All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
@ 2022-05-26 20:36 ` Krzysztof Kozlowski
  0 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-26 20:36 UTC (permalink / raw)
  To: Patrice Chotard, Rob Herring, Krzysztof Kozlowski,
	linux-arm-kernel, devicetree, linux-kernel
  Cc: Krzysztof Kozlowski

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Output compared with dtx_diff and fdtdump.
---
 arch/arm/boot/dts/stih407-family.dtsi | 174 +++++++++++++-------------
 arch/arm/boot/dts/stih407.dtsi        |   4 +-
 arch/arm/boot/dts/stih410.dtsi        |   4 +-
 arch/arm/boot/dts/stihxxx-b2120.dtsi  |   8 +-
 4 files changed, 95 insertions(+), 95 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 1713f7878117..33cf54cb46cc 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -137,8 +137,8 @@ picophyreset: picophyreset-controller {
 	};
 
 	irq-syscfg {
-		compatible    = "st,stih407-irq-syscfg";
-		st,syscfg     = <&syscfg_core>;
+		compatible = "st,stih407-irq-syscfg";
+		st,syscfg = <&syscfg_core>;
 		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
 				<ST_IRQ_SYSCFG_PMU_1>;
 		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
@@ -157,8 +157,8 @@ usb2_picophy0: phy1 {
 	miphy28lp_phy: miphy28lp {
 		compatible = "st,miphy28lp-phy";
 		st,syscfg = <&syscfg_core>;
-		#address-cells	= <1>;
-		#size-cells	= <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 		ranges;
 
 		phy_port0: port@9b22000 {
@@ -208,26 +208,26 @@ phy_port2: port@8f95000 {
 	};
 
 	st231_gp0: st231-gp0 {
-		compatible	= "st,st231-rproc";
-		memory-region	= <&gp0_reserved>;
-		resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
-		reset-names	= "sw_reset";
-		clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
-		clock-frequency	= <600000000>;
-		st,syscfg	= <&syscfg_core 0x22c>;
+		compatible = "st,st231-rproc";
+		memory-region = <&gp0_reserved>;
+		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x22c>;
 		#mbox-cells = <1>;
 		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
 	};
 
 	st231_delta: st231-delta {
-		compatible	= "st,st231-rproc";
-		memory-region	= <&delta_reserved>;
-		resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
-		reset-names	= "sw_reset";
-		clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
-		clock-frequency	= <600000000>;
-		st,syscfg	= <&syscfg_core 0x224>;
+		compatible = "st,st231-rproc";
+		memory-region = <&delta_reserved>;
+		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x224>;
 		#mbox-cells = <1>;
 		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
@@ -710,78 +710,78 @@ sata1: sata@9b28000 {
 
 
 		st_dwc3: dwc3@8f94000 {
-			compatible	= "st,stih407-dwc3";
-			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
-			reg-names	= "reg-glue", "syscfg-reg";
-			st,syscfg	= <&syscfg_core>;
-			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
-					  <&softreset STIH407_MIPHY2_SOFTRESET>;
-			reset-names	= "powerdown", "softreset";
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_usb3>;
+			compatible = "st,stih407-dwc3";
+			reg = <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names = "reg-glue", "syscfg-reg";
+			st,syscfg = <&syscfg_core>;
+			resets = <&powerdown STIH407_USB3_POWERDOWN>,
+				 <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names = "powerdown", "softreset";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
 			ranges;
 
 			status = "disabled";
 
 			dwc3: dwc3@9900000 {
-				compatible	= "snps,dwc3";
-				reg		= <0x09900000 0x100000>;
-				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode		= "host";
-				phy-names	= "usb2-phy", "usb3-phy";
-				phys		= <&usb2_picophy0>,
-						  <&phy_port2 PHY_TYPE_USB3>;
+				compatible = "snps,dwc3";
+				reg = <0x09900000 0x100000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				phy-names = "usb2-phy", "usb3-phy";
+				phys = <&usb2_picophy0>,
+				       <&phy_port2 PHY_TYPE_USB3>;
 				snps,dis_u3_susphy_quirk;
 			};
 		};
 
 		/* COMMS PWM Module */
 		pwm0: pwm@9810000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9810000 0x68>;
-			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9810000 0x68>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <1>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		/* SBC PWM Module */
 		pwm1: pwm@9510000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9510000 0x68>;
-			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm1_chan0_default
-					&pinctrl_pwm1_chan1_default
-					&pinctrl_pwm1_chan2_default
-					&pinctrl_pwm1_chan3_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9510000 0x68>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm1_chan0_default
+				     &pinctrl_pwm1_chan1_default
+				     &pinctrl_pwm1_chan2_default
+				     &pinctrl_pwm1_chan3_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <4>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		rng10: rng@8a89000 {
-			compatible      = "st,rng";
-			reg		= <0x08a89000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a89000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		rng11: rng@8a8a000 {
-			compatible      = "st,rng";
-			reg		= <0x08a8a000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a8a000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		ethernet0: dwmac@9630000 {
@@ -812,36 +812,36 @@ ethernet0: dwmac@9630000 {
 		};
 
 		mailbox0: mailbox@8f00000  {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f00000 0x1000>;
-			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells	= <2>;
-			mbox-name	= "a9";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f00000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			mbox-name = "a9";
+			status = "okay";
 		};
 
 		mailbox1: mailbox@8f01000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f01000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_1";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f01000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_1";
+			status = "okay";
 		};
 
 		mailbox2: mailbox@8f02000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f02000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_0";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f02000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_0";
+			status = "okay";
 		};
 
 		mailbox3: mailbox@8f03000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f03000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_audio_video";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f03000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_audio_video";
+			status = "okay";
 		};
 
 		/* fdma audio */
@@ -913,7 +913,7 @@ sti_uni_player0: sti-uni-player@8d80000 {
 			dmas = <&fdma0 2 0 1>;
 			dma-names = "tx";
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		sti_uni_player1: sti-uni-player@8d81000 {
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 9e212b0af89d..aca43d2bdaad 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -13,7 +13,7 @@ sti-display-subsystem@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -106,7 +106,7 @@ sti_hdmi: sti-hdmi@8d04000 {
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index ce2f62cf129b..a39dd5f7bcae 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -105,7 +105,7 @@ sti-display-subsystem@0 {
 			#size-cells = <1>;
 
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -198,7 +198,7 @@ sti_hdmi: sti-hdmi@8d04000 {
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 4c72dedcd1be..2aa94605d3d4 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -175,11 +175,11 @@ demux@8a20000 {
 
 			/* tsin0 is TSA on NIMA */
 			tsin0: port {
-				tsin-num	= <0>;
+				tsin-num = <0>;
 				serial-not-parallel;
-				i2c-bus		= <&ssc2>;
-				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
-				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+				i2c-bus = <&ssc2>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
@ 2022-05-26 20:36 ` Krzysztof Kozlowski
  0 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-26 20:36 UTC (permalink / raw)
  To: Patrice Chotard, Rob Herring, Krzysztof Kozlowski,
	linux-arm-kernel, devicetree, linux-kernel
  Cc: Krzysztof Kozlowski

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Output compared with dtx_diff and fdtdump.
---
 arch/arm/boot/dts/stih407-family.dtsi | 174 +++++++++++++-------------
 arch/arm/boot/dts/stih407.dtsi        |   4 +-
 arch/arm/boot/dts/stih410.dtsi        |   4 +-
 arch/arm/boot/dts/stihxxx-b2120.dtsi  |   8 +-
 4 files changed, 95 insertions(+), 95 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 1713f7878117..33cf54cb46cc 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -137,8 +137,8 @@ picophyreset: picophyreset-controller {
 	};
 
 	irq-syscfg {
-		compatible    = "st,stih407-irq-syscfg";
-		st,syscfg     = <&syscfg_core>;
+		compatible = "st,stih407-irq-syscfg";
+		st,syscfg = <&syscfg_core>;
 		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
 				<ST_IRQ_SYSCFG_PMU_1>;
 		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
@@ -157,8 +157,8 @@ usb2_picophy0: phy1 {
 	miphy28lp_phy: miphy28lp {
 		compatible = "st,miphy28lp-phy";
 		st,syscfg = <&syscfg_core>;
-		#address-cells	= <1>;
-		#size-cells	= <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 		ranges;
 
 		phy_port0: port@9b22000 {
@@ -208,26 +208,26 @@ phy_port2: port@8f95000 {
 	};
 
 	st231_gp0: st231-gp0 {
-		compatible	= "st,st231-rproc";
-		memory-region	= <&gp0_reserved>;
-		resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
-		reset-names	= "sw_reset";
-		clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
-		clock-frequency	= <600000000>;
-		st,syscfg	= <&syscfg_core 0x22c>;
+		compatible = "st,st231-rproc";
+		memory-region = <&gp0_reserved>;
+		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x22c>;
 		#mbox-cells = <1>;
 		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
 	};
 
 	st231_delta: st231-delta {
-		compatible	= "st,st231-rproc";
-		memory-region	= <&delta_reserved>;
-		resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
-		reset-names	= "sw_reset";
-		clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
-		clock-frequency	= <600000000>;
-		st,syscfg	= <&syscfg_core 0x224>;
+		compatible = "st,st231-rproc";
+		memory-region = <&delta_reserved>;
+		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x224>;
 		#mbox-cells = <1>;
 		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
@@ -710,78 +710,78 @@ sata1: sata@9b28000 {
 
 
 		st_dwc3: dwc3@8f94000 {
-			compatible	= "st,stih407-dwc3";
-			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
-			reg-names	= "reg-glue", "syscfg-reg";
-			st,syscfg	= <&syscfg_core>;
-			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
-					  <&softreset STIH407_MIPHY2_SOFTRESET>;
-			reset-names	= "powerdown", "softreset";
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_usb3>;
+			compatible = "st,stih407-dwc3";
+			reg = <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names = "reg-glue", "syscfg-reg";
+			st,syscfg = <&syscfg_core>;
+			resets = <&powerdown STIH407_USB3_POWERDOWN>,
+				 <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names = "powerdown", "softreset";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
 			ranges;
 
 			status = "disabled";
 
 			dwc3: dwc3@9900000 {
-				compatible	= "snps,dwc3";
-				reg		= <0x09900000 0x100000>;
-				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode		= "host";
-				phy-names	= "usb2-phy", "usb3-phy";
-				phys		= <&usb2_picophy0>,
-						  <&phy_port2 PHY_TYPE_USB3>;
+				compatible = "snps,dwc3";
+				reg = <0x09900000 0x100000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				phy-names = "usb2-phy", "usb3-phy";
+				phys = <&usb2_picophy0>,
+				       <&phy_port2 PHY_TYPE_USB3>;
 				snps,dis_u3_susphy_quirk;
 			};
 		};
 
 		/* COMMS PWM Module */
 		pwm0: pwm@9810000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9810000 0x68>;
-			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9810000 0x68>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <1>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		/* SBC PWM Module */
 		pwm1: pwm@9510000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9510000 0x68>;
-			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm1_chan0_default
-					&pinctrl_pwm1_chan1_default
-					&pinctrl_pwm1_chan2_default
-					&pinctrl_pwm1_chan3_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9510000 0x68>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm1_chan0_default
+				     &pinctrl_pwm1_chan1_default
+				     &pinctrl_pwm1_chan2_default
+				     &pinctrl_pwm1_chan3_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <4>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		rng10: rng@8a89000 {
-			compatible      = "st,rng";
-			reg		= <0x08a89000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a89000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		rng11: rng@8a8a000 {
-			compatible      = "st,rng";
-			reg		= <0x08a8a000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a8a000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		ethernet0: dwmac@9630000 {
@@ -812,36 +812,36 @@ ethernet0: dwmac@9630000 {
 		};
 
 		mailbox0: mailbox@8f00000  {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f00000 0x1000>;
-			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells	= <2>;
-			mbox-name	= "a9";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f00000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			mbox-name = "a9";
+			status = "okay";
 		};
 
 		mailbox1: mailbox@8f01000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f01000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_1";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f01000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_1";
+			status = "okay";
 		};
 
 		mailbox2: mailbox@8f02000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f02000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_0";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f02000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_0";
+			status = "okay";
 		};
 
 		mailbox3: mailbox@8f03000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f03000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_audio_video";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f03000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_audio_video";
+			status = "okay";
 		};
 
 		/* fdma audio */
@@ -913,7 +913,7 @@ sti_uni_player0: sti-uni-player@8d80000 {
 			dmas = <&fdma0 2 0 1>;
 			dma-names = "tx";
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		sti_uni_player1: sti-uni-player@8d81000 {
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 9e212b0af89d..aca43d2bdaad 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -13,7 +13,7 @@ sti-display-subsystem@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -106,7 +106,7 @@ sti_hdmi: sti-hdmi@8d04000 {
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index ce2f62cf129b..a39dd5f7bcae 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -105,7 +105,7 @@ sti-display-subsystem@0 {
 			#size-cells = <1>;
 
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -198,7 +198,7 @@ sti_hdmi: sti-hdmi@8d04000 {
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 4c72dedcd1be..2aa94605d3d4 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -175,11 +175,11 @@ demux@8a20000 {
 
 			/* tsin0 is TSA on NIMA */
 			tsin0: port {
-				tsin-num	= <0>;
+				tsin-num = <0>;
 				serial-not-parallel;
-				i2c-bus		= <&ssc2>;
-				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
-				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+				i2c-bus = <&ssc2>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: dts: stm: adjust whitespace around '='
  2022-05-26 20:36 ` Krzysztof Kozlowski
@ 2022-05-26 20:36   ` Krzysztof Kozlowski
  -1 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-26 20:36 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Maxime Coquelin,
	Alexandre Torgue, devicetree, linux-stm32, linux-arm-kernel,
	linux-kernel
  Cc: Krzysztof Kozlowski

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Output compared with dtx_diff and fdtdump.
---
 arch/arm/boot/dts/stm32429i-eval.dts    | 8 ++++----
 arch/arm/boot/dts/stm32h743.dtsi        | 4 ++--
 arch/arm/boot/dts/stm32h743i-disco.dts  | 8 ++++----
 arch/arm/boot/dts/stm32h743i-eval.dts   | 8 ++++----
 arch/arm/boot/dts/stm32h750i-art-pi.dts | 8 ++++----
 5 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 0d98aca01736..3de0e9dbe030 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -251,10 +251,10 @@ ltdc_out_rgb: endpoint {
 
 &mac {
 	status = "okay";
-	pinctrl-0	= <&ethernet_mii>;
-	pinctrl-names	= "default";
-	phy-mode	= "mii";
-	phy-handle	= <&phy1>;
+	pinctrl-0 = <&ethernet_mii>;
+	pinctrl-names = "default";
+	phy-mode = "mii";
+	phy-handle = <&phy1>;
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 91dde07a38ba..2059593da21d 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -375,7 +375,7 @@ sdmmc1: mmc@52007000 {
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -389,7 +389,7 @@ sdmmc2: mmc@48022400 {
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 59e01ce10318..2b452883a708 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -77,10 +77,10 @@ &clk_hse {
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 38cc7faf6884..5c5d8059bdc7 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -115,10 +115,10 @@ &rtc {
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts
index 9bb73bb61901..f3e70d3b65ac 100644
--- a/arch/arm/boot/dts/stm32h750i-art-pi.dts
+++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts
@@ -126,10 +126,10 @@ &dma2 {
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: dts: stm: adjust whitespace around '='
@ 2022-05-26 20:36   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-26 20:36 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Maxime Coquelin,
	Alexandre Torgue, devicetree, linux-stm32, linux-arm-kernel,
	linux-kernel
  Cc: Krzysztof Kozlowski

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Output compared with dtx_diff and fdtdump.
---
 arch/arm/boot/dts/stm32429i-eval.dts    | 8 ++++----
 arch/arm/boot/dts/stm32h743.dtsi        | 4 ++--
 arch/arm/boot/dts/stm32h743i-disco.dts  | 8 ++++----
 arch/arm/boot/dts/stm32h743i-eval.dts   | 8 ++++----
 arch/arm/boot/dts/stm32h750i-art-pi.dts | 8 ++++----
 5 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 0d98aca01736..3de0e9dbe030 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -251,10 +251,10 @@ ltdc_out_rgb: endpoint {
 
 &mac {
 	status = "okay";
-	pinctrl-0	= <&ethernet_mii>;
-	pinctrl-names	= "default";
-	phy-mode	= "mii";
-	phy-handle	= <&phy1>;
+	pinctrl-0 = <&ethernet_mii>;
+	pinctrl-names = "default";
+	phy-mode = "mii";
+	phy-handle = <&phy1>;
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 91dde07a38ba..2059593da21d 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -375,7 +375,7 @@ sdmmc1: mmc@52007000 {
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -389,7 +389,7 @@ sdmmc2: mmc@48022400 {
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 59e01ce10318..2b452883a708 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -77,10 +77,10 @@ &clk_hse {
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 38cc7faf6884..5c5d8059bdc7 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -115,10 +115,10 @@ &rtc {
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts
index 9bb73bb61901..f3e70d3b65ac 100644
--- a/arch/arm/boot/dts/stm32h750i-art-pi.dts
+++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts
@@ -126,10 +126,10 @@ &dma2 {
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
  2022-05-26 20:36 ` Krzysztof Kozlowski
@ 2022-05-30  7:45   ` Patrice CHOTARD
  -1 siblings, 0 replies; 10+ messages in thread
From: Patrice CHOTARD @ 2022-05-30  7:45 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
	linux-arm-kernel, devicetree, linux-kernel

Hi Krzysztof

On 5/26/22 22:36, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks


> 
> Output compared with dtx_diff and fdtdump.
> ---
>  arch/arm/boot/dts/stih407-family.dtsi | 174 +++++++++++++-------------
>  arch/arm/boot/dts/stih407.dtsi        |   4 +-
>  arch/arm/boot/dts/stih410.dtsi        |   4 +-
>  arch/arm/boot/dts/stihxxx-b2120.dtsi  |   8 +-
>  4 files changed, 95 insertions(+), 95 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index 1713f7878117..33cf54cb46cc 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -137,8 +137,8 @@ picophyreset: picophyreset-controller {
>  	};
>  
>  	irq-syscfg {
> -		compatible    = "st,stih407-irq-syscfg";
> -		st,syscfg     = <&syscfg_core>;
> +		compatible = "st,stih407-irq-syscfg";
> +		st,syscfg = <&syscfg_core>;
>  		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
>  				<ST_IRQ_SYSCFG_PMU_1>;
>  		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
> @@ -157,8 +157,8 @@ usb2_picophy0: phy1 {
>  	miphy28lp_phy: miphy28lp {
>  		compatible = "st,miphy28lp-phy";
>  		st,syscfg = <&syscfg_core>;
> -		#address-cells	= <1>;
> -		#size-cells	= <1>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
>  		ranges;
>  
>  		phy_port0: port@9b22000 {
> @@ -208,26 +208,26 @@ phy_port2: port@8f95000 {
>  	};
>  
>  	st231_gp0: st231-gp0 {
> -		compatible	= "st,st231-rproc";
> -		memory-region	= <&gp0_reserved>;
> -		resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
> -		reset-names	= "sw_reset";
> -		clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> -		clock-frequency	= <600000000>;
> -		st,syscfg	= <&syscfg_core 0x22c>;
> +		compatible = "st,st231-rproc";
> +		memory-region = <&gp0_reserved>;
> +		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
> +		reset-names = "sw_reset";
> +		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> +		clock-frequency = <600000000>;
> +		st,syscfg = <&syscfg_core 0x22c>;
>  		#mbox-cells = <1>;
>  		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
>  		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
>  	};
>  
>  	st231_delta: st231-delta {
> -		compatible	= "st,st231-rproc";
> -		memory-region	= <&delta_reserved>;
> -		resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
> -		reset-names	= "sw_reset";
> -		clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
> -		clock-frequency	= <600000000>;
> -		st,syscfg	= <&syscfg_core 0x224>;
> +		compatible = "st,st231-rproc";
> +		memory-region = <&delta_reserved>;
> +		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
> +		reset-names = "sw_reset";
> +		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
> +		clock-frequency = <600000000>;
> +		st,syscfg = <&syscfg_core 0x224>;
>  		#mbox-cells = <1>;
>  		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
>  		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
> @@ -710,78 +710,78 @@ sata1: sata@9b28000 {
>  
>  
>  		st_dwc3: dwc3@8f94000 {
> -			compatible	= "st,stih407-dwc3";
> -			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
> -			reg-names	= "reg-glue", "syscfg-reg";
> -			st,syscfg	= <&syscfg_core>;
> -			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
> -					  <&softreset STIH407_MIPHY2_SOFTRESET>;
> -			reset-names	= "powerdown", "softreset";
> -			#address-cells	= <1>;
> -			#size-cells	= <1>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_usb3>;
> +			compatible = "st,stih407-dwc3";
> +			reg = <0x08f94000 0x1000>, <0x110 0x4>;
> +			reg-names = "reg-glue", "syscfg-reg";
> +			st,syscfg = <&syscfg_core>;
> +			resets = <&powerdown STIH407_USB3_POWERDOWN>,
> +				 <&softreset STIH407_MIPHY2_SOFTRESET>;
> +			reset-names = "powerdown", "softreset";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb3>;
>  			ranges;
>  
>  			status = "disabled";
>  
>  			dwc3: dwc3@9900000 {
> -				compatible	= "snps,dwc3";
> -				reg		= <0x09900000 0x100000>;
> -				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> -				dr_mode		= "host";
> -				phy-names	= "usb2-phy", "usb3-phy";
> -				phys		= <&usb2_picophy0>,
> -						  <&phy_port2 PHY_TYPE_USB3>;
> +				compatible = "snps,dwc3";
> +				reg = <0x09900000 0x100000>;
> +				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> +				dr_mode = "host";
> +				phy-names = "usb2-phy", "usb3-phy";
> +				phys = <&usb2_picophy0>,
> +				       <&phy_port2 PHY_TYPE_USB3>;
>  				snps,dis_u3_susphy_quirk;
>  			};
>  		};
>  
>  		/* COMMS PWM Module */
>  		pwm0: pwm@9810000 {
> -			compatible	= "st,sti-pwm";
> -			#pwm-cells	= <2>;
> -			reg		= <0x9810000 0x68>;
> -			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
> -			clock-names	= "pwm";
> -			clocks		= <&clk_sysin>;
> +			compatible = "st,sti-pwm";
> +			#pwm-cells = <2>;
> +			reg = <0x9810000 0x68>;
> +			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
> +			clock-names = "pwm";
> +			clocks = <&clk_sysin>;
>  			st,pwm-num-chan = <1>;
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		/* SBC PWM Module */
>  		pwm1: pwm@9510000 {
> -			compatible	= "st,sti-pwm";
> -			#pwm-cells	= <2>;
> -			reg		= <0x9510000 0x68>;
> -			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_pwm1_chan0_default
> -					&pinctrl_pwm1_chan1_default
> -					&pinctrl_pwm1_chan2_default
> -					&pinctrl_pwm1_chan3_default>;
> -			clock-names	= "pwm";
> -			clocks		= <&clk_sysin>;
> +			compatible = "st,sti-pwm";
> +			#pwm-cells = <2>;
> +			reg = <0x9510000 0x68>;
> +			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_pwm1_chan0_default
> +				     &pinctrl_pwm1_chan1_default
> +				     &pinctrl_pwm1_chan2_default
> +				     &pinctrl_pwm1_chan3_default>;
> +			clock-names = "pwm";
> +			clocks = <&clk_sysin>;
>  			st,pwm-num-chan = <4>;
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		rng10: rng@8a89000 {
> -			compatible      = "st,rng";
> -			reg		= <0x08a89000 0x1000>;
> -			clocks          = <&clk_sysin>;
> -			status		= "okay";
> +			compatible = "st,rng";
> +			reg = <0x08a89000 0x1000>;
> +			clocks = <&clk_sysin>;
> +			status = "okay";
>  		};
>  
>  		rng11: rng@8a8a000 {
> -			compatible      = "st,rng";
> -			reg		= <0x08a8a000 0x1000>;
> -			clocks          = <&clk_sysin>;
> -			status		= "okay";
> +			compatible = "st,rng";
> +			reg = <0x08a8a000 0x1000>;
> +			clocks = <&clk_sysin>;
> +			status = "okay";
>  		};
>  
>  		ethernet0: dwmac@9630000 {
> @@ -812,36 +812,36 @@ ethernet0: dwmac@9630000 {
>  		};
>  
>  		mailbox0: mailbox@8f00000  {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f00000 0x1000>;
> -			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "a9";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f00000 0x1000>;
> +			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> +			#mbox-cells = <2>;
> +			mbox-name = "a9";
> +			status = "okay";
>  		};
>  
>  		mailbox1: mailbox@8f01000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f01000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_gp_1";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f01000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_gp_1";
> +			status = "okay";
>  		};
>  
>  		mailbox2: mailbox@8f02000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f02000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_gp_0";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f02000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_gp_0";
> +			status = "okay";
>  		};
>  
>  		mailbox3: mailbox@8f03000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f03000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_audio_video";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f03000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_audio_video";
> +			status = "okay";
>  		};
>  
>  		/* fdma audio */
> @@ -913,7 +913,7 @@ sti_uni_player0: sti-uni-player@8d80000 {
>  			dmas = <&fdma0 2 0 1>;
>  			dma-names = "tx";
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		sti_uni_player1: sti-uni-player@8d81000 {
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 9e212b0af89d..aca43d2bdaad 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -13,7 +13,7 @@ sti-display-subsystem@0 {
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			reg = <0 0>;
> -			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> +			assigned-clocks = <&clk_s_d2_quadfs 0>,
>  					  <&clk_s_d2_quadfs 1>,
>  					  <&clk_s_c0_pll1 0>,
>  					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -106,7 +106,7 @@ sti_hdmi: sti-hdmi@8d04000 {
>  				reg-names = "hdmi-reg";
>  				#sound-dai-cells = <0>;
>  				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> -				interrupt-names	= "irq";
> +				interrupt-names = "irq";
>  				clock-names = "pix",
>  					      "tmds",
>  					      "phy",
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index ce2f62cf129b..a39dd5f7bcae 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -105,7 +105,7 @@ sti-display-subsystem@0 {
>  			#size-cells = <1>;
>  
>  			reg = <0 0>;
> -			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> +			assigned-clocks = <&clk_s_d2_quadfs 0>,
>  					  <&clk_s_d2_quadfs 1>,
>  					  <&clk_s_c0_pll1 0>,
>  					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -198,7 +198,7 @@ sti_hdmi: sti-hdmi@8d04000 {
>  				reg-names = "hdmi-reg";
>  				#sound-dai-cells = <0>;
>  				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> -				interrupt-names	= "irq";
> +				interrupt-names = "irq";
>  				clock-names = "pix",
>  					      "tmds",
>  					      "phy",
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 4c72dedcd1be..2aa94605d3d4 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -175,11 +175,11 @@ demux@8a20000 {
>  
>  			/* tsin0 is TSA on NIMA */
>  			tsin0: port {
> -				tsin-num	= <0>;
> +				tsin-num = <0>;
>  				serial-not-parallel;
> -				i2c-bus		= <&ssc2>;
> -				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
> -				dvb-card	= <STV0367_TDA18212_NIMA_1>;
> +				i2c-bus = <&ssc2>;
> +				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
> +				dvb-card = <STV0367_TDA18212_NIMA_1>;
>  			};
>  		};
>  

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
@ 2022-05-30  7:45   ` Patrice CHOTARD
  0 siblings, 0 replies; 10+ messages in thread
From: Patrice CHOTARD @ 2022-05-30  7:45 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
	linux-arm-kernel, devicetree, linux-kernel

Hi Krzysztof

On 5/26/22 22:36, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks


> 
> Output compared with dtx_diff and fdtdump.
> ---
>  arch/arm/boot/dts/stih407-family.dtsi | 174 +++++++++++++-------------
>  arch/arm/boot/dts/stih407.dtsi        |   4 +-
>  arch/arm/boot/dts/stih410.dtsi        |   4 +-
>  arch/arm/boot/dts/stihxxx-b2120.dtsi  |   8 +-
>  4 files changed, 95 insertions(+), 95 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index 1713f7878117..33cf54cb46cc 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -137,8 +137,8 @@ picophyreset: picophyreset-controller {
>  	};
>  
>  	irq-syscfg {
> -		compatible    = "st,stih407-irq-syscfg";
> -		st,syscfg     = <&syscfg_core>;
> +		compatible = "st,stih407-irq-syscfg";
> +		st,syscfg = <&syscfg_core>;
>  		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
>  				<ST_IRQ_SYSCFG_PMU_1>;
>  		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
> @@ -157,8 +157,8 @@ usb2_picophy0: phy1 {
>  	miphy28lp_phy: miphy28lp {
>  		compatible = "st,miphy28lp-phy";
>  		st,syscfg = <&syscfg_core>;
> -		#address-cells	= <1>;
> -		#size-cells	= <1>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
>  		ranges;
>  
>  		phy_port0: port@9b22000 {
> @@ -208,26 +208,26 @@ phy_port2: port@8f95000 {
>  	};
>  
>  	st231_gp0: st231-gp0 {
> -		compatible	= "st,st231-rproc";
> -		memory-region	= <&gp0_reserved>;
> -		resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
> -		reset-names	= "sw_reset";
> -		clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> -		clock-frequency	= <600000000>;
> -		st,syscfg	= <&syscfg_core 0x22c>;
> +		compatible = "st,st231-rproc";
> +		memory-region = <&gp0_reserved>;
> +		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
> +		reset-names = "sw_reset";
> +		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> +		clock-frequency = <600000000>;
> +		st,syscfg = <&syscfg_core 0x22c>;
>  		#mbox-cells = <1>;
>  		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
>  		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
>  	};
>  
>  	st231_delta: st231-delta {
> -		compatible	= "st,st231-rproc";
> -		memory-region	= <&delta_reserved>;
> -		resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
> -		reset-names	= "sw_reset";
> -		clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
> -		clock-frequency	= <600000000>;
> -		st,syscfg	= <&syscfg_core 0x224>;
> +		compatible = "st,st231-rproc";
> +		memory-region = <&delta_reserved>;
> +		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
> +		reset-names = "sw_reset";
> +		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
> +		clock-frequency = <600000000>;
> +		st,syscfg = <&syscfg_core 0x224>;
>  		#mbox-cells = <1>;
>  		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
>  		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
> @@ -710,78 +710,78 @@ sata1: sata@9b28000 {
>  
>  
>  		st_dwc3: dwc3@8f94000 {
> -			compatible	= "st,stih407-dwc3";
> -			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
> -			reg-names	= "reg-glue", "syscfg-reg";
> -			st,syscfg	= <&syscfg_core>;
> -			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
> -					  <&softreset STIH407_MIPHY2_SOFTRESET>;
> -			reset-names	= "powerdown", "softreset";
> -			#address-cells	= <1>;
> -			#size-cells	= <1>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_usb3>;
> +			compatible = "st,stih407-dwc3";
> +			reg = <0x08f94000 0x1000>, <0x110 0x4>;
> +			reg-names = "reg-glue", "syscfg-reg";
> +			st,syscfg = <&syscfg_core>;
> +			resets = <&powerdown STIH407_USB3_POWERDOWN>,
> +				 <&softreset STIH407_MIPHY2_SOFTRESET>;
> +			reset-names = "powerdown", "softreset";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb3>;
>  			ranges;
>  
>  			status = "disabled";
>  
>  			dwc3: dwc3@9900000 {
> -				compatible	= "snps,dwc3";
> -				reg		= <0x09900000 0x100000>;
> -				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> -				dr_mode		= "host";
> -				phy-names	= "usb2-phy", "usb3-phy";
> -				phys		= <&usb2_picophy0>,
> -						  <&phy_port2 PHY_TYPE_USB3>;
> +				compatible = "snps,dwc3";
> +				reg = <0x09900000 0x100000>;
> +				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> +				dr_mode = "host";
> +				phy-names = "usb2-phy", "usb3-phy";
> +				phys = <&usb2_picophy0>,
> +				       <&phy_port2 PHY_TYPE_USB3>;
>  				snps,dis_u3_susphy_quirk;
>  			};
>  		};
>  
>  		/* COMMS PWM Module */
>  		pwm0: pwm@9810000 {
> -			compatible	= "st,sti-pwm";
> -			#pwm-cells	= <2>;
> -			reg		= <0x9810000 0x68>;
> -			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
> -			clock-names	= "pwm";
> -			clocks		= <&clk_sysin>;
> +			compatible = "st,sti-pwm";
> +			#pwm-cells = <2>;
> +			reg = <0x9810000 0x68>;
> +			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
> +			clock-names = "pwm";
> +			clocks = <&clk_sysin>;
>  			st,pwm-num-chan = <1>;
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		/* SBC PWM Module */
>  		pwm1: pwm@9510000 {
> -			compatible	= "st,sti-pwm";
> -			#pwm-cells	= <2>;
> -			reg		= <0x9510000 0x68>;
> -			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_pwm1_chan0_default
> -					&pinctrl_pwm1_chan1_default
> -					&pinctrl_pwm1_chan2_default
> -					&pinctrl_pwm1_chan3_default>;
> -			clock-names	= "pwm";
> -			clocks		= <&clk_sysin>;
> +			compatible = "st,sti-pwm";
> +			#pwm-cells = <2>;
> +			reg = <0x9510000 0x68>;
> +			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_pwm1_chan0_default
> +				     &pinctrl_pwm1_chan1_default
> +				     &pinctrl_pwm1_chan2_default
> +				     &pinctrl_pwm1_chan3_default>;
> +			clock-names = "pwm";
> +			clocks = <&clk_sysin>;
>  			st,pwm-num-chan = <4>;
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		rng10: rng@8a89000 {
> -			compatible      = "st,rng";
> -			reg		= <0x08a89000 0x1000>;
> -			clocks          = <&clk_sysin>;
> -			status		= "okay";
> +			compatible = "st,rng";
> +			reg = <0x08a89000 0x1000>;
> +			clocks = <&clk_sysin>;
> +			status = "okay";
>  		};
>  
>  		rng11: rng@8a8a000 {
> -			compatible      = "st,rng";
> -			reg		= <0x08a8a000 0x1000>;
> -			clocks          = <&clk_sysin>;
> -			status		= "okay";
> +			compatible = "st,rng";
> +			reg = <0x08a8a000 0x1000>;
> +			clocks = <&clk_sysin>;
> +			status = "okay";
>  		};
>  
>  		ethernet0: dwmac@9630000 {
> @@ -812,36 +812,36 @@ ethernet0: dwmac@9630000 {
>  		};
>  
>  		mailbox0: mailbox@8f00000  {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f00000 0x1000>;
> -			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "a9";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f00000 0x1000>;
> +			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> +			#mbox-cells = <2>;
> +			mbox-name = "a9";
> +			status = "okay";
>  		};
>  
>  		mailbox1: mailbox@8f01000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f01000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_gp_1";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f01000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_gp_1";
> +			status = "okay";
>  		};
>  
>  		mailbox2: mailbox@8f02000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f02000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_gp_0";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f02000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_gp_0";
> +			status = "okay";
>  		};
>  
>  		mailbox3: mailbox@8f03000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f03000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_audio_video";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f03000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_audio_video";
> +			status = "okay";
>  		};
>  
>  		/* fdma audio */
> @@ -913,7 +913,7 @@ sti_uni_player0: sti-uni-player@8d80000 {
>  			dmas = <&fdma0 2 0 1>;
>  			dma-names = "tx";
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		sti_uni_player1: sti-uni-player@8d81000 {
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 9e212b0af89d..aca43d2bdaad 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -13,7 +13,7 @@ sti-display-subsystem@0 {
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			reg = <0 0>;
> -			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> +			assigned-clocks = <&clk_s_d2_quadfs 0>,
>  					  <&clk_s_d2_quadfs 1>,
>  					  <&clk_s_c0_pll1 0>,
>  					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -106,7 +106,7 @@ sti_hdmi: sti-hdmi@8d04000 {
>  				reg-names = "hdmi-reg";
>  				#sound-dai-cells = <0>;
>  				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> -				interrupt-names	= "irq";
> +				interrupt-names = "irq";
>  				clock-names = "pix",
>  					      "tmds",
>  					      "phy",
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index ce2f62cf129b..a39dd5f7bcae 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -105,7 +105,7 @@ sti-display-subsystem@0 {
>  			#size-cells = <1>;
>  
>  			reg = <0 0>;
> -			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> +			assigned-clocks = <&clk_s_d2_quadfs 0>,
>  					  <&clk_s_d2_quadfs 1>,
>  					  <&clk_s_c0_pll1 0>,
>  					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -198,7 +198,7 @@ sti_hdmi: sti-hdmi@8d04000 {
>  				reg-names = "hdmi-reg";
>  				#sound-dai-cells = <0>;
>  				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> -				interrupt-names	= "irq";
> +				interrupt-names = "irq";
>  				clock-names = "pix",
>  					      "tmds",
>  					      "phy",
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 4c72dedcd1be..2aa94605d3d4 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -175,11 +175,11 @@ demux@8a20000 {
>  
>  			/* tsin0 is TSA on NIMA */
>  			tsin0: port {
> -				tsin-num	= <0>;
> +				tsin-num = <0>;
>  				serial-not-parallel;
> -				i2c-bus		= <&ssc2>;
> -				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
> -				dvb-card	= <STV0367_TDA18212_NIMA_1>;
> +				i2c-bus = <&ssc2>;
> +				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
> +				dvb-card = <STV0367_TDA18212_NIMA_1>;
>  			};
>  		};
>  

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] ARM: dts: stm: adjust whitespace around '='
  2022-05-26 20:36   ` Krzysztof Kozlowski
@ 2022-06-13  8:07     ` Alexandre TORGUE
  -1 siblings, 0 replies; 10+ messages in thread
From: Alexandre TORGUE @ 2022-06-13  8:07 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
	Maxime Coquelin, devicetree, linux-stm32, linux-arm-kernel,
	linux-kernel

Hi Krzysztof

On 5/26/22 22:36, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Output compared with dtx_diff and fdtdump.
> ---
>   arch/arm/boot/dts/stm32429i-eval.dts    | 8 ++++----
>   arch/arm/boot/dts/stm32h743.dtsi        | 4 ++--
>   arch/arm/boot/dts/stm32h743i-disco.dts  | 8 ++++----
>   arch/arm/boot/dts/stm32h743i-eval.dts   | 8 ++++----
>   arch/arm/boot/dts/stm32h750i-art-pi.dts | 8 ++++----
>   5 files changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
> index 0d98aca01736..3de0e9dbe030 100644
> --- a/arch/arm/boot/dts/stm32429i-eval.dts
> +++ b/arch/arm/boot/dts/stm32429i-eval.dts
> @@ -251,10 +251,10 @@ ltdc_out_rgb: endpoint {
>   

Applied on stm32-next. I just slightly updated the commit title.

Thanks.
Alex

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] ARM: dts: stm: adjust whitespace around '='
@ 2022-06-13  8:07     ` Alexandre TORGUE
  0 siblings, 0 replies; 10+ messages in thread
From: Alexandre TORGUE @ 2022-06-13  8:07 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
	Maxime Coquelin, devicetree, linux-stm32, linux-arm-kernel,
	linux-kernel

Hi Krzysztof

On 5/26/22 22:36, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Output compared with dtx_diff and fdtdump.
> ---
>   arch/arm/boot/dts/stm32429i-eval.dts    | 8 ++++----
>   arch/arm/boot/dts/stm32h743.dtsi        | 4 ++--
>   arch/arm/boot/dts/stm32h743i-disco.dts  | 8 ++++----
>   arch/arm/boot/dts/stm32h743i-eval.dts   | 8 ++++----
>   arch/arm/boot/dts/stm32h750i-art-pi.dts | 8 ++++----
>   5 files changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
> index 0d98aca01736..3de0e9dbe030 100644
> --- a/arch/arm/boot/dts/stm32429i-eval.dts
> +++ b/arch/arm/boot/dts/stm32429i-eval.dts
> @@ -251,10 +251,10 @@ ltdc_out_rgb: endpoint {
>   

Applied on stm32-next. I just slightly updated the commit title.

Thanks.
Alex

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: (subset) [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
  2022-05-26 20:36 ` Krzysztof Kozlowski
@ 2022-06-16 20:47   ` Krzysztof Kozlowski
  -1 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 20:47 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Patrice Chotard, Rob Herring, linux-kernel,
	linux-arm-kernel, Krzysztof Kozlowski, devicetree

On Thu, 26 May 2022 22:36:31 +0200, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> 

Applied, thanks!

[1/2] ARM: dts: sti: adjust whitespace around '='
      https://git.kernel.org/krzk/linux/c/53f2ade4b0a36a38c3c29134586857d6db6f6dcb

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: (subset) [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
@ 2022-06-16 20:47   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 20:47 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Patrice Chotard, Rob Herring, linux-kernel,
	linux-arm-kernel, Krzysztof Kozlowski, devicetree

On Thu, 26 May 2022 22:36:31 +0200, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> 

Applied, thanks!

[1/2] ARM: dts: sti: adjust whitespace around '='
      https://git.kernel.org/krzk/linux/c/53f2ade4b0a36a38c3c29134586857d6db6f6dcb

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-06-16 20:49 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-26 20:36 [PATCH 1/2] ARM: dts: sti: adjust whitespace around '=' Krzysztof Kozlowski
2022-05-26 20:36 ` Krzysztof Kozlowski
2022-05-26 20:36 ` [PATCH 2/2] ARM: dts: stm: " Krzysztof Kozlowski
2022-05-26 20:36   ` Krzysztof Kozlowski
2022-06-13  8:07   ` Alexandre TORGUE
2022-06-13  8:07     ` Alexandre TORGUE
2022-05-30  7:45 ` [PATCH 1/2] ARM: dts: sti: " Patrice CHOTARD
2022-05-30  7:45   ` Patrice CHOTARD
2022-06-16 20:47 ` (subset) " Krzysztof Kozlowski
2022-06-16 20:47   ` Krzysztof Kozlowski

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.