From: Adrian Hunter <adrian.hunter@intel.com>
To: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>,
adrian.hunter@intel.com, ulf.hansson@linaro.org,
wsa+renesas@sang-engineering.com, shawn.lin@rock-chips.com,
yoshihiro.shimoda.uh@renesas.com, digetx@gmail.com,
quic_asutoshd@quicinc.com
Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org, quic_rampraka@quicinc.com,
quic_pragalla@quicinc.com, quic_sartgarg@quicinc.com,
quic_nitirawa@quicinc.com, quic_sayalil@quicinc.com,
Liangliang Lu <quic_luliang@quicinc.com>,
"Bao D . Nguyen" <quic_nguyenb@quicinc.com>
Subject: Re: [PATCH V6 2/5] mmc: sdhci: Capture eMMC and SD card errors
Date: Mon, 23 May 2022 10:14:57 +0300 [thread overview]
Message-ID: <2fe7d7a1-b6ab-3268-3a9b-20d79086eec6@intel.com> (raw)
In-Reply-To: <1652857340-6040-3-git-send-email-quic_c_sbhanu@quicinc.com>
On 18/05/22 10:02, Shaik Sajida Bhanu wrote:
> Add changes to capture eMMC and SD card errors.
> This is useful for debug and testing.
>
> Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com>
> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
Misplaced blank line (see below) and seems to need to be
re-based on Ulf's next branch:
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git next
Otherwise:
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
> drivers/mmc/host/sdhci.c | 59 ++++++++++++++++++++++++++++++++++++------------
> drivers/mmc/host/sdhci.h | 3 +++
> include/linux/mmc/mmc.h | 6 +++++
> 3 files changed, 53 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 7728f26..bd4372c 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -224,6 +224,7 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
> if (timedout) {
> pr_err("%s: Reset 0x%x never completed.\n",
> mmc_hostname(host->mmc), (int)mask);
> + sdhci_err_stats_inc(host, CTRL_TIMEOUT);
> sdhci_dumpregs(host);
> return;
> }
> @@ -1719,6 +1720,7 @@ static bool sdhci_send_command_retry(struct sdhci_host *host,
> if (!timeout--) {
> pr_err("%s: Controller never released inhibit bit(s).\n",
> mmc_hostname(host->mmc));
> + sdhci_err_stats_inc(host, CTRL_TIMEOUT);
> sdhci_dumpregs(host);
> cmd->error = -EIO;
> return false;
> @@ -1968,6 +1970,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
> if (timedout) {
> pr_err("%s: Internal clock never stabilised.\n",
> mmc_hostname(host->mmc));
> + sdhci_err_stats_inc(host, CTRL_TIMEOUT);
> sdhci_dumpregs(host);
> return;
> }
> @@ -1990,6 +1993,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
> if (timedout) {
> pr_err("%s: PLL clock never stabilised.\n",
> mmc_hostname(host->mmc));
> + sdhci_err_stats_inc(host, CTRL_TIMEOUT);
> sdhci_dumpregs(host);
> return;
> }
> @@ -3145,6 +3149,7 @@ static void sdhci_timeout_timer(struct timer_list *t)
> if (host->cmd && !sdhci_data_line_cmd(host->cmd)) {
> pr_err("%s: Timeout waiting for hardware cmd interrupt.\n",
> mmc_hostname(host->mmc));
> + sdhci_err_stats_inc(host, REQ_TIMEOUT);
> sdhci_dumpregs(host);
>
> host->cmd->error = -ETIMEDOUT;
> @@ -3167,6 +3172,7 @@ static void sdhci_timeout_data_timer(struct timer_list *t)
> (host->cmd && sdhci_data_line_cmd(host->cmd))) {
> pr_err("%s: Timeout waiting for hardware interrupt.\n",
> mmc_hostname(host->mmc));
> + sdhci_err_stats_inc(host, REQ_TIMEOUT);
> sdhci_dumpregs(host);
>
> if (host->data) {
> @@ -3218,17 +3224,21 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
> return;
> pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n",
> mmc_hostname(host->mmc), (unsigned)intmask);
> + sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
> sdhci_dumpregs(host);
> return;
> }
>
> if (intmask & (SDHCI_INT_TIMEOUT | SDHCI_INT_CRC |
> SDHCI_INT_END_BIT | SDHCI_INT_INDEX)) {
> - if (intmask & SDHCI_INT_TIMEOUT)
> + if (intmask & SDHCI_INT_TIMEOUT) {
> host->cmd->error = -ETIMEDOUT;
> - else
> + sdhci_err_stats_inc(host, CMD_TIMEOUT);
> + } else {
> host->cmd->error = -EILSEQ;
> -
> + if (!mmc_op_tuning(host->cmd->opcode))
> + sdhci_err_stats_inc(host, CMD_CRC);
> + }
> /* Treat data command CRC error the same as data CRC error */
> if (host->cmd->data &&
> (intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) ==
> @@ -3249,6 +3259,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
> int err = (auto_cmd_status & SDHCI_AUTO_CMD_TIMEOUT) ?
> -ETIMEDOUT :
> -EILSEQ;
Blank line better here
> + sdhci_err_stats_inc(host, AUTO_CMD);
> +
This makes double blank line
>
> if (mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
> mrq->sbc->error = err;
> @@ -3326,6 +3338,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> if (intmask & SDHCI_INT_DATA_TIMEOUT) {
> host->data_cmd = NULL;
> data_cmd->error = -ETIMEDOUT;
> + sdhci_err_stats_inc(host, CMD_TIMEOUT);
> __sdhci_finish_mrq(host, data_cmd->mrq);
> return;
> }
> @@ -3354,23 +3367,30 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>
> pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n",
> mmc_hostname(host->mmc), (unsigned)intmask);
> + sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
> sdhci_dumpregs(host);
>
> return;
> }
>
> - if (intmask & SDHCI_INT_DATA_TIMEOUT)
> + if (intmask & SDHCI_INT_DATA_TIMEOUT) {
> host->data->error = -ETIMEDOUT;
> - else if (intmask & SDHCI_INT_DATA_END_BIT)
> + sdhci_err_stats_inc(host, DAT_TIMEOUT);
> + } else if (intmask & SDHCI_INT_DATA_END_BIT) {
> host->data->error = -EILSEQ;
> - else if ((intmask & SDHCI_INT_DATA_CRC) &&
> + if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
> + sdhci_err_stats_inc(host, DAT_CRC);
> + } else if ((intmask & SDHCI_INT_DATA_CRC) &&
> SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
> - != MMC_BUS_TEST_R)
> + != MMC_BUS_TEST_R) {
> host->data->error = -EILSEQ;
> - else if (intmask & SDHCI_INT_ADMA_ERROR) {
> + if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
> + sdhci_err_stats_inc(host, DAT_CRC);
> + } else if (intmask & SDHCI_INT_ADMA_ERROR) {
> pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),
> intmask);
> sdhci_adma_show_error(host);
> + sdhci_err_stats_inc(host, ADMA);
> host->data->error = -EIO;
> if (host->ops->adma_workaround)
> host->ops->adma_workaround(host, intmask);
> @@ -3568,6 +3588,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
> if (unexpected) {
> pr_err("%s: Unexpected interrupt 0x%08x.\n",
> mmc_hostname(host->mmc), unexpected);
> + sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
> sdhci_dumpregs(host);
> }
>
> @@ -3889,20 +3910,27 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
> if (!host->cqe_on)
> return false;
>
> - if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC))
> + if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC)) {
> *cmd_error = -EILSEQ;
> - else if (intmask & SDHCI_INT_TIMEOUT)
> + if (!mmc_op_tuning(host->cmd->opcode))
> + sdhci_err_stats_inc(host, CMD_CRC);
> + } else if (intmask & SDHCI_INT_TIMEOUT) {
> *cmd_error = -ETIMEDOUT;
> - else
> + sdhci_err_stats_inc(host, CMD_TIMEOUT);
> + } else
> *cmd_error = 0;
>
> - if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC))
> + if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) {
> *data_error = -EILSEQ;
> - else if (intmask & SDHCI_INT_DATA_TIMEOUT)
> + if (!mmc_op_tuning(host->cmd->opcode))
> + sdhci_err_stats_inc(host, DAT_CRC);
> + } else if (intmask & SDHCI_INT_DATA_TIMEOUT) {
> *data_error = -ETIMEDOUT;
> - else if (intmask & SDHCI_INT_ADMA_ERROR)
> + sdhci_err_stats_inc(host, DAT_TIMEOUT);
> + } else if (intmask & SDHCI_INT_ADMA_ERROR) {
> *data_error = -EIO;
> - else
> + sdhci_err_stats_inc(host, ADMA);
> + } else
> *data_error = 0;
>
> /* Clear selected interrupts. */
> @@ -3918,6 +3946,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
> sdhci_writel(host, intmask, SDHCI_INT_STATUS);
> pr_err("%s: CQE: Unexpected interrupt 0x%08x.\n",
> mmc_hostname(host->mmc), intmask);
> + sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
> sdhci_dumpregs(host);
> }
>
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 6c689be..2c02ded 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -356,6 +356,9 @@ struct sdhci_adma2_64_desc {
> */
> #define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */
>
> +#define sdhci_err_stats_inc(host, err_name) \
> + mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name)
> +
> enum sdhci_cookie {
> COOKIE_UNMAPPED,
> COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index d9a65c6..9c50bc4 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -99,6 +99,12 @@ static inline bool mmc_op_multi(u32 opcode)
> opcode == MMC_READ_MULTIPLE_BLOCK;
> }
>
> +static inline bool mmc_op_tuning(u32 opcode)
> +{
> + return opcode == MMC_SEND_TUNING_BLOCK ||
> + opcode == MMC_SEND_TUNING_BLOCK_HS200;
> +}
> +
> /*
> * MMC_SWITCH argument format:
> *
next prev parent reply other threads:[~2022-05-23 7:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-18 7:02 [PATCH V6 0/5] mmc: add error statistics for eMMC and SD card Shaik Sajida Bhanu
2022-05-18 7:02 ` [PATCH V6 1/5] mmc: core: Capture eMMC and SD card errors Shaik Sajida Bhanu
2022-05-23 7:14 ` Adrian Hunter
2022-05-24 5:56 ` Sajida Bhanu (Temp)
2022-05-18 7:02 ` [PATCH V6 2/5] mmc: sdhci: " Shaik Sajida Bhanu
2022-05-23 7:14 ` Adrian Hunter [this message]
2022-05-24 5:48 ` Sajida Bhanu (Temp)
2022-05-18 7:02 ` [PATCH V6 3/5] mmc: debugfs: Add debug fs entry for mmc driver Shaik Sajida Bhanu
2022-05-23 7:15 ` Adrian Hunter
2022-05-18 7:02 ` [PATCH V6 4/5] mmc: debugfs: Add debug fs error state " Shaik Sajida Bhanu
2022-05-23 7:15 ` Adrian Hunter
2022-05-24 5:19 ` Sajida Bhanu (Temp)
2022-05-18 7:02 ` [PATCH V6 5/5] mmc: cqhci: Capture eMMC and SD card errors Shaik Sajida Bhanu
2022-05-23 7:15 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2fe7d7a1-b6ab-3268-3a9b-20d79086eec6@intel.com \
--to=adrian.hunter@intel.com \
--cc=digetx@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=quic_asutoshd@quicinc.com \
--cc=quic_c_sbhanu@quicinc.com \
--cc=quic_luliang@quicinc.com \
--cc=quic_nguyenb@quicinc.com \
--cc=quic_nitirawa@quicinc.com \
--cc=quic_pragalla@quicinc.com \
--cc=quic_rampraka@quicinc.com \
--cc=quic_sartgarg@quicinc.com \
--cc=quic_sayalil@quicinc.com \
--cc=shawn.lin@rock-chips.com \
--cc=ulf.hansson@linaro.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.