl (ORCPT ); Mon, 25 Jun 2012 09:18:41 -0400 From: Laurent Pinchart To: Hans Verkuil Cc: davinci-linux-open-source@linux.davincidsp.com, Manjunath Hadli , LMML Subject: Re: [PATCH v3 08/13] davinci: vpif: add support for clipping on output data Date: Mon, 25 Jun 2012 15:18:41 +0200 Message-ID: <2866335.LkvUDJ0OzN@avalon> In-Reply-To: <201206251508.10347.hverkuil@xs4all.nl> References: <1340622455-10419-1-git-send-email-manjunath.hadli@ti.com> <2408615.OIAyvZB6Tt@avalon> <201206251508.10347.hverkuil@xs4all.nl> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-media-owner@vger.kernel.org List-ID: Hi Hans, On Monday 25 June 2012 15:08:10 Hans Verkuil wrote: > On Mon 25 June 2012 14:54:39 Laurent Pinchart wrote: > > On Monday 25 June 2012 16:37:30 Manjunath Hadli wrote: > > > add hardware clipping support for VPIF output data. This > > > is needed as it is possible that the external encoder > > > might get confused between the FF or 00 which are a part > > > of the data and that of the SAV or EAV codes. > > > > > > Signed-off-by: Manjunath Hadli > > > Signed-off-by: Lad, Prabhakar > > > --- > > > > > > drivers/media/video/davinci/vpif.h | 30 +++++++++++++++++++++ > > > drivers/media/video/davinci/vpif_display.c | 10 +++++++++ > > > include/media/davinci/vpif_types.h | 2 + > > > 3 files changed, 42 insertions(+), 0 deletions(-) > > > > > > diff --git a/drivers/media/video/davinci/vpif.h > > > b/drivers/media/video/davinci/vpif.h index a4d2141..c2ce4d9 100644 > > > --- a/drivers/media/video/davinci/vpif.h > > > +++ b/drivers/media/video/davinci/vpif.h > > > @@ -211,6 +211,12 @@ static inline void vpif_clr_bit(u32 reg, u32 bit) > > > > > > #define VPIF_CH3_INT_CTRL_SHIFT (6) > > > #define VPIF_CH_INT_CTRL_SHIFT (6) > > > > > > +#define VPIF_CH2_CLIP_ANC_EN 14 > > > +#define VPIF_CH2_CLIP_ACTIVE_EN 13 > > > + > > > +#define VPIF_CH3_CLIP_ANC_EN 14 > > > +#define VPIF_CH3_CLIP_ACTIVE_EN 13 > > > + > > > > > > /* enabled interrupt on both the fields on vpid_ch0_ctrl register */ > > > #define channel0_intr_assert() (regw((regr(VPIF_CH0_CTRL)|\ > > > > > > (VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL)) > > > > > > @@ -515,6 +521,30 @@ static inline void channel3_raw_enable(int enable, > > > u8 > > > index) vpif_clr_bit(VPIF_CH3_CTRL, mask); > > > > > > } > > > > > > +/* function to enable clipping (for both active and blanking regions) > > > on ch 2 */ +static inline void channel2_clipping_enable(int enable) > > > +{ > > > + if (enable) { > > > + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN); > > > + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN); > > > + } else { > > > + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN); > > > + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN); > > > + } > > > +} > > > + > > > +/* function to enable clipping (for both active and blanking regions) > > > on ch 2 */ +static inline void channel3_clipping_enable(int enable) > > > +{ > > > + if (enable) { > > > + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN); > > > + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN); > > > + } else { > > > + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN); > > > + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN); > > > + } > > > +} > > > + > > > > > > /* inline function to set buffer addresses in case of Y/C non mux mode > > > */ > > > static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long > > > > > > top_strt_luma, unsigned long btm_strt_luma, > > > diff --git a/drivers/media/video/davinci/vpif_display.c > > > b/drivers/media/video/davinci/vpif_display.c index 61ea8bc..4436ef6 > > > 100644 > > > --- a/drivers/media/video/davinci/vpif_display.c > > > +++ b/drivers/media/video/davinci/vpif_display.c > > > @@ -1046,6 +1046,8 @@ static int vpif_streamon(struct file *file, void > > > *priv, channel2_intr_assert(); > > > > > > channel2_intr_enable(1); > > > enable_channel2(1); > > > > > > + if (vpif_config_data->ch2_clip_en) > > > + channel2_clipping_enable(1); > > > > > > } > > > > > > if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) > > > > > > @@ -1053,6 +1055,8 @@ static int vpif_streamon(struct file *file, void > > > *priv, channel3_intr_assert(); > > > > > > channel3_intr_enable(1); > > > enable_channel3(1); > > > > > > + if (vpif_config_data->ch3_clip_en) > > > + channel3_clipping_enable(1); > > > > > > } > > > channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; > > > > > > } > > > > > > @@ -1065,6 +1069,8 @@ static int vpif_streamoff(struct file *file, void > > > *priv, struct vpif_fh *fh = priv; > > > > > > struct channel_obj *ch = fh->channel; > > > struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; > > > > > > + struct vpif_display_config *vpif_config_data = > > > + vpif_dev->platform_data; > > > > > > if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { > > > > > > vpif_err("buffer type not supported\n"); > > > > > > @@ -1084,11 +1090,15 @@ static int vpif_streamoff(struct file *file, > > > void > > > *priv, if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { > > > > > > /* disable channel */ > > > if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { > > > > > > + if (vpif_config_data->ch2_clip_en) > > > + channel2_clipping_enable(0); > > > > > > enable_channel2(0); > > > channel2_intr_enable(0); > > > > > > } > > > if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || > > > > > > (2 == common->started)) { > > > > > > + if (vpif_config_data->ch3_clip_en) > > > + channel3_clipping_enable(0); > > > > > > enable_channel3(0); > > > channel3_intr_enable(0); > > > > > > } > > > > > > diff --git a/include/media/davinci/vpif_types.h > > > b/include/media/davinci/vpif_types.h index bd8217c..d8f6ab1 100644 > > > --- a/include/media/davinci/vpif_types.h > > > +++ b/include/media/davinci/vpif_types.h > > > @@ -50,6 +50,8 @@ struct vpif_display_config { > > > > > > const char **output; > > > int output_count; > > > const char *card_name; > > > > > > + bool ch2_clip_en; > > > + bool ch3_clip_en; > > > > Instead of hardcoding this in platform data, I think it would be better to > > make this runtime-configurable. One option is to use the value of the > > v4l2_pix_format::colorspace field configured by userspace. We already have > > V4L2_COLORSPACE_JPEG which maps to the full 0-255 range, but we're missing > > a colorspace for the clipped 1-254 range used by the VPIF and I'm not > > sure whether it would really make sense to add one. Another option is to > > use a V4L2 control. > > This is something for a V4L2 control I think since clipping is colorspace > independent (you have the same situation for e.g. YCbCr). But some colorspaces define ranges smaller than 0-255. In this particular case I agree with you though, as the hardware clips to 1-255 without taking colorspaces into account. -- Regards, Laurent Pinchart