From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 8 Nov 2018 15:07:58 +0100 Subject: [U-Boot] [PATCH v1 2/2] imx: mkimage: add size check to the u-boot.imx make target In-Reply-To: References: <20181107223947.31783-1-marcel@ziswiler.com> <20181107223947.31783-2-marcel@ziswiler.com> Message-ID: <2db259f4-4e40-cbdc-8b6d-f0f571659eb9@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Marcel, On 08/11/18 02:55, Fabio Estevam wrote: > [Adding Stefano] > > On Wed, Nov 7, 2018 at 8:41 PM Marcel Ziswiler wrote: >> >> From: Marcel Ziswiler >> >> The make macro to check if the binary exceeds the board size limit is >> taken straight from the root Makefile. >> >> Without this and e.g. enabled EFI Vybrid fails booting as the regular >> size limit check does not take the final u-boot.imx binary size into >> account which is bigger due to alignment as well as IMX header stuff. >> >> Signed-off-by: Marcel Ziswiler > > Reviewed-by: Fabio Estevam > > Hi Stefano, maybe this could be material for 2018.11? > Added both patches to u-boot-imx, check is effective, now size is too much and build fails: Building current source for 1 boards (1 thread, 8 jobs per thread) arm: + colibri_vf +u-boot.imx exceeds file size limit: + limit: 520192 bytes + actual: 526104 bytes + excess: 5912 bytes +make[2]: *** [u-boot.imx] Error 1 +make[1]: *** [u-boot.imx] Error 2 +make: *** [sub-make] Error 2 0 0 1 /1 colibri_vf Can you take a look ? Best regards, Stefeano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================