All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform
@ 2021-09-03 18:09 AngeloGioacchino Del Regno
  2021-09-03 18:09 ` [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support AngeloGioacchino Del Regno
                   ` (7 more replies)
  0 siblings, 8 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-03 18:09 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara,
	AngeloGioacchino Del Regno

This commit introduces support for the Sony Yoshino platform, using
the MSM8998 SoC, including:
- Sony Xperia XZ1 (codename Poplar),
- Sony Xperia XZ1 Compact (codename Lilac),
- Sony Xperia XZ Premium (codename Maple).

All of the three aforementioned smartphones are sharing a 99%
equal board configuration, with very small differences between
each other, which is the reason for the introduction of a common
msm8998-sony-xperia-yoshino DT.

This base configuration includes regulators and project-wide pin
configurations and it's made to boot to a serial console.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/Makefile             |   3 +
 .../msm8998-sony-xperia-yoshino-lilac.dts     |  19 +
 .../msm8998-sony-xperia-yoshino-maple.dts     |  43 ++
 .../msm8998-sony-xperia-yoshino-poplar.dts    |  24 +
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 481 ++++++++++++++++++
 5 files changed, 570 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 70516508be56..8a0b558c3065 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -39,6 +39,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-cheeseburger.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-dumpling.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-lilac.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
new file mode 100644
index 000000000000..550de79e0151
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ1 Compact";
+	compatible = "sony,xperia-lilac", "qcom,msm8998";
+};
+
+&vreg_l22a_2p85 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
new file mode 100644
index 000000000000..35a6cdb55aec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ Premium";
+	compatible = "sony,xperia-maple", "qcom,msm8998";
+
+	disp_dvdd_vreg: disp-dvdd-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_dvdd_en";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&disp_dvdd_en>;
+	};
+};
+
+&pmi8998_gpio {
+	disp_dvdd_en: disp-dvdd-en-active {
+		pins = "gpio10";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		output-high;
+		power-source = <0>;
+		qcom,drive-strength = <1>;
+	};
+};
+
+&vreg_l22a_2p85 {
+	regulator-min-microvolt = <2704000>;
+	regulator-max-microvolt = <2704000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
new file mode 100644
index 000000000000..6255004b9a09
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ1";
+	compatible = "sony,xperia-poplar", "qcom,msm8998";
+};
+
+&vreg_l18a_2p85 {
+	regulator-min-microvolt = <2850000>;
+	regulator-max-microvolt = <2850000>;
+};
+
+&vreg_l22a_2p85 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
new file mode 100644
index 000000000000..b07cbc759807
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
+	qcom,board-id = <8 0>;
+
+	board_vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		label = "Side buttons";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
+			    <&cam_snapshot_pin_a>;
+		vol-down {
+			label = "Volume Down";
+			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+		};
+
+		camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+
+	gpio_hall_sensor {
+		compatible = "gpio-keys";
+		input-name = "hall-sensors";
+		label = "Hall sensors";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor0_default>;
+
+		hall_sensor0 {
+			label = "Cover Hall Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			gpio-key,wakeup;
+			debounce-interval = <30>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x3700000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash-region@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		zap_shader_region: gpu@f6400000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6400000 0x0 0x2000>;
+			no-map;
+		};
+
+		adsp_region: memory@fe000000 {
+			reg = <0x0 0xfe000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_region: memory@fe800000 {
+			reg = <0x0 0xfe800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&mmcc {
+	status = "ok";
+};
+
+&mmss_smmu {
+	status = "ok";
+};
+
+&pm8005_lsid1 {
+	pm8005-regulators {
+		compatible = "qcom,pm8005-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+
+		/* VDD_GFX supply */
+		pm8005_s1: s1 {
+			regulator-min-microvolt = <524000>;
+			regulator-max-microvolt = <1088000>;
+			regulator-enable-ramp-delay = <500>;
+
+			regulator-always-on;
+		};
+	};
+};
+
+&pm8998_gpio {
+	vol_down_pin_a: vol-down-active {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	cam_focus_pin_a: cam-focus-btn-active {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	cam_snapshot_pin_a: cam-snapshot-btn-active {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_pon {
+	resin {
+		compatible = "pm8941-resin";
+		interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		bias-pull-up;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+	pm8998-regulators {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <100000>;
+		};
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2032000>;
+		};
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-system-load = <73400>;
+			regulator-allow-set-load;
+		};
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-system-load = <12560>;
+			regulator-allow-set-load;
+		};
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+		vreg_l14a_1p85: l14 {
+			regulator-min-microvolt = <1848000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-system-load = <32000>;
+			regulator-allow-set-load;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+		vreg_l18a_2p85: l18 {};
+		vreg_l19a_2p7: l19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <2704000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			regulator-system-load = <10000>;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+		vreg_l22a_2p85: l22 { };
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_lvs1a_1p8: lvs1 { };
+		vreg_lvs2a_1p8: lvs2 { };
+
+	};
+
+	pmi8998-regulators {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on  &sdc2_data_on  &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	mdp_vsync_n: mdp-vsync-n {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_ven: nfc-ven {
+		pins = "gpio12";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	msm_mclk0_default: msm-mclk0-active {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk1_default: msm-mclk1-active {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cci0_default: cci0-default {
+		pins = "gpio18", "gpio19";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cci1_default: cci1-default {
+		pins = "gpio19", "gpio20";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	hall_sensor0_default: acc-cover-open {
+		pins = "gpio124";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		input-enable;
+	};
+};
+
+/*
+ * WARNING:
+ * Disable UFS until card quirks are in to avoid unrecoverable hard-brick
+ * that would happen as soon as the UFS card gets probed as, without the
+ * required quirks, the bootloader will be erased right after card probe.
+ */
+&ufshc {
+	status = "disabled";
+};
+
+&ufsphy {
+	status = "disabled";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	/* Force to peripheral until we have Type-C hooked up */
+	dr_mode = "peripheral";
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
@ 2021-09-03 18:09 ` AngeloGioacchino Del Regno
  2021-09-07 13:41   ` Bjorn Andersson
  2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
                   ` (6 subsequent siblings)
  7 siblings, 1 reply; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-03 18:09 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara,
	AngeloGioacchino Del Regno

All of the devices in the Sony Yoshino platform are using a Synaptics
RMI4-compatible touch IC with identical pins and supplies: enable the
I2C-5 bus and add the rmi4-i2c node along with the required pin
configurations.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index b07cbc759807..2fe53e4675d5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -30,6 +30,15 @@ board_vbat: vbat-regulator {
 		regulator-boot-on;
 	};
 
+	touch_vddio_vreg: touch-vddio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_vddio_vreg";
+		startup-delay-us = <10000>;
+		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_vddio_en>;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -134,6 +143,42 @@ ramoops@ffc00000 {
 	};
 };
 
+&blsp1_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	touchscreen: synaptics-rmi4-i2c@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_n>;
+
+		vdd-supply = <&vreg_l28_3p0>;
+		vio-supply = <&touch_vddio_vreg>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <1000>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5_sleep {
+	bias-disable;
+};
+
 &blsp2_uart1 {
 	status = "okay";
 };
@@ -448,6 +493,21 @@ hall_sensor0_default: acc-cover-open {
 		drive-strength = <2>;
 		input-enable;
 	};
+
+	ts_int_n: ts-int-n {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_vddio_en: ts-vddio-en-default {
+		pins = "gpio133";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
 };
 
 /*
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
  2021-09-03 18:09 ` [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support AngeloGioacchino Del Regno
@ 2021-09-03 18:09 ` AngeloGioacchino Del Regno
  2021-09-07 13:42   ` Bjorn Andersson
  2021-09-09 13:19   ` Dmitry Baryshkov
  2021-09-03 18:09 ` [PATCH 4/7] arm64: dts: qcom: msm8998-xperia: Add support for gpio vibrator AngeloGioacchino Del Regno
                   ` (5 subsequent siblings)
  7 siblings, 2 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-03 18:09 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara,
	AngeloGioacchino Del Regno

This platform uses the WCN3990 Bluetooth chip, reachable on UART-3.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 2fe53e4675d5..66b009ba72fe 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -179,6 +179,23 @@ &blsp1_i2c5_sleep {
 	bias-disable;
 };
 
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+
+		clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+	};
+};
+
+
 &blsp2_uart1 {
 	status = "okay";
 };
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCH 4/7] arm64: dts: qcom: msm8998-xperia: Add support for gpio vibrator
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
  2021-09-03 18:09 ` [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support AngeloGioacchino Del Regno
  2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
@ 2021-09-03 18:09 ` AngeloGioacchino Del Regno
  2021-09-03 18:09 ` [PATCH 5/7] arm64: dts: qcom: msm8998-xperia: Configure display boost regulators AngeloGioacchino Del Regno
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-03 18:09 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara,
	AngeloGioacchino Del Regno

All smartphones in the Sony Yoshino platforms have got a simple
vibrator hooked to a GPIO: add support for that and add its own
pin configuration.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 66b009ba72fe..8c7aba8eadee 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -141,6 +141,13 @@ ramoops@ffc00000 {
 			ecc-size = <16>;
 		};
 	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vib_default>;
+	};
 };
 
 &blsp1_i2c5 {
@@ -251,6 +258,18 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
 	};
 };
 
+&pmi8998_gpio {
+	vib_default: vib-en {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-disable;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		power-source = <0>;
+	};
+};
+
 &pm8998_pon {
 	resin {
 		compatible = "pm8941-resin";
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCH 5/7] arm64: dts: qcom: msm8998-xperia: Configure display boost regulators
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
                   ` (2 preceding siblings ...)
  2021-09-03 18:09 ` [PATCH 4/7] arm64: dts: qcom: msm8998-xperia: Add support for gpio vibrator AngeloGioacchino Del Regno
@ 2021-09-03 18:09 ` AngeloGioacchino Del Regno
  2021-09-03 18:09 ` [PATCH 6/7] arm64: dts: qcom: msm8998-xperia: Add camera regulators AngeloGioacchino Del Regno
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-03 18:09 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara,
	AngeloGioacchino Del Regno

Add configuration for the LAB and IBB regulators (in boost mode):
this platform has smartphones with three different display sizes,
hence different displays requiring different voltage.

The common configuration parameters have been put in the common
device-tree, while specific voltage specs and soft-start-us are
variant specific, so they have been put into the machine specific
dts file.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../msm8998-sony-xperia-yoshino-lilac.dts     | 11 ++++++++
 .../msm8998-sony-xperia-yoshino-maple.dts     | 11 ++++++++
 .../msm8998-sony-xperia-yoshino-poplar.dts    | 11 ++++++++
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 25 +++++++++++++++++++
 4 files changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
index 550de79e0151..0de919357de4 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
@@ -13,6 +13,17 @@ / {
 	compatible = "sony,xperia-lilac", "qcom,msm8998";
 };
 
+&ibb {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+	qcom,soft-start-us = <800>;
+};
+
 &vreg_l22a_2p85 {
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 35a6cdb55aec..87115d648cef 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -25,6 +25,17 @@ disp_dvdd_vreg: disp-dvdd-vreg {
 	};
 };
 
+&ibb {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5800000>;
+	regulator-max-microvolt = <5800000>;
+	qcom,soft-start-us = <200>;
+};
+
 &pmi8998_gpio {
 	disp_dvdd_en: disp-dvdd-en-active {
 		pins = "gpio10";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
index 6255004b9a09..9fa3583c951b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
@@ -13,6 +13,17 @@ / {
 	compatible = "sony,xperia-poplar", "qcom,msm8998";
 };
 
+&ibb {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+	qcom,soft-start-us = <800>;
+};
+
 &vreg_l18a_2p85 {
 	regulator-min-microvolt = <2850000>;
 	regulator-max-microvolt = <2850000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 8c7aba8eadee..80c2cd7ae0eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -207,6 +207,31 @@ &blsp2_uart1 {
 	status = "okay";
 };
 
+&ibb {
+	regulator-min-microamp = <800000>;
+	regulator-max-microamp = <800000>;
+	regulator-enable-ramp-delay = <200>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-ramp-delay = <1>;
+	regulator-settling-time-up-us = <600>;
+	regulator-settling-time-down-us = <1000>;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+	regulator-min-microamp = <200000>;
+	regulator-max-microamp = <200000>;
+	regulator-enable-ramp-delay = <500>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-ramp-delay = <1>;
+	regulator-settling-time-up-us = <50000>;
+	regulator-settling-time-down-us = <3000>;
+	regulator-soft-start;
+};
+
 &mmcc {
 	status = "ok";
 };
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCH 6/7] arm64: dts: qcom: msm8998-xperia: Add camera regulators
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
                   ` (3 preceding siblings ...)
  2021-09-03 18:09 ` [PATCH 5/7] arm64: dts: qcom: msm8998-xperia: Configure display boost regulators AngeloGioacchino Del Regno
@ 2021-09-03 18:09 ` AngeloGioacchino Del Regno
  2021-09-03 18:09 ` [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin AngeloGioacchino Del Regno
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-03 18:09 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara,
	AngeloGioacchino Del Regno

All of the machines of the Sony Yoshino platform are equipped with
two cameras, sharing the same regulators configuration.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 80c2cd7ae0eb..5fbe5abf4133 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -30,6 +30,38 @@ board_vbat: vbat-regulator {
 		regulator-boot-on;
 	};
 
+	cam0_vdig_vreg: cam0-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "cam0_vdig";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_vdig_default>;
+	};
+
+	cam1_vdig_vreg: cam1-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1_vdig";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam1_vdig_default>;
+		vin-supply = <&vreg_s3a_1p35>;
+	};
+
+	cam_vio_vreg: cam-vio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vio_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_vio_default>;
+		vin-supply = <&vreg_lvs1a_1p8>;
+	};
+
 	touch_vddio_vreg: touch-vddio-vreg {
 		compatible = "regulator-fixed";
 		regulator-name = "touch_vddio_vreg";
@@ -284,6 +316,16 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
 };
 
 &pmi8998_gpio {
+	cam_vio_default: cam-vio-active {
+		pins = "gpio1";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-disable;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		power-source = <1>;
+	};
+
 	vib_default: vib-en {
 		pins = "gpio5";
 		function = PMIC_GPIO_FUNC_NORMAL;
@@ -547,6 +589,20 @@ cci1_default: cci1-default {
 		drive-strength = <2>;
 	};
 
+	cam0_vdig_default: cam0-vdig-default {
+		pins = "gpio21";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cam1_vdig_default: cam1-vdig-default {
+		pins = "gpio25";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
 	hall_sensor0_default: acc-cover-open {
 		pins = "gpio124";
 		function = "gpio";
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
                   ` (4 preceding siblings ...)
  2021-09-03 18:09 ` [PATCH 6/7] arm64: dts: qcom: msm8998-xperia: Add camera regulators AngeloGioacchino Del Regno
@ 2021-09-03 18:09 ` AngeloGioacchino Del Regno
  2021-09-07 13:47   ` Bjorn Andersson
  2021-09-07 11:40   ` kernel test robot
  2021-09-07 13:04 ` Bjorn Andersson
  7 siblings, 1 reply; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-03 18:09 UTC (permalink / raw)
  To: bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara,
	AngeloGioacchino Del Regno

All smartphones of this platform are equipped with a WCD9335 audio
codec, getting its MCLK from PM8998 gpio13: add this clock to DT.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 5fbe5abf4133..7aeebd3b2e9e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -20,6 +20,19 @@ / {
 	qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
 	qcom,board-id = <8 0>;
 
+	clocks {
+		compatible = "simple-bus";
+
+		div1_mclk: divclk1 {
+			compatible = "gpio-gate-clock";
+			pinctrl-0 = <&audio_mclk_pin>;
+			pinctrl-names = "default";
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			#clock-cells = <0>;
+			enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	board_vbat: vbat-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VBAT";
@@ -313,6 +326,12 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
 		input-enable;
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
+
+	audio_mclk_pin: audio-mclk-pin-active {
+		pins = "gpio13";
+		function = "func2";
+		power-source = <0>;
+	};
 };
 
 &pmi8998_gpio {
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread

* Re: [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
@ 2021-09-07 11:40   ` kernel test robot
  2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
                     ` (6 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: kernel test robot @ 2021-09-07 11:40 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno, bjorn.andersson
  Cc: kbuild-all, agross, robh+dt, linux-arm-msm, devicetree,
	linux-kernel, konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming

[-- Attachment #1: Type: text/plain, Size: 1904 bytes --]

Hi AngeloGioacchino,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.14 next-20210907]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/AngeloGioacchino-Del-Regno/arm64-dts-qcom-Introduce-support-for-MSM8998-Sony-Yoshino-platform/20210904-021033
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-randconfig-r002-20210906 (attached as .config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/3f74465c0aa58eda122ee20c2962a7b8f4fe861b
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review AngeloGioacchino-Del-Regno/arm64-dts-qcom-Introduce-support-for-MSM8998-Sony-Yoshino-platform/20210904-021033
        git checkout 3f74465c0aa58eda122ee20c2962a7b8f4fe861b
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi:141.1-6 Label or path mmcc not found
>> Error: arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi:145.1-11 Label or path mmss_smmu not found
>> FATAL ERROR: Syntax error parsing input tree

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 44450 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform
@ 2021-09-07 11:40   ` kernel test robot
  0 siblings, 0 replies; 18+ messages in thread
From: kernel test robot @ 2021-09-07 11:40 UTC (permalink / raw)
  To: kbuild-all

[-- Attachment #1: Type: text/plain, Size: 1942 bytes --]

Hi AngeloGioacchino,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.14 next-20210907]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/AngeloGioacchino-Del-Regno/arm64-dts-qcom-Introduce-support-for-MSM8998-Sony-Yoshino-platform/20210904-021033
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-randconfig-r002-20210906 (attached as .config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/3f74465c0aa58eda122ee20c2962a7b8f4fe861b
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review AngeloGioacchino-Del-Regno/arm64-dts-qcom-Introduce-support-for-MSM8998-Sony-Yoshino-platform/20210904-021033
        git checkout 3f74465c0aa58eda122ee20c2962a7b8f4fe861b
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi:141.1-6 Label or path mmcc not found
>> Error: arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi:145.1-11 Label or path mmss_smmu not found
>> FATAL ERROR: Syntax error parsing input tree

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 44450 bytes --]

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform
  2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
                   ` (6 preceding siblings ...)
  2021-09-07 11:40   ` kernel test robot
@ 2021-09-07 13:04 ` Bjorn Andersson
  2021-09-09 10:40   ` AngeloGioacchino Del Regno
  7 siblings, 1 reply; 18+ messages in thread
From: Bjorn Andersson @ 2021-09-07 13:04 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:

> This commit introduces support for the Sony Yoshino platform, using
> the MSM8998 SoC, including:
> - Sony Xperia XZ1 (codename Poplar),
> - Sony Xperia XZ1 Compact (codename Lilac),
> - Sony Xperia XZ Premium (codename Maple).
> 

Nice!

> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
[..]
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	gpio_keys {

Please don't use '_' in node names.

> +		compatible = "gpio-keys";
> +		input-name = "gpio-keys";
> +		label = "Side buttons";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
> +			    <&cam_snapshot_pin_a>;
> +		vol-down {
> +			label = "Volume Down";
> +			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <1>;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			gpio-key,wakeup;
> +			debounce-interval = <15>;
> +		};
> +
> +		camera-snapshot {
> +			label = "Camera Snapshot";
> +			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <1>;
> +			linux,code = <KEY_CAMERA>;
> +			debounce-interval = <15>;
> +		};
> +
> +		camera-focus {
> +			label = "Camera Focus";
> +			gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <1>;
> +			linux,code = <KEY_CAMERA_FOCUS>;
> +			debounce-interval = <15>;
> +		};
> +	};
> +
> +	gpio_hall_sensor {

Ditto.

> +		compatible = "gpio-keys";
> +		input-name = "hall-sensors";
> +		label = "Hall sensors";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hall_sensor0_default>;
> +
> +		hall_sensor0 {

And here...

> +			label = "Cover Hall Sensor";
> +			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <EV_SW>;
> +			linux,code = <SW_LID>;
> +			gpio-key,wakeup;
> +			debounce-interval = <30>;
> +		};
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@85800000 {
> +			reg = <0x0 0x85800000 0x0 0x3700000>;
> +			no-map;
> +		};
> +
> +		cont_splash_mem: cont-splash-region@9d400000 {

Is there any reason for not just naming this "memory"?

> +			reg = <0x0 0x9d400000 0x0 0x2400000>;
> +			no-map;
> +		};
> +
> +		zap_shader_region: gpu@f6400000 {

This is also just "memory" here.

> +			compatible = "shared-dma-pool";
> +			reg = <0x0 0xf6400000 0x0 0x2000>;
> +			no-map;
> +		};
> +
[..]
> +&rpm_requests {
> +	pm8998-regulators {
> +		compatible = "qcom,rpm-pm8998-regulators";
> +
[..]
> +		vreg_lvs1a_1p8: lvs1 { };
> +		vreg_lvs2a_1p8: lvs2 { };
> +

Blank line.

> +	};
> +
> +	pmi8998-regulators {
> +		compatible = "qcom,rpm-pmi8998-regulators";
> +
> +		vdd_bob-supply = <&vph_pwr>;
> +
> +		vreg_bob: bob {
> +			regulator-min-microvolt = <3312000>;
> +			regulator-max-microvolt = <3600000>;
> +		};
> +	};
> +};
> +
> +&sdhc2 {
> +	status = "okay";
> +	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
> +
> +	vmmc-supply = <&vreg_l21a_2p95>;
> +	vqmmc-supply = <&vreg_l13a_2p95>;
> +
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on  &sdc2_data_on  &sdc2_cd_on>;
> +	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

How about grouping these various pins as "sdc2_default_state" and
"sdc2_sleep_state"?

> +};
> +
Regards,
Bjorn

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support
  2021-09-03 18:09 ` [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support AngeloGioacchino Del Regno
@ 2021-09-07 13:41   ` Bjorn Andersson
  2021-09-09 11:25     ` AngeloGioacchino Del Regno
  0 siblings, 1 reply; 18+ messages in thread
From: Bjorn Andersson @ 2021-09-07 13:41 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:

> All of the devices in the Sony Yoshino platform are using a Synaptics
> RMI4-compatible touch IC with identical pins and supplies: enable the
> I2C-5 bus and add the rmi4-i2c node along with the required pin
> configurations.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> index b07cbc759807..2fe53e4675d5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> @@ -30,6 +30,15 @@ board_vbat: vbat-regulator {
>  		regulator-boot-on;
>  	};
>  
> +	touch_vddio_vreg: touch-vddio-vreg {
> +		compatible = "regulator-fixed";
> +		regulator-name = "touch_vddio_vreg";
> +		startup-delay-us = <10000>;
> +		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts_vddio_en>;
> +	};
> +
>  	vph_pwr: vph-pwr-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vph_pwr";
> @@ -134,6 +143,42 @@ ramoops@ffc00000 {
>  	};
>  };
>  
> +&blsp1_i2c5 {
> +	status = "okay";
> +	clock-frequency = <355000>;
> +
> +	touchscreen: synaptics-rmi4-i2c@2c {

"touchscreen" sounds like a better "generic name" for the node.

Haven't checked the following patches yet, do you need the label?

Regards,
Bjorn

> +		compatible = "syna,rmi4-i2c";
> +		reg = <0x2c>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts_int_n>;
> +
> +		vdd-supply = <&vreg_l28_3p0>;
> +		vio-supply = <&touch_vddio_vreg>;
> +
> +		syna,reset-delay-ms = <220>;
> +		syna,startup-delay-ms = <1000>;
> +
> +		rmi4-f01@1 {
> +			reg = <0x01>;
> +			syna,nosleep-mode = <1>;
> +		};
> +
> +		rmi4-f11@11 {
> +			reg = <0x11>;
> +			syna,sensor-type = <1>;
> +		};
> +	};
> +};
> +
> +&blsp1_i2c5_sleep {
> +	bias-disable;
> +};
> +
>  &blsp2_uart1 {
>  	status = "okay";
>  };
> @@ -448,6 +493,21 @@ hall_sensor0_default: acc-cover-open {
>  		drive-strength = <2>;
>  		input-enable;
>  	};
> +
> +	ts_int_n: ts-int-n {
> +		pins = "gpio125";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-pull-up;
> +	};
> +
> +	ts_vddio_en: ts-vddio-en-default {
> +		pins = "gpio133";
> +		function = "gpio";
> +		bias-disable;
> +		drive-strength = <2>;
> +		output-low;
> +	};
>  };
>  
>  /*
> -- 
> 2.32.0
> 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth
  2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
@ 2021-09-07 13:42   ` Bjorn Andersson
  2021-09-09 13:19   ` Dmitry Baryshkov
  1 sibling, 0 replies; 18+ messages in thread
From: Bjorn Andersson @ 2021-09-07 13:42 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:

> This platform uses the WCN3990 Bluetooth chip, reachable on UART-3.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi   | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> index 2fe53e4675d5..66b009ba72fe 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> @@ -179,6 +179,23 @@ &blsp1_i2c5_sleep {
>  	bias-disable;
>  };
>  
> +&blsp1_uart3 {
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "qcom,wcn3990-bt";
> +
> +		vddio-supply = <&vreg_s4a_1p8>;
> +		vddxo-supply = <&vreg_l7a_1p8>;
> +		vddrf-supply = <&vreg_l17a_1p3>;
> +		vddch0-supply = <&vreg_l25a_3p3>;
> +		max-speed = <3200000>;
> +
> +		clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
> +	};
> +};
> +
> +

Please drop the extra newline when you respin the series.

Regards,
Bjorn

>  &blsp2_uart1 {
>  	status = "okay";
>  };
> -- 
> 2.32.0
> 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin
  2021-09-03 18:09 ` [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin AngeloGioacchino Del Regno
@ 2021-09-07 13:47   ` Bjorn Andersson
  2021-09-09 10:57     ` AngeloGioacchino Del Regno
  0 siblings, 1 reply; 18+ messages in thread
From: Bjorn Andersson @ 2021-09-07 13:47 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:

> All smartphones of this platform are equipped with a WCD9335 audio
> codec, getting its MCLK from PM8998 gpio13: add this clock to DT.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>  .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> index 5fbe5abf4133..7aeebd3b2e9e 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> @@ -20,6 +20,19 @@ / {
>  	qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
>  	qcom,board-id = <8 0>;
>  
> +	clocks {
> +		compatible = "simple-bus";
> +
> +		div1_mclk: divclk1 {
> +			compatible = "gpio-gate-clock";
> +			pinctrl-0 = <&audio_mclk_pin>;
> +			pinctrl-names = "default";
> +			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;

What controls the clock rate of divclk1?

Regards,
Bjorn

> +			#clock-cells = <0>;
> +			enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
>  	board_vbat: vbat-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "VBAT";
> @@ -313,6 +326,12 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
>  		input-enable;
>  		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
>  	};
> +
> +	audio_mclk_pin: audio-mclk-pin-active {
> +		pins = "gpio13";
> +		function = "func2";
> +		power-source = <0>;
> +	};
>  };
>  
>  &pmi8998_gpio {
> -- 
> 2.32.0
> 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform
  2021-09-07 13:04 ` Bjorn Andersson
@ 2021-09-09 10:40   ` AngeloGioacchino Del Regno
  0 siblings, 0 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-09 10:40 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

Il 07/09/21 15:04, Bjorn Andersson ha scritto:
> On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:
> 
>> This commit introduces support for the Sony Yoshino platform, using
>> the MSM8998 SoC, including:
>> - Sony Xperia XZ1 (codename Poplar),
>> - Sony Xperia XZ1 Compact (codename Lilac),
>> - Sony Xperia XZ Premium (codename Maple).
>>
> 
> Nice!
> 
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> [..]
>> +	vph_pwr: vph-pwr-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vph_pwr";
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	gpio_keys {
> 
> Please don't use '_' in node names.
> 

Sorry, all of that is fixed.

>> +	reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		hyp_mem: memory@85800000 {
>> +			reg = <0x0 0x85800000 0x0 0x3700000>;
>> +			no-map;
>> +		};
>> +
>> +		cont_splash_mem: cont-splash-region@9d400000 {
> 
> Is there any reason for not just naming this "memory"?
> 

No, there's no reason. Changed to 'memory'.

>> +			compatible = "shared-dma-pool";
>> +			reg = <0x0 0xf6400000 0x0 0x2000>;
>> +			no-map;
>> +		};
>> +
> [..]
>> +&rpm_requests {
>> +	pm8998-regulators {
>> +		compatible = "qcom,rpm-pm8998-regulators";
>> +
> [..]
>> +		vreg_lvs1a_1p8: lvs1 { };
>> +		vreg_lvs2a_1p8: lvs2 { };
>> +
> 
> Blank line.
> 

Done.

Also, we had a better internal review of the 8998 dt patches, so in the
next version there will be even more cleanups.

>> +	};
>> +
>> +	pmi8998-regulators {
>> +		compatible = "qcom,rpm-pmi8998-regulators";
>> +
>> +		vdd_bob-supply = <&vph_pwr>;
>> +
>> +		vreg_bob: bob {
>> +			regulator-min-microvolt = <3312000>;
>> +			regulator-max-microvolt = <3600000>;
>> +		};
>> +	};
>> +};
>> +
>> +&sdhc2 {
>> +	status = "okay";
>> +	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
>> +
>> +	vmmc-supply = <&vreg_l21a_2p95>;
>> +	vqmmc-supply = <&vreg_l13a_2p95>;
>> +
>> +	pinctrl-names = "default", "sleep";
>> +	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on  &sdc2_data_on  &sdc2_cd_on>;
>> +	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> 
> How about grouping these various pins as "sdc2_default_state" and
> "sdc2_sleep_state"?
> 

I agree with you on the fact that groping these pins would look way better,
but I'm inheriting the sdc2 pinctrl from msm8998.dtsi and... all of the msm8998
boards, including msm8998-mtp and msm8998-clamshell (and whatever else inherits
these) are doing the same as what I am doing here.

That said, are you proposing to change 'em all?

Cheers,
- Angelo

>> +};
>> +
> Regards,
> Bjorn
> 


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin
  2021-09-07 13:47   ` Bjorn Andersson
@ 2021-09-09 10:57     ` AngeloGioacchino Del Regno
  0 siblings, 0 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-09 10:57 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

Il 07/09/21 15:47, Bjorn Andersson ha scritto:
> On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:
> 
>> All smartphones of this platform are equipped with a WCD9335 audio
>> codec, getting its MCLK from PM8998 gpio13: add this clock to DT.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
>> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
>> ---
>>   .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 19 +++++++++++++++++++
>>   1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> index 5fbe5abf4133..7aeebd3b2e9e 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> @@ -20,6 +20,19 @@ / {
>>   	qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
>>   	qcom,board-id = <8 0>;
>>   
>> +	clocks {
>> +		compatible = "simple-bus";
>> +
>> +		div1_mclk: divclk1 {
>> +			compatible = "gpio-gate-clock";
>> +			pinctrl-0 = <&audio_mclk_pin>;
>> +			pinctrl-names = "default";
>> +			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
> 
> What controls the clock rate of divclk1?
> 

That's going to be assigned to WCD9335 (oh btw, I have working audio locally!
it's not great, but I can hear sounds from the internal speakers), but I
haven't added the entire audio configuration in these submitted commits because:
1. It needs two GDSCs in GCC: adding them without enabling the lpass iommu will
    produce a crash, as the iommu would go off when the kernel starts turning off
    unused stuff... and we have secure contexts there, which means that the
    hypervisor will say hello;
2. The lpass iommu needs a commit in the qcom smmu implementation detail driver,
    as we need to select a different context (not the last ctx, but the one before)
    for bypass streams emulation, as the last one seems to be untouchable... small
    preview of the required commit:
    qsmmu->bypass_cbndx = [value from dt], or [default == smmu->num_context_banks-1]
3. We need the lpass iommu to get "the audio stuff" (surely, no need to list it).

So that's the entire picture... I am planning to get this base merged in before
going for a cleanup and submission of the rest of what I have here.


Long story short: WCD9335 will be responsible for controlling this clock.

Cheers,
- Angelo

> Regards,
> Bjorn
> 
>> +			#clock-cells = <0>;
>> +			enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
>> +		};
>> +	};
>> +
>>   	board_vbat: vbat-regulator {
>>   		compatible = "regulator-fixed";
>>   		regulator-name = "VBAT";
>> @@ -313,6 +326,12 @@ cam_snapshot_pin_a: cam-snapshot-btn-active {
>>   		input-enable;
>>   		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
>>   	};
>> +
>> +	audio_mclk_pin: audio-mclk-pin-active {
>> +		pins = "gpio13";
>> +		function = "func2";
>> +		power-source = <0>;
>> +	};
>>   };
>>   
>>   &pmi8998_gpio {
>> -- 
>> 2.32.0
>>


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support
  2021-09-07 13:41   ` Bjorn Andersson
@ 2021-09-09 11:25     ` AngeloGioacchino Del Regno
  0 siblings, 0 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-09 11:25 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

Il 07/09/21 15:41, Bjorn Andersson ha scritto:
> On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:
> 
>> All of the devices in the Sony Yoshino platform are using a Synaptics
>> RMI4-compatible touch IC with identical pins and supplies: enable the
>> I2C-5 bus and add the rmi4-i2c node along with the required pin
>> configurations.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
>> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
>> ---
>>   .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 60 +++++++++++++++++++
>>   1 file changed, 60 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> index b07cbc759807..2fe53e4675d5 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> @@ -30,6 +30,15 @@ board_vbat: vbat-regulator {
>>   		regulator-boot-on;
>>   	};
>>   
>> +	touch_vddio_vreg: touch-vddio-vreg {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "touch_vddio_vreg";
>> +		startup-delay-us = <10000>;
>> +		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&ts_vddio_en>;
>> +	};
>> +
>>   	vph_pwr: vph-pwr-regulator {
>>   		compatible = "regulator-fixed";
>>   		regulator-name = "vph_pwr";
>> @@ -134,6 +143,42 @@ ramoops@ffc00000 {
>>   	};
>>   };
>>   
>> +&blsp1_i2c5 {
>> +	status = "okay";
>> +	clock-frequency = <355000>;
>> +
>> +	touchscreen: synaptics-rmi4-i2c@2c {
> 
> "touchscreen" sounds like a better "generic name" for the node.
> 
> Haven't checked the following patches yet, do you need the label?
> 

Thank you, I forgot to remove the label after a cleanup.
Also, node name changed.

Cheers,
- Angelo

> Regards,
> Bjorn
> 
>> +		compatible = "syna,rmi4-i2c";
>> +		reg = <0x2c>;
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
>> +
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&ts_int_n>;
>> +
>> +		vdd-supply = <&vreg_l28_3p0>;
>> +		vio-supply = <&touch_vddio_vreg>;
>> +
>> +		syna,reset-delay-ms = <220>;
>> +		syna,startup-delay-ms = <1000>;
>> +
>> +		rmi4-f01@1 {
>> +			reg = <0x01>;
>> +			syna,nosleep-mode = <1>;
>> +		};
>> +
>> +		rmi4-f11@11 {
>> +			reg = <0x11>;
>> +			syna,sensor-type = <1>;
>> +		};
>> +	};
>> +};
>> +
>> +&blsp1_i2c5_sleep {
>> +	bias-disable;
>> +};
>> +
>>   &blsp2_uart1 {
>>   	status = "okay";
>>   };
>> @@ -448,6 +493,21 @@ hall_sensor0_default: acc-cover-open {
>>   		drive-strength = <2>;
>>   		input-enable;
>>   	};
>> +
>> +	ts_int_n: ts-int-n {
>> +		pins = "gpio125";
>> +		function = "gpio";
>> +		drive-strength = <8>;
>> +		bias-pull-up;
>> +	};
>> +
>> +	ts_vddio_en: ts-vddio-en-default {
>> +		pins = "gpio133";
>> +		function = "gpio";
>> +		bias-disable;
>> +		drive-strength = <2>;
>> +		output-low;
>> +	};
>>   };
>>   
>>   /*
>> -- 
>> 2.32.0
>>


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth
  2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
  2021-09-07 13:42   ` Bjorn Andersson
@ 2021-09-09 13:19   ` Dmitry Baryshkov
  2021-09-09 18:03     ` AngeloGioacchino Del Regno
  1 sibling, 1 reply; 18+ messages in thread
From: Dmitry Baryshkov @ 2021-09-09 13:19 UTC (permalink / raw)
  To: AngeloGioacchino Del Regno, bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

On 03/09/2021 21:09, AngeloGioacchino Del Regno wrote:
> This platform uses the WCN3990 Bluetooth chip, reachable on UART-3.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>   .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi   | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> index 2fe53e4675d5..66b009ba72fe 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> @@ -179,6 +179,23 @@ &blsp1_i2c5_sleep {
>   	bias-disable;
>   };
>   
> +&blsp1_uart3 {
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "qcom,wcn3990-bt";
> +
> +		vddio-supply = <&vreg_s4a_1p8>;
> +		vddxo-supply = <&vreg_l7a_1p8>;
> +		vddrf-supply = <&vreg_l17a_1p3>;
> +		vddch0-supply = <&vreg_l25a_3p3>;
> +		max-speed = <3200000>;
> +
> +		clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
> +	};
> +};

There is an ongoing proposal to rework wcn3990 (bt and wifi) bindings, 
so we might want to delay this a bit. Not a strict requirement, since 
the changes would be backwards-compatible.


-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth
  2021-09-09 13:19   ` Dmitry Baryshkov
@ 2021-09-09 18:03     ` AngeloGioacchino Del Regno
  0 siblings, 0 replies; 18+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-09-09 18:03 UTC (permalink / raw)
  To: Dmitry Baryshkov, bjorn.andersson
  Cc: agross, robh+dt, linux-arm-msm, devicetree, linux-kernel,
	konrad.dybcio, marijn.suijten, martin.botka,
	~postmarketos/upstreaming, phone-devel, paul.bouchara

Il 09/09/21 15:19, Dmitry Baryshkov ha scritto:
> On 03/09/2021 21:09, AngeloGioacchino Del Regno wrote:
>> This platform uses the WCN3990 Bluetooth chip, reachable on UART-3.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
>> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
>> ---
>>   .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi   | 17 +++++++++++++++++
>>   1 file changed, 17 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi 
>> b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> index 2fe53e4675d5..66b009ba72fe 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
>> @@ -179,6 +179,23 @@ &blsp1_i2c5_sleep {
>>       bias-disable;
>>   };
>> +&blsp1_uart3 {
>> +    status = "okay";
>> +
>> +    bluetooth {
>> +        compatible = "qcom,wcn3990-bt";
>> +
>> +        vddio-supply = <&vreg_s4a_1p8>;
>> +        vddxo-supply = <&vreg_l7a_1p8>;
>> +        vddrf-supply = <&vreg_l17a_1p3>;
>> +        vddch0-supply = <&vreg_l25a_3p3>;
>> +        max-speed = <3200000>;
>> +
>> +        clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
>> +    };
>> +};
> 
> There is an ongoing proposal to rework wcn3990 (bt and wifi) bindings, so we might 
> want to delay this a bit. Not a strict requirement, since the changes would be 
> backwards-compatible.
> 
> 

Delaying this patch is not a problem on my side - but if the changes are backwards
compatible, do we really have reasons to delay it?

In any case, I trust your judgement on this: if you want to delay it, I will send
the wcn3990 support after the rework.

Cheers,
- Angelo

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2021-09-09 18:03 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support AngeloGioacchino Del Regno
2021-09-07 13:41   ` Bjorn Andersson
2021-09-09 11:25     ` AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
2021-09-07 13:42   ` Bjorn Andersson
2021-09-09 13:19   ` Dmitry Baryshkov
2021-09-09 18:03     ` AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 4/7] arm64: dts: qcom: msm8998-xperia: Add support for gpio vibrator AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 5/7] arm64: dts: qcom: msm8998-xperia: Configure display boost regulators AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 6/7] arm64: dts: qcom: msm8998-xperia: Add camera regulators AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin AngeloGioacchino Del Regno
2021-09-07 13:47   ` Bjorn Andersson
2021-09-09 10:57     ` AngeloGioacchino Del Regno
2021-09-07 11:40 ` [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform kernel test robot
2021-09-07 11:40   ` kernel test robot
2021-09-07 13:04 ` Bjorn Andersson
2021-09-09 10:40   ` AngeloGioacchino Del Regno

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.