While I wait for access to the system for serial debugging, I am suspecting
probably .config file used to build kernel might be wrong. Is there a
reference .config file for 32bit xen/next which I could compare with?

Thanks

On Mon, Mar 22, 2010 at 1:58 AM, Pasi Kärkkäinen <pasik@iki.fi> wrote:

> On Sun, Mar 21, 2010 at 02:21:31PM -0700, Ritu kaur wrote:
> >    Thanks Pasi, I did look into debugging via serial console yesterday,
> >    system is rack mounted and currently not a viable option for me since
> it
> >    requires admin approval, I am looking into this. Aside from that, I
> >    believe xen/next should work with xcp 0.1.1 i.e
> >
> >    1. xen 3.4.3.gz, xen/next kernel. Take tar-pkg built from xen/next,
> untar
> >    it in xcp0.1.1 dom0, modify extlinux.conf to boot from 3.4.3 and new
> >    kernel. will this work?
> >
>
> It should, assuming you don't have some incompatibility with xen/next and
> your hardware.
> You might also want to try xen 4.0.0 instead of 3.4.3!
>
> But anyway it's best to use the serial console, or SOL (Serial-Over-Lan) to
> capture
> the boot messages, so we can actually SEE what's the problem.
>
> -- Pasi
>
>