From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] final round of SCSI updates for the 5.18+ merge window
Date: Sat, 04 Jun 2022 13:13:13 -0400 [thread overview]
Message-ID: <29ba89f60e3b9ff457056b79f3b9d86c8a4b1c48.camel@HansenPartnership.com> (raw)
Mostly small bug fixes plus other trivial updates. The major change of
note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Bart Van Assche (1):
scsi: ufs: Split the drivers/scsi/ufs directory
Bradley Grove (1):
scsi: lpfc: Add support for ATTO Fibre Channel devices
Christoph Hellwig (2):
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
Colin Ian King (1):
scsi: qla1280: Remove redundant variable
Damien Le Moal (2):
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
Dan Carpenter (1):
scsi: ufs: ufshcd: Delete unnecessary NULL check
Gleb Chesnokov (1):
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
Hannes Reinecke (2):
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: myrb: Fix up null pointer access on myrb_cleanup()
James Smart (3):
scsi: lpfc: Add support for VMID tagging of NVMe I/Os
scsi: lpfc: Rework lpfc_vmid_get_appid() to be protocol independent
scsi: lpfc: Commonize VMID code location
Jiapeng Chong (1):
scsi: mpi3mr: Fix kernel-doc
Julia Lawall (6):
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
Muneendra Kumar (1):
scsi: nvme-fc: Add new routine nvme_fc_io_getuuid()
Sumit Saxena (1):
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
Tom Rix (1):
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
And the diffstat:
MAINTAINERS | 10 +-
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/nvme/host/fc.c | 18 ++
drivers/scsi/Kconfig | 1 -
drivers/scsi/Makefile | 1 -
drivers/scsi/esas2r/esas2r_flash.c | 2 +-
drivers/scsi/isci/request.c | 2 +-
drivers/scsi/lpfc/Makefile | 2 +-
drivers/scsi/lpfc/lpfc_crtn.h | 3 +
drivers/scsi/lpfc/lpfc_hw.h | 22 ++
drivers/scsi/lpfc/lpfc_ids.h | 30 +++
drivers/scsi/lpfc/lpfc_init.c | 89 +++++++
drivers/scsi/lpfc/lpfc_nvme.c | 45 ++++
drivers/scsi/lpfc/lpfc_scsi.c | 263 +------------------
drivers/scsi/lpfc/lpfc_vmid.c | 288 +++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr.h | 2 +-
drivers/scsi/mpi3mr/mpi3mr_app.c | 50 ++--
drivers/scsi/myrb.c | 11 +-
drivers/scsi/pmcraid.c | 2 +-
drivers/scsi/qedf/qedf_io.c | 2 +-
drivers/scsi/qla1280.c | 3 +-
drivers/scsi/qla2xxx/qla_mid.c | 2 -
drivers/scsi/qla2xxx/qla_target.c | 7 -
drivers/scsi/scsi_lib.c | 2 +-
drivers/scsi/scsi_sysfs.c | 1 -
drivers/scsi/sd.c | 5 +-
drivers/scsi/sd.h | 4 +-
drivers/scsi/sd_zbc.c | 26 +-
drivers/scsi/smartpqi/smartpqi.h | 2 +-
drivers/scsi/storvsc_drv.c | 2 +-
drivers/ufs/Kconfig | 30 +++
drivers/ufs/Makefile | 5 +
drivers/ufs/core/Kconfig | 60 +++++
drivers/ufs/core/Makefile | 10 +
drivers/{scsi/ufs => ufs/core}/ufs-debugfs.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs-debugfs.h | 0
.../{scsi/ufs => ufs/core}/ufs-fault-injection.c | 0
.../{scsi/ufs => ufs/core}/ufs-fault-injection.h | 0
drivers/{scsi/ufs => ufs/core}/ufs-hwmon.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs-sysfs.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs-sysfs.h | 0
drivers/{scsi/ufs => ufs/core}/ufs_bsg.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs_bsg.h | 0
drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.h | 4 +-
drivers/{scsi/ufs => ufs/core}/ufshcd-priv.h | 2 +-
drivers/{scsi/ufs => ufs/core}/ufshcd.c | 9 +-
drivers/{scsi/ufs => ufs/core}/ufshpb.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufshpb.h | 0
drivers/{scsi/ufs => ufs/host}/Kconfig | 75 +-----
drivers/{scsi/ufs => ufs/host}/Makefile | 12 -
drivers/{scsi/ufs => ufs/host}/cdns-pltfrm.c | 0
drivers/{scsi/ufs => ufs/host}/tc-dwc-g210-pci.c | 2 +-
.../{scsi/ufs => ufs/host}/tc-dwc-g210-pltfrm.c | 0
drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.c | 4 +-
drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.h | 0
drivers/{scsi/ufs => ufs/host}/ti-j721e-ufs.c | 0
drivers/{scsi/ufs => ufs/host}/ufs-exynos.c | 6 +-
drivers/{scsi/ufs => ufs/host}/ufs-exynos.h | 0
drivers/{scsi/ufs => ufs/host}/ufs-hisi.c | 8 +-
drivers/{scsi/ufs => ufs/host}/ufs-hisi.h | 0
.../{scsi/ufs => ufs/host}/ufs-mediatek-trace.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufs-mediatek.c | 6 +-
drivers/{scsi/ufs => ufs/host}/ufs-mediatek.h | 0
drivers/{scsi/ufs => ufs/host}/ufs-qcom-ice.c | 0
drivers/{scsi/ufs => ufs/host}/ufs-qcom.c | 8 +-
drivers/{scsi/ufs => ufs/host}/ufs-qcom.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.c | 4 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-pci.c | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.c | 4 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshci-dwc.h | 0
include/linux/nvme-fc-driver.h | 14 +
{drivers/scsi => include}/ufs/ufs.h | 0
{drivers/scsi => include}/ufs/ufs_quirks.h | 0
{drivers/scsi => include}/ufs/ufshcd.h | 8 +-
{drivers/scsi => include}/ufs/ufshci.h | 0
{drivers/scsi => include}/ufs/unipro.h | 0
80 files changed, 728 insertions(+), 465 deletions(-)
create mode 100644 drivers/scsi/lpfc/lpfc_vmid.c
create mode 100644 drivers/ufs/Kconfig
create mode 100644 drivers/ufs/Makefile
create mode 100644 drivers/ufs/core/Kconfig
create mode 100644 drivers/ufs/core/Makefile
rename drivers/{scsi/ufs => ufs/core}/ufs-debugfs.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs-debugfs.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs-fault-injection.c (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs-fault-injection.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs-hwmon.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs-sysfs.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs-sysfs.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs_bsg.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs_bsg.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.h (97%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd-priv.h (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshpb.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshpb.h (100%)
rename drivers/{scsi/ufs => ufs/host}/Kconfig (56%)
rename drivers/{scsi/ufs => ufs/host}/Makefile (56%)
rename drivers/{scsi/ufs => ufs/host}/cdns-pltfrm.c (100%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210-pci.c (99%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210-pltfrm.c (100%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.c (99%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ti-j721e-ufs.c (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-exynos.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-exynos.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-hisi.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-hisi.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-mediatek-trace.h (93%)
rename drivers/{scsi/ufs => ufs/host}/ufs-mediatek.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-mediatek.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-qcom-ice.c (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-qcom.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-qcom.h (99%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.c (98%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.h (95%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-pci.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.h (98%)
rename drivers/{scsi/ufs => ufs/host}/ufshci-dwc.h (100%)
rename {drivers/scsi => include}/ufs/ufs.h (100%)
rename {drivers/scsi => include}/ufs/ufs_quirks.h (100%)
rename {drivers/scsi => include}/ufs/ufshcd.h (99%)
rename {drivers/scsi => include}/ufs/ufshci.h (100%)
rename {drivers/scsi => include}/ufs/unipro.h (100%)
James
next reply other threads:[~2022-06-04 17:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-04 17:13 James Bottomley [this message]
2022-06-05 17:16 ` [GIT PULL] final round of SCSI updates for the 5.18+ merge window pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29ba89f60e3b9ff457056b79f3b9d86c8a4b1c48.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.