All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fengnan Chang <changfengnan@vivo.com>
To: jaegeuk@kernel.org, chao@kernel.org,
	linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH v6] f2fs: compress: add nocompress extensions support
Date: Tue, 15 Jun 2021 19:31:50 +0800	[thread overview]
Message-ID: <29d11696-dc9d-75c5-037c-0c2d21c4e464@vivo.com> (raw)
In-Reply-To: <20210608111508.162249-1-changfengnan@vivo.com>

Hi:
   Any comments about this version?

Thanks.


On 2021/6/8 19:15, Fengnan Chang wrote:
> When we create a directory with enable compression, all file write into
> directory will try to compress.But sometimes we may know, new file
> cannot meet compression ratio requirements.
> We need a nocompress extension to skip those files to avoid unnecessary
> compress page test.
> 
> After add nocompress_extension, the priority should be:
> dir_flag < comp_extention,nocompress_extension < comp_file_flag,
> no_comp_file_flag.
> 
> Priority in between FS_COMPR_FL, FS_NOCOMP_FS, extensions:
>     * compress_extension=so; nocompress_extension=zip; chattr +c dir;
>       touch dir/foo.so; touch dir/bar.zip; touch dir/baz.txt; then foo.so
>       and baz.txt should be compresse, bar.zip should be non-compressed.
>       chattr +c dir/bar.zip can enable compress on bar.zip.
>     * compress_extension=so; nocompress_extension=zip; chattr -c dir;
>       touch dir/foo.so; touch dir/bar.zip; touch dir/baz.txt; then foo.so
>       should be compresse, bar.zip and baz.txt should be non-compressed.
>       chattr+c dir/bar.zip; chattr+c dir/baz.txt; can enable compress on
>       bar.zip and baz.txt.
> 
> Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
> ---
>   Documentation/filesystems/f2fs.rst | 31 +++++++++++-
>   fs/f2fs/f2fs.h                     |  2 +
>   fs/f2fs/namei.c                    | 18 +++++--
>   fs/f2fs/super.c                    | 79 +++++++++++++++++++++++++++++-
>   4 files changed, 125 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst
> index 992bf91eeec8..c68f1c822665 100644
> --- a/Documentation/filesystems/f2fs.rst
> +++ b/Documentation/filesystems/f2fs.rst
> @@ -281,6 +281,18 @@ compress_extension=%s	 Support adding specified extension, so that f2fs can enab
>   			 For other files, we can still enable compression via ioctl.
>   			 Note that, there is one reserved special extension '*', it
>   			 can be set to enable compression for all files.
> +nocompress_extension=%s	   Support adding specified extension, so that f2fs can disable
> +			 compression on those corresponding files, just contrary to compression extension.
> +			 If you know exactly which files cannot be compressed, you can use this.
> +			 The same extension name can't appear in both compress and nocompress
> +			 extension at the same time.
> +			 If the compress extension specifies all files, the types specified by the
> +			 nocompress extension will be treated as special cases and will not be compressed.
> +			 Don't allow use '*' to specifie all file in nocompress extension.
> +			 After add nocompress_extension, the priority should be:
> +			 dir_flag < comp_extention,nocompress_extension < comp_file_flag,no_comp_file_flag.
> +			 See more in compression sections.
> +
>   compress_chksum		 Support verifying chksum of raw data in compressed cluster.
>   compress_mode=%s	 Control file compression mode. This supports "fs" and "user"
>   			 modes. In "fs" mode (default), f2fs does automatic compression
> @@ -814,13 +826,30 @@ Compression implementation
>     all logical blocks in cluster contain valid data and compress ratio of
>     cluster data is lower than specified threshold.
>   
> -- To enable compression on regular inode, there are three ways:
> +- To enable compression on regular inode, there are four ways:
>   
>     * chattr +c file
>     * chattr +c dir; touch dir/file
>     * mount w/ -o compress_extension=ext; touch file.ext
>     * mount w/ -o compress_extension=*; touch any_file
>   
> +- To disable compression on regular inode, there are two ways:
> +
> +  * chattr -c file
> +  * mount w/ -o nocompress_extension=ext; touch file.ext
> +
> +- Priority in between FS_COMPR_FL, FS_NOCOMP_FS, extensions:
> +
> +  * compress_extension=so; nocompress_extension=zip; chattr +c dir; touch
> +    dir/foo.so; touch dir/bar.zip; touch dir/baz.txt; then foo.so and baz.txt
> +    should be compresse, bar.zip should be non-compressed. chattr +c dir/bar.zip
> +    can enable compress on bar.zip.
> +  * compress_extension=so; nocompress_extension=zip; chattr -c dir; touch
> +    dir/foo.so; touch dir/bar.zip; touch dir/baz.txt; then foo.so should be
> +    compresse, bar.zip and baz.txt should be non-compressed.
> +    chattr+c dir/bar.zip; chattr+c dir/baz.txt; can enable compress on bar.zip
> +    and baz.txt.
> +
>   - At this point, compression feature doesn't expose compressed space to user
>     directly in order to guarantee potential data updates later to the space.
>     Instead, the main goal is to reduce data writes to flash disk as much as
> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> index 9ad502f92529..7d13d4d64d59 100644
> --- a/fs/f2fs/f2fs.h
> +++ b/fs/f2fs/f2fs.h
> @@ -150,8 +150,10 @@ struct f2fs_mount_info {
>   	unsigned char compress_level;		/* compress level */
>   	bool compress_chksum;			/* compressed data chksum */
>   	unsigned char compress_ext_cnt;		/* extension count */
> +	unsigned char nocompress_ext_cnt;		/* nocompress extension count */
>   	int compress_mode;			/* compression mode */
>   	unsigned char extensions[COMPRESS_EXT_NUM][F2FS_EXTENSION_LEN];	/* extensions */
> +	unsigned char noextensions[COMPRESS_EXT_NUM][F2FS_EXTENSION_LEN]; /* extensions */
>   };
>   
>   #define F2FS_FEATURE_ENCRYPT		0x0001
> diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
> index d4139e166b95..f343842da4f3 100644
> --- a/fs/f2fs/namei.c
> +++ b/fs/f2fs/namei.c
> @@ -287,14 +287,16 @@ static void set_compress_inode(struct f2fs_sb_info *sbi, struct inode *inode,
>   						const unsigned char *name)
>   {
>   	__u8 (*extlist)[F2FS_EXTENSION_LEN] = sbi->raw_super->extension_list;
> +	unsigned char (*noext)[F2FS_EXTENSION_LEN] = F2FS_OPTION(sbi).noextensions;
>   	unsigned char (*ext)[F2FS_EXTENSION_LEN];
> -	unsigned int ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
> +	unsigned char ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
> +	unsigned char noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
>   	int i, cold_count, hot_count;
>   
>   	if (!f2fs_sb_has_compression(sbi) ||
> -			is_inode_flag_set(inode, FI_COMPRESSED_FILE) ||
>   			F2FS_I(inode)->i_flags & F2FS_NOCOMP_FL ||
> -			!f2fs_may_compress(inode))
> +			!f2fs_may_compress(inode) ||
> +			(!ext_cnt && !noext_cnt))
>   		return;
>   
>   	down_read(&sbi->sb_lock);
> @@ -311,6 +313,16 @@ static void set_compress_inode(struct f2fs_sb_info *sbi, struct inode *inode,
>   
>   	up_read(&sbi->sb_lock);
>   
> +	for (i = 0; i < noext_cnt; i++) {
> +		if (is_extension_exist(name, noext[i])) {
> +			f2fs_disable_compressed_file(inode);
> +			return;
> +		}
> +	}
> +
> +	if (is_inode_flag_set(inode, FI_COMPRESSED_FILE))
> +		return;
> +
>   	ext = F2FS_OPTION(sbi).extensions;
>   
>   	for (i = 0; i < ext_cnt; i++) {
> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> index 6788e7b71e27..e720323b900c 100644
> --- a/fs/f2fs/super.c
> +++ b/fs/f2fs/super.c
> @@ -148,6 +148,7 @@ enum {
>   	Opt_compress_algorithm,
>   	Opt_compress_log_size,
>   	Opt_compress_extension,
> +	Opt_nocompress_extension,
>   	Opt_compress_chksum,
>   	Opt_compress_mode,
>   	Opt_atgc,
> @@ -222,6 +223,7 @@ static match_table_t f2fs_tokens = {
>   	{Opt_compress_algorithm, "compress_algorithm=%s"},
>   	{Opt_compress_log_size, "compress_log_size=%u"},
>   	{Opt_compress_extension, "compress_extension=%s"},
> +	{Opt_nocompress_extension, "nocompress_extension=%s"},
>   	{Opt_compress_chksum, "compress_chksum"},
>   	{Opt_compress_mode, "compress_mode=%s"},
>   	{Opt_atgc, "atgc"},
> @@ -473,6 +475,43 @@ static int f2fs_set_test_dummy_encryption(struct super_block *sb,
>   }
>   
>   #ifdef CONFIG_F2FS_FS_COMPRESSION
> +/*
> + * 1. The same extension name cannot not appear in both compress and non-compress extension
> + * at the same time.
> + * 2. If the compress extension specifies all files, the types specified by the non-compress
> + * extension will be treated as special cases and will not be compressed.
> + * 3. Don't allow the non-compress extension specifies all files.
> + */
> +static int f2fs_test_compress_extension(struct f2fs_sb_info *sbi)
> +{
> +	unsigned char (*ext)[F2FS_EXTENSION_LEN];
> +	unsigned char (*noext)[F2FS_EXTENSION_LEN];
> +	int ext_cnt, noext_cnt, index = 0, no_index = 0;
> +
> +	ext = F2FS_OPTION(sbi).extensions;
> +	ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
> +	noext = F2FS_OPTION(sbi).noextensions;
> +	noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
> +
> +	if (!noext_cnt)
> +		return 0;
> +
> +	for (no_index = 0; no_index < noext_cnt; no_index++) {
> +		if (!strcasecmp("*", noext[no_index])) {
> +			f2fs_info(sbi, "Don't allow the nocompress extension specifies all files");
> +			return -EINVAL;
> +		}
> +		for (index = 0; index < ext_cnt; index++) {
> +			if (!strcasecmp(ext[index], noext[no_index])) {
> +				f2fs_info(sbi, "Don't allow the same extension %s appear in both compress and nocompress extension",
> +						ext[index]);
> +				return -EINVAL;
> +			}
> +		}
> +	}
> +	return 0;
> +}
> +
>   #ifdef CONFIG_F2FS_FS_LZ4
>   static int f2fs_set_lz4hc_level(struct f2fs_sb_info *sbi, const char *str)
>   {
> @@ -546,7 +585,8 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>   	substring_t args[MAX_OPT_ARGS];
>   #ifdef CONFIG_F2FS_FS_COMPRESSION
>   	unsigned char (*ext)[F2FS_EXTENSION_LEN];
> -	int ext_cnt;
> +	unsigned char (*noext)[F2FS_EXTENSION_LEN];
> +	int ext_cnt, noext_cnt;
>   #endif
>   	char *p, *name;
>   	int arg = 0;
> @@ -1049,6 +1089,30 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>   			F2FS_OPTION(sbi).compress_ext_cnt++;
>   			kfree(name);
>   			break;
> +		case Opt_nocompress_extension:
> +			if (!f2fs_sb_has_compression(sbi)) {
> +				f2fs_info(sbi, "Image doesn't support compression");
> +				break;
> +			}
> +			name = match_strdup(&args[0]);
> +			if (!name)
> +				return -ENOMEM;
> +
> +			noext = F2FS_OPTION(sbi).noextensions;
> +			noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
> +
> +			if (strlen(name) >= F2FS_EXTENSION_LEN ||
> +				noext_cnt >= COMPRESS_EXT_NUM) {
> +				f2fs_err(sbi,
> +					"invalid extension length/number");
> +				kfree(name);
> +				return -EINVAL;
> +			}
> +
> +			strcpy(noext[noext_cnt], name);
> +			F2FS_OPTION(sbi).nocompress_ext_cnt++;
> +			kfree(name);
> +			break;
>   		case Opt_compress_chksum:
>   			F2FS_OPTION(sbi).compress_chksum = true;
>   			break;
> @@ -1070,6 +1134,7 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>   		case Opt_compress_algorithm:
>   		case Opt_compress_log_size:
>   		case Opt_compress_extension:
> +		case Opt_nocompress_extension:
>   		case Opt_compress_chksum:
>   		case Opt_compress_mode:
>   			f2fs_info(sbi, "compression options not supported");
> @@ -1123,6 +1188,13 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>   	}
>   #endif
>   
> +#ifdef CONFIG_F2FS_FS_COMPRESSION
> +	if (f2fs_test_compress_extension(sbi)) {
> +		f2fs_err(sbi, "invalid compress or nocompress extension");
> +		return -EINVAL;
> +	}
> +#endif
> +
>   	if (F2FS_IO_SIZE_BITS(sbi) && !f2fs_lfs_mode(sbi)) {
>   		f2fs_err(sbi, "Should set mode=lfs with %uKB-sized IO",
>   			 F2FS_IO_SIZE_KB(sbi));
> @@ -1671,6 +1743,11 @@ static inline void f2fs_show_compress_options(struct seq_file *seq,
>   			F2FS_OPTION(sbi).extensions[i]);
>   	}
>   
> +	for (i = 0; i < F2FS_OPTION(sbi).nocompress_ext_cnt; i++) {
> +		seq_printf(seq, ",nocompress_extension=%s",
> +			F2FS_OPTION(sbi).noextensions[i]);
> +	}
> +
>   	if (F2FS_OPTION(sbi).compress_chksum)
>   		seq_puts(seq, ",compress_chksum");
>   
> 


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

  reply	other threads:[~2021-06-15 11:32 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-08 11:15 [f2fs-dev] [PATCH v6] f2fs: compress: add nocompress extensions support Fengnan Chang via Linux-f2fs-devel
2021-06-15 11:31 ` Fengnan Chang [this message]
2021-06-21  3:37 ` Fengnan Chang
2021-07-01  3:30   ` Fengnan Chang
2021-07-01 14:48     ` Chao Yu
2021-07-01 16:57       ` Jaegeuk Kim
2021-07-01 22:41         ` Chao Yu
2021-07-02  1:36           ` Jaegeuk Kim
2021-07-03  0:50             ` Chao Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=29d11696-dc9d-75c5-037c-0c2d21c4e464@vivo.com \
    --to=changfengnan@vivo.com \
    --cc=chao@kernel.org \
    --cc=jaegeuk@kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.