Hi, All This is the weekly test report for Yocto 1.1 20110624 build. There are six new bugs found in this testing. Both sato and sato-sdk for Qemux86 and Qemux84-64 were build successfully on autobuilder, and all mete-intel BSPs are validated too. Mkswap failed when installation on emenlow/blacksand/crownbay. X server failed to start up on Crownbay-emgd. Qemuppc lsb-sdk rootfs image and qemumips lsb-sdk image build failed on autobuilder in nightly build. And mmci-omap-hs failed when boot up with current build. Rpm/zypper install/remove consume disk space issue still exist in this build. No icons shown on X desktop with Qemux86-64 sato and sato-sdk. After upgrade the BIOS/firmware, standby issue on Blacksand not reappear. For bug fixing, autobuilder build issues about lsb/sato-sdk/toolchain images are fixed. You can access the wiki page @ https://wiki.pokylinux.org/wiki/Yocto_1.1_Weekly_Test_Report Test Summary: --------------------------------------- Test Result Summary Component Target Status Comments BSP SugarBay GOOD parport_pc probe fail of 00:0b CrownBay-emgd BLOCK Format swap partition failed; X server failed to start up when live image from USB. JasperForest GOOD I/OAT DMA engine init failed; No libXinerama.so for sudoku; login meets some error. Blacksand GOOD Format swap partition failed. eMenlow GOOD Format swap partition failed; S3 does not work. Beagleboard GOOD mmci-omap-hs failed when boot up. Routerstationpro GOOD Everything runs well. Mpc8315e-rdb GOOD Everything runs well. QEMU qemux86 GOOD No enough disk space qemux86-64 GOOD No enough disk space qemuarm GOOD Missing 'perl' command; Not enough disk space. qemuppc Buggy Missing 'perl' command; Not enough disk space; Unfs doesn't work. qemumips GOOD Missing 'perl' command; Not enough disk space. ADT ¡¡ Buggy Unfs does not work with qemuppc; CVS build failed with mips toolchain. ¡¡ Critical bugs, more than 50% test cases are blocked ¡¡ Only Normal, Minor or Enhancement bugs, or less than 10% test cases failed ¡¡ Normal, Major and Critical bugs, and more than 10% test cases failed Detailed Test Result for each component Target Total TCs Not Run Passed Failed Not testable (Blocked) Sugarbay Sato-SDK 55 0 54 1 (bug 1187) 0 Jasperforest LSB-SDK 32 0 30 2 (bug 1188 1189) 0 n450 Sato-SDK 55 0 54 1 (bug 1099) 0 eMenlow Sato-SDK 55 0 52 3 (bug 310 631 1099) 0 Crownbay-Sato-SDK 55 0 36 0 19 Beagleboard 18 0 17 1 (bug 1201) 0 Routerstationpro 30 0 30 0 0 Mpc8315e-rdb 31 0 31 0 0 Qemux86-64 Sato 28 0 27 1 (bug 1172) 0 Qemux86-64 Sato-SDK 31 0 31 0 0 Qemux86 Sato 28 0 27 1 (bug 1172) 0 Qemux86 Sato-SDK 31 0 31 0 0 Qemumips Sato 28 0 26 2 (bug 1171, 1172) 0 Qemumips Sato-SDK 31 0 31 0 0 Qemuppc Sato 21 0 18 3 (bug 414, 1171, 1172) 0 Qemuppc Sato-SDK 27 0 26 1 (bug 414) 0 Qemuarm Sato 28 0 26 2 (bug 1171, 1172) 0 Qemuarm Sato-SDK 31 0 31 0 0 ADT 6 0 5 1 (bug 414) 0 Total 621 0 583 19 19 * You can check the detailed test result in attachment for each target. ** The failed/blocked case number is listed with failed cases¡¯ bug number. Commit Information --------------------------------------- Tree/Branch: Poky/master Poky Commit: a1f79a7896b6411669b3ccada6204d2695e80fc5 Meta Branch: master Meta Commit: 50661bf038a34702f3aa139c3ea0d67fbb0ce5db Issue Summary --------------------------------------- Component Bug Number Target Milestone System & Core OS Installation & Boot New! Bug 1205:[blacksand/emenlow/crownbay] Format swap partition failed when install 1.1 M2 New! Bug 1207:[Crownbay-emgd] X server failed to start up 1.1 M2 System Usage Bug 1171: No enough disk space with qemu sato images 1.1 M2 Bug 1172: Perl not exist in sato image 1.1 M2 Bug 1174: [zypper/rpm] package install/removal costs lots of disk space --- Others New! Bug 1199: qemuppc lsb-sdk rootfs image build failed on autobuilder in nightly build 20110625-1 1.1 New! Bug 1200: qemumips lsb-sdk image build failed on autobuilder with nightly build 20110625-1. --- New! Bug 1201: [beagleboard C4] mmci-omap-hs failed when boot up with 20110625 build 1.1 ADT Bug 414: [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS 1.1 M3 New! Bug 1195: [mips toolchain] cvs configure fail with no cvs_cv_func_printf_ptr set 1.1 M2 Verified Fixed Bug: --------------------------------------- 1. Bug 1183 - sstate_task_postfunc fail for manifest-qemux86-qt4-x11-free.deploy-rpm 2. Bug 1184 - ghostscript checksum fail on autobuilder 3. Bug 1185 - gcc-cross-canadian do_configure fail on autobuilder for qemuarm/mips/ppc