On 2018年05月18日 13:23, Steve Leung wrote:
> Hi list,
> 
> I've got 3-device raid1 btrfs filesystem that's throwing up some
> "corrupt leaf" errors in dmesg.  This is a uniquified list I've
> observed lately:
> 
>   BTRFS critical (device sda1): corrupt leaf: root=1 block=4970196795392
> slot=307 ino=206231 file_offset=0, invalid ram_bytes for uncompressed
> inline extent, have 3468 expect 3469

Would you please use "btrfs-debug-tree -b 4970196795392 /dev/sda1" to
dump the leaf?

It's caught by tree-checker code which is ensuring all tree blocks are
correct before btrfs can take use of them.

That inline extent size check is tested, so I'm wondering if this
indicates any real corruption.
That btrfs-debug-tree output will definitely help.

BTW, if I didn't miss anything, there should not be any inlined extent
in root tree.

>   BTRFS critical (device sda1): corrupt leaf: root=1 block=4970552426496
> slot=91 ino=209736 file_offset=0, invalid ram_bytes for uncompressed
> inline extent, have 3496 expect 3497

Same dump will definitely help.

>   BTRFS critical (device sda1): corrupt leaf: root=1 block=4970712399872
> slot=221 ino=205230 file_offset=0, invalid ram_bytes for uncompressed
> inline extent, have 1790 expect 1791
>   BTRFS critical (device sda1): corrupt leaf: root=1 block=4970803920896
> slot=368 ino=205732 file_offset=0, invalid ram_bytes for uncompressed
> inline extent, have 2475 expect 2476
>   BTRFS critical (device sda1): corrupt leaf: root=1 block=4970987945984
> slot=236 ino=208896 file_offset=0, invalid ram_bytes for uncompressed
> inline extent, have 490 expect 491
> 
> All of them seem to be 1 short of the expected value.
> 
> Some files do seem to be inaccessible on the filesystem, and btrfs
> inspect-internal on any of those inode numbers fails with:
> 
>  ERROR: ino paths ioctl: Input/output error
> 
> and another message for that inode appears.
> 
> 'btrfs check' (output attached) seems to notice these corruptions (among
> a few others, some of which seem to be related to a problematic attempt
> to build Android I posted about some months ago).
> 
> Other information:
> 
> Arch Linux x86-64, kernel 4.16.6, btrfs-progs 4.16.  The filesystem has
> about 25 snapshots at the moment, only a handful of compressed files,
> and nothing fancy like qgroups enabled.
> 
> btrfs fi show:
> 
>  Label: none  uuid: 9d4db9e3-b9c3-4f6d-8cb4-60ff55e96d82
>          Total devices 4 FS bytes used 2.48TiB
>          devid    1 size 1.36TiB used 1.13TiB path /dev/sdd1
>          devid    2 size 464.73GiB used 230.00GiB path /dev/sdc1
>          devid    3 size 1.36TiB used 1.13TiB path /dev/sdb1
>          devid    4 size 3.49TiB used 2.49TiB path /dev/sda1
> 
> btrfs fi df:
> 
>  Data, RAID1: total=2.49TiB, used=2.48TiB
>  System, RAID1: total=32.00MiB, used=416.00KiB
>  Metadata, RAID1: total=7.00GiB, used=5.29GiB
>  GlobalReserve, single: total=512.00MiB, used=0.00B
> 
> dmesg output attached as well.
> 
> Thanks in advance for any assistance!  I have backups of all the
> important stuff here but it would be nice to fix the corruptions in place.

And btrfs check doesn't report the same problem as the default original
mode doesn't have such check.

Please also post the result of "btrfs check --mode=lowmem /dev/sda1"

Thanks,
Qu

> 
> Steve