[U-Boot] [GIT PULL ] Please pull u-boot-mmc master

From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
Date: Tue, 20 Feb 2018 12:57:28 +0900	[thread overview]
Message-ID: <29797f45-a86c-2694-270c-afd4cc18f58e@samsung.com> (raw)
In-Reply-To: CGME20180220035728epcas2p152ee76e870ed334c7e91ef8d7ec0b699@epcas2p1.samsung.com

Dear Tom,

Could you pull these patches into u-boot/master?

The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:

  Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)

are available in the Git repository at:

  git://git.denx.de/u-boot-mmc.git master

for you to fetch changes up to 4a41fec589b5f57bc83fca423222c6a1860a50f5:

  mmc: Fix uninitialised priv member (2018-02-19 17:00:33 +0900)

----------------------------------------------------------------
Alex Kiernan (1):
      mmc: Fix uninitialised priv member

Jean-Jacques Hiblot (15):
      mmc: omap_hsmmc: cleanup clock configuration
      mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
      mmc: omap_hsmmc: Add tuning support
      mmc: omap_hsmmc: Workaround for errata id i802
      mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
      mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
      mmc: omap_hsmmc: update mmc->clock with the actual bus speed
      mmc: omap_hsmmc: implement send_init_stream callback
      mmc: omap_hsmmc: add signal voltage selection support
      ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
      dts: am57xx-beagle-x15: disable UHS and HS200 support
      dts: am57xx-idk: disable HS200 support
      configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support
      mmc: Fix bug in sd_set_card_speed()
      mmc: fix bug in mmc_startup_v4()

Kishon Vijay Abraham I (11):
      mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
      mmc: omap_hsmmc: add support to set default io voltage
      mmc: omap_hsmmc: Enable DDR mode support
      mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
      ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
      mmc: omap_hsmmc: Add support to set IODELAY values
      mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
      mmc: omap_hsmmc: allow mmc clock to be gated
      ARM: OMAP5: set mmc clock frequency to 192MHz
      ARM: dts: DRA7: use new dra7-specific compatible string
      ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1

Masahiro Yamada (1):
      mmc: use pr_* log functions

 arch/arm/dts/am57xx-beagle-x15.dts               |   6 +
 arch/arm/dts/am57xx-idk-common.dtsi              |   2 +
 arch/arm/dts/dra7.dtsi                           |  22 +-
 arch/arm/include/asm/arch-omap5/clock.h          |   2 +-
 arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h |   3 +
 arch/arm/include/asm/arch-omap5/sys_proto.h      |   7 +
 arch/arm/include/asm/omap_mmc.h                  |  59 +-
 arch/arm/mach-omap2/omap5/dra7xx_iodelay.c       |  30 +
 arch/arm/mach-omap2/omap5/hw_data.c              |  10 +-
 board/ti/am57xx/board.c                          |  30 +
 board/ti/dra7xx/evm.c                            |  29 +
 configs/dra7xx_evm_defconfig                     |   3 +
 configs/dra7xx_hs_evm_defconfig                  |   3 +
 drivers/mmc/mmc.c                                |  71 +-
 drivers/mmc/omap_hsmmc.c                         | 954 +++++++++++++++++++++--
 include/configs/am57xx_evm.h                     |   2 -
 include/configs/dra7xx_evm.h                     |   2 -
 include/mmc.h                                    |   1 +
 18 files changed, 1125 insertions(+), 111 deletions(-)

Best Regards,
Jaehoon Chung