Re: [meta-freescale] Cannot run "devtool mofidy linux-fslc" in Dunfell branch

Re: [meta-freescale] Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[Ks89]

[-- Attachment #1: Type: text/plain, Size: 3165 bytes --]

I'm still having the same issue. I cannot run devtool modify linux-fslc.
I'm using dunfell with imx6ullevk.



Il mar 4 ago 2020, 16:27 Ks89 via lists.yoctoproject.org
<stefano.cappa.ks89=gmail.com@lists.yoctoproject.org> ha scritto:

> [Edited Message Follows]
> [Reason: remove quoted log]
> Hi,
> If I build my image based on imx6ullevk with linux-fslc everything works
> fine,
> but when I run "devtool modify linux-fslc" it throws this error:
>
> NOTE: Executing Tasks
> ERROR: Execution of
> '/home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615'
> failed with exit code 2:
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615:
> 120:
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615:
> cannot open
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/workdir/defconfig:
> No such file
> WARNING: exit code 2 from a shell command.
>
> ERROR: Logfile of failure stored in:
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/log.do_preconfigure.20615
> Log data follows:
> | DEBUG: Executing shell function do_preconfigure
> |
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615:
> 120:
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615:
> cannot open
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/workdir/defconfig:
> No such file
> | WARNING: exit code 2 from a shell command.
> | ERROR: Execution of
> '/home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615'
> failed with exit code 2:
> |
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615:
> 120:
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615:
> cannot open
> /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/workdir/defconfig:
> No such file
> | WARNING: exit code 2 from a shell command.
> |
> NOTE: Tasks Summary: Attempted 427 tasks of which 417 didn't need to be
> rerun and 1 failed.
> ERROR: Extracting source for linux-fslc faile
> 
>

[-- Attachment #2: Type: text/html, Size: 3675 bytes --]

Re: Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[bartvanderlaan]

[-- Attachment #1: Type: text/plain, Size: 986 bytes --]

Hi, I'm facing the exact same issue. This is the ("same") message after updating to 5.4.72 on poky 3.2 to see if that would resolve the issue.

ERROR: Execution of '/home/user/project/build/tmp/work/imx7d_pico-poky-linux-gnueabi/linux-fslc/5.4.72+gitAUTOINC+3bd0fd4e0f-r0/devtooltmp-l63mos0r/temp/run.do_preconfigure.32540' failed with exit code 2:
/home/user/project/build/tmp/work/imx7d_pico-poky-linux-gnueabi/linux-fslc/5.4.72+gitAUTOINC+3bd0fd4e0f-r0/devtooltmp-l63mos0r/temp/run.do_preconfigure.32540: 160: /home/user/project/build/tmp/work/imx7d_pico-poky-linux-gnueabi/linux-fslc/5.4.72+gitAUTOINC+3bd0fd4e0f-r0/devtooltmp-l63mos0r/temp/run.do_preconfigure.32540: cannot open /home/user/project/build/tmp/work/imx7d_pico-poky-linux-gnueabi/linux-fslc/5.4.72+gitAUTOINC+3bd0fd4e0f-r0/devtooltmp-l63mos0r/workdir/defconfig: No such file
WARNING: exit code 2 from a shell command.

Would one of you be so kind to give me some pointers where to start resolving this? Thanks!

[-- Attachment #2: Type: text/html, Size: 1010 bytes --]

Re: Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[sam.van.den.berge]

[-- Attachment #1: Type: text/plain, Size: 59 bytes --]

I also have the exact same error with linux-fslc 5.10.12.

[-- Attachment #2: Type: text/html, Size: 59 bytes --]

Re: [meta-freescale] Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[Andrey Zhizhikin]

Hello Sam,

On Mon, Feb 15, 2021 at 9:35 PM <sam.van.den.berge@gmail.com> wrote:
>
> I also have the exact same error with linux-fslc 5.10.12.

Can you try to change SRCBRANCH in
recipes-kernel/linux/linux-fslc_5.10.bb to KBRANCH? I've just tried it
out and it should solve the problem.

I have a patch for this and made a PR to address the issue, please
have a look at https://github.com/Freescale/meta-freescale/pull/652. I
would appreciate if you test it locally on your end and report here if
that solves your devtool errors.


> 
>

--
Regards,
Andrey.

Re: [meta-freescale] Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[svdb]

On Mon, Feb 15, 2021 at 11:10 PM Andrey Zhizhikin <andrey.z@gmail.com> wrote:
>
> Hello Sam,
>
> On Mon, Feb 15, 2021 at 9:35 PM <sam.van.den.berge@gmail.com> wrote:
> >
> > I also have the exact same error with linux-fslc 5.10.12.
>
> Can you try to change SRCBRANCH in
> recipes-kernel/linux/linux-fslc_5.10.bb to KBRANCH? I've just tried it
> out and it should solve the problem.
>
> I have a patch for this and made a PR to address the issue, please
> have a look at https://github.com/Freescale/meta-freescale/pull/652. I
> would appreciate if you test it locally on your end and report here if
> that solves your devtool errors.

Unfortunately it's not solved in my case. Depending on the path that
gets executed in
devtool/standard.py, I do think your patch does solve the issue in some cases.

>
>
> > 
> >
>
> --
> Regards,
> Andrey.

Re: [meta-freescale] Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[Andrey Zhizhikin]

Hello Sam,

On Tue, Feb 16, 2021 at 12:05 PM Sam Van Den Berge
<sam.van.den.berge@gmail.com> wrote:
>
> On Mon, Feb 15, 2021 at 11:10 PM Andrey Zhizhikin <andrey.z@gmail.com> wrote:
> >
> > Hello Sam,
> >
> > On Mon, Feb 15, 2021 at 9:35 PM <sam.van.den.berge@gmail.com> wrote:
> > >
> > > I also have the exact same error with linux-fslc 5.10.12.
> >
> > Can you try to change SRCBRANCH in
> > recipes-kernel/linux/linux-fslc_5.10.bb to KBRANCH? I've just tried it
> > out and it should solve the problem.
> >
> > I have a patch for this and made a PR to address the issue, please
> > have a look at https://github.com/Freescale/meta-freescale/pull/652. I
> > would appreciate if you test it locally on your end and report here if
> > that solves your devtool errors.
>
> Unfortunately it's not solved in my case. Depending on the path that
> gets executed in
> devtool/standard.py, I do think your patch does solve the issue in some cases.

Since linux-fslc[-imx] recipes are inheriting kernel-yocto class, it
is needed that the KBRANCH to be defined as it can be seen in
scripts/lib/devtool/standard.py on line 822.

Which particular error do you see when you apply the patch from PR?
Do you have any appends to the kernel recipe?
Which machine are you trying to build and which distro?

>
> >
> >
> > > 
> > >
> >
> > --
> > Regards,
> > Andrey.



-- 
Regards,
Andrey.

Re: [meta-freescale] Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[svdb]

On Tue, Feb 16, 2021 at 12:13 PM Andrey Zhizhikin <andrey.z@gmail.com> wrote:
>
> Hello Sam,
>
> On Tue, Feb 16, 2021 at 12:05 PM Sam Van Den Berge
> <sam.van.den.berge@gmail.com> wrote:
> >
> > On Mon, Feb 15, 2021 at 11:10 PM Andrey Zhizhikin <andrey.z@gmail.com> wrote:
> > >
> > > Hello Sam,
> > >
> > > On Mon, Feb 15, 2021 at 9:35 PM <sam.van.den.berge@gmail.com> wrote:
> > > >
> > > > I also have the exact same error with linux-fslc 5.10.12.
> > >
> > > Can you try to change SRCBRANCH in
> > > recipes-kernel/linux/linux-fslc_5.10.bb to KBRANCH? I've just tried it
> > > out and it should solve the problem.
> > >
> > > I have a patch for this and made a PR to address the issue, please
> > > have a look at https://github.com/Freescale/meta-freescale/pull/652. I
> > > would appreciate if you test it locally on your end and report here if
> > > that solves your devtool errors.
> >
> > Unfortunately it's not solved in my case. Depending on the path that
> > gets executed in
> > devtool/standard.py, I do think your patch does solve the issue in some cases.
>
> Since linux-fslc[-imx] recipes are inheriting kernel-yocto class, it
> is needed that the KBRANCH to be defined as it can be seen in
> scripts/lib/devtool/standard.py on line 822.
>
> Which particular error do you see when you apply the patch from PR?
> Do you have any appends to the kernel recipe?
> Which machine are you trying to build and which distro?
>

We have one small append to the kernel recipe but it's something with a dts. No
additional kernel configs or whatsoever. Machine is imx6q and distro
is an internal one.

I modified devtool a little bit so that it prints the variables from
line 822 and this is
what I get:

kernelVersion=5.10.12
kbranch=5.10.x+fslc
staging_kerVer=
staging_kbranch=

so in my case the if statement at line 822 is not True. I think this
is because we
do not clone the git repo but have extracted a tar.gz and we use that
as the source.
Not sure though...

As a result of the False if-statement,  _extract_source will be executed.
Then at line 607 it will start executing the configure task. At the
point the execution
reaches the do_preconfigure() from fsl-kernel-localversion.bbclass
while the file
defconfig is not in ${WORKDIR} but in the ${WORKDIR}/../oe-local-files folder.
As a result, the following command in the do_preconfigure() will fail:

sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${B}/.config'

This is the error I get:
DEBUG: Executing shell function do_preconfigure
..../linux-fslc/5.10.12+gitAUTOINC+ed3accb10c-r0/devtooltmp-otiy_odb/temp/run.do_preconfigure.3336084:
line 160: ...../devtooltmp-otiy_odb/workdir/defconfig: No such file or directory
WARNING: ..../devtooltmp-otiy_odb/temp/run.do_preconfigure.3336084:160
exit 1 from
'sed -e "${CONF_SED_SCRIPT}" <
..../devtooltmp-otiy_odb/workdir/defconfig' >>
'....devtooltmp-otiy_odb/workdir/build/.config''

The problem really is that devtool copies Non-patch files to an
oe-local-files folder,
in contrast to just running bitbake which puts both patch and
non-patch files in the
${WORKDIR}.

> --
> Regards,
> Andrey.

Re: [meta-freescale] Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[Andrey Zhizhikin]

Hello Sam,

On Tue, Feb 16, 2021 at 4:00 PM Sam Van Den Berge
<sam.van.den.berge@gmail.com> wrote:
>
> On Tue, Feb 16, 2021 at 12:13 PM Andrey Zhizhikin <andrey.z@gmail.com> wrote:
> >
> > Hello Sam,
> >
> > On Tue, Feb 16, 2021 at 12:05 PM Sam Van Den Berge
> > <sam.van.den.berge@gmail.com> wrote:
> > >
> > > On Mon, Feb 15, 2021 at 11:10 PM Andrey Zhizhikin <andrey.z@gmail.com> wrote:
> > > >
> > > > Hello Sam,
> > > >
> > > > On Mon, Feb 15, 2021 at 9:35 PM <sam.van.den.berge@gmail.com> wrote:
> > > > >
> > > > > I also have the exact same error with linux-fslc 5.10.12.
> > > >
> > > > Can you try to change SRCBRANCH in
> > > > recipes-kernel/linux/linux-fslc_5.10.bb to KBRANCH? I've just tried it
> > > > out and it should solve the problem.
> > > >
> > > > I have a patch for this and made a PR to address the issue, please
> > > > have a look at https://github.com/Freescale/meta-freescale/pull/652. I
> > > > would appreciate if you test it locally on your end and report here if
> > > > that solves your devtool errors.
> > >
> > > Unfortunately it's not solved in my case. Depending on the path that
> > > gets executed in
> > > devtool/standard.py, I do think your patch does solve the issue in some cases.
> >
> > Since linux-fslc[-imx] recipes are inheriting kernel-yocto class, it
> > is needed that the KBRANCH to be defined as it can be seen in
> > scripts/lib/devtool/standard.py on line 822.
> >
> > Which particular error do you see when you apply the patch from PR?
> > Do you have any appends to the kernel recipe?
> > Which machine are you trying to build and which distro?
> >
>
> We have one small append to the kernel recipe but it's something with a dts. No
> additional kernel configs or whatsoever. Machine is imx6q and distro
> is an internal one.
>
> I modified devtool a little bit so that it prints the variables from
> line 822 and this is
> what I get:
>
> kernelVersion=5.10.12
> kbranch=5.10.x+fslc
> staging_kerVer=
> staging_kbranch=
>
> so in my case the if statement at line 822 is not True. I think this
> is because we
> do not clone the git repo but have extracted a tar.gz and we use that
> as the source.
> Not sure though...

Can you try to use linux-fslc from the git repository instead of
tarball? If it is proven to be working - then the problem might be in
the implementation of devtool itself and should be taken upstream for
further investigations.

>
> As a result of the False if-statement,  _extract_source will be executed.
> Then at line 607 it will start executing the configure task. At the
> point the execution
> reaches the do_preconfigure() from fsl-kernel-localversion.bbclass
> while the file
> defconfig is not in ${WORKDIR} but in the ${WORKDIR}/../oe-local-files folder.
> As a result, the following command in the do_preconfigure() will fail:
>
> sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${B}/.config'
>
> This is the error I get:
> DEBUG: Executing shell function do_preconfigure
> ..../linux-fslc/5.10.12+gitAUTOINC+ed3accb10c-r0/devtooltmp-otiy_odb/temp/run.do_preconfigure.3336084:
> line 160: ...../devtooltmp-otiy_odb/workdir/defconfig: No such file or directory
> WARNING: ..../devtooltmp-otiy_odb/temp/run.do_preconfigure.3336084:160
> exit 1 from
> 'sed -e "${CONF_SED_SCRIPT}" <
> ..../devtooltmp-otiy_odb/workdir/defconfig' >>
> '....devtooltmp-otiy_odb/workdir/build/.config''
>
> The problem really is that devtool copies Non-patch files to an
> oe-local-files folder,
> in contrast to just running bitbake which puts both patch and
> non-patch files in the
> ${WORKDIR}.
>
> > --
> > Regards,
> > Andrey.



-- 
Regards,
Andrey.

Cannot run "devtool mofidy linux-fslc" in Dunfell branch

[Ks89]

[-- Attachment #1: Type: text/plain, Size: 2746 bytes --]

Hi,
If I build my image based on imx6ullevk with linux-fslc everything works fine,
but when I run "devtool modify linux-fslc" it throws this error:

NOTE: Executing Tasks
ERROR: Execution of '/home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615' failed with exit code 2:
/home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615: 120: /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615: cannot open /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/workdir/defconfig: No such file
WARNING: exit code 2 from a shell command.

ERROR: Logfile of failure stored in: /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/log.do_preconfigure.20615
Log data follows:
| DEBUG: Executing shell function do_preconfigure
| /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615: 120: /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615: cannot open /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/workdir/defconfig: No such file
| WARNING: exit code 2 from a shell command.
| ERROR: Execution of '/home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615' failed with exit code 2:
| /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615: 120: /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/temp/run.do_preconfigure.20615: cannot open /home/myuser/git/dunfell/poky/build/tmp/work/myproduct-poky-linux-gnueabi/linux-fslc/5.4.51+gitAUTOINC+d051c7c9af-r0/devtooltmp-mtebo5r_/workdir/defconfig: No such file
| WARNING: exit code 2 from a shell command.
|
NOTE: Tasks Summary: Attempted 427 tasks of which 417 didn't need to be rerun and 1 failed.
ERROR: Extracting source for linux-fslc faile

[-- Attachment #2: Type: text/html, Size: 2980 bytes --]